7.7.1 commit

connections were introduced

CHANGES

@@ -6,6 +6,81 @@
 
                                History of Changes
 
+Version 7.7.1
+
+Daniel (3 April 2001)
+- Puneet Pawaia pointed out two serious problems. Libcurl would attempt to
+  read bad memory during situations when an (ftp) connection attempt failed.
+  Also, the lib/Makefile.vc6 was corrected.
+
+- More investigations in the Location: following code made me realize that
+  it was not clean enough to work transparantly with persistant and non-
+  persistant connections. I think I've fixed it now.
+
+Daniel (29 March 2001)
+- Georg Horn mailed me some corrections for the Curl::easy perl interface.
+
+- Experimental ftps:// support added. It is basically FTP over SSL for the
+  control connection. It still makes all data transfers going over unencrypted
+  connections. Rainer Weikusat's ftpd-ssl server hack supports this and I used
+  that to verify the functionality.
+
+Daniel (27 March 2001)
+- Guenole Bescon discovered that if you set a CURLOPT_TIMEOUT and then tried
+  to get a file from a site and it fails, the SIGALRM would still be sent
+  after the timeout-time, quite inexpectedly!
+
+- I added an ftp transfer example to docs/examples/ and I also wrote a tiny
+  example makefile that can be used as a start when building one of the
+  examples.
+
+Version 7.7.1-beta1
+
+Daniel (26 March 2001)
+- Mohamed Lrhazi reported problems with 7.6.1 and persistant HTTP/1.0
+  connections (when the server replied a Connection: Keep-Alive) and this
+  problem was not properly dealt with in 7.7 either. A patch was posted to the
+  curl-and-php mailing list.
+
+Daniel (24 March 2001)
+- Colin Watson reported about a problem and brought a patch that corrected it,
+  which was about the man page and lines starting with a single quote (') in a
+  way that gnroff doesn't like.
+
+Daniel (23 March 2001)
+- Peter Bray reported correctly that the root makefile used make instead of
+  $(MAKE) for the test target.
+
+- Corrected the Curl::easy perl interface to use curl_easy_setopt() and not
+  curl_setopt() which was removed in 7.7!
+
+- SM provided updates on three documents (MANUAL, INSTALL and FAQ).
+
+- When following a Location:, libcurl would sometimes write to the URL string
+  in a way it shouldn't. As the pointer is passed-in to libcurl from an
+  application, we can't be allowed to write to it. The particular bug report
+  from 'nk' that brought this up was because he had a read-only URL that then
+  caused a libcurl crash!
+
+- No longer reads HEAD responses longer than to the last header. Previously,
+  curl would read the full reply if the connection was a "close" one.
+
+- libcurl did re-use connections way too much. Doing "curl
+  http://www.{microsoft,ibm}.com" would make it re-use the connection which
+  made the second request return very odd results.
+
+Daniel (22 March 2001)
+- Edin Kadribasic made me aware that curl should not re-send POST requests
+  when following 302-redirects. I made 302 work like 303 which means curl uses
+  GET in the following request(s).
+
+- libcurl now reset the "followed-location" counter on each invoke of
+  curl_easy_perform() as it otherwise would sum up all redirects on the same
+  connection and thus could reach the maxredirs counter wrongly.
+
+- Jim Drash suggested curl_escape() should not re-encode what already looks
+  like an encoded sequence and I think that's a fair suggestion.
+
 Version 7.7
 
 Daniel (22 March 2001)

Makefile.am

@@ -17,7 +17,7 @@ dist-hook:
 check: test
 
 test:
-	@(cd tests; make quiet-test)
+	@(cd tests; $(MAKE) quiet-test)
 
 #
 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: March 22, 2001 (http://curl.haxx.se/docs/faq.shtml)
+Updated: March 23, 2001 (http://curl.haxx.se/docs/faq.shtml)
                                   _   _ ____  _     
                               ___| | | |  _ \| |    
                              / __| | | | |_) | |    
@@ -12,6 +12,8 @@ FAQ
   1.2 What is libcurl?
   1.3 What is cURL not?
   1.4 When will you make curl do XXXX ?
+  1.5 Who makes cURL?
+  1.6 What do you get for making cURL?
 
  2. Install Related Problems
   2.1 configure doesn't find OpenSSL even when it is installed
@@ -84,10 +86,11 @@ FAQ
 
   1.2 What is libcurl?
 
-  libcurl is a reliable, higly portable multiprotocol file transfer library.
+  libcurl is a reliable and portable library which provides you with an easy
+  interface to a range of common internet protocols.
 
-  Any application is free to use libcurl, even commercial or closed-source
-  ones.
+  You can use libcurl for free in your application even if it is commercial
+  or closed-source.
 
   1.3 What is cURL not?
   
@@ -141,6 +144,31 @@ FAQ
   * If you write the code, chances are bigger that it will get into curl
     faster.
 
+  1.5 Who makes cURL?
+
+  cURL and libcurl are not made by any single individual. Sure, Daniel
+  Stenberg writes the major parts, but various people's submissions are
+  important and crucial. Anyone can post their changes and improvements and
+  have them inserted in the main sources (of course on the condition that
+  developers agree on that the fixes are good).
+
+  The list of contributors in the bottom of the man page is only a small part
+  of all the people that every day provide us with bug reports, suggestions,
+  ideas and source code.
+
+  curl is developed by a community, with Daniel at the wheel.
+
+  1.6 What do you get for making cURL?
+
+  Project cURL is entirely free and open, without any commercial interests or
+  money involved. No person gets paid in any way for developing curl. We all
+  do this volountarily on our spare time.
+
+  We get some help from companies. Contactor Data hosts the curl web site and
+  the main mailing list, Haxx owns the curl web site's domain and
+  sourceforge.net hosts several project tools we take advantage from like the
+  bug tracker, mailing lists and more.
+
 2. Install Related Problems
 
   2.1. configure doesn't find OpenSSL even when it is installed
@@ -499,7 +527,7 @@ FAQ
   available way to do multiple requests was to init/perform/cleanup for each
   transfer.
 
-  5.4 Does libcurl do Winsock initing on win32 systems?
+  5.4 Does libcurl do Winsock initialization on win32 systems?
 
   No.
 

docs/INSTALL

@@ -183,9 +183,9 @@ Win32
         For VC++ 6, there's an included Makefile.vc6 that should be possible
         to use out-of-the-box.
 
