generic-library/curl
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
15f832d1c2
curl/lib/nss.c
Daniel Stenberg ad6e28073c removed space after if and while before the parenthesis for better source code 
consistency
2007-11-05 09:45:09 +00:00

1111 lines
30 KiB
C
Raw Blame History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* $Id$
***************************************************************************/
/*
* Source file for all NSS-specific code for the TLS/SSL layer. No code
* but sslgen.c should ever call or use these functions.
*/
#include "setup.h"
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#include "urldata.h"
#include "sendf.h"
#include "formdata.h" /* for the boundary function */
#include "url.h" /* for the ssl config check function */
#include "connect.h"
#include "strequal.h"
#include "select.h"
#include "sslgen.h"
#define _MPRINTF_REPLACE /* use the internal *printf() functions */
#include <curl/mprintf.h>
#ifdef USE_NSS
#include "nssg.h"
#include <nspr.h>
#include <nss.h>
#include <ssl.h>
#include <sslerr.h>
#include <secerr.h>
#include <secmod.h>
#include <sslproto.h>
#include <prtypes.h>
#include <pk11pub.h>
#include "memory.h"
#include "easyif.h" /* for Curl_convert_from_utf8 prototype */
/* The last #include file should be: */
#include "memdebug.h"
#ifndef min
#define min(a, b) ((a) < (b) ? (a) : (b))
#endif
#define SSL_DIR "/etc/pki/nssdb"
/* enough to fit the string "PEM Token #[0|1]" */
#define SLOTSIZE 13
PRFileDesc *PR_ImportTCPSocket(PRInt32 osfd);
int initialized = 0;
#define HANDSHAKE_TIMEOUT 30
typedef struct {
PRInt32 retryCount;
struct SessionHandle *data;
} pphrase_arg_t;
typedef struct {
const char *name;
int num;
PRInt32 version; /* protocol version valid for this cipher */
} cipher_s;
#ifdef NSS_ENABLE_ECC
#define ciphernum 48
#else
#define ciphernum 23
#endif
#define PK11_SETATTRS(x,id,v,l) (x)->type = (id); \
(x)->pValue=(v); (x)->ulValueLen = (l)
#define CERT_NewTempCertificate __CERT_NewTempCertificate
enum sslversion { SSL2 = 1, SSL3 = 2, TLS = 4 };
static const cipher_s cipherlist[ciphernum] = {
/* SSL2 cipher suites */
{"rc4", SSL_EN_RC4_128_WITH_MD5, SSL2},
{"rc4export", SSL_EN_RC4_128_EXPORT40_WITH_MD5, SSL2},
{"rc2", SSL_EN_RC2_128_CBC_WITH_MD5, SSL2},
{"rc2export", SSL_EN_RC2_128_CBC_EXPORT40_WITH_MD5, SSL2},
{"des", SSL_EN_DES_64_CBC_WITH_MD5, SSL2},
{"desede3", SSL_EN_DES_192_EDE3_CBC_WITH_MD5, SSL2},
/* SSL3/TLS cipher suites */
{"rsa_rc4_128_md5", SSL_RSA_WITH_RC4_128_MD5, SSL3 | TLS},
{"rsa_rc4_128_sha", SSL_RSA_WITH_RC4_128_SHA, SSL3 | TLS},
{"rsa_3des_sha", SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL3 | TLS},
{"rsa_des_sha", SSL_RSA_WITH_DES_CBC_SHA, SSL3 | TLS},
{"rsa_rc4_40_md5", SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL3 | TLS},
{"rsa_rc2_40_md5", SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5, SSL3 | TLS},
{"rsa_null_md5", SSL_RSA_WITH_NULL_MD5, SSL3 | TLS},
{"rsa_null_sha", SSL_RSA_WITH_NULL_SHA, SSL3 | TLS},
{"fips_3des_sha", SSL_RSA_FIPS_WITH_3DES_EDE_CBC_SHA, SSL3 | TLS},
{"fips_des_sha", SSL_RSA_FIPS_WITH_DES_CBC_SHA, SSL3 | TLS},
{"fortezza", SSL_FORTEZZA_DMS_WITH_FORTEZZA_CBC_SHA, SSL3 | TLS},
{"fortezza_rc4_128_sha", SSL_FORTEZZA_DMS_WITH_RC4_128_SHA, SSL3 | TLS},
{"fortezza_null", SSL_FORTEZZA_DMS_WITH_NULL_SHA, SSL3 | TLS},
/* TLS 1.0: Exportable 56-bit Cipher Suites. */
{"rsa_des_56_sha", TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA, SSL3 | TLS},
{"rsa_rc4_56_sha", TLS_RSA_EXPORT1024_WITH_RC4_56_SHA, SSL3 | TLS},
/* AES ciphers. */
