generic-library/curl
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0aabfd9963
curl/lib/polarssl.c
Yang Tse a0b207164c setup_once.h: refactor inclusion of <unistd.h> and <sys/socket.h> 
Inclusion of top two most included header files now done in setup_once.h
2012-12-14 17:38:18 +01:00

597 lines
17 KiB
C
Raw Blame History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 2010, 2011, Hoi-Ho Chan, <hoiho.chan@gmail.com>
* Copyright (C) 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
***************************************************************************/
/*
* Source file for all PolarSSL-specific code for the TLS/SSL layer. No code
* but sslgen.c should ever call or use these functions.
*
*/
#include "setup.h"
#ifdef USE_POLARSSL
#include <polarssl/net.h>
#include <polarssl/ssl.h>
#include <polarssl/havege.h>
#include <polarssl/certs.h>
#include <polarssl/x509.h>
#include <polarssl/version.h>
#include <polarssl/entropy.h>
#include <polarssl/ctr_drbg.h>
#if POLARSSL_VERSION_NUMBER<0x01000000
/*
Earlier versions of polarssl had no WANT_READ or WANT_WRITE, only TRY_AGAIN
*/
#define POLARSSL_ERR_NET_WANT_READ POLARSSL_ERR_NET_TRY_AGAIN
#define POLARSSL_ERR_NET_WANT_WRITE POLARSSL_ERR_NET_TRY_AGAIN
#endif
#include "urldata.h"
#include "sendf.h"
#include "inet_pton.h"
#include "polarssl.h"
#include "sslgen.h"
#include "parsedate.h"
#include "connect.h" /* for the connect timeout */
#include "select.h"
#include "rawstr.h"
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
#include "curl_memory.h"
/* The last #include file should be: */
#include "memdebug.h"
/* version dependent differences */
#if POLARSSL_VERSION_NUMBER < 0x01010000
/* the old way */
#define HAVEGE_RANDOM havege_rand
#else
/* from 1.1.0 */
#define HAVEGE_RANDOM havege_random
#endif
/* Define this to enable lots of debugging for PolarSSL */
#undef POLARSSL_DEBUG
#ifdef POLARSSL_DEBUG
static void polarssl_debug(void *context, int level, char *line)
{
struct SessionHandle *data = NULL;
if(!context)
return;
data = (struct SessionHandle *)context;
infof(data, "%s\n", line);
}
#else
#endif
static Curl_recv polarssl_recv;
static Curl_send polarssl_send;
static CURLcode
polarssl_connect_step1(struct connectdata *conn,
int sockindex)
{
struct SessionHandle *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
bool sni = TRUE; /* default is SNI enabled */
int ret = -1;
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
void *old_session = NULL;
size_t old_session_size = 0;
/* PolarSSL only supports SSLv3 and TLSv1 */
if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) {
failf(data, "PolarSSL does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3)
sni = FALSE; /* SSLv3 has no SNI */
havege_init(&connssl->hs);
/* Load the trusted CA */
memset(&connssl->cacert, 0, sizeof(x509_cert));
if(data->set.str[STRING_SSL_CAFILE]) {
ret = x509parse_crtfile(&connssl->cacert,
data->set.str[STRING_SSL_CAFILE]);
if(ret<0) {
failf(data, "Error reading ca cert file %s: -0x%04X",
data->set.str[STRING_SSL_CAFILE], ret);
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
/* Load the client certificate */
memset(&connssl->clicert, 0, sizeof(x509_cert));
if(data->set.str[STRING_CERT]) {
ret = x509parse_crtfile(&connssl->clicert,
data->set.str[STRING_CERT]);
if(ret) {
failf(data, "Error reading client cert file %s: -0x%04X",
data->set.str[STRING_CERT], -ret);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the client private key */
