7.6-pre4

unfolded telwrite() instead of being a separate single function

CHANGES

@@ -5,6 +5,120 @@
                              \___|\___/|_| \_\_____|
 
                                History of Changes
+Daniel (25 January 2001)
+- I took hold of Rick Jones' question why we don't use recv() and send() for
+  reading/writing to the sockets and I've now modified the sread() and
+  swrite() macros to use them instead. If nothing else, they could be tested
+  in the next beta-round coming right up.
+
+- Jeff Morrow found a problem with libcurl's usage of SSL_read() and supplied
+  his research results in how to fix this. It turns out we have to invoke the
+  function several times in some cases. The same goes for the SSL_write().
+
+  I made some rather drastic changes all over libcurl to make all writes and
+  reads get done on one single place so that this repeated-attempts thing
+  would only have to be implemented at one point.
+
+- Rick Jones spotted that the 'total time' counter really didn't measure the
+  total time very accurate on subsecond levels.
+
+- Johan Nilsson pointed out the need to more clearly specify that the timeout
+  value you set for a download is for the *entire* download. There's currently
+  no option available that sets a timeout for the connection phase only.
+
+Daniel (24 January 2001)
+- Ingo Ralf Blum submitted a series of patches required to get curl to compile
+  properly with cygwin.
+
+- Robert Weaver posted a fix for the win32 section of the curl_getenv() code
+  that corrected a potential memory leak.
+
+- Added comments in a few files in a sudden attempt to make the sources more
+  easy to read and understand!
+
+Daniel (23 January 2001)
+- Added simple IPv6 detection in the configure script and made the version
+  string add 'ipv6' to the enable section in that case. ENABLE_IPV6 will be
+  set if curl is compiled with IPv6 support enabled.
+
+- Added a parser for IPv6-style specified IP-addresses in a URL. Thus, when
+  IPv6 gets enabled soon, we can use URLs like '[0::1]:80'...
+
+- Made the URL globbing in the client possible to fail silently if there's an
+  error in the globbing. It makes it almost intuitive, so when you don't
+  follow the syntax rules, globbing is simply switched off and the raw string
+  is used instead.
+
+  I still think we'll get problems with IPv6-style IP-addresses when we *want*
+  globbing on parts of the URL as the initial part of the URL will for sure
+  seriously confuse the globber.
+
+Daniel (22 January 2001)
+- Bj<42>rn Stenberg supplied a progress meter patch that makes it look better even
+  during slow starts. Previously it made some silly assumptions...
+
+- Added two FTP tests for -Q and -Q - stuff since it was being discussed on
+  the mailing list. Had to correct the ftpserver.pl too as it bugged slightly.
+
+Daniel (19 January 2001)
+- Made the Location: parsers deal with any-length URLs. Thus I removed the last
+  code that restricts the length of URLs that curl supports.
+
+- Added a --globoff test case (#28) and it quickly identified a memory problem
+  in src/main.c that I took care of.
+
+Version 7.6-pre3
+
+Daniel (17 January 2001)
+- Made the two former files lib/download.c and lib/highlevel.c become the new
+  lib/transfer.c which makes more sense. I also did the rename from Transfer()
+  to Curl_Transfer() in the other source files that use the transfer function
+  in the spirit of using Curl_ prefix for library-scoped global symbols.
+
+Daniel (11 January 2001)
+- Added -g/--globoff that switches OFF the URL globbing and thus enables {}[]
+  letters to be part of the URL. Do note that RFC2396 section 2.4.3 explicitly
+  mention these letters to be escaped. This was posted as a feature request by
+  Jorge Gutierrez and as a bug by Terry.
+
+- Short options to curl that requires parameters can now be specified without
+  having the option and its parameter space separated. -ofile works as good as
+  -o file. -m20 is equal to -m 20. Do note that this goes for single-letter
+  options only, verbose --long-style options still must be separated with
+  space from their parameters.
+
+Daniel (8 January 2001)
+- Francis Dagenais reported that the SCO compiler still fails when compiling
+  curl due to that getpass_r() prototype. I've now put it around #ifndef
+  HAVE_GETPASS_R in an attempt to please the SCO systems.
+
+- Made some minor corrections to get the client to cleanup properly and I made
+  the separator work again when getting multiple globbed URLs to stdout.
+
+- Worked with Loic Dachary to get the make dist and make distcheck work
+  correctly. The 'maketgz' script is now using the automake generated 'make
+  dist' when creating release archives. Loic successfully made 'make rpms'
+  automatically build RPMs!
+
+Loic Dachary (6 January 2001)
+- Automated generation of rpm packages, no need to be root.
+
+- make distcheck generates a proper distribution (EXTRA_DIST
+  in all Makefile.am modified to match FILES).
+
+Daniel (5 January 2001)
+- Huge client-side hack: now multiple URLs are supported. Any number of URLs
+  can be specified on the command line, and they'll all be downloaded. There
+  must be a corresponding -o or -O for each URL or the data will be written to
+  stdout. This needs more testing, time to release a 7.6-pre package.
+
+- The krb4 support was broken in the release. Fixed now.
+
+- Huge internal symbol rename operation. All non-static but still lib-internal
+  symbols should now be prefixed with 'Curl_' to prevent collisions with other
+  libs. All public symbols should be prefixed with 'curl_' and the rest should
+  be static and thus invisible to the outside world. I updated the INTERNALS
+  document to say this as well.
 