{"rsa_aes_128_sha", TLS_RSA_WITH_AES_128_CBC_SHA, SSL3 | TLS},
{"rsa_aes_256_sha", TLS_RSA_WITH_AES_256_CBC_SHA, SSL3 | TLS},
#ifdef NSS_ENABLE_ECC
/* ECC ciphers. */
{"ecdh_ecdsa_null_sha", TLS_ECDH_ECDSA_WITH_NULL_SHA, TLS},
{"ecdh_ecdsa_rc4_128_sha", TLS_ECDH_ECDSA_WITH_RC4_128_SHA, TLS},
{"ecdh_ecdsa_3des_sha", TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS},
{"ecdh_ecdsa_aes_128_sha", TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, TLS},
{"ecdh_ecdsa_aes_256_sha", TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, TLS},
{"ecdhe_ecdsa_null_sha", TLS_ECDHE_ECDSA_WITH_NULL_SHA, TLS},
{"ecdhe_ecdsa_rc4_128_sha", TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, TLS},
{"ecdhe_ecdsa_3des_sha", TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS},
{"ecdhe_ecdsa_aes_128_sha", TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, TLS},
{"ecdhe_ecdsa_aes_256_sha", TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, TLS},
{"ecdh_rsa_null_sha", TLS_ECDH_RSA_WITH_NULL_SHA, TLS},
{"ecdh_rsa_128_sha", TLS_ECDH_RSA_WITH_RC4_128_SHA, TLS},
{"ecdh_rsa_3des_sha", TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, TLS},
{"ecdh_rsa_aes_128_sha", TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, TLS},
{"ecdh_rsa_aes_256_sha", TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, TLS},
{"echde_rsa_null", TLS_ECDHE_RSA_WITH_NULL_SHA, TLS},
{"ecdhe_rsa_rc4_128_sha", TLS_ECDHE_RSA_WITH_RC4_128_SHA, TLS},
{"ecdhe_rsa_3des_sha", TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, TLS},
{"ecdhe_rsa_aes_128_sha", TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, TLS},
{"ecdhe_rsa_aes_256_sha", TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS},
{"ecdh_anon_null_sha", TLS_ECDH_anon_WITH_NULL_SHA, TLS},
{"ecdh_anon_rc4_128sha", TLS_ECDH_anon_WITH_RC4_128_SHA, TLS},
{"ecdh_anon_3des_sha", TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA, TLS},
{"ecdh_anon_aes_128_sha", TLS_ECDH_anon_WITH_AES_128_CBC_SHA, TLS},
{"ecdh_anon_aes_256_sha", TLS_ECDH_anon_WITH_AES_256_CBC_SHA, TLS},
#endif
};
#ifdef HAVE_PK11_CREATEGENERICOBJECT
static const char* pem_library = "libnsspem.so";
#endif
SECMODModule* mod = NULL;
static SECStatus set_ciphers(struct SessionHandle *data, PRFileDesc * model,
char *cipher_list)
{
int i;
PRBool cipher_state[ciphernum];
PRBool found;
char *cipher;
SECStatus rv;
/* First disable all ciphers. This uses a different max value in case
* NSS adds more ciphers later we don't want them available by
* accident
*/
for(i=0; i<SSL_NumImplementedCiphers; i++) {
SSL_CipherPrefSet(model, SSL_ImplementedCiphers[i], SSL_NOT_ALLOWED);
}
/* Set every entry in our list to false */
for(i=0; i<ciphernum; i++) {
cipher_state[i] = PR_FALSE;
}
cipher = cipher_list;
while(cipher_list && (cipher_list[0])) {
while((*cipher) && (ISSPACE(*cipher)))
++cipher;
if((cipher_list = strchr(cipher, ','))) {
*cipher_list++ = '\0';
}
found = PR_FALSE;
for(i=0; i<ciphernum; i++) {
if(!strcasecmp(cipher, cipherlist[i].name)) {
cipher_state[i] = PR_TRUE;
found = PR_TRUE;
break;
}
}
if(found == PR_FALSE) {
failf(data, "Unknown cipher in list: %s", cipher);
return SECFailure;
}
if(cipher_list) {
cipher = cipher_list;
}
}
/* Finally actually enable the selected ciphers */
for(i=0; i<ciphernum; i++) {
rv = SSL_CipherPrefSet(model, cipherlist[i].num, cipher_state[i]);
if(rv != SECSuccess) {
failf(data, "Unknown cipher in cipher list");
return SECFailure;
}
}
return SECSuccess;
}
/*
* Determine whether the nickname passed in is a filename that needs to
* be loaded as a PEM or a regular NSS nickname.
