ffmpeg/libswscale/swscale_internal.h

/*
 * Copyright (C) 2001-2011 Michael Niedermayer <michaelni@gmx.at>
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#ifndef SWSCALE_SWSCALE_INTERNAL_H
#define SWSCALE_SWSCALE_INTERNAL_H

#include "config.h"

#if HAVE_ALTIVEC_H
#include <altivec.h>
#endif

#include "libavutil/avutil.h"
#include "libavutil/log.h"
#include "libavutil/pixfmt.h"
#include "libavutil/pixdesc.h"

#define STR(s)         AV_TOSTRING(s) //AV_STRINGIFY is too long

#define FAST_BGR2YV12 //use 7-bit instead of 15-bit coefficients

#define MAX_FILTER_SIZE 256

#define DITHER1XBPP

#if HAVE_BIGENDIAN
#define ALT32_CORR (-1)
#else
#define ALT32_CORR   1
#endif

#if ARCH_X86_64
#   define APCK_PTR2 8
#   define APCK_COEF 16
#   define APCK_SIZE 24
#else
#   define APCK_PTR2 4
#   define APCK_COEF 8
#   define APCK_SIZE 16
#endif

struct SwsContext;

typedef int (*SwsFunc)(struct SwsContext *context, const uint8_t* src[],
                       int srcStride[], int srcSliceY, int srcSliceH,
                       uint8_t* dst[], int dstStride[]);


/**
 * Write one line of horizontally scaled data to planar output
 * without any additional vertical scaling (or point-scaling).
 *
 * @param src     scaled source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param dest    pointer to the output plane. For >8bit
 *                output, this is in uint16_t
 * @param dstW    width of destination in pixels
 * @param dither  ordered dither array of type int16_t and size 8
 * @param offset  Dither offset
 */
typedef void (*yuv2planar1_fn) (const int16_t *src, uint8_t *dest, int dstW,
                                const uint8_t *dither, int offset);

/**
 * Write one line of horizontally scaled data to planar output
 * with multi-point vertical scaling between input pixels.
 *
 * @param filter        vertical luma/alpha scaling coefficients, 12bit [0,4096]
 * @param src           scaled luma (Y) or alpha (A) source data, 15bit for 8-10bit output,
 *                      19-bit for 16bit output (in int32_t)
 * @param filterSize    number of vertical input lines to scale
 * @param dest          pointer to output plane. For >8bit
 *                      output, this is in uint16_t
 * @param dstW          width of destination pixels
 * @param offset        Dither offset
 */
typedef void (*yuv2planarX_fn) (const int16_t *filter, int filterSize,
                                const int16_t **src, uint8_t *dest, int dstW,
                                const uint8_t *dither, int offset);

/**
 * Write one line of horizontally scaled chroma to interleaved output
 * with multi-point vertical scaling between input pixels.
 *
 * @param c             SWS scaling context
 * @param chrFilter     vertical chroma scaling coefficients, 12bit [0,4096]
 * @param chrUSrc       scaled chroma (U) source data, 15bit for 8-10bit output,
 *                      19-bit for 16bit output (in int32_t)
 * @param chrVSrc       scaled chroma (V) source data, 15bit for 8-10bit output,
 *                      19-bit for 16bit output (in int32_t)
 * @param chrFilterSize number of vertical chroma input lines to scale
 * @param dest          pointer to the output plane. For >8bit
 *                      output, this is in uint16_t
 * @param dstW          width of chroma planes
 */
typedef void (*yuv2interleavedX_fn) (struct SwsContext *c, const int16_t *chrFilter, int chrFilterSize,
                                     const int16_t **chrUSrc, const int16_t **chrVSrc,
                                     uint8_t *dest, int dstW);

