curl/lib/sslgen.c
2009-02-25 12:51:39 +00:00

477 lines
13 KiB
C

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* $Id$
***************************************************************************/
/* This file is for implementing all "generic" SSL functions that all libcurl
internals should use. It is then responsible for calling the proper
"backend" function.
SSL-functions in libcurl should call functions in this source file, and not
to any specific SSL-layer.
Curl_ssl_ - prefix for generic ones
Curl_ossl_ - prefix for OpenSSL ones
Curl_gtls_ - prefix for GnuTLS ones
Curl_nss_ - prefix for NSS ones
Note that this source code uses curlssl_* functions, and they are all
defines/macros #defined by the lib-specific header files.
"SSL/TLS Strong Encryption: An Introduction"
http://httpd.apache.org/docs-2.0/ssl/ssl_intro.html
*/
#include "setup.h"
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#include "urldata.h"
#define SSLGEN_C
#include "sslgen.h" /* generic SSL protos etc */
#include "ssluse.h" /* OpenSSL versions */
#include "gtls.h" /* GnuTLS versions */
#include "nssg.h" /* NSS versions */
#include "qssl.h" /* QSOSSL versions */
#include "sendf.h"
#include "rawstr.h"
#include "url.h"
#include "memory.h"
#include "progress.h"
/* The last #include file should be: */
#include "memdebug.h"
static bool safe_strequal(char* str1, char* str2)
{
if(str1 && str2)
/* both pointers point to something then compare them */
return (bool)(0 != Curl_raw_equal(str1, str2));
else
/* if both pointers are NULL then treat them as equal */
return (bool)(!str1 && !str2);
}
bool
Curl_ssl_config_matches(struct ssl_config_data* data,
struct ssl_config_data* needle)
{
if((data->version == needle->version) &&
(data->verifypeer == needle->verifypeer) &&
(data->verifyhost == needle->verifyhost) &&
safe_strequal(data->CApath, needle->CApath) &&
safe_strequal(data->CAfile, needle->CAfile) &&
safe_strequal(data->random_file, needle->random_file) &&
safe_strequal(data->egdsocket, needle->egdsocket) &&
safe_strequal(data->cipher_list, needle->cipher_list))
return TRUE;
return FALSE;
}
bool
Curl_clone_ssl_config(struct ssl_config_data *source,
struct ssl_config_data *dest)
{
dest->sessionid = source->sessionid;
dest->verifyhost = source->verifyhost;
dest->verifypeer = source->verifypeer;
dest->version = source->version;
if(source->CAfile) {
dest->CAfile = strdup(source->CAfile);
if(!dest->CAfile)
return FALSE;
}
if(source->CApath) {
dest->CApath = strdup(source->CApath);
if(!dest->CApath)
return FALSE;
}
if(source->cipher_list) {
dest->cipher_list = strdup(source->cipher_list);
if(!dest->cipher_list)
return FALSE;
}
if(source->egdsocket) {
dest->egdsocket = strdup(source->egdsocket);
if(!dest->egdsocket)
return FALSE;
}
if(source->random_file) {
dest->random_file = strdup(source->random_file);
if(!dest->random_file)
return FALSE;
}
return TRUE;
}
void Curl_free_ssl_config(struct ssl_config_data* sslc)
{
Curl_safefree(sslc->CAfile);
Curl_safefree(sslc->CApath);
Curl_safefree(sslc->cipher_list);
Curl_safefree(sslc->egdsocket);
Curl_safefree(sslc->random_file);
}
#ifdef USE_SSL
/* "global" init done? */
static bool init_ssl=FALSE;
/**
* Global SSL init
*
* @retval 0 error initializing SSL
* @retval 1 SSL initialized successfully
*/
int Curl_ssl_init(void)
{
/* make sure this is only done once */
if(init_ssl)
return 1;
init_ssl = TRUE; /* never again */
return curlssl_init();
}
/* Global cleanup */
void Curl_ssl_cleanup(void)
{
if(init_ssl) {
/* only cleanup if we did a previous init */
curlssl_cleanup();
init_ssl = FALSE;
}
}
CURLcode
Curl_ssl_connect(struct connectdata *conn, int sockindex)
{
CURLcode res;
/* mark this is being ssl-enabled from here on. */
conn->ssl[sockindex].use = TRUE;
conn->ssl[sockindex].state = ssl_connection_negotiating;
res = curlssl_connect(conn, sockindex);
if(!res)
Curl_pgrsTime(conn->data, TIMER_APPCONNECT); /* SSL is connected */
return res;
}
CURLcode
Curl_ssl_connect_nonblocking(struct connectdata *conn, int sockindex,
bool *done)
{
#ifdef curlssl_connect_nonblocking
/* mark this is being ssl requested from here on. */
conn->ssl[sockindex].use = TRUE;
return curlssl_connect_nonblocking(conn, sockindex, done);
#else
*done = TRUE; /* fallback to BLOCKING */
conn->ssl[sockindex].use = TRUE;
return curlssl_connect(conn, sockindex);
#endif /* non-blocking connect support */
}
/*
* Check if there's a session ID for the given connection in the cache, and if
* there's one suitable, it is provided. Returns TRUE when no entry matched.