-        Microsoft note: add /Zm200 to the compiler options, as the hugehelp.c
-        won't compile otherwise due to "too long puts string" or something
-        like that!
+        Microsoft note: add /Zm200 to the compiler options to increase the 
+		compiler's memory allocation limit, as the hugehelp.c won't compile
+		due to "too long puts string".
 
 
    With SSL:
@@ -251,7 +251,7 @@ IBM OS/2
 
 PORTS
 =====
-   Just to show off, this is a probably incomplete list of known hardware and
+   This is a probably incomplete list of known hardware and
    operating systems that curl has been compiled for:
 
         - Ultrix

docs/MANUAL

@@ -15,10 +15,6 @@ SIMPLE USAGE
 
         curl ftp://ftp.funet.fi/README
 
-  Get a gopher document from funet's gopher server:
-
-        curl gopher://gopher.funet.fi
-
   Get a web page from a server using port 8000:
 
         curl http://www.weirdserver.com:8000/
@@ -27,6 +23,10 @@ SIMPLE USAGE
 
         curl ftp://cool.haxx.se/
 
+  Get a gopher document from funet's gopher server:
+
+        curl gopher://gopher.funet.fi
+
   Get the definition of curl from a dictionary:
 
         curl dict://dict.org/m:curl
@@ -186,7 +186,7 @@ DETAILED INFORMATION
   -D/--dump-header option when getting files from both FTP and HTTP, and it
   will then store the headers in the specified file.
 
-  Store the HTTP headers in a separate file:
+  Store the HTTP headers in a separate file (headers.txt in the example):
 
         curl --dump-header headers.txt curl.haxx.se
 
@@ -245,32 +245,32 @@ POST (HTTP)
 
   -F accepts parameters like -F "name=contents". If you want the contents to
   be read from a file, use <@filename> as contents. When specifying a file,
-  you can also specify which content type the file is, by appending
-  ';type=<mime type>' to the file name. You can also post contents of several
-  files in one field. So that the field name 'coolfiles' can be sent three
-  files with different content types in a manner similar to:
+  you can also specify the file content type by appending ';type=<mime type>'
+  to the file name. You can also post the contents of several files in one field.
+  For example, the field name 'coolfiles' is used to send three  files, with
+  different content types using the following syntax:
 
         curl -F "coolfiles=@fil1.gif;type=image/gif,fil2.txt,fil3.html" \
         http://www.post.com/postit.cgi
 
-  If content-type is not specified, curl will try to guess from the extension
-  (it only knows a few), or use the previously specified type (from an earlier
-  file if several files are specified in a list) or finally using the default
-  type 'text/plain'.
+  If the content-type is not specified, curl will try to guess from the file
+  extension  (it only knows a few), or use the previously specified type
+  (from an earlier file if several files are specified in a list) or else it
+  will  using the default type 'text/plain'.
 
   Emulate a fill-in form with -F. Let's say you fill in three fields in a
   form. One field is a file name which to post, one field is your name and one
   field is a file description. We want to post the file we have written named
   "cooltext.txt". To let curl do the posting of this data instead of your
-  favourite browser, you have to check out the HTML of the form page to get to
-  know the names of the input fields. In our example, the input field names are
+  favourite browser, you have to read the HTML source of the form page and find
+  the names of the input fields. In our example, the input field names are
   'file', 'yourname' and 'filedescription'.
 
         curl -F "file=@cooltext.txt" -F "yourname=Daniel" \
              -F "filedescription=Cool text file with cool text inside" \
              http://www.post.com/postit.cgi
 
-  So, to send two files in one post you can do it in two ways:
+  To send two files in one post you can do it in two ways:
 
   1. Send multiple files in a single "field" with a single field name:
  
@@ -280,11 +280,11 @@ POST (HTTP)
 
         curl -F "docpicture=@dog.gif" -F "catpicture=@cat.gif" 
 
-REFERER
+REFERRER
 
   A HTTP request has the option to include information about which address
-  that referred to actual page, and curl allows the user to specify that
-  referrer to get specified on the command line. It is especially useful to
+  that referred to actual page.  Curl allows you to specify the
+  referrer to be used on the command line. It is especially useful to
   fool or trick stupid servers or CGI scripts that rely on that information
   being available or contain certain data.
 
@@ -353,13 +353,17 @@ COOKIES
   Note that by specifying -b you enable the "cookie awareness" and with -L
   you can make curl follow a location: (which often is used in combination
   with cookies). So that if a site sends cookies and a location, you can
-  use a non-existing file to trig the cookie awareness like:
+  use a non-existing file to trigger the cookie awareness like:
 
-        curl -L -b empty-file www.example.com
+        curl -L -b empty.txt www.example.com
 
   The file to read cookies from must be formatted using plain HTTP headers OR
   as netscape's cookie file. Curl will determine what kind it is based on the
-  file contents.
+  file contents.  In the above command, curl will parse the header and store
+  the cookies received from www.example.com.  curl will send to the server the
+  stored cookies which match the request as it follows the location.  The
+  file "empty.txt" may be a non-existant file.
+  
 
 PROGRESS METER
 
@@ -392,12 +396,12 @@ PROGRESS METER
 
 SPEED LIMIT
 
-  Curl offers the user to set conditions regarding transfer speed that must
-  be met to let the transfer keep going. By using the switch -y and -Y you
-  can make curl abort transfers if the transfer speed doesn't exceed your
-  given lowest limit for a specified time.
+  Curl allows the user to set the transfer speed conditions that must be met
+  to let the transfer keep going. By using the switch -y and -Y you
+  can make curl abort transfers if the transfer speed is below the specified
+  lowest limit for a specified time.
 
-  To let curl abandon downloading this page if its slower than 3000 bytes per
+  To have curl abort the download if the speed is slower than 3000 bytes per
   second for 1 minute, run:
 
         curl -y 3000 -Y 60 www.far-away-site.com
@@ -610,7 +614,7 @@ RESUMING FILE TRANSFERS
  (*1) = This requires that the ftp server supports the non-standard command
         SIZE. If it doesn't, curl will say so.
 
- (*2) = This requires that the wb server supports at least HTTP/1.1. If it
+ (*2) = This requires that the web server supports at least HTTP/1.1. If it
         doesn't, curl will say so.
 