/**
 * Write one line of horizontally scaled Y/U/V/A to packed-pixel YUV/RGB
 * output without any additional vertical scaling (or point-scaling). Note
 * that this function may do chroma scaling, see the "uvalpha" argument.
 *
 * @param c       SWS scaling context
 * @param lumSrc  scaled luma (Y) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param chrUSrc scaled chroma (U) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param chrVSrc scaled chroma (V) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param alpSrc  scaled alpha (A) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param dest    pointer to the output plane. For 16bit output, this is
 *                uint16_t
 * @param dstW    width of lumSrc and alpSrc in pixels, number of pixels
 *                to write into dest[]
 * @param uvalpha chroma scaling coefficient for the second line of chroma
 *                pixels, either 2048 or 0. If 0, one chroma input is used
 *                for 2 output pixels (or if the SWS_FLAG_FULL_CHR_INT flag
 *                is set, it generates 1 output pixel). If 2048, two chroma
 *                input pixels should be averaged for 2 output pixels (this
 *                only happens if SWS_FLAG_FULL_CHR_INT is not set)
 * @param y       vertical line number for this output. This does not need
 *                to be used to calculate the offset in the destination,
 *                but can be used to generate comfort noise using dithering
 *                for some output formats.
 */
typedef void (*yuv2packed1_fn) (struct SwsContext *c,  const int16_t *lumSrc,
                                const int16_t *chrUSrc[2], const int16_t *chrVSrc[2],
                                const int16_t *alpSrc,  uint8_t *dest,
                                int dstW, int uvalpha, int y);
/**
 * Write one line of horizontally scaled Y/U/V/A to packed-pixel YUV/RGB
 * output by doing bilinear scaling between two input lines.
 *
 * @param c       SWS scaling context
 * @param lumSrc  scaled luma (Y) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param chrUSrc scaled chroma (U) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param chrVSrc scaled chroma (V) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param alpSrc  scaled alpha (A) source data, 15bit for 8-10bit output,
 *                19-bit for 16bit output (in int32_t)
 * @param dest    pointer to the output plane. For 16bit output, this is
 *                uint16_t
 * @param dstW    width of lumSrc and alpSrc in pixels, number of pixels
 *                to write into dest[]
 * @param yalpha  luma/alpha scaling coefficients for the second input line.
 *                The first line's coefficients can be calculated by using
 *                4096 - yalpha
 * @param uvalpha chroma scaling coefficient for the second input line. The
 *                first line's coefficients can be calculated by using
 *                4096 - uvalpha
 * @param y       vertical line number for this output. This does not need
 *                to be used to calculate the offset in the destination,
 *                but can be used to generate comfort noise using dithering
 *                for some output formats.
 */
typedef void (*yuv2packed2_fn) (struct SwsContext *c,  const int16_t *lumSrc[2],
                                const int16_t *chrUSrc[2], const int16_t *chrVSrc[2],
                                const int16_t *alpSrc[2], uint8_t *dest,
                                int dstW, int yalpha, int uvalpha, int y);
/**
 * Write one line of horizontally scaled Y/U/V/A to packed-pixel YUV/RGB
 * output by doing multi-point vertical scaling between input pixels.
 *
 * @param c             SWS scaling context
 * @param lumFilter     vertical luma/alpha scaling coefficients, 12bit [0,4096]
 * @param lumSrc        scaled luma (Y) source data, 15bit for 8-10bit output,
 *                      19-bit for 16bit output (in int32_t)
 * @param lumFilterSize number of vertical luma/alpha input lines to scale
 * @param chrFilter     vertical chroma scaling coefficients, 12bit [0,4096]
 * @param chrUSrc       scaled chroma (U) source data, 15bit for 8-10bit output,
 *                      19-bit for 16bit output (in int32_t)
 * @param chrVSrc       scaled chroma (V) source data, 15bit for 8-10bit output,
 *                      19-bit for 16bit output (in int32_t)
 * @param chrFilterSize number of vertical chroma input lines to scale
 * @param alpSrc        scaled alpha (A) source data, 15bit for 8-10bit output,
 *                      19-bit for 16bit output (in int32_t)
 * @param dest          pointer to the output plane. For 16bit output, this is
 *                      uint16_t
 * @param dstW          width of lumSrc and alpSrc in pixels, number of pixels
 *                      to write into dest[]
 * @param y             vertical line number for this output. This does not need
 *                      to be used to calculate the offset in the destination,
 *                      but can be used to generate comfort noise using dithering
 *                      or some output formats.
 */
typedef void (*yuv2packedX_fn) (struct SwsContext *c, const int16_t *lumFilter,
                                const int16_t **lumSrc, int lumFilterSize,
                                const int16_t *chrFilter, const int16_t **chrUSrc,
                                const int16_t **chrVSrc, int chrFilterSize,
                                const int16_t **alpSrc, uint8_t *dest,
                                int dstW, int y);