*
* returns 1 for a file
* returns 0 for not a file (NSS nickname)
*/
static int is_file(const char *filename)
{
struct stat st;
if(filename == NULL)
return 0;
if(stat(filename, &st) == 0)
if(S_ISREG(st.st_mode))
return 1;
return 0;
}
static int
nss_load_cert(const char *filename, PRBool cacert)
{
#ifdef HAVE_PK11_CREATEGENERICOBJECT
CK_SLOT_ID slotID;
PK11SlotInfo * slot = NULL;
PK11GenericObject *rv;
CK_ATTRIBUTE *attrs;
CK_ATTRIBUTE theTemplate[20];
CK_BBOOL cktrue = CK_TRUE;
CK_BBOOL ckfalse = CK_FALSE;
CK_OBJECT_CLASS objClass = CKO_CERTIFICATE;
char *slotname = NULL;
#endif
CERTCertificate *cert;
char *nickname = NULL;
char *n = NULL;
/* If there is no slash in the filename it is assumed to be a regular
* NSS nickname.
*/
if(is_file(filename)) {
n = strrchr(filename, '/');
if(n)
n++;
if(!mod)
return 1;
}
else {
/* A nickname from the NSS internal database */
if(cacert)
return 0; /* You can't specify an NSS CA nickname this way */
nickname = strdup(filename);
goto done;
}
#ifdef HAVE_PK11_CREATEGENERICOBJECT
attrs = theTemplate;
/* All CA and trust objects go into slot 0. Other slots are used
* for storing certificates. With each new user certificate we increment
* the slot count. We only support 1 user certificate right now.
*/
if(cacert)
slotID = 0;
else
slotID = 1;
slotname = (char *)malloc(SLOTSIZE);
nickname = (char *)malloc(PATH_MAX);
snprintf(slotname, SLOTSIZE, "PEM Token #%ld", slotID);
snprintf(nickname, PATH_MAX, "PEM Token #%ld:%s", slotID, n);
slot = PK11_FindSlotByName(slotname);
if(!slot) {
free(slotname);
free(nickname);
return 0;
}
PK11_SETATTRS(attrs, CKA_CLASS, &objClass, sizeof(objClass) ); attrs++;
PK11_SETATTRS(attrs, CKA_TOKEN, &cktrue, sizeof(CK_BBOOL) ); attrs++;
PK11_SETATTRS(attrs, CKA_LABEL, (unsigned char *)filename,
strlen(filename)+1); attrs++;
if(cacert) {
PK11_SETATTRS(attrs, CKA_TRUST, &cktrue, sizeof(CK_BBOOL) ); attrs++;
}
else {
PK11_SETATTRS(attrs, CKA_TRUST, &ckfalse, sizeof(CK_BBOOL) ); attrs++;
}
/* This load the certificate in our PEM module into the appropriate
* slot.
*/
rv = PK11_CreateGenericObject(slot, theTemplate, 4, PR_FALSE /* isPerm */);
PK11_FreeSlot(slot);
free(slotname);
if(rv == NULL) {
free(nickname);
return 0;
}
#else
/* We don't have PK11_CreateGenericObject but a file-based cert was passed
* in. We need to fail.
*/
return 0;
#endif
done:
/* Double-check that the certificate or nickname requested exists in
* either the token or the NSS certificate database.