 TIME CONDITIONS

docs/curl.1

@@ -2,7 +2,7 @@
 .\" nroff -man curl.1
 .\" Written by Daniel Stenberg
 .\"
-.TH curl 1 "15 March 2001" "Curl 7.7" "Curl Manual"
+.TH curl 1 "24 March 2001" "Curl 7.7" "Curl Manual"
 .SH NAME
 curl \- get a URL with FTP, TELNET, LDAP, GOPHER, DICT, FILE, HTTP or
 HTTPS syntax.
@@ -128,7 +128,7 @@ content-type application/x-www-form-urlencoded. Compare to -F. If more than
 one -d/--data option is used on the same command line, the data pieces
 specified will be merged together with a separating &-letter. Thus, using '-d
 name=daniel -d skill=lousy' would generate a post chunk that looks like
-'name=daniel&skill=lousy'.
+\&'name=daniel&skill=lousy'.
 
 If you start the data with the letter @, the rest should be a file name to
 read the data from, or - if you want curl to read the data from stdin.  The
@@ -215,7 +215,7 @@ get attached in the post as a file upload, while the < makes a text field and
 just get the contents for that text field from a file.
 
 Example, to send your password file to the server, where
-'password' is the name of the form-field to which /etc/passwd will be the
+\&'password' is the name of the form-field to which /etc/passwd will be the
 input:
 
 .B curl
@@ -325,7 +325,7 @@ directory.
 A quick and very simple example of how to setup a
 .I .netrc
 to allow curl to ftp to the machine host.domain.com with user name
-'myself' and password 'secret' should look similar to:
+\&'myself' and password 'secret' should look similar to:
 
 .B "machine host.domain.com login myself password secret"
 

docs/curl_easy_setopt.3

@@ -2,13 +2,13 @@
 .\" nroff -man [file]
 .\" Written by daniel@haxx.se
 .\"
-.TH curl_easy_setopt 3 "13 March 2001" "libcurl 7.7" "libcurl Manual"
+.TH curl_easy_setopt 3 "30 March 2001" "libcurl 7.7" "libcurl Manual"
 .SH NAME
 curl_easy_setopt - Set curl easy-session options
 .SH SYNOPSIS
 .B #include <curl/curl.h>
 .sp
-.BI "CURLcode curl_easy_setopt(CURL *" handle ", CURLoption "option ", ...);
+.BI "CURLcode curl_easy_setopt(CURL *" handle ", CURLoption "option ", ...);"
 .ad
 .SH DESCRIPTION
 curl_easy_setopt() is called to tell libcurl how to behave in a number of
@@ -274,7 +274,11 @@ curl_slist' structs properly filled in. Use
 .I curl_slist_append(3)
 to create the list and
 .I curl_slist_free_all(3)
-to clean up an entire list.
+to clean up an entire list. If you add a header that is otherwise generated
+and used by libcurl internally, your added one will be used instead. If you
+add a header with no contents as in 'Accept:', the internally used header will
+just get disabled. Thus, using this option you can add new headers, replace
+internal headers and remove internal headers.
 .TP
 .B CURLOPT_HTTPPOST
 Tells libcurl you want a multipart/formdata HTTP POST to be made and you
@@ -313,7 +317,9 @@ struct curl_slist structs properly filled in as described for
 .I "CURLOPT_QUOTE"
 .TP
 .B CURLOPT_WRITEHEADER
-Pass a FILE * to be used to write the header part of the received data to.
+Pass a FILE * to be used to write the header part of the received data to. The
+headers are guaranteed to be written one-by-one to this file handle and only
+complete lines are written. Parsing headers should be easy enough using this.
 .TP
 .B CURLOPT_COOKIEFILE
 Pass a pointer to a zero terminated string as parameter. It should contain the
@@ -353,7 +359,7 @@ name. (Added in libcurl 7.3)
 .B CURLOPT_KRB4LEVEL
 Pass a char * as parameter. Set the krb4 security level, this also enables
 krb4 awareness.  This is a string, 'clear', 'safe', 'confidential' or
-'private'.  If the string is set but doesn't match one of these, 'private'
+\&'private'.  If the string is set but doesn't match one of these, 'private'
 will be used. Set the string to NULL to disable kerberos4. The kerberos
 support only works for FTP. (Added in libcurl 7.3)
 .TP

docs/curl_escape.3

@@ -13,7 +13,10 @@ curl_escape - URL encodes the given string
 .SH DESCRIPTION
 This function will convert the given input string to an URL encoded string and
 return that as a new allocated string. All input characters that are not a-z,
-A-Z or 0-9 will be converted to their "URL escaped" version.
+A-Z or 0-9 will be converted to their "URL escaped" version. If a sequence of
+%NN (where NN is a two-digit hexadecimal number) is found in the string to
+encode, that 3-letter combination will be copied to the output unmodifed,
+assuming that it is an already encoded piece of data.
 
 If the 'length' argument is set to 0, curl_escape() will use strlen() on the
 input 'url' string to find out the size.

docs/examples/Makefile.am

@@ -6,8 +6,7 @@ AUTOMAKE_OPTIONS = foreign no-dependencies
 
 EXTRA_DIST = 
 	README curlgtk.c sepheaders.c simple.c postit.c \
-	win32sockets.c persistant.c \
-	getpageinvar.php simpleget.php simplepost.php
+	win32sockets.c persistant.c ftpget.c Makefile.example
 
 all:
 	@echo "done"

docs/examples/Makefile.example

@@ -0,0 +1,41 @@
+#############################################################################
+#                                  _   _ ____  _     
+#  Project                     ___| | | |  _ \| |    
+#                             / __| | | | |_) | |    
+#                            | (__| |_| |  _ <| |___ 
+#                             \___|\___/|_| \_\_____|
+#
+# $Id$
+#
+
+# What to call the final executable
+TARGET = example
+
+# Which object files that the executable consists of
+OBJS= ftpget.o
+
+# What compiler to use
+CC = gcc
+
+# Compiler flags, -g for debug, -c to make an object file
+CFLAGS = -c -g
+
+# This should point to a directory that holds libcurl, if it isn't
+# in the system's standard lib dir
+# We also set a -L to include the directory where we have the openssl
+# libraries
+LDFLAGS = -L/home/dast/lib -L/usr/local/ssl/lib
+
+# We need -lcurl for the curl stuff
+# We need -lsocket and -lnsl when on Solaris
+# We need -lssl and -lcrypto when using libcurl with SSL support
+# We need -ldl for dlopen() if that is in libdl
+LIBS = -lcurl -lsocket -lnsl -lssl -lcrypto -dl
+
+# Link the target with all objects and libraries
+$(TARGET) : $(OBJS)
+	$(CC) $(LDFLAGS) $(LIBS) -o $(TARGET) $(OBJS)
+
+# Compile the source files into object files
+ftpget.o : ftpget.c
+	$(CC) $(CFLAGS) $<

docs/examples/README

@@ -7,4 +7,8 @@ advantage of libcurl.
 If you end up with other small but still useful example sources, please mail
 them for submission in future packages and on the web site.
 