/* This struct should be aligned on at least a 32-byte boundary. */
typedef struct SwsContext {
    /**
     * info on struct for av_log
     */
    const AVClass *av_class;

    /**
     * Note that src, dst, srcStride, dstStride will be copied in the
     * sws_scale() wrapper so they can be freely modified here.
     */
    SwsFunc swScale;
    int srcW;                     ///< Width  of source      luma/alpha planes.
    int srcH;                     ///< Height of source      luma/alpha planes.
    int dstH;                     ///< Height of destination luma/alpha planes.
    int chrSrcW;                  ///< Width  of source      chroma     planes.
    int chrSrcH;                  ///< Height of source      chroma     planes.
    int chrDstW;                  ///< Width  of destination chroma     planes.
    int chrDstH;                  ///< Height of destination chroma     planes.
    int lumXInc, chrXInc;
    int lumYInc, chrYInc;
    enum PixelFormat dstFormat;   ///< Destination pixel format.
    enum PixelFormat srcFormat;   ///< Source      pixel format.
    int dstFormatBpp;             ///< Number of bits per pixel of the destination pixel format.
    int srcFormatBpp;             ///< Number of bits per pixel of the source      pixel format.
    int dstBpc, srcBpc;
    int chrSrcHSubSample;         ///< Binary logarithm of horizontal subsampling factor between luma/alpha and chroma planes in source      image.
    int chrSrcVSubSample;         ///< Binary logarithm of vertical   subsampling factor between luma/alpha and chroma planes in source      image.
    int chrDstHSubSample;         ///< Binary logarithm of horizontal subsampling factor between luma/alpha and chroma planes in destination image.
    int chrDstVSubSample;         ///< Binary logarithm of vertical   subsampling factor between luma/alpha and chroma planes in destination image.
    int vChrDrop;                 ///< Binary logarithm of extra vertical subsampling factor in source image chroma planes specified by user.
    int sliceDir;                 ///< Direction that slices are fed to the scaler (1 = top-to-bottom, -1 = bottom-to-top).
    double param[2];              ///< Input parameters for scaling algorithms that need them.

    uint32_t pal_yuv[256];
    uint32_t pal_rgb[256];

    /**
     * @name Scaled horizontal lines ring buffer.
     * The horizontal scaler keeps just enough scaled lines in a ring buffer
     * so they may be passed to the vertical scaler. The pointers to the
     * allocated buffers for each line are duplicated in sequence in the ring
     * buffer to simplify indexing and avoid wrapping around between lines
     * inside the vertical scaler code. The wrapping is done before the
     * vertical scaler is called.
     */
    //@{
    int16_t **lumPixBuf;          ///< Ring buffer for scaled horizontal luma   plane lines to be fed to the vertical scaler.
    int16_t **chrUPixBuf;         ///< Ring buffer for scaled horizontal chroma plane lines to be fed to the vertical scaler.
    int16_t **chrVPixBuf;         ///< Ring buffer for scaled horizontal chroma plane lines to be fed to the vertical scaler.
    int16_t **alpPixBuf;          ///< Ring buffer for scaled horizontal alpha  plane lines to be fed to the vertical scaler.
    int       vLumBufSize;        ///< Number of vertical luma/alpha lines allocated in the ring buffer.
    int       vChrBufSize;        ///< Number of vertical chroma     lines allocated in the ring buffer.
    int       lastInLumBuf;       ///< Last scaled horizontal luma/alpha line from source in the ring buffer.
    int       lastInChrBuf;       ///< Last scaled horizontal chroma     line from source in the ring buffer.
    int       lumBufIndex;        ///< Index in ring buffer of the last scaled horizontal luma/alpha line from source.
    int       chrBufIndex;        ///< Index in ring buffer of the last scaled horizontal chroma     line from source.
    //@}

    uint8_t *formatConvBuffer;