*/
if(!cacert) {
cert = PK11_FindCertFromNickname((char *)nickname, NULL);
/* An invalid nickname was passed in */
if(cert == NULL) {
free(nickname);
PR_SetError(SEC_ERROR_UNKNOWN_CERT, 0);
return 0;
}
CERT_DestroyCertificate(cert);
}
free(nickname);
return 1;
}
static int nss_load_key(struct connectdata *conn, char *key_file)
{
#ifdef HAVE_PK11_CREATEGENERICOBJECT
PK11SlotInfo * slot = NULL;
PK11GenericObject *rv;
CK_ATTRIBUTE *attrs;
CK_ATTRIBUTE theTemplate[20];
CK_BBOOL cktrue = CK_TRUE;
CK_OBJECT_CLASS objClass = CKO_PRIVATE_KEY;
CK_SLOT_ID slotID;
char *slotname = NULL;
pphrase_arg_t *parg = NULL;
attrs = theTemplate;
/* FIXME: grok the various file types */
slotID = 1; /* hardcoded for now */
slotname = (char *)malloc(SLOTSIZE);
snprintf(slotname, SLOTSIZE, "PEM Token #%ld", slotID);
slot = PK11_FindSlotByName(slotname);
free(slotname);
if(!slot)
return 0;
PK11_SETATTRS(attrs, CKA_CLASS, &objClass, sizeof(objClass) ); attrs++;
PK11_SETATTRS(attrs, CKA_TOKEN, &cktrue, sizeof(CK_BBOOL) ); attrs++;
PK11_SETATTRS(attrs, CKA_LABEL, (unsigned char *)key_file,
strlen(key_file)+1); attrs++;
/* When adding an encrypted key the PKCS#11 will be set as removed */
rv = PK11_CreateGenericObject(slot, theTemplate, 3, PR_FALSE /* isPerm */);
if(rv == NULL) {
PR_SetError(SEC_ERROR_BAD_KEY, 0);
return 0;
}
/* This will force the token to be seen as re-inserted */
SECMOD_WaitForAnyTokenEvent(mod, 0, 0);
PK11_IsPresent(slot);
parg = (pphrase_arg_t *) malloc(sizeof(*parg));
parg->retryCount = 0;
parg->data = conn->data;
/* parg is initialized in nss_Init_Tokens() */
if(PK11_Authenticate(slot, PR_TRUE, parg) != SECSuccess) {
free(parg);
return 0;
}
free(parg);
return 1;
#else
/* If we don't have PK11_CreateGenericObject then we can't load a file-based
* key.
*/
(void)conn; /* unused */
(void)key_file; /* unused */
return 0;
#endif
}
static int display_error(struct connectdata *conn, PRInt32 err,
const char *filename)
{
switch(err) {
case SEC_ERROR_BAD_PASSWORD:
failf(conn->data, "Unable to load client key: Incorrect password\n");
return 1;
case SEC_ERROR_UNKNOWN_CERT:
failf(conn->data, "Unable to load certificate %s\n", filename);
return 1;
default:
break;
}
return 0; /* The caller will print a generic error */
}
static int cert_stuff(struct connectdata *conn, char *cert_file, char *key_file)
{
struct SessionHandle *data = conn->data;
int rv = 0;
if(cert_file) {
rv = nss_load_cert(cert_file, PR_FALSE);
if(!rv) {
if(!display_error(conn, PR_GetError(), cert_file))
failf(data, "Unable to load client cert %d.", PR_GetError());
return 0;
}
}
if(key_file || (is_file(cert_file))) {
if(key_file)
rv = nss_load_key(conn, key_file);
else
/* In case the cert file also has the key */
rv = nss_load_key(conn, cert_file);
if(!rv) {
if(!display_error(conn, PR_GetError(), key_file))
failf(data, "Unable to load client key %d.", PR_GetError());
return 0;
}
}
return 1;
}
static char * nss_get_password(PK11SlotInfo * slot, PRBool retry, void *arg)
{
pphrase_arg_t *parg;
parg = (pphrase_arg_t *) arg;
(void)slot; /* unused */
if(retry > 2)
return NULL;
if(parg->data->set.str[STRING_KEY_PASSWD])
return (char *)PORT_Strdup((char *)parg->data->set.str[STRING_KEY_PASSWD]);
else
return NULL;
}
/* No longer ask for the password, parg has been freed */
static char * nss_no_password(PK11SlotInfo *slot, PRBool retry, void *arg)
{
(void)slot; /* unused */
(void)retry; /* unused */
(void)arg; /* unused */
return NULL;
}
static SECStatus nss_Init_Tokens(struct connectdata * conn)
{
PK11SlotList *slotList;
PK11SlotListElement *listEntry;
SECStatus ret, status = SECSuccess;
pphrase_arg_t *parg = NULL;
parg = (pphrase_arg_t *) malloc(sizeof(*parg));
parg->retryCount = 0;
parg->data = conn->data;
PK11_SetPasswordFunc(nss_get_password);
slotList =
PK11_GetAllTokens(CKM_INVALID_MECHANISM, PR_FALSE, PR_TRUE, NULL);
for(listEntry = PK11_GetFirstSafe(slotList);