if(data->set.str[STRING_KEY]) {
ret = x509parse_keyfile(&connssl->rsa,
data->set.str[STRING_KEY],
data->set.str[STRING_KEY_PASSWD]);
if(ret) {
failf(data, "Error reading private key %s: -0x%04X",
data->set.str[STRING_KEY], -ret);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the CRL */
memset(&connssl->crl, 0, sizeof(x509_crl));
if(data->set.str[STRING_SSL_CRLFILE]) {
ret = x509parse_crlfile(&connssl->crl,
data->set.str[STRING_SSL_CRLFILE]);
if(ret) {
failf(data, "Error reading CRL file %s: -0x%04X",
data->set.str[STRING_SSL_CRLFILE], -ret);
return CURLE_SSL_CRL_BADFILE;
}
}
infof(data, "PolarSSL: Connecting to %s:%d\n",
conn->host.name, conn->remote_port);
if(ssl_init(&connssl->ssl)) {
failf(data, "PolarSSL: ssl_init failed");
return CURLE_SSL_CONNECT_ERROR;
}
ssl_set_endpoint(&connssl->ssl, SSL_IS_CLIENT);
ssl_set_authmode(&connssl->ssl, SSL_VERIFY_OPTIONAL);
ssl_set_rng(&connssl->ssl, HAVEGE_RANDOM,
&connssl->hs);
ssl_set_bio(&connssl->ssl,
net_recv, &conn->sock[sockindex],
net_send, &conn->sock[sockindex]);
#if POLARSSL_VERSION_NUMBER<0x01000000
ssl_set_ciphers(&connssl->ssl, ssl_default_ciphers);
#else
ssl_set_ciphersuites(&connssl->ssl, ssl_default_ciphersuites);
#endif
if(!Curl_ssl_getsessionid(conn, &old_session, &old_session_size)) {
memcpy(&connssl->ssn, old_session, old_session_size);
infof(data, "PolarSSL re-using session\n");
}
/* PolarSSL SVN revision r1316 to r1317, matching <1.2.0 is to cover Ubuntu's
1.1.4 version and the like */
#if POLARSSL_VERSION_NUMBER<0x01020000
ssl_set_session(&connssl->ssl, 1, 600,
&connssl->ssn);
#else
ssl_set_session(&connssl->ssl,
&connssl->ssn);
#endif
ssl_set_ca_chain(&connssl->ssl,
&connssl->cacert,
&connssl->crl,
conn->host.name);
ssl_set_own_cert(&connssl->ssl,
&connssl->clicert, &connssl->rsa);
if(!Curl_inet_pton(AF_INET, conn->host.name, &addr) &&
#ifdef ENABLE_IPV6
!Curl_inet_pton(AF_INET6, conn->host.name, &addr) &&
#endif
sni && ssl_set_hostname(&connssl->ssl, conn->host.name)) {
infof(data, "WARNING: failed to configure "
"server name indication (SNI) TLS extension\n");
}
#ifdef POLARSSL_DEBUG
ssl_set_dbg(&connssl->ssl, polarssl_debug, data);
#endif
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
static CURLcode
polarssl_connect_step2(struct connectdata *conn,
int sockindex)
{
int ret;
struct SessionHandle *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
char buffer[1024];
conn->recv[sockindex] = polarssl_recv;
conn->send[sockindex] = polarssl_send;
for(;;) {
if(!(ret = ssl_handshake(&connssl->ssl)))
break;
else if(ret != POLARSSL_ERR_NET_WANT_READ &&
ret != POLARSSL_ERR_NET_WANT_WRITE) {
failf(data, "ssl_handshake returned -0x%04X", -ret);
return CURLE_SSL_CONNECT_ERROR;
}
else {
if(ret == POLARSSL_ERR_NET_WANT_READ) {
connssl->connecting_state = ssl_connect_2_reading;
return CURLE_OK;
}
if(ret == POLARSSL_ERR_NET_WANT_WRITE) {
connssl->connecting_state = ssl_connect_2_writing;
return CURLE_OK;
}
failf(data, "SSL_connect failed with error %d.", ret);
return CURLE_SSL_CONNECT_ERROR;
}
}
infof(data, "PolarSSL: Handshake complete, cipher is %s\n",
#if POLARSSL_VERSION_NUMBER<0x01000000
ssl_get_cipher(&conn->ssl[sockindex].ssl)
#elif POLARSSL_VERSION_NUMBER >= 0x01010000
ssl_get_ciphersuite(&conn->ssl[sockindex].ssl)
#else
ssl_get_ciphersuite_name(&conn->ssl[sockindex].ssl)
#endif
);
ret = ssl_get_verify_result(&conn->ssl[sockindex].ssl);