    /**
     * @name Horizontal and vertical filters.
     * To better understand the following fields, here is a pseudo-code of
     * their usage in filtering a horizontal line:
     * @code
     * for (i = 0; i < width; i++) {
     *     dst[i] = 0;
     *     for (j = 0; j < filterSize; j++)
     *         dst[i] += src[ filterPos[i] + j ] * filter[ filterSize * i + j ];
     *     dst[i] >>= FRAC_BITS; // The actual implementation is fixed-point.
     * }
     * @endcode
     */
    //@{
    int16_t *hLumFilter;          ///< Array of horizontal filter coefficients for luma/alpha planes.
    int16_t *hChrFilter;          ///< Array of horizontal filter coefficients for chroma     planes.
    int16_t *vLumFilter;          ///< Array of vertical   filter coefficients for luma/alpha planes.
    int16_t *vChrFilter;          ///< Array of vertical   filter coefficients for chroma     planes.
    int16_t *hLumFilterPos;       ///< Array of horizontal filter starting positions for each dst[i] for luma/alpha planes.
    int16_t *hChrFilterPos;       ///< Array of horizontal filter starting positions for each dst[i] for chroma     planes.
    int16_t *vLumFilterPos;       ///< Array of vertical   filter starting positions for each dst[i] for luma/alpha planes.
    int16_t *vChrFilterPos;       ///< Array of vertical   filter starting positions for each dst[i] for chroma     planes.
    int      hLumFilterSize;      ///< Horizontal filter size for luma/alpha pixels.
    int      hChrFilterSize;      ///< Horizontal filter size for chroma     pixels.
    int      vLumFilterSize;      ///< Vertical   filter size for luma/alpha pixels.
    int      vChrFilterSize;      ///< Vertical   filter size for chroma     pixels.
    //@}

    int lumMmx2FilterCodeSize;    ///< Runtime-generated MMX2 horizontal fast bilinear scaler code size for luma/alpha planes.
    int chrMmx2FilterCodeSize;    ///< Runtime-generated MMX2 horizontal fast bilinear scaler code size for chroma     planes.
    uint8_t *lumMmx2FilterCode;   ///< Runtime-generated MMX2 horizontal fast bilinear scaler code for luma/alpha planes.
    uint8_t *chrMmx2FilterCode;   ///< Runtime-generated MMX2 horizontal fast bilinear scaler code for chroma     planes.

    int canMMX2BeUsed;

    int dstY;                     ///< Last destination vertical line output from last slice.
    int flags;                    ///< Flags passed by the user to select scaler algorithm, optimizations, subsampling, etc...
    void * yuvTable;            // pointer to the yuv->rgb table start so it can be freed()
    uint8_t * table_rV[256];
    uint8_t * table_gU[256];
    int    table_gV[256];
    uint8_t * table_bU[256];

    //Colorspace stuff
    int contrast, brightness, saturation;    // for sws_getColorspaceDetails
    int srcColorspaceTable[4];
    int dstColorspaceTable[4];
    int srcRange;                 ///< 0 = MPG YUV range, 1 = JPG YUV range (source      image).
    int dstRange;                 ///< 0 = MPG YUV range, 1 = JPG YUV range (destination image).
    int yuv2rgb_y_offset;
    int yuv2rgb_y_coeff;
    int yuv2rgb_v2r_coeff;
    int yuv2rgb_v2g_coeff;
    int yuv2rgb_u2g_coeff;
    int yuv2rgb_u2b_coeff;

#define RED_DITHER            "0*8"
#define GREEN_DITHER          "1*8"
#define BLUE_DITHER           "2*8"
#define Y_COEFF               "3*8"
#define VR_COEFF              "4*8"
#define UB_COEFF              "5*8"
#define VG_COEFF              "6*8"
#define UG_COEFF              "7*8"
#define Y_OFFSET              "8*8"
#define U_OFFSET              "9*8"
#define V_OFFSET              "10*8"
#define LUM_MMX_FILTER_OFFSET "11*8"
#define CHR_MMX_FILTER_OFFSET "11*8+4*4*256"
#define DSTW_OFFSET           "11*8+4*4*256*2" //do not change, it is hardcoded in the ASM
#define ESP_OFFSET            "11*8+4*4*256*2+8"
#define VROUNDER_OFFSET       "11*8+4*4*256*2+16"
#define U_TEMP                "11*8+4*4*256*2+24"
#define V_TEMP                "11*8+4*4*256*2+32"
#define Y_TEMP                "11*8+4*4*256*2+40"
#define ALP_MMX_FILTER_OFFSET "11*8+4*4*256*2+48"
#define UV_OFF                "11*8+4*4*256*3+48"
#define UV_OFFx2              "11*8+4*4*256*3+56"
#define DITHER16              "11*8+4*4*256*3+64"
#define DITHER32              "11*8+4*4*256*3+80"