+The Makefile.example is an example makefile that could be used to build these
+examples. Just edit the file according to your system and requirements first.
+
 Try the php/examples/ directory for PHP programming snippets!
+

docs/examples/ftpget.c

@@ -0,0 +1,44 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+/* to make this work under windows, use the win32-functions from the
+   win32socket.c file as well */
+
+int main(int argc, char **argv)
+{
+  CURL *curl;
+  CURLcode res;
+  FILE *ftpfile;
+  
+  /* local file name to store the file as */
+  ftpfile = fopen("curl.tar.gz", "wb"); /* b is binary for win */
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* Get curl 7.7 from sunet.se's FTP site: */
+    curl_easy_setopt(curl, CURLOPT_URL,
+                     "ftp://ftp.sunet.se/pub/www/utilities/curl/curl-7.7.tar.gz");
+    curl_easy_setopt(curl, CURLOPT_FILE, ftpfile);
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+
+  fclose(ftpfile); /* close the local file */
+
+  return 0;
+}

include/curl/curl.h

@@ -481,8 +481,8 @@ char *curl_escape(char *string, int length);
 char *curl_unescape(char *string, int length);
 
 /* This is the version number */
-#define LIBCURL_VERSION "7.7"
-#define LIBCURL_VERSION_NUM 0x070700
+#define LIBCURL_VERSION "7.7.1"
+#define LIBCURL_VERSION_NUM 0x070701
 
 /* linked-list structure for the CURLOPT_QUOTE option (and other) */
 struct curl_slist {

lib/Makefile.vc6

@@ -38,6 +38,7 @@ RELEASE_OBJS= \
 	formdatar.obj \
 	ftpr.obj \
 	httpr.obj \
+	http_chunksr.obj \
 	ldapr.obj \
 	dictr.obj \
 	telnetr.obj \
@@ -68,6 +69,7 @@ DEBUG_OBJS= \
 	formdatad.obj \
 	ftpd.obj \
 	httpd.obj \
+	http_chunksd.obj \
 	ldapd.obj \
 	dictd.obj \
 	telnetd.obj \
@@ -98,6 +100,7 @@ RELEASE_SSL_OBJS= \
 	formdatars.obj \
 	ftprs.obj \
 	httprs.obj \
+	http_chunksrs.obj \
 	ldaprs.obj \
 	dictrs.obj \
 	telnetrs.obj \
@@ -128,6 +131,7 @@ LINK_OBJS= \
 	formdata.obj \
 	ftp.obj \
 	http.obj \
+	http_chunks.obj \
 	ldap.obj \
 	dict.obj \
 	telnet.obj \
@@ -176,6 +180,8 @@ ftpr.obj: ftp.c
 	$(CCR) $(CFLAGS) ftp.c
 httpr.obj: http.c
 	$(CCR) $(CFLAGS) http.c
+http_chunksr.obj: http_chunks.c
+	$(CCR) $(CFLAGS) http_chunks.c
 ldapr.obj: ldap.c
 	$(CCR) $(CFLAGS) ldap.c
 dictr.obj: dict.c
@@ -234,6 +240,8 @@ ftpd.obj: ftp.c
 	$(CCD) $(CFLAGS) ftp.c
 httpd.obj: http.c
 	$(CCD) $(CFLAGS) http.c
+http_chunksd.obj: http_chunks.c
+	$(CCD) $(CFLAGS) http_chunks.c
 ldapd.obj: ldap.c
 	$(CCD) $(CFLAGS) ldap.c
 dictd.obj: dict.c
@@ -291,8 +299,8 @@ formdatars.obj: formdata.c
 	$(CCRS) $(CFLAGS) formdata.c
 ftprs.obj: ftp.c
 	$(CCRS) $(CFLAGS) ftp.c
-httprs.obj: http.c
-	$(CCRS) $(CFLAGS) http.c
+http_chunksrs.obj: http_chunks.c
+	$(CCRS) $(CFLAGS) http_chunks.c
 ldaprs.obj: ldap.c
 	$(CCRS) $(CFLAGS) ldap.c
 dictrs.obj: dict.c

lib/escape.c

@@ -25,6 +25,7 @@
  * allocated string or NULL if an error occurred.  */
 
 #include "setup.h"
+#include <ctype.h>
 #include <curl/curl.h>
 
 #include <stdio.h>
@@ -52,6 +53,19 @@ char *curl_escape(char *string, int length)
             !(in >= 'A' && in <= 'Z') &&
             !(in >= '0' && in <= '9')) {
       /* encode it */
+      if(('%' == in) &&
+         (length>=2) &&
+         isxdigit((int)string[1]) &&
+         isxdigit((int)string[2]) ) {
+        /*
+         * This is an already encoded letter, leave it!
+         */
+        memcpy(&ns[index], string, 3);
+        string+=2;
+      }
+      else {
+        /* encode this now */
+
         newlen += 2; /* the size grows with two, since this'll become a %XX */
         if(newlen > alloc) {
           alloc *= 2;
@@ -60,6 +74,7 @@ char *curl_escape(char *string, int length)
             return NULL;
         }
         sprintf(&ns[index], "%%%02X", in);
+      }
       index+=3;
     }
     else {

lib/ftp.c

@@ -78,6 +78,7 @@
 #endif
 
 #include "strequal.h"
+#include "ssluse.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
@@ -316,6 +317,14 @@ CURLcode Curl_ftp_connect(struct connectdata *conn)
       return result;
   }
 