listEntry; listEntry = listEntry->next) {
PK11SlotInfo *slot = listEntry->slot;
if(PK11_NeedLogin(slot) && PK11_NeedUserInit(slot)) {
if(slot == PK11_GetInternalKeySlot()) {
failf(conn->data, "The NSS database has not been initialized.\n");
}
else {
failf(conn->data, "The token %s has not been initialized.",
PK11_GetTokenName(slot));
}
PK11_FreeSlot(slot);
continue;
}
ret = PK11_Authenticate(slot, PR_TRUE, parg);
if(SECSuccess != ret) {
if(PR_GetError() == SEC_ERROR_BAD_PASSWORD)
infof(conn->data, "The password for token '%s' is incorrect\n",
PK11_GetTokenName(slot));
status = SECFailure;
break;
}
parg->retryCount = 0; /* reset counter to 0 for the next token */
PK11_FreeSlot(slot);
}
free(parg);
return status;
}
static SECStatus BadCertHandler(void *arg, PRFileDesc *sock)
{
SECStatus success = SECSuccess;
struct connectdata *conn = (struct connectdata *)arg;
PRErrorCode err = PR_GetError();
CERTCertificate *cert = NULL;
char *subject, *issuer;
if(conn->data->set.ssl.certverifyresult!=0)
return success;
conn->data->set.ssl.certverifyresult=err;
cert = SSL_PeerCertificate(sock);
subject = CERT_NameToAscii(&cert->subject);
issuer = CERT_NameToAscii(&cert->issuer);
CERT_DestroyCertificate(cert);
switch(err) {
case SEC_ERROR_CA_CERT_INVALID:
infof(conn->data, "Issuer certificate is invalid: '%s'\n", issuer);
if(conn->data->set.ssl.verifypeer)
success = SECFailure;
break;
case SEC_ERROR_UNTRUSTED_ISSUER:
if(conn->data->set.ssl.verifypeer)
success = SECFailure;
infof(conn->data, "Certificate is signed by an untrusted issuer: '%s'\n",
issuer);
break;
case SSL_ERROR_BAD_CERT_DOMAIN:
if(conn->data->set.ssl.verifypeer)
success = SECFailure;
infof(conn->data, "common name: %s (does not match '%s')\n",
subject, conn->host.dispname);
break;
case SEC_ERROR_EXPIRED_CERTIFICATE:
if(conn->data->set.ssl.verifypeer)
success = SECFailure;
infof(conn->data, "Remote Certificate has expired.\n");
break;
default:
if(conn->data->set.ssl.verifypeer)
success = SECFailure;
infof(conn->data, "Bad certificate received. Subject = '%s', "
"Issuer = '%s'\n", subject, issuer);
break;
}
if(success == SECSuccess)
infof(conn->data, "SSL certificate verify ok.\n");
PR_Free(subject);
PR_Free(issuer);
return success;
}
/**
* Inform the application that the handshake is complete.
*/
static SECStatus HandshakeCallback(PRFileDesc *sock, void *arg)
{
(void)sock;
(void)arg;
return SECSuccess;
}
static void display_conn_info(struct connectdata *conn, PRFileDesc *sock)
{
SSLChannelInfo channel;
SSLCipherSuiteInfo suite;
CERTCertificate *cert;
char *subject, *issuer, *common_name;
PRExplodedTime printableTime;
char timeString[256];
PRTime notBefore, notAfter;
if(SSL_GetChannelInfo(sock, &channel, sizeof channel) ==
SECSuccess && channel.length == sizeof channel &&
channel.cipherSuite) {
if(SSL_GetCipherSuiteInfo(channel.cipherSuite,
&suite, sizeof suite) == SECSuccess) {
infof(conn->data, "SSL connection using %s\n", suite.cipherSuiteName);
}
}
infof(conn->data, "Server certificate:\n");
cert = SSL_PeerCertificate(sock);
subject = CERT_NameToAscii(&cert->subject);
issuer = CERT_NameToAscii(&cert->issuer);
common_name = CERT_GetCommonName(&cert->subject);
infof(conn->data, "\tsubject: %s\n", subject);
CERT_GetCertTimes(cert, &notBefore, &notAfter);
PR_ExplodeTime(notBefore, PR_GMTParameters, &printableTime);
PR_FormatTime(timeString, 256, "%b %d %H:%M:%S %Y GMT", &printableTime);
infof(conn->data, "\tstart date: %s\n", timeString);
PR_ExplodeTime(notAfter, PR_GMTParameters, &printableTime);
PR_FormatTime(timeString, 256, "%b %d %H:%M:%S %Y GMT", &printableTime);
infof(conn->data, "\texpire date: %s\n", timeString);
infof(conn->data, "\tcommon name: %s\n", common_name);
infof(conn->data, "\tissuer: %s\n", issuer);
PR_Free(subject);
PR_Free(issuer);
PR_Free(common_name);
CERT_DestroyCertificate(cert);
return;
}
/**
*
* Callback to pick the SSL client certificate.