    DECLARE_ALIGNED(8, uint64_t, redDither);
    DECLARE_ALIGNED(8, uint64_t, greenDither);
    DECLARE_ALIGNED(8, uint64_t, blueDither);

    DECLARE_ALIGNED(8, uint64_t, yCoeff);
    DECLARE_ALIGNED(8, uint64_t, vrCoeff);
    DECLARE_ALIGNED(8, uint64_t, ubCoeff);
    DECLARE_ALIGNED(8, uint64_t, vgCoeff);
    DECLARE_ALIGNED(8, uint64_t, ugCoeff);
    DECLARE_ALIGNED(8, uint64_t, yOffset);
    DECLARE_ALIGNED(8, uint64_t, uOffset);
    DECLARE_ALIGNED(8, uint64_t, vOffset);
    int32_t  lumMmxFilter[4*MAX_FILTER_SIZE];
    int32_t  chrMmxFilter[4*MAX_FILTER_SIZE];
    int dstW;                     ///< Width  of destination luma/alpha planes.
    DECLARE_ALIGNED(8, uint64_t, esp);
    DECLARE_ALIGNED(8, uint64_t, vRounder);
    DECLARE_ALIGNED(8, uint64_t, u_temp);
    DECLARE_ALIGNED(8, uint64_t, v_temp);
    DECLARE_ALIGNED(8, uint64_t, y_temp);
    int32_t  alpMmxFilter[4*MAX_FILTER_SIZE];
    // alignment of these values is not necessary, but merely here
    // to maintain the same offset across x8632 and x86-64. Once we
    // use proper offset macros in the asm, they can be removed.
    DECLARE_ALIGNED(8, ptrdiff_t, uv_off); ///< offset (in pixels) between u and v planes
    DECLARE_ALIGNED(8, ptrdiff_t, uv_offx2); ///< offset (in bytes) between u and v planes
    DECLARE_ALIGNED(8, uint16_t, dither16)[8];
    DECLARE_ALIGNED(8, uint32_t, dither32)[8];

    const uint8_t *chrDither8, *lumDither8;

#if HAVE_ALTIVEC
    vector signed short   CY;
    vector signed short   CRV;
    vector signed short   CBU;
    vector signed short   CGU;
    vector signed short   CGV;
    vector signed short   OY;
    vector unsigned short CSHIFT;
    vector signed short   *vYCoeffsBank, *vCCoeffsBank;
#endif

#if ARCH_BFIN
    DECLARE_ALIGNED(4, uint32_t, oy);
    DECLARE_ALIGNED(4, uint32_t, oc);
    DECLARE_ALIGNED(4, uint32_t, zero);
    DECLARE_ALIGNED(4, uint32_t, cy);
    DECLARE_ALIGNED(4, uint32_t, crv);
    DECLARE_ALIGNED(4, uint32_t, rmask);
    DECLARE_ALIGNED(4, uint32_t, cbu);
    DECLARE_ALIGNED(4, uint32_t, bmask);
    DECLARE_ALIGNED(4, uint32_t, cgu);
    DECLARE_ALIGNED(4, uint32_t, cgv);
    DECLARE_ALIGNED(4, uint32_t, gmask);
#endif

#if HAVE_VIS
    DECLARE_ALIGNED(8, uint64_t, sparc_coeffs)[10];
#endif
    int use_mmx_vfilter;

    /* function pointers for swScale() */
    yuv2planar1_fn yuv2plane1;
    yuv2planarX_fn yuv2planeX;
    yuv2interleavedX_fn yuv2nv12cX;
    yuv2packed1_fn yuv2packed1;
    yuv2packed2_fn yuv2packed2;
    yuv2packedX_fn yuv2packedX;

    void (*lumToYV12)(uint8_t *dst, const uint8_t *src, const uint8_t *src2, const uint8_t *src3,
                      int width, uint32_t *pal); ///< Unscaled conversion of luma plane to YV12 for horizontal scaler.
    void (*alpToYV12)(uint8_t *dst, const uint8_t *src, const uint8_t *src2, const uint8_t *src3,
                      int width, uint32_t *pal); ///< Unscaled conversion of alpha plane to YV12 for horizontal scaler.
    void (*chrToYV12)(uint8_t *dstU, uint8_t *dstV,
                      const uint8_t *src1, const uint8_t *src2, const uint8_t *src3,
                      int width, uint32_t *pal); ///< Unscaled conversion of chroma planes to YV12 for horizontal scaler.