+  if(conn->protocol & PROT_FTPS) {
+    /* FTPS is simply ftp with SSL for the control channel */
+    /* now, perform the SSL initialization for this socket */
+    if(Curl_SSLConnect(conn))
+      return CURLE_SSL_CONNECT_ERROR;
+  }
+
+
   /* The first thing we do is wait for the "220*" line: */
   nread = Curl_GetFTPResponse(conn->firstsocket, buf, conn, &ftpcode);
   if(nread < 0)
@@ -337,8 +346,6 @@ CURLcode Curl_ftp_connect(struct connectdata *conn)
        set a valid level */
     sec_request_prot(conn, data->krb4_level);
 
-    data->cmdchannel = fdopen(conn->firstsocket, "w");
-
     if(sec_login(conn) != 0)
       infof(data, "Logging in with password in cleartext!\n");
     else
@@ -1702,16 +1709,9 @@ size_t Curl_ftpsendf(int fd, struct connectdata *conn, char *fmt, ...)
 
   strcat(s, "\r\n"); /* append a trailing CRLF */
 
-#ifdef KRB4
-  if(conn->sec_complete && conn->data->cmdchannel) {
-    bytes_written = sec_fprintf(conn, conn->data->cmdchannel, s);
-    fflush(conn->data->cmdchannel);
-  }
-  else
-#endif /* KRB4 */
-    {
-      bytes_written = swrite(fd, s, strlen(s));
-    }
+  bytes_written=0;
+  Curl_write(conn, fd, s, strlen(s), &bytes_written);
+
   return(bytes_written);
 }
 
@@ -1720,12 +1720,14 @@ CURLcode Curl_ftp_disconnect(struct connectdata *conn)
 {
   struct FTP *ftp= conn->proto.ftp;
 
+  /* The FTP session may or may not have been allocated/setup at this point! */
+  if(ftp) {
     if(ftp->user)
       free(ftp->user);
     if(ftp->passwd)
       free(ftp->passwd);
     if(ftp->entrypath)
       free(ftp->entrypath);
-
+  }
   return CURLE_OK;
 }

lib/getdate.c

@@ -132,44 +132,44 @@
    then those parser generators need to be fixed instead of adding those
    names to this list. */
 
-#define yymaxdepth gd_maxdepth
-#define yyparse gd_parse
-#define yylex   gd_lex
-#define yyerror gd_error
-#define yylval  gd_lval
-#define yychar  gd_char
-#define yydebug gd_debug
-#define yypact  gd_pact
-#define yyr1    gd_r1
-#define yyr2    gd_r2
-#define yydef   gd_def
-#define yychk   gd_chk
-#define yypgo   gd_pgo
-#define yyact   gd_act
-#define yyexca  gd_exca
-#define yyerrflag gd_errflag
-#define yynerrs gd_nerrs
-#define yyps    gd_ps
-#define yypv    gd_pv
-#define yys     gd_s
-#define yy_yys  gd_yys
-#define yystate gd_state
-#define yytmp   gd_tmp
-#define yyv     gd_v
-#define yy_yyv  gd_yyv
-#define yyval   gd_val
-#define yylloc  gd_lloc
-#define yyreds  gd_reds          /* With YYDEBUG defined */
-#define yytoks  gd_toks          /* With YYDEBUG defined */
-#define yylhs   gd_yylhs
-#define yylen   gd_yylen
-#define yydefred gd_yydefred
-#define yydgoto gd_yydgoto
-#define yysindex gd_yysindex
-#define yyrindex gd_yyrindex
-#define yygindex gd_yygindex
-#define yytable  gd_yytable
-#define yycheck  gd_yycheck
+#define yymaxdepth Curl_gd_maxdepth
+#define yyparse Curl_gd_parse
+#define yylex   Curl_gd_lex
+#define yyerror Curl_gd_error
+#define yylval  Curl_gd_lval
+#define yychar  Curl_gd_char
+#define yydebug Curl_gd_debug
+#define yypact  Curl_gd_pact
+#define yyr1    Curl_gd_r1
+#define yyr2    Curl_gd_r2
+#define yydef   Curl_gd_def
+#define yychk   Curl_gd_chk
+#define yypgo   Curl_gd_pgo
+#define yyact   Curl_gd_act
+#define yyexca  Curl_gd_exca
+#define yyerrflag Curl_gd_errflag
+#define yynerrs Curl_gd_nerrs
+#define yyps    Curl_gd_ps
+#define yypv    Curl_gd_pv
+#define yys     Curl_gd_s
+#define yy_yys  Curl_gd_yys
+#define yystate Curl_gd_state
+#define yytmp   Curl_gd_tmp
+#define yyv     Curl_gd_v
+#define yy_yyv  Curl_gd_yyv
+#define yyval   Curl_gd_val
+#define yylloc  Curl_gd_lloc
+#define yyreds  Curl_gd_reds          /* With YYDEBUG defined */
+#define yytoks  Curl_gd_toks          /* With YYDEBUG defined */
+#define yylhs   Curl_gd_yylhs
+#define yylen   Curl_gd_yylen
+#define yydefred Curl_gd_yydefred
+#define yydgoto Curl_gd_yydgoto
+#define yysindex Curl_gd_yysindex
+#define yyrindex Curl_gd_yyrindex
+#define yygindex Curl_gd_yygindex
+#define yytable  Curl_gd_yytable
+#define yycheck  Curl_gd_yycheck
 
 static int yylex ();
 static int yyerror ();

lib/getdate.y

@@ -108,44 +108,44 @@
    then those parser generators need to be fixed instead of adding those
    names to this list. */
 