if(ret && data->set.ssl.verifypeer) {
if(ret & BADCERT_EXPIRED)
failf(data, "Cert verify failed: BADCERT_EXPIRED");
if(ret & BADCERT_REVOKED) {
failf(data, "Cert verify failed: BADCERT_REVOKED");
return CURLE_SSL_CACERT;
}
if(ret & BADCERT_CN_MISMATCH)
failf(data, "Cert verify failed: BADCERT_CN_MISMATCH");
if(ret & BADCERT_NOT_TRUSTED)
failf(data, "Cert verify failed: BADCERT_NOT_TRUSTED");
return CURLE_PEER_FAILED_VERIFICATION;
}
/* PolarSSL SVN revision r1316 to r1317, matching <1.2.0 is to cover Ubuntu's
1.1.4 version and the like */
#if POLARSSL_VERSION_NUMBER<0x01020000
if(conn->ssl[sockindex].ssl.peer_cert) {
#else
if(ssl_get_peer_cert(&(connssl->ssl))) {
#endif
/* If the session was resumed, there will be no peer certs */
memset(buffer, 0, sizeof(buffer));
/* PolarSSL SVN revision r1316 to r1317, matching <1.2.0 is to cover Ubuntu's
1.1.4 version and the like */
#if POLARSSL_VERSION_NUMBER<0x01020000
if(x509parse_cert_info(buffer, sizeof(buffer), (char *)"* ",
conn->ssl[sockindex].ssl.peer_cert) != -1)
#else
if(x509parse_cert_info(buffer, sizeof(buffer), (char *)"* ",
ssl_get_peer_cert(&(connssl->ssl))) != -1)
#endif
infof(data, "Dumping cert info:\n%s\n", buffer);
}
connssl->connecting_state = ssl_connect_3;
infof(data, "SSL connected\n");
return CURLE_OK;
}
static CURLcode
polarssl_connect_step3(struct connectdata *conn,
int sockindex)
{
CURLcode retcode = CURLE_OK;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
struct SessionHandle *data = conn->data;
void *old_ssl_sessionid = NULL;
ssl_session *our_ssl_sessionid = &conn->ssl[sockindex].ssn ;
int incache;
DEBUGASSERT(ssl_connect_3 == connssl->connecting_state);
/* Save the current session data for possible re-use */
incache = !(Curl_ssl_getsessionid(conn, &old_ssl_sessionid, NULL));
if(incache) {
if(old_ssl_sessionid != our_ssl_sessionid) {
infof(data, "old SSL session ID is stale, removing\n");
Curl_ssl_delsessionid(conn, old_ssl_sessionid);
incache = FALSE;
}
}
if(!incache) {
void *new_session = malloc(sizeof(ssl_session));
if(new_session) {
memcpy(new_session, our_ssl_sessionid,
sizeof(ssl_session));
retcode = Curl_ssl_addsessionid(conn, new_session,
sizeof(ssl_session));
}
else {
retcode = CURLE_OUT_OF_MEMORY;
}
if(retcode) {
failf(data, "failed to store ssl session");
return retcode;
}
}
connssl->connecting_state = ssl_connect_done;
return CURLE_OK;
}
static ssize_t polarssl_send(struct connectdata *conn,
int sockindex,
const void *mem,
size_t len,
CURLcode *curlcode)
{
int ret = -1;
ret = ssl_write(&conn->ssl[sockindex].ssl,
(unsigned char *)mem, len);
if(ret < 0) {
*curlcode = (ret == POLARSSL_ERR_NET_WANT_WRITE) ?
CURLE_AGAIN : CURLE_SEND_ERROR;
ret = -1;
}
return ret;
}
void Curl_polarssl_close_all(struct SessionHandle *data)
{
(void)data;
}
void Curl_polarssl_close(struct connectdata *conn, int sockindex)
{
rsa_free(&conn->ssl[sockindex].rsa);
x509_free(&conn->ssl[sockindex].clicert);
x509_free(&conn->ssl[sockindex].cacert);
x509_crl_free(&conn->ssl[sockindex].crl);
ssl_free(&conn->ssl[sockindex].ssl);
}
static ssize_t polarssl_recv(struct connectdata *conn,
int num,
char *buf,
size_t buffersize,
CURLcode *curlcode)
{
int ret = -1;
ssize_t len = -1;
memset(buf, 0, buffersize);
ret = ssl_read(&conn->ssl[num].ssl, (unsigned char *)buf, buffersize);
if(ret <= 0) {
if(ret == POLARSSL_ERR_SSL_PEER_CLOSE_NOTIFY)
return 0;
*curlcode = (ret == POLARSSL_ERR_NET_WANT_READ) ?