*/
static SECStatus SelectClientCert(void *arg, PRFileDesc *sock,
struct CERTDistNamesStr *caNames,
struct CERTCertificateStr **pRetCert,
struct SECKEYPrivateKeyStr **pRetKey)
{
CERTCertificate *cert;
SECKEYPrivateKey *privKey;
char *nickname = (char *)arg;
void *proto_win = NULL;
SECStatus secStatus = SECFailure;
PK11SlotInfo *slot;
(void)caNames;
proto_win = SSL_RevealPinArg(sock);
if(!nickname)
return secStatus;
cert = PK11_FindCertFromNickname(nickname, proto_win);
if(cert) {
if(!strncmp(nickname, "PEM Token", 9)) {
CK_SLOT_ID slotID = 1; /* hardcoded for now */
char * slotname = (char *)malloc(SLOTSIZE);
snprintf(slotname, SLOTSIZE, "PEM Token #%ld", slotID);
slot = PK11_FindSlotByName(slotname);
privKey = PK11_FindPrivateKeyFromCert(slot, cert, NULL);
PK11_FreeSlot(slot);
free(slotname);
if(privKey) {
secStatus = SECSuccess;
}
}
else {
privKey = PK11_FindKeyByAnyCert(cert, proto_win);
if(privKey)
secStatus = SECSuccess;
}
}
if(secStatus == SECSuccess) {
*pRetCert = cert;
*pRetKey = privKey;
}
else {
if(cert)
CERT_DestroyCertificate(cert);
}
return secStatus;
}
/**
* Global SSL init
*
* @retval 0 error initializing SSL
* @retval 1 SSL initialized successfully
*/
int Curl_nss_init(void)
{
if(!initialized)
PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 256);
/* We will actually initialize NSS later */
return 1;
}
/* Global cleanup */
void Curl_nss_cleanup(void)
{
NSS_Shutdown();
initialized = 0;
}
/*
* This function uses SSL_peek to determine connection status.
*
* Return codes:
* 1 means the connection is still in place
* 0 means the connection has been closed
* -1 means the connection status is unknown
*/
int
Curl_nss_check_cxn(struct connectdata *conn)
{
int rc;
char buf;
rc =
PR_Recv(conn->ssl[FIRSTSOCKET].handle, (void *)&buf, 1, PR_MSG_PEEK,
PR_SecondsToInterval(1));
if(rc > 0)
return 1; /* connection still in place */
if(rc == 0)
return 0; /* connection has been closed */
return -1; /* connection status unknown */
}
/*
* This function is called when an SSL connection is closed.
*/
void Curl_nss_close(struct connectdata *conn, int sockindex)
{
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
if(connssl->handle) {
PR_Close(connssl->handle);
if(connssl->client_nickname != NULL) {
free(connssl->client_nickname);
connssl->client_nickname = NULL;
}
connssl->handle = NULL;
}
}
/*
* This function is called when the 'data' struct is going away. Close
* down everything and free all resources!