*/
int Curl_ssl_getsessionid(struct connectdata *conn,
void **ssl_sessionid,
size_t *idsize) /* set 0 if unknown */
{
struct curl_ssl_session *check;
struct SessionHandle *data = conn->data;
long i;
if(!conn->ssl_config.sessionid)
/* session ID re-use is disabled */
return TRUE;
for(i=0; i< data->set.ssl.numsessions; i++) {
check = &data->state.session[i];
if(!check->sessionid)
/* not session ID means blank entry */
continue;
if(Curl_raw_equal(conn->host.name, check->name) &&
(conn->remote_port == check->remote_port) &&
Curl_ssl_config_matches(&conn->ssl_config, &check->ssl_config)) {
/* yes, we have a session ID! */
data->state.sessionage++; /* increase general age */
check->age = data->state.sessionage; /* set this as used in this age */
*ssl_sessionid = check->sessionid;
if(idsize)
*idsize = check->idsize;
return FALSE;
}
}
*ssl_sessionid = NULL;
return TRUE;
}
/*
* Kill a single session ID entry in the cache.
*/
static int kill_session(struct curl_ssl_session *session)
{
if(session->sessionid) {
/* defensive check */
/* free the ID the SSL-layer specific way */
curlssl_session_free(session->sessionid);
session->sessionid=NULL;
session->age = 0; /* fresh */
Curl_free_ssl_config(&session->ssl_config);
Curl_safefree(session->name);
session->name = NULL; /* no name */
return 0; /* ok */
}
else
return 1;
}
/*
* Store session id in the session cache. The ID passed on to this function
* must already have been extracted and allocated the proper way for the SSL
* layer. Curl_XXXX_session_free() will be called to free/kill the session ID
* later on.
*/
CURLcode Curl_ssl_addsessionid(struct connectdata *conn,
void *ssl_sessionid,
size_t idsize)
{
long i;
struct SessionHandle *data=conn->data; /* the mother of all structs */
struct curl_ssl_session *store = &data->state.session[0];
long oldest_age=data->state.session[0].age; /* zero if unused */
char *clone_host;
/* Even though session ID re-use might be disabled, that only disables USING
IT. We still store it here in case the re-using is again enabled for an
upcoming transfer */
clone_host = strdup(conn->host.name);
if(!clone_host)
return CURLE_OUT_OF_MEMORY; /* bail out */
/* Now we should add the session ID and the host name to the cache, (remove
the oldest if necessary) */
/* find an empty slot for us, or find the oldest */
for(i=1; (i<data->set.ssl.numsessions) &&
data->state.session[i].sessionid; i++) {
if(data->state.session[i].age < oldest_age) {
oldest_age = data->state.session[i].age;
store = &data->state.session[i];
}
}
if(i == data->set.ssl.numsessions)
/* cache is full, we must "kill" the oldest entry! */
kill_session(store);
else
store = &data->state.session[i]; /* use this slot */
/* now init the session struct wisely */
store->sessionid = ssl_sessionid;
store->idsize = idsize;
store->age = data->state.sessionage; /* set current age */
if (store->name)
/* free it if there's one already present */
free(store->name);
store->name = clone_host; /* clone host name */
store->remote_port = conn->remote_port; /* port number */
if(!Curl_clone_ssl_config(&conn->ssl_config, &store->ssl_config))
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
void Curl_ssl_close_all(struct SessionHandle *data)
{
long i;
/* kill the session ID cache */
if(data->state.session) {
for(i=0; i< data->set.ssl.numsessions; i++)