-#define yymaxdepth gd_maxdepth
-#define yyparse gd_parse
-#define yylex   gd_lex
-#define yyerror gd_error
-#define yylval  gd_lval
-#define yychar  gd_char
-#define yydebug gd_debug
-#define yypact  gd_pact
-#define yyr1    gd_r1
-#define yyr2    gd_r2
-#define yydef   gd_def
-#define yychk   gd_chk
-#define yypgo   gd_pgo
-#define yyact   gd_act
-#define yyexca  gd_exca
-#define yyerrflag gd_errflag
-#define yynerrs gd_nerrs
-#define yyps    gd_ps
-#define yypv    gd_pv
-#define yys     gd_s
-#define yy_yys  gd_yys
-#define yystate gd_state
-#define yytmp   gd_tmp
-#define yyv     gd_v
-#define yy_yyv  gd_yyv
-#define yyval   gd_val
-#define yylloc  gd_lloc
-#define yyreds  gd_reds          /* With YYDEBUG defined */
-#define yytoks  gd_toks          /* With YYDEBUG defined */
-#define yylhs   gd_yylhs
-#define yylen   gd_yylen
-#define yydefred gd_yydefred
-#define yydgoto gd_yydgoto
-#define yysindex gd_yysindex
-#define yyrindex gd_yyrindex
-#define yygindex gd_yygindex
-#define yytable  gd_yytable
-#define yycheck  gd_yycheck
+#define yymaxdepth Curl_gd_maxdepth
+#define yyparse Curl_gd_parse
+#define yylex   Curl_gd_lex
+#define yyerror Curl_gd_error
+#define yylval  Curl_gd_lval
+#define yychar  Curl_gd_char
+#define yydebug Curl_gd_debug
+#define yypact  Curl_gd_pact
+#define yyr1    Curl_gd_r1
+#define yyr2    Curl_gd_r2
+#define yydef   Curl_gd_def
+#define yychk   Curl_gd_chk
+#define yypgo   Curl_gd_pgo
+#define yyact   Curl_gd_act
+#define yyexca  Curl_gd_exca
+#define yyerrflag Curl_gd_errflag
+#define yynerrs Curl_gd_nerrs
+#define yyps    Curl_gd_ps
+#define yypv    Curl_gd_pv
+#define yys     Curl_gd_s
+#define yy_yys  Curl_gd_yys
+#define yystate Curl_gd_state
+#define yytmp   Curl_gd_tmp
+#define yyv     Curl_gd_v
+#define yy_yyv  Curl_gd_yyv
+#define yyval   Curl_gd_val
+#define yylloc  Curl_gd_lloc
+#define yyreds  Curl_gd_reds          /* With YYDEBUG defined */
+#define yytoks  Curl_gd_toks          /* With YYDEBUG defined */
+#define yylhs   Curl_gd_yylhs
+#define yylen   Curl_gd_yylen
+#define yydefred Curl_gd_yydefred
+#define yydgoto Curl_gd_yydgoto
+#define yysindex Curl_gd_yysindex
+#define yyrindex Curl_gd_yyrindex
+#define yygindex Curl_gd_yygindex
+#define yytable  Curl_gd_yytable
+#define yycheck  Curl_gd_yycheck
 
 static int yylex ();
 static int yyerror ();

lib/transfer.c

@@ -356,11 +356,10 @@ Transfer(struct connectdata *c_conn)
                   /*
                    * end-of-headers.
                    *
-                   * If we requested a "no body" and this isn't a "close"
-                   * connection, this is a good time to get out and return
-                   * home.
+                   * If we requested a "no body", this is a good time to get
+                   * out and return home.
                    */
-                  if(!conn->bits.close && data->bits.no_body)
+                  if(data->bits.no_body)
                     return CURLE_OK;
                   break;		/* exit header line loop */
                 }
@@ -423,6 +422,18 @@ Transfer(struct connectdata *c_conn)
                 conn->bits.close = FALSE; /* don't close when done */
                 infof(data, "HTTP/1.0 proxy connection set to keep alive!\n");
               }
+              else if((httpversion == 0) &&
+                      strnequal("Connection: keep-alive", p,
+                                strlen("Connection: keep-alive"))) {
+                /*
+                 * A HTTP/1.0 reply with the 'Connection: keep-alive' line
+                 * tells us the connection will be kept alive for our
+                 * pleasure.  Default action for 1.0 is to close.
+                 *
+                 * [RFC2068, section 19.7.1] */
+                conn->bits.close = FALSE; /* don't close when done */
+                infof(data, "HTTP/1.0 connection set to keep alive!\n");
+              }
               else if (strnequal("Connection: close", p,
                                  strlen("Connection: close"))) {
                 /*
@@ -736,6 +747,10 @@ CURLcode Curl_perform(CURL *curl)
   struct UrlData *data = (struct UrlData *)curl;
   struct connectdata *conn=NULL;
   bool port=TRUE; /* allow data->use_port to set port to use */
+  char *newurl = NULL; /* possibly a new URL to follow to! */
+
+  data->followlocation=0; /* reset the location-follow counter */
+  data->bits.this_is_a_follow = FALSE; /* reset this */
 
   Curl_pgrsStartNow(data);
 
@@ -746,11 +761,23 @@ CURLcode Curl_perform(CURL *curl)
       res = Curl_do(conn);
       if(res == CURLE_OK) {
         res = Transfer(conn); /* now fetch that URL please */
-        if(res == CURLE_OK)
+        if(res == CURLE_OK) {
+          /*
+           * We must duplicate the new URL here as the connection data
+           * may be free()ed in the Curl_done() function.
+           */
+          newurl = conn->newurl?strdup(conn->newurl):NULL;
+
           res = Curl_done(conn);
         }
+      }
 
-      if((res == CURLE_OK) && conn->newurl) {
+      /*
+       * Important: 'conn' cannot be used here, since it may have been closed
+       * in 'Curl_done' or other functions.
+       */
+
+      if((res == CURLE_OK) && newurl) {
         /* Location: redirect
  
            This is assumed to happen for HTTP(S) only!
@@ -763,9 +790,6 @@ CURLcode Curl_perform(CURL *curl)
 
 	if (data->maxredirs && (data->followlocation >= data->maxredirs)) {
 	  failf(data,"Maximum (%d) redirects followed", data->maxredirs);
-#ifdef USE_OLD_DISCONNECT
-          curl_disconnect(c_connect);
-#endif
           res=CURLE_TOO_MANY_REDIRECTS;
 	  break;
 	}
@@ -790,7 +814,7 @@ CURLcode Curl_perform(CURL *curl)
           data->bits.http_set_referer = TRUE; /* might have been false */
         }
 
-        if(2 != sscanf(conn->newurl, "%15[^:]://%c", prot, &letter)) {
+        if(2 != sscanf(newurl, "%15[^:]://%c", prot, &letter)) {
           /***
            *DANG* this is an RFC 2068 violation. The URL is supposed
            to be absolute and this doesn't seem to be that!
@@ -803,19 +827,21 @@ CURLcode Curl_perform(CURL *curl)
           char *pathsep;
           char *newest;
 