*/
int Curl_nss_close_all(struct SessionHandle *data)
{
(void)data;
return 0;
}
CURLcode Curl_nss_connect(struct connectdata * conn, int sockindex)
{
PRInt32 err;
PRFileDesc *model = NULL;
PRBool ssl2, ssl3, tlsv1;
struct SessionHandle *data = conn->data;
curl_socket_t sockfd = conn->sock[sockindex];
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
SECStatus rv;
#ifdef HAVE_PK11_CREATEGENERICOBJECT
char *configstring = NULL;
#endif
char *certDir = NULL;
int curlerr;
curlerr = CURLE_SSL_CONNECT_ERROR;
/* FIXME. NSS doesn't support multiple databases open at the same time. */
if(!initialized) {
initialized = 1;
certDir = getenv("SSL_DIR"); /* Look in $SSL_DIR */
if(!certDir) {
struct stat st;
if(stat(SSL_DIR, &st) == 0)
if(S_ISDIR(st.st_mode)) {
certDir = (char *)SSL_DIR;
}
}
if(!certDir) {
rv = NSS_NoDB_Init(NULL);
}
else {
rv = NSS_Initialize(certDir, NULL, NULL, "secmod.db",
NSS_INIT_READONLY);
}
if(rv != SECSuccess) {
infof(conn->data, "Unable to initialize NSS database\n");
curlerr = CURLE_SSL_CACERT_BADFILE;
goto error;
}
NSS_SetDomesticPolicy();
#ifdef HAVE_PK11_CREATEGENERICOBJECT
configstring = (char *)malloc(PATH_MAX);
PR_snprintf(configstring, PATH_MAX, "library=%s name=PEM", pem_library);
mod = SECMOD_LoadUserModule(configstring, NULL, PR_FALSE);
free(configstring);
if(!mod || !mod->loaded) {
if(mod) {
SECMOD_DestroyModule(mod);
mod = NULL;
}
infof(data, "WARNING: failed to load NSS PEM library %s. Using OpenSSL "
"PEM certificates will not work.\n", pem_library);
}
#endif
}
model = PR_NewTCPSocket();
if(!model)
goto error;
model = SSL_ImportFD(NULL, model);
if(SSL_OptionSet(model, SSL_SECURITY, PR_TRUE) != SECSuccess)
goto error;
if(SSL_OptionSet(model, SSL_HANDSHAKE_AS_SERVER, PR_FALSE) != SECSuccess)
goto error;
if(SSL_OptionSet(model, SSL_HANDSHAKE_AS_CLIENT, PR_TRUE) != SECSuccess)
goto error;
ssl2 = ssl3 = tlsv1 = PR_FALSE;
switch (data->set.ssl.version) {
default:
case CURL_SSLVERSION_DEFAULT:
ssl2 = ssl3 = tlsv1 = PR_TRUE;
break;
case CURL_SSLVERSION_TLSv1:
tlsv1 = PR_TRUE;
break;
case CURL_SSLVERSION_SSLv2:
ssl2 = PR_TRUE;
break;
case CURL_SSLVERSION_SSLv3:
ssl3 = PR_TRUE;
break;
}
if(SSL_OptionSet(model, SSL_ENABLE_SSL2, ssl2) != SECSuccess)
goto error;
if(SSL_OptionSet(model, SSL_ENABLE_SSL3, ssl3) != SECSuccess)
goto error;
if(SSL_OptionSet(model, SSL_ENABLE_TLS, tlsv1) != SECSuccess)
goto error;
if(data->set.ssl.cipher_list) {
if(set_ciphers(data, model, data->set.ssl.cipher_list) != SECSuccess) {
curlerr = CURLE_SSL_CIPHER;
goto error;
}
}
data->set.ssl.certverifyresult=0; /* not checked yet */
if(SSL_BadCertHook(model, (SSLBadCertHandler) BadCertHandler, conn)
!= SECSuccess) {
goto error;
}
if(SSL_HandshakeCallback(model, (SSLHandshakeCallback) HandshakeCallback,
NULL) != SECSuccess)
goto error;
if(!data->set.ssl.verifypeer)
/* skip the verifying of the peer */
;
else if(data->set.ssl.CAfile) {
int rc = nss_load_cert(data->set.ssl.CAfile, PR_TRUE);
if(!rc) {
curlerr = CURLE_SSL_CACERT_BADFILE;
goto error;
}
}
else if(data->set.ssl.CApath) {
struct stat st;
PRDir *dir;
PRDirEntry *entry;
if(stat(data->set.ssl.CApath, &st) == -1) {
curlerr = CURLE_SSL_CACERT_BADFILE;
goto error;
}
if(S_ISDIR(st.st_mode)) {
int rc;
dir = PR_OpenDir(data->set.ssl.CApath);
do {
entry = PR_ReadDir(dir, PR_SKIP_BOTH | PR_SKIP_HIDDEN);
if(entry) {
char fullpath[PATH_MAX];
snprintf(fullpath, sizeof(fullpath), "%s/%s", data->set.ssl.CApath,
entry->name);
rc = nss_load_cert(fullpath, PR_TRUE);
/* FIXME: check this return value! */
}
/* This is purposefully tolerant of errors so non-PEM files
* can be in the same directory */
} while(entry != NULL);
PR_CloseDir(dir);
}
}
infof(data,
" CAfile: %s\n"
" CApath: %s\n",