/* the single-killer function handles empty table slots */
kill_session(&data->state.session[i]);
/* free the cache data */
free(data->state.session);
data->state.session = NULL;
}
curlssl_close_all(data);
}
void Curl_ssl_close(struct connectdata *conn, int sockindex)
{
DEBUGASSERT((sockindex <= 1) && (sockindex >= -1));
curlssl_close(conn, sockindex);
}
CURLcode Curl_ssl_shutdown(struct connectdata *conn, int sockindex)
{
if(curlssl_shutdown(conn, sockindex))
return CURLE_SSL_SHUTDOWN_FAILED;
conn->ssl[sockindex].use = FALSE; /* get back to ordinary socket usage */
conn->ssl[sockindex].state = ssl_connection_none;
return CURLE_OK;
}
/* Selects an SSL crypto engine
*/
CURLcode Curl_ssl_set_engine(struct SessionHandle *data, const char *engine)
{
return curlssl_set_engine(data, engine);
}
/* Selects the default SSL crypto engine
*/
CURLcode Curl_ssl_set_engine_default(struct SessionHandle *data)
{
return curlssl_set_engine_default(data);
}
/* Return list of OpenSSL crypto engine names. */
struct curl_slist *Curl_ssl_engines_list(struct SessionHandle *data)
{
return curlssl_engines_list(data);
}
/* return number of sent (non-SSL) bytes */
ssize_t Curl_ssl_send(struct connectdata *conn,
int sockindex,
const void *mem,
size_t len)
{
return curlssl_send(conn, sockindex, mem, len);
}
/* return number of received (decrypted) bytes */
/*
* If the read would block (EWOULDBLOCK) we return -1. Otherwise we return
* a regular CURLcode value.
*/
ssize_t Curl_ssl_recv(struct connectdata *conn, /* connection data */
int sockindex, /* socketindex */
char *mem, /* store read data here */
size_t len) /* max amount to read */
{
ssize_t nread;
bool block = FALSE;
nread = curlssl_recv(conn, sockindex, mem, len, &block);
if(nread == -1) {
if(!block)
return 0; /* this is a true error, not EWOULDBLOCK */
else
return -1;
}
return nread;
}
/*
* This sets up a session ID cache to the specified size. Make sure this code
* is agnostic to what underlying SSL technology we use.
*/
CURLcode Curl_ssl_initsessions(struct SessionHandle *data, long amount)
{
struct curl_ssl_session *session;
if(data->state.session)
/* this is just a precaution to prevent multiple inits */
return CURLE_OK;
session = calloc(sizeof(struct curl_ssl_session), amount);
if(!session)
return CURLE_OUT_OF_MEMORY;
/* store the info in the SSL section */
data->set.ssl.numsessions = amount;
data->state.session = session;
data->state.sessionage = 1; /* this is brand new */
return CURLE_OK;
}
size_t Curl_ssl_version(char *buffer, size_t size)
{
return curlssl_version(buffer, size);
}
/*
* This function tries to determine connection status.
*
* Return codes:
* 1 means the connection is still in place
* 0 means the connection has been closed
* -1 means the connection status is unknown
*/
int Curl_ssl_check_cxn(struct connectdata *conn)
{
return curlssl_check_cxn(conn);
}
bool Curl_ssl_data_pending(const struct connectdata *conn,
int connindex)
{
return curlssl_data_pending(conn, connindex);
}
void Curl_ssl_free_certinfo(struct SessionHandle *data)
{
int i;
struct curl_certinfo *ci = &data->info.certs;
if(ci->num_of_certs) {
/* free all individual lists used */
for(i=0; i<ci->num_of_certs; i++)
curl_slist_free_all(ci->certinfo[i]);
free(ci->certinfo); /* free the actual array too */
ci->num_of_certs = 0;
}
}
#endif /* USE_SSL */