CURLE_AGAIN : CURLE_RECV_ERROR;
return -1;
}
len = ret;
return len;
}
void Curl_polarssl_session_free(void *ptr)
{
free(ptr);
}
size_t Curl_polarssl_version(char *buffer, size_t size)
{
unsigned int version = version_get_number();
return snprintf(buffer, size, "PolarSSL/%d.%d.%d", version>>24,
(version>>16)&0xff, (version>>8)&0xff);
}
static CURLcode
polarssl_connect_common(struct connectdata *conn,
int sockindex,
bool nonblocking,
bool *done)
{
CURLcode retcode;
struct SessionHandle *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
curl_socket_t sockfd = conn->sock[sockindex];
long timeout_ms;
int what;
/* check if the connection has already been established */
if(ssl_connection_complete == connssl->state) {
*done = TRUE;
return CURLE_OK;
}
if(ssl_connect_1==connssl->connecting_state) {
/* Find out how much more time we're allowed */
timeout_ms = Curl_timeleft(data, NULL, TRUE);
if(timeout_ms < 0) {
/* no need to continue if time already is up */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
retcode = polarssl_connect_step1(conn, sockindex);
if(retcode)
return retcode;
}
while(ssl_connect_2 == connssl->connecting_state ||
ssl_connect_2_reading == connssl->connecting_state ||
ssl_connect_2_writing == connssl->connecting_state) {
/* check allowed time left */
timeout_ms = Curl_timeleft(data, NULL, TRUE);
if(timeout_ms < 0) {
/* no need to continue if time already is up */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
/* if ssl is expecting something, check if it's available. */
if(connssl->connecting_state == ssl_connect_2_reading
|| connssl->connecting_state == ssl_connect_2_writing) {
curl_socket_t writefd = ssl_connect_2_writing==
connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
curl_socket_t readfd = ssl_connect_2_reading==
connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
what = Curl_socket_ready(readfd, writefd, nonblocking?0:timeout_ms);
if(what < 0) {
/* fatal error */
failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO);
return CURLE_SSL_CONNECT_ERROR;
}
else if(0 == what) {
if(nonblocking) {
*done = FALSE;
return CURLE_OK;
}
else {
/* timeout */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
}
/* socket is readable or writable */
}
/* Run transaction, and return to the caller if it failed or if
* this connection is part of a multi handle and this loop would
* execute again. This permits the owner of a multi handle to
* abort a connection attempt before step2 has completed while
* ensuring that a client using select() or epoll() will always
* have a valid fdset to wait on.
*/
retcode = polarssl_connect_step2(conn, sockindex);
if(retcode || (nonblocking &&
(ssl_connect_2 == connssl->connecting_state ||
ssl_connect_2_reading == connssl->connecting_state ||
ssl_connect_2_writing == connssl->connecting_state)))
return retcode;
} /* repeat step2 until all transactions are done. */
if(ssl_connect_3==connssl->connecting_state) {
retcode = polarssl_connect_step3(conn, sockindex);
if(retcode)
return retcode;
}
if(ssl_connect_done==connssl->connecting_state) {
connssl->state = ssl_connection_complete;
conn->recv[sockindex] = polarssl_recv;
conn->send[sockindex] = polarssl_send;
*done = TRUE;
}
else
*done = FALSE;
/* Reset our connect state machine */
connssl->connecting_state = ssl_connect_1;
return CURLE_OK;
}
CURLcode
Curl_polarssl_connect_nonblocking(struct connectdata *conn,
int sockindex,
bool *done)
{
return polarssl_connect_common(conn, sockindex, TRUE, done);
}
CURLcode
Curl_polarssl_connect(struct connectdata *conn,
int sockindex)
{
CURLcode retcode;
bool done = FALSE;
retcode = polarssl_connect_common(conn, sockindex, FALSE, &done);
if(retcode)
return retcode;
DEBUGASSERT(done);
return CURLE_OK;
}
#endif
Reference in New Issue View Git Blame Copy Permalink