+          /* we must make our own copy of the URL to play with, as it may
+             point to read-only data */
+          char *url_clone=strdup(data->url);
+
+          if(!url_clone)
+            return CURLE_OUT_OF_MEMORY;
+
           /* protsep points to the start of the host name */
-          protsep=strstr(data->url, "//");
+          protsep=strstr(url_clone, "//");
           if(!protsep)
-            protsep=data->url;
-          else {
-            port=FALSE; /* we got a full URL and thus we should not obey the
-                           port number that might have been set by the user
-                           in data->use_port */
-
+            protsep=url_clone;
+          else
             protsep+=2; /* pass the slashes */
-          }
 
-          if('/' != conn->newurl[0]) {
+          if('/' != newurl[0]) {
             /* First we need to find out if there's a ?-letter in the URL,
                and cut it and the right-side of that off */
             pathsep = strrchr(protsep, '?');
@@ -836,16 +862,17 @@ CURLcode Curl_perform(CURL *curl)
               *pathsep=0;
           }
 
-          newest=(char *)malloc( strlen(data->url) +
+          newest=(char *)malloc( strlen(url_clone) +
                                  1 + /* possible slash */
-                                 strlen(conn->newurl) + 1/* zero byte */);
+                                 strlen(newurl) + 1/* zero byte */);
 
           if(!newest)
             return CURLE_OUT_OF_MEMORY;
-          sprintf(newest, "%s%s%s", data->url, ('/' == conn->newurl[0])?"":"/",
-                  conn->newurl);
-          free(conn->newurl);
-          conn->newurl = newest;
+          sprintf(newest, "%s%s%s", url_clone, ('/' == newurl[0])?"":"/",
+                  newurl);
+          free(newurl);
+          free(url_clone);
+          newurl = newest;
         }
         else {
           /* This is an absolute URL, don't use the custom port number */
@@ -856,8 +883,8 @@ CURLcode Curl_perform(CURL *curl)
           free(data->url);
       
         /* TBD: set the URL with curl_setopt() */
-        data->url = conn->newurl;
-        conn->newurl = NULL; /* don't show! */
+        data->url = newurl;
+
         data->bits.urlstringalloc = TRUE; /* the URL is allocated */
 
         infof(data, "Follows Location: to new URL: '%s'\n", data->url);
@@ -871,7 +898,6 @@ CURLcode Curl_perform(CURL *curl)
         switch(data->progress.httpcode) {
         case 300: /* Multiple Choices */
         case 301: /* Moved Permanently */
-        case 302: /* Found */
         case 306: /* Not used */
         case 307: /* Temporary Redirect */
         default:  /* for all unknown ones */
@@ -879,6 +905,24 @@ CURLcode Curl_perform(CURL *curl)
            * seem to be OK to POST to.
            */
           break;
+        case 302: /* Found */
+          /* (From 10.3.3)
+
+            Note: RFC 1945 and RFC 2068 specify that the client is not allowed
+            to change the method on the redirected request.  However, most
+            existing user agent implementations treat 302 as if it were a 303
+            response, performing a GET on the Location field-value regardless
+            of the original request method. The status codes 303 and 307 have
+            been added for servers that wish to make unambiguously clear which
+            kind of reaction is expected of the client.
+
+            (From 10.3.4)
+
+            Note: Many pre-HTTP/1.1 user agents do not understand the 303
+            status. When interoperability with such clients is a concern, the
+            302 status code may be used instead, since most user agents react
+            to a 302 response as described here for 303.             
+          */
         case 303: /* See Other */
           /* Disable both types of POSTs, since doing a second POST when
            * following isn't what anyone would want! */
@@ -902,24 +946,19 @@ CURLcode Curl_perform(CURL *curl)
            */
           break;
         }
-#ifdef USE_OLD_DISCONNECT
-        curl_disconnect(c_connect);
-#endif
         continue;
       }
-
-#ifdef USE_OLD_DISCONNECT
-      curl_disconnect(c_connect);
-#endif
     }
     break; /* it only reaches here when this shouldn't loop */
 
   } while(1); /* loop if Location: */
 
-  if(conn->newurl) {
-    free(conn->newurl);
-    conn->newurl = NULL;
-  }
+  if(newurl)
+    free(newurl);
+
+  /* make sure the alarm is switched off! */
+  if(data->timeout || data->connecttimeout)
+    myalarm(0);
 
   return res;
 }

lib/url.c

@@ -816,6 +816,9 @@ CURLcode Curl_disconnect(struct connectdata *conn)
     free(conn->hostent_buf);
 #endif
 
+  if(conn->newurl)
+    free(conn->newurl);
+
   if(conn->path) /* the URL path part */
     free(conn->path);
 
@@ -936,9 +939,11 @@ ConnectionExists(struct UrlData *data,
           data->connects[i]=NULL; /* nothing here */
           continue; /* try another one now */
         }
-      }
+
         *usethis = check;
         return TRUE; /* yes, we found one to use! */
+        
+      }
     }
     else { /* The requested needle connection is using a proxy,
               is the checked one using the same? */
@@ -1397,6 +1402,8 @@ static CURLcode Connect(struct UrlData *data,
 #ifdef USE_SSLEAY
       else if(strnequal(conn->gname, "HTTPS", 5))
         strcpy(conn->protostr, "https");
+      else if(strnequal(conn->gname, "FTPS", 4))
+        strcpy(conn->protostr, "ftps");
 #endif /* USE_SSLEAY */
       else if(strnequal(conn->gname, "TELNET", 6))
         strcpy(conn->protostr, "telnet");
@@ -1666,8 +1673,19 @@ static CURLcode Connect(struct UrlData *data,
     conn->curl_done = Curl_http_done;
     conn->curl_close = Curl_http_close;
   }
-  else if(strequal(conn->protostr, "FTP")) {
+  else if(strequal(conn->protostr, "FTP") ||
+          strequal(conn->protostr, "FTPS")) {
     char *type;
+
+    if(strequal(conn->protostr, "FTPS")) {
+#ifdef USE_SSLEAY
+      conn->protocol |= PROT_FTPS;
+#else
+      failf(data, "libcurl was built with SSL disabled, ftps: not supported!");
+      return CURLE_UNSUPPORTED_PROTOCOL;
+#endif /* !USE_SSLEAY */
+    }
+
     conn->port = (data->use_port && allow_port)?data->use_port:PORT_FTP;
     conn->remote_port = PORT_FTP;
     conn->protocol |= PROT_FTP;
@@ -1676,6 +1694,12 @@ static CURLcode Connect(struct UrlData *data,
        !data->bits.tunnel_thru_httpproxy) {
       /* Unless we have asked to tunnel ftp operations through the proxy, we
          switch and use HTTP operations only */
+      if(conn->protocol & PROT_FTPS) {
+        /* FTPS is a hacked protocol and does not work through your
+           ordinary http proxy! */
+        failf(data, "ftps does not work through http proxy!");
+        return CURLE_UNSUPPORTED_PROTOCOL;
+      }
       conn->curl_do = Curl_http;
       conn->curl_done = Curl_http_done;
       conn->curl_close = Curl_http_close;
@@ -2126,8 +2150,10 @@ CURLcode Curl_connect(struct UrlData *data,
     /* We're not allowed to return failure with memory left allocated
        in the connectdata struct, free those here */
     conn = (struct connectdata *)*in_connect;
-    if(conn)
+    if(conn) {
       Curl_disconnect(conn);      /* close the connection */
+      *in_connect = NULL;         /* return a NULL */
+    }
   }
   return code;
 }