    /**
      * Functions to read planar input, such as planar RGB, and convert
      * internally to Y/UV.
      */
    /** @{ */
    void (*readLumPlanar)(uint8_t *dst, const uint8_t *src[4], int width);
    void (*readChrPlanar)(uint8_t *dstU, uint8_t *dstV, const uint8_t *src[4], int width);
    /** @} */

    /**
     * Scale one horizontal line of input data using a bilinear filter
     * to produce one line of output data. Compared to SwsContext->hScale(),
     * please take note of the following caveats when using these:
     * - Scaling is done using only 7bit instead of 14bit coefficients.
     * - You can use no more than 5 input pixels to produce 4 output
     *   pixels. Therefore, this filter should not be used for downscaling
     *   by more than ~20% in width (because that equals more than 5/4th
     *   downscaling and thus more than 5 pixels input per 4 pixels output).
     * - In general, bilinear filters create artifacts during downscaling
     *   (even when <20%), because one output pixel will span more than one
     *   input pixel, and thus some pixels will need edges of both neighbor
     *   pixels to interpolate the output pixel. Since you can use at most
     *   two input pixels per output pixel in bilinear scaling, this is
     *   impossible and thus downscaling by any size will create artifacts.
     * To enable this type of scaling, set SWS_FLAG_FAST_BILINEAR
     * in SwsContext->flags.
     */
    /** @{ */
    void (*hyscale_fast)(struct SwsContext *c,
                         int16_t *dst, int dstWidth,
                         const uint8_t *src, int srcW, int xInc);
    void (*hcscale_fast)(struct SwsContext *c,
                         int16_t *dst1, int16_t *dst2, int dstWidth,
                         const uint8_t *src1, const uint8_t *src2,
                         int srcW, int xInc);
    /** @} */

    /**
     * Scale one horizontal line of input data using a filter over the input
     * lines, to produce one (differently sized) line of output data.
     *
     * @param dst        pointer to destination buffer for horizontally scaled
     *                   data. If the number of bits per component of one
     *                   destination pixel (SwsContext->dstBpc) is <= 10, data
     *                   will be 15bpc in 16bits (int16_t) width. Else (i.e.
     *                   SwsContext->dstBpc == 16), data will be 19bpc in
     *                   32bits (int32_t) width.
     * @param dstW       width of destination image
     * @param src        pointer to source data to be scaled. If the number of
     *                   bits per component of a source pixel (SwsContext->srcBpc)
     *                   is 8, this is 8bpc in 8bits (uint8_t) width. Else
     *                   (i.e. SwsContext->dstBpc > 8), this is native depth
     *                   in 16bits (uint16_t) width. In other words, for 9-bit
     *                   YUV input, this is 9bpc, for 10-bit YUV input, this is
     *                   10bpc, and for 16-bit RGB or YUV, this is 16bpc.
     * @param filter     filter coefficients to be used per output pixel for
     *                   scaling. This contains 14bpp filtering coefficients.
     *                   Guaranteed to contain dstW * filterSize entries.
     * @param filterPos  position of the first input pixel to be used for
     *                   each output pixel during scaling. Guaranteed to
     *                   contain dstW entries.
     * @param filterSize the number of input coefficients to be used (and
     *                   thus the number of input pixels to be used) for
     *                   creating a single output pixel. Is aligned to 4
     *                   (and input coefficients thus padded with zeroes)
     *                   to simplify creating SIMD code.
     */
    /** @{ */
    void (*hyScale)(struct SwsContext *c, int16_t *dst, int dstW, const uint8_t *src,
                    const int16_t *filter, const int16_t *filterPos,
                    int filterSize);
    void (*hcScale)(struct SwsContext *c, int16_t *dst, int dstW, const uint8_t *src,
                    const int16_t *filter, const int16_t *filterPos,
                    int filterSize);
    /** @} */

    void (*lumConvertRange)(int16_t *dst, int width); ///< Color range conversion function for luma plane if needed.
    void (*chrConvertRange)(int16_t *dst1, int16_t *dst2, int width); ///< Color range conversion function for chroma planes if needed.

    int needs_hcscale; ///< Set if there are chroma planes to be converted.