data->set.ssl.CAfile ? data->set.ssl.CAfile : "none",
data->set.ssl.CApath ? data->set.ssl.CApath : "none");
if(data->set.str[STRING_CERT]) {
char *n;
char *nickname;
nickname = (char *)malloc(PATH_MAX);
if(is_file(data->set.str[STRING_CERT])) {
n = strrchr(data->set.str[STRING_CERT], '/');
if(n) {
n++; /* skip last slash */
snprintf(nickname, PATH_MAX, "PEM Token #%ld:%s", 1, n);
}
}
else {
strncpy(nickname, data->set.str[STRING_CERT], PATH_MAX);
}
if(nss_Init_Tokens(conn) != SECSuccess) {
free(nickname);
goto error;
}
if(!cert_stuff(conn, data->set.str[STRING_CERT],
data->set.str[STRING_KEY])) {
/* failf() is already done in cert_stuff() */
free(nickname);
return CURLE_SSL_CERTPROBLEM;
}
connssl->client_nickname = strdup(nickname);
if(SSL_GetClientAuthDataHook(model,
(SSLGetClientAuthData) SelectClientCert,
(void *)connssl->client_nickname) !=
SECSuccess) {
curlerr = CURLE_SSL_CERTPROBLEM;
goto error;
}
free(nickname);
PK11_SetPasswordFunc(nss_no_password);
}
else
connssl->client_nickname = NULL;
/* Import our model socket onto the existing file descriptor */
connssl->handle = PR_ImportTCPSocket(sockfd);
connssl->handle = SSL_ImportFD(model, connssl->handle);
if(!connssl->handle)
goto error;
PR_Close(model); /* We don't need this any more */
/* Force handshake on next I/O */
SSL_ResetHandshake(connssl->handle, /* asServer */ PR_FALSE);
SSL_SetURL(connssl->handle, conn->host.name);
/* Force the handshake now */
if(SSL_ForceHandshakeWithTimeout(connssl->handle,
PR_SecondsToInterval(HANDSHAKE_TIMEOUT))
!= SECSuccess) {
if(conn->data->set.ssl.certverifyresult!=0)
curlerr = CURLE_SSL_CACERT;
goto error;
}
display_conn_info(conn, connssl->handle);
return CURLE_OK;
error:
err = PR_GetError();
infof(data, "NSS error %d\n", err);
if(model)
PR_Close(model);
return curlerr;
}
/* return number of sent (non-SSL) bytes */
int Curl_nss_send(struct connectdata *conn, /* connection data */
int sockindex, /* socketindex */
void *mem, /* send this data */
size_t len) /* amount to write */
{
PRInt32 err;
struct SessionHandle *data = conn->data;
PRInt32 timeout;
int rc;
if(data->set.timeout)
timeout = PR_MillisecondsToInterval(data->set.timeout);
else
timeout = PR_MillisecondsToInterval(DEFAULT_CONNECT_TIMEOUT);
rc = PR_Send(conn->ssl[sockindex].handle, mem, (int)len, 0, timeout);
if(rc < 0) {
err = PR_GetError();
if(err == PR_IO_TIMEOUT_ERROR) {
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
failf(conn->data, "SSL write: error %d\n", err);
return -1;
}
return rc; /* number of bytes */
}
/*
* If the read would block we return -1 and set 'wouldblock' to TRUE.
* Otherwise we return the amount of data read. Other errors should return -1
* and set 'wouldblock' to FALSE.
*/
ssize_t Curl_nss_recv(struct connectdata * conn, /* connection data */
int num, /* socketindex */
char *buf, /* store read data here */
size_t buffersize, /* max amount to read */
bool * wouldblock)
{
ssize_t nread;
struct SessionHandle *data = conn->data;
PRInt32 timeout;
if(data->set.timeout)
timeout = PR_SecondsToInterval(data->set.timeout);
else
timeout = PR_MillisecondsToInterval(DEFAULT_CONNECT_TIMEOUT);
nread = PR_Recv(conn->ssl[num].handle, buf, (int)buffersize, 0, timeout);
*wouldblock = FALSE;
if(nread < 0) {
/* failed SSL read */
PRInt32 err = PR_GetError();
if(err == PR_WOULD_BLOCK_ERROR) {
*wouldblock = TRUE;
return -1; /* basically EWOULDBLOCK */
}
if(err == PR_IO_TIMEOUT_ERROR) {
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
failf(conn->data, "SSL read: errno %d", err);
return -1;
}
return nread;
}
size_t Curl_nss_version(char *buffer, size_t size)
{
return snprintf(buffer, size, "NSS/%s", NSS_VERSION);
}
#endif /* USE_NSS */
Reference in New Issue View Git Blame Copy Permalink