lib/urldata.h

@@ -207,6 +207,7 @@ struct connectdata {
 #define PROT_DICT    (1<<6)
 #define PROT_LDAP    (1<<7)
 #define PROT_FILE    (1<<8)
+#define PROT_FTPS    (1<<9)
 
 #ifdef ENABLE_IPV6
   struct addrinfo *hp; /* host info pointer list */
@@ -293,7 +294,6 @@ struct connectdata {
 		   document headers */
 
 #ifdef KRB4
-
   enum protection_level command_prot;
   enum protection_level data_prot;
   enum protection_level request_data_prot;
@@ -553,10 +553,6 @@ struct UrlData {
   char proxypasswd[MAX_CURL_PASSWORD_LENGTH];
 
   char *krb4_level; /* what security level */
-#ifdef KRB4
-  FILE *cmdchannel;
-#endif
-
   struct timeval keeps_speed; /* this should be request-specific */
 
   /* 'connects' will be an allocated array with pointers. If the pointer is

perl/Curl_easy/Makefile.PL

@@ -8,7 +8,7 @@ WriteMakefile(
     'NAME'	=> 'Curl::easy',
     'VERSION_FROM' => 'easy.pm', # finds $VERSION
     'LIBS'	=> ['-lcurl '],   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
+    'DEFINE'	=> '-Wall',     # e.g., '-DHAVE_SOMETHING' 
     'INC'	=> '',     # e.g., '-I/usr/include/other' 
     'clean'	=> {FILES => "head.out body.out"}
 );

perl/Curl_easy/easy.xs

@@ -205,15 +205,15 @@ CODE:
     if (option < CURLOPTTYPE_OBJECTPOINT) {
 	/* This is an option specifying an integer value: */
 	long value = (long)SvIV(ST(2));
-	RETVAL = curl_setopt(curl, option, value);
+	RETVAL = curl_easy_setopt(curl, option, value);
     } else if (option == CURLOPT_FILE || option == CURLOPT_INFILE ||
 	    option == CURLOPT_WRITEHEADER) {
 	/* This is an option specifying a FILE * value: */
 	FILE * value = IoIFP(sv_2io(ST(2)));
-	RETVAL = curl_setopt(curl, option, value);
+	RETVAL = curl_easy_setopt(curl, option, value);
     } else if (option == CURLOPT_ERRORBUFFER) {
 	SV *sv;
-	RETVAL = curl_setopt(curl, option, errbuf);
+	RETVAL = curl_easy_setopt(curl, option, errbuf);
 	if (errbufvarname) free(errbufvarname);
 	errbufvarname = strdup(value);
 	sv = perl_get_sv(errbufvarname, TRUE | GV_ADDMULTI);
@@ -224,7 +224,7 @@ CODE:
 	RETVAL = -1;
     } else {
 	/* default, option specifying a char * value: */
-	RETVAL = curl_setopt(curl, option, value);
+	RETVAL = curl_easy_setopt(curl, option, value);
     }
 OUTPUT:
     RETVAL
@@ -252,19 +252,19 @@ CODE:
     switch (option & CURLINFO_TYPEMASK) {
 	case CURLINFO_STRING: {
 	    char * value = (char *)SvPV(ST(2), PL_na);
-	    RETVAL = curl_getinfo(curl, option, &value);
+	    RETVAL = curl_easy_getinfo(curl, option, &value);
 	    sv_setpv(ST(2), value);
 	    break;
 	}
 	case CURLINFO_LONG: {
 	    long value = (long)SvIV(ST(2));
-	    RETVAL = curl_getinfo(curl, option, &value);
+	    RETVAL = curl_easy_getinfo(curl, option, &value);
 	    sv_setiv(ST(2), value);
 	    break;
 	}
 	case CURLINFO_DOUBLE: {
 	    double value = (double)SvNV(ST(2));
-	    RETVAL = curl_getinfo(curl, option, &value);
+	    RETVAL = curl_easy_getinfo(curl, option, &value);
 	    sv_setnv(ST(2), value);
 	    break;
 	}

perl/README

@@ -11,7 +11,8 @@ elegantly used from within it. You can either invoke external curl command
 line or use the curl interface.
 
  Georg Horn's Perl interface to curl is available in the Curl_easy/
-subdirectory.
+subdirectory. Using the Curl::easy module is just straightforward and
+works much like using libcurl in a C programm, so please refer to the
+documentation of libcurl. Have a look at test.pl to get an idea of how
+to start.
 
- Unfortunately, we don't have any examples nor any documentation for it at
-this point.

src/version.h

@@ -1,3 +1,3 @@
 #define CURL_NAME "curl"
-#define CURL_VERSION "7.7"
+#define CURL_VERSION "7.7.1"
 #define CURL_ID CURL_NAME " " CURL_VERSION " (" OS ") "

tests/data/reply14.txt

@@ -2,4 +2,3 @@ HTTP/1.1 200 OK
 Server: thebest/1.0
 Connection: close
 
-no?