generic-library/ffmpeg
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ffmpeg/tests/checkasm/Makefile

53 lines
1.6 KiB
Makefile
Raw Normal View History

Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-11 20:32:11 +02:00
# libavcodec tests
build: miscellaneous cosmetics Restore alphabetical order in lists, break overly long lines, do some prettyprinting, add some explanatory section comments, group parts together that belong together logically.
2016-02-16 17:58:50 +01:00
# subsystems
checkasm: Add unit tests for bswapdsp Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-16 00:10:28 +02:00
AVCODECOBJS-$(CONFIG_BSWAPDSP) += bswapdsp.o
checkasm: add flacdsp decorrelate tests Reviewed-by: Henrik Gramner <henrik@gramner.com> Signed-off-by: James Almer <jamrial@gmail.com>
2015-09-17 15:22:25 -03:00
AVCODECOBJS-$(CONFIG_FLACDSP) += flacdsp.o
checkasm: add fmtconvert tests
2015-12-08 16:24:57 +01:00
AVCODECOBJS-$(CONFIG_FMTCONVERT) += fmtconvert.o
Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-11 20:32:11 +02:00
AVCODECOBJS-$(CONFIG_H264PRED) += h264pred.o
checkasm: Add unit tests for h264qpel Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-13 23:11:25 +02:00
AVCODECOBJS-$(CONFIG_H264QPEL) += h264qpel.o
Merge commit '01621202aad7e27b2a05c71d9ad7a19dfcbe17ec' * commit '01621202aad7e27b2a05c71d9ad7a19dfcbe17ec': build: miscellaneous cosmetics Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2016-05-09 15:52:05 +01:00
AVCODECOBJS-$(CONFIG_VIDEODSP) += videodsp.o
build: miscellaneous cosmetics Restore alphabetical order in lists, break overly long lines, do some prettyprinting, add some explanatory section comments, group parts together that belong together logically.
2016-02-16 17:58:50 +01:00
# decoders/encoders
Merge commit '01621202aad7e27b2a05c71d9ad7a19dfcbe17ec' * commit '01621202aad7e27b2a05c71d9ad7a19dfcbe17ec': build: miscellaneous cosmetics Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2016-05-09 15:52:05 +01:00
AVCODECOBJS-$(CONFIG_ALAC_DECODER) += alacdsp.o
AVCODECOBJS-$(CONFIG_DCA_DECODER) += synth_filter.o
checkasm: add jpeg2000dsp rct_int tests Reviewed-by: Henrik Gramner <henrik@gramner.com> Signed-off-by: James Almer <jamrial@gmail.com>
2015-09-17 23:53:37 -03:00
AVCODECOBJS-$(CONFIG_JPEG2000_DECODER) += jpeg2000dsp.o
Add pixblockdsp checkasm tests
2015-11-01 03:31:22 -08:00
AVCODECOBJS-$(CONFIG_PIXBLOCKDSP) += pixblockdsp.o
checkasm: add unit tests for v210enc Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-09-06 01:06:12 +02:00
AVCODECOBJS-$(CONFIG_V210_ENCODER) += v210enc.o
checkasm: add vp9 MC tests.
2015-09-15 16:41:29 -04:00
AVCODECOBJS-$(CONFIG_VP9_DECODER) += vp9dsp.o
Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-11 20:32:11 +02:00
CHECKASMOBJS-$(CONFIG_AVCODEC) += $(AVCODECOBJS-yes)
checkasm: fix dependencies for vf_blend tests They will now compile if avcodec is disabled Reviewed-by: Paul B Mahol <onemda@gmail.com> Signed-off-by: James Almer <jamrial@gmail.com>
2016-02-18 20:23:49 -03:00
# libavfilter tests
AVFILTEROBJS-$(CONFIG_BLEND_FILTER) += vf_blend.o
vf_colorspace: x86-64 SIMD (SSE2) optimizations.
2016-04-06 14:09:08 -04:00
AVFILTEROBJS-$(CONFIG_COLORSPACE_FILTER) += vf_colorspace.o
checkasm: fix dependencies for vf_blend tests They will now compile if avcodec is disabled Reviewed-by: Paul B Mahol <onemda@gmail.com> Signed-off-by: James Almer <jamrial@gmail.com>
2016-02-18 20:23:49 -03:00
CHECKASMOBJS-$(CONFIG_AVFILTER) += $(AVFILTEROBJS-yes)
Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-11 20:32:11 +02:00
-include $(SRC_PATH)/tests/checkasm/$(ARCH)/Makefile
CHECKASMOBJS += $(CHECKASMOBJS-yes) checkasm.o
CHECKASMOBJS := $(sort $(CHECKASMOBJS:%=tests/checkasm/%))
-include $(CHECKASMOBJS:.o=.d)
CHECKASMDIRS := $(sort $(dir $(CHECKASMOBJS)))
$(CHECKASMOBJS): | $(CHECKASMDIRS)
OBJDIRS += $(CHECKASMDIRS)
checkasm: Explicitly declare function prototypes Now we no longer have to rely on function pointers intentionally declared without specified argument types. This makes it easier to support functions with floating point parameters or return values as well as functions returning 64-bit values on 32-bit architectures. It also avoids having to explicitly cast strides to ptrdiff_t for example.
2015-08-16 13:00:21 +02:00
tests/checkasm/checkasm.o: CFLAGS += -Umain
Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-11 20:32:11 +02:00
CHECKASM := tests/checkasm/checkasm$(EXESUF)
checkasm: Always link statically Checkasm needs to use internal symbols that should not be made public.
2015-07-21 23:22:42 +02:00
$(CHECKASM): $(EXEOBJS) $(CHECKASMOBJS) $(FF_STATIC_DEP_LIBS)
$(LD) $(LDFLAGS) $(LDEXEFLAGS) $(LD_O) $(CHECKASMOBJS) $(FF_STATIC_DEP_LIBS) $(EXTRALIBS)
Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-11 20:32:11 +02:00
checkasm: $(CHECKASM)
checkasm/Makefile: add missing testclean target Reviewed-by: Henrik Gramner <henrik@gramner.com> Signed-off-by: James Almer <jamrial@gmail.com>
2015-09-26 16:08:04 -03:00
testclean:: checkasmclean
Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-11 20:32:11 +02:00
checkasmclean:
$(RM) $(CHECKASM) $(CLEANSUFFIXES:%=tests/checkasm/%) $(CLEANSUFFIXES:%=tests/checkasm/$(ARCH)/%)
.PHONY: checkasm
Reference in New Issue Copy Permalink