} SwsContext;
//FIXME check init (where 0)

SwsFunc ff_yuv2rgb_get_func_ptr(SwsContext *c);
int ff_yuv2rgb_c_init_tables(SwsContext *c, const int inv_table[4],
                             int fullRange, int brightness,
                             int contrast, int saturation);

void ff_yuv2rgb_init_tables_altivec(SwsContext *c, const int inv_table[4],
                                    int brightness, int contrast, int saturation);
void updateMMXDitherTables(SwsContext *c, int dstY, int lumBufIndex, int chrBufIndex,
                           int lastInLumBuf, int lastInChrBuf);

SwsFunc ff_yuv2rgb_init_mmx(SwsContext *c);
SwsFunc ff_yuv2rgb_init_vis(SwsContext *c);
SwsFunc ff_yuv2rgb_init_mlib(SwsContext *c);
SwsFunc ff_yuv2rgb_init_altivec(SwsContext *c);
SwsFunc ff_yuv2rgb_get_func_ptr_bfin(SwsContext *c);
void ff_bfin_get_unscaled_swscale(SwsContext *c);

#if FF_API_SWS_FORMAT_NAME
/**
 * @deprecated Use av_get_pix_fmt_name() instead.
 */
attribute_deprecated
const char *sws_format_name(enum PixelFormat format);
#endif

#define is16BPS(x) \
    (av_pix_fmt_descriptors[x].comp[0].depth_minus1 == 15)

#define is9_OR_10BPS(x) \
    (av_pix_fmt_descriptors[x].comp[0].depth_minus1 == 8 || \
     av_pix_fmt_descriptors[x].comp[0].depth_minus1 == 9)

#define isNBPS(x) is9_OR_10BPS(x)

#define isBE(x) \
    (av_pix_fmt_descriptors[x].flags & PIX_FMT_BE)

#define isYUV(x) \
    (!(av_pix_fmt_descriptors[x].flags & PIX_FMT_RGB) && \
     av_pix_fmt_descriptors[x].nb_components >= 2)

#define isPlanarYUV(x) \
    ((av_pix_fmt_descriptors[x].flags & PIX_FMT_PLANAR) && \
     isYUV(x))

#define isRGB(x) \
    (av_pix_fmt_descriptors[x].flags & PIX_FMT_RGB)
#if 0 // FIXME
#define isGray(x) \
    (!(av_pix_fmt_descriptors[x].flags & PIX_FMT_PAL) && \
     av_pix_fmt_descriptors[x].nb_components <= 2)
#else
#define isGray(x)       (           \
           (x)==PIX_FMT_GRAY8       \
        || (x)==PIX_FMT_GRAY8A      \
        || (x)==PIX_FMT_GRAY16BE    \
        || (x)==PIX_FMT_GRAY16LE    \
    )
#endif

#define isRGBinInt(x)   (           \
           (x)==PIX_FMT_RGB48BE     \
        || (x)==PIX_FMT_RGB48LE     \
        || (x)==PIX_FMT_RGBA64BE    \
        || (x)==PIX_FMT_RGBA64LE    \
        || (x)==PIX_FMT_RGB32       \
        || (x)==PIX_FMT_RGB32_1     \
        || (x)==PIX_FMT_RGB24       \
        || (x)==PIX_FMT_RGB565BE    \
        || (x)==PIX_FMT_RGB565LE    \
        || (x)==PIX_FMT_RGB555BE    \
        || (x)==PIX_FMT_RGB555LE    \
        || (x)==PIX_FMT_RGB444BE    \
        || (x)==PIX_FMT_RGB444LE    \
        || (x)==PIX_FMT_RGB8        \
        || (x)==PIX_FMT_RGB4        \
        || (x)==PIX_FMT_RGB4_BYTE   \
        || (x)==PIX_FMT_MONOBLACK   \
        || (x)==PIX_FMT_MONOWHITE   \
    )
#define isBGRinInt(x)   (           \
           (x)==PIX_FMT_BGR48BE     \
        || (x)==PIX_FMT_BGR48LE     \
        || (x)==PIX_FMT_BGRA64BE    \
        || (x)==PIX_FMT_BGRA64LE    \
        || (x)==PIX_FMT_BGR32       \
        || (x)==PIX_FMT_BGR32_1     \
        || (x)==PIX_FMT_BGR24       \
        || (x)==PIX_FMT_BGR565BE    \
        || (x)==PIX_FMT_BGR565LE    \
        || (x)==PIX_FMT_BGR555BE    \
        || (x)==PIX_FMT_BGR555LE    \
        || (x)==PIX_FMT_BGR444BE    \
        || (x)==PIX_FMT_BGR444LE    \
        || (x)==PIX_FMT_BGR8        \
        || (x)==PIX_FMT_BGR4        \
        || (x)==PIX_FMT_BGR4_BYTE   \
        || (x)==PIX_FMT_MONOBLACK   \
        || (x)==PIX_FMT_MONOWHITE   \
    )

#define isRGBinBytes(x) (           \
           (x)==PIX_FMT_RGB48BE     \
        || (x)==PIX_FMT_RGB48LE     \
        || (x)==PIX_FMT_RGBA64BE    \
        || (x)==PIX_FMT_RGBA64LE    \
        || (x)==PIX_FMT_RGBA        \
        || (x)==PIX_FMT_ARGB        \
        || (x)==PIX_FMT_RGB24       \
    )
#define isBGRinBytes(x) (           \
           (x)==PIX_FMT_BGR48BE     \
        || (x)==PIX_FMT_BGR48LE     \
        || (x)==PIX_FMT_BGRA64BE    \
        || (x)==PIX_FMT_BGRA64LE    \
        || (x)==PIX_FMT_BGRA        \
        || (x)==PIX_FMT_ABGR        \
        || (x)==PIX_FMT_BGR24       \
    )

#define isAnyRGB(x)     (           \
            isRGBinInt(x)           \
        ||  isBGRinInt(x)           \
        ||  (x)==PIX_FMT_GBR24P     \
    )

#define isALPHA(x) \
    (av_pix_fmt_descriptors[x].nb_components == 2 || \
     av_pix_fmt_descriptors[x].nb_components == 4)

#if 1
#define isPacked(x)         (       \
           (x)==PIX_FMT_PAL8        \
        || (x)==PIX_FMT_YUYV422     \
        || (x)==PIX_FMT_UYVY422     \
        || (x)==PIX_FMT_Y400A       \
        ||  isRGBinInt(x)           \
        ||  isBGRinInt(x)           \
    )
#else
#define isPacked(x) (\
    (av_pix_fmt_descriptors[x].nb_components >= 2 && \
     !(av_pix_fmt_descriptors[x].flags & PIX_FMT_PLANAR)) || \
    (x) == PIX_FMT_PAL8\
    )

#endif
#define isPlanar(x) \
    (av_pix_fmt_descriptors[x].nb_components >= 2 && \
     (av_pix_fmt_descriptors[x].flags & PIX_FMT_PLANAR))

#define usePal(x) ((av_pix_fmt_descriptors[x].flags & PIX_FMT_PAL) || (x) == PIX_FMT_Y400A)

extern const uint64_t ff_dither4[2];
extern const uint64_t ff_dither8[2];
extern const uint8_t dithers[8][8][8];
extern const uint16_t dither_scale[15][16];


extern const AVClass sws_context_class;

/**
 * Set c->swScale to an unscaled converter if one exists for the specific
 * source and destination formats, bit depths, flags, etc.
 */
void ff_get_unscaled_swscale(SwsContext *c);

void ff_swscale_get_unscaled_altivec(SwsContext *c);

/**
 * Return function pointer to fastest main scaler path function depending
 * on architecture and available optimizations.
 */
SwsFunc ff_getSwsFunc(SwsContext *c);

void ff_sws_init_swScale_altivec(SwsContext *c);
void ff_sws_init_swScale_mmx(SwsContext *c);

#endif /* SWSCALE_SWSCALE_INTERNAL_H */