 Version 7.5.2
 

CVS-INFO

@@ -14,7 +14,9 @@ perl/         is a subdirectory with various perl scripts
 
 To build after having extracted everything from CVS, do this:
 
-% automake
-% autoconf
-% ./configure
-% make
+automake
+aclocal
+autoheader
+autoconf
+./configure
+make

FILES

@@ -1,86 +0,0 @@
-CHANGES
-FILES
-LEGAL
-MPL-1.1.txt
-MITX.txt
-README
-docs/BUGS
-docs/CONTRIBUTE
-docs/FAQ
-docs/FEATURES
-docs/INSTALL
-docs/INTERNALS
-docs/MANUAL
-docs/README.win32
-docs/LIBCURL
-docs/RESOURCES
-docs/TODO
-docs/curl.1
-docs/Makefile.in
-docs/Makefile.am
-docs/TheArtOfHttpScripting
-docs/*.3
-docs/examples/README
-docs/examples/*.c
-maketgz
-Makefile.in
-Makefile.am
-acconfig.h
-acinclude.m4
-aclocal.m4
-config.guess
-config.h.in
-config-win32.h
-config.sub
-configure
-configure.in
-install-sh
-missing
-mkinstalldirs
-reconf
-stamp-h.in
-ltconfig
-ltmain.sh
-src/config-win32.h
-src/hugehelp.c
-src/main.c
-src/setup.h
-src/urlglob.c
-src/urlglob.h
-src/version.h
-src/writeout.c
-src/writeout.h
-src/*.in
-src/*.am
-src/mkhelp.pl
-src/Makefile.vc6
-src/Makefile.b32
-src/*m32
-lib/getdate.y
-lib/*.[ch]
-lib/*in
-lib/*am
-lib/Makefile.vc6
-lib/*m32
-lib/Makefile.b32
-lib/Makefile.b32.resp
-lib/libcurl.def
-include/README
-include/Makefile.in
-include/Makefile.am
-include/curl/*.h
-include/curl/Makefile.in
-include/curl/Makefile.am
-packages/Linux/RPM/curl-ssl.spec
-packages/Linux/RPM/curl.spec
-packages/Linux/RPM/make_curl_rpm
-packages/Linux/RPM/README
-packages/Win32/README
-packages/README
-tests/Makefile.am
-tests/Makefile.in
-tests/runtests.pl
-tests/README
-tests/httpserver.pl
-tests/ftpserver.pl
-tests/data/*.txt

Makefile.am

@@ -4,9 +4,44 @@
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
-EXTRA_DIST = curl.spec curl-ssl.spec
+EXTRA_DIST = \
+	CHANGES LEGAL maketgz MITX.txt MPL-1.1.txt \
+	config-win32.h reconf packages/README Makefile.dist
 
-SUBDIRS = docs lib src include tests
+SUBDIRS = docs lib src include tests packages
+
+# create a root makefile in the distribution:
+dist-hook:
+	cp $(srcdir)/Makefile.dist $(distdir)/Makefile
+
+check: test
 
 test:
 	@(cd tests; make quiet-test)
+
+#
+# Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
+# must contain the following line:
+# %_topdir /home/loic/local/rpm
+# and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
+#
+# cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
+#
+# If additional configure flags are needed to build the package, add the
+# following in ~/.rpmmacros
+# %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
+# and run make rpm in the following way:
+# AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
+#
+
+rpms:
+	$(MAKE) RPMDIST=curl rpm
+	$(MAKE) RPMDIST=curl-ssl rpm
+
+rpm:
+	RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
+	cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
+	cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
+	rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
+	mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
+	mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .

acconfig.h

@@ -36,3 +36,6 @@
 
 /* Define if you have the Kerberos4 libraries (including -ldes) */
 #undef KRB4
+
+/* Define if you want to enable IPv6 support */
+#undef ENABLE_IPV6

aclocal.m4

@@ -1,616 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-#serial 12
-
-dnl By default, many hosts won't let programs access large files;
-dnl one must use special compiler options to get large-file access to work.
-dnl For more details about this brain damage please see:
-dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
-
-dnl Written by Paul Eggert <eggert@twinsun.com>.
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_TEST_INCLUDES
-AC_DEFUN(AC_SYS_LARGEFILE_TEST_INCLUDES,
-  [[#include <sys/types.h>
-    int a[(off_t) 9223372036854775807 == 9223372036854775807 ? 1 : -1];
-  ]])
-
-dnl Internal subroutine of AC_SYS_LARGEFILE.
-dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, VALUE, CACHE-VAR, COMMENT, INCLUDES, FUNCTION-BODY)
-AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
-  [AC_CACHE_CHECK([for $1 value needed for large files], $3,
-     [$3=no
-      AC_TRY_COMPILE(AC_SYS_LARGEFILE_TEST_INCLUDES
-$5
-        ,
-	[$6], 
-	,
-	[AC_TRY_COMPILE([#define $1 $2]
-AC_SYS_LARGEFILE_TEST_INCLUDES
-$5
-	   ,
-	   [$6],
-	   [$3=$2])])])
-   if test "[$]$3" != no; then
-     AC_DEFINE_UNQUOTED([$1], [$]$3, [$4])
-   fi])
-
-AC_DEFUN(AC_SYS_LARGEFILE,
-  [AC_ARG_ENABLE(largefile,
-     [  --disable-largefile     omit support for large files])
-   if test "$enable_largefile" != no; then
-
-     AC_CACHE_CHECK([for special C compiler options needed for large files],
-       ac_cv_sys_largefile_CC,
-       [ac_cv_sys_largefile_CC=no
-        if test "$GCC" != yes; then
-	  # IRIX 6.2 and later do not support large files by default,
-	  # so use the C compiler's -n32 option if that helps.
-	  AC_TRY_COMPILE(AC_SYS_LARGEFILE_TEST_INCLUDES, , ,
-	    [ac_save_CC="$CC"
-	     CC="$CC -n32"
-	     AC_TRY_COMPILE(AC_SYS_LARGEFILE_TEST_INCLUDES, ,
-	       ac_cv_sys_largefile_CC=' -n32')
-	     CC="$ac_save_CC"])
-        fi])
-     if test "$ac_cv_sys_largefile_CC" != no; then
-       CC="$CC$ac_cv_sys_largefile_CC"
-     fi
-
-     AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS, 64,
-       ac_cv_sys_file_offset_bits,
-       [Number of bits in a file offset, on hosts where this is settable.])
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE, 1,
-       ac_cv_sys_largefile_source,
-       [Define to make ftello visible on some hosts (e.g. HP-UX 10.20).],
-       [#include <stdio.h>], [return !ftello;])
-     AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES, 1,
-       ac_cv_sys_large_files,
-       [Define for large files, on AIX-style hosts.])
-dnl	lftp does not need ftello, and _XOPEN_SOURCE=500 makes resolv.h fail.
-dnl     AC_SYS_LARGEFILE_MACRO_VALUE(_XOPEN_SOURCE, 500,
-dnl       ac_cv_sys_xopen_source,
-dnl       [Define to make ftello visible on some hosts (e.g. glibc 2.1.3).],
-dnl       [#include <stdio.h>], [return !ftello;])
-   fi
-  ])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated.  We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
-  case " <<$>>CONFIG_HEADERS " in
-  *" <<$>>am_file "*<<)>>
-    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-    ;;
-  esac
-  am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
-
-# Do all the work for Automake.  This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftestfile`
-   fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "[$]2" = conftestfile
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
-   $1=$2
-   AC_MSG_RESULT(found)
-else
-   $1="$3/missing $2"
-   AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
-    # Accept absolute paths.
-changequote(,)dnl
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  ac_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
-	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
-	break
-      else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$lt_target" in
-*-*-beos* | *-*-cygwin*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case "$enable_ltdl_convenience" in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-

config.h.in

@@ -1,312 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.  */
-#ifndef _ALL_SOURCE
-#undef _ALL_SOURCE
-#endif
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#undef TIME_WITH_SYS_TIME
-
-/* Define cpu-machine-OS */
-#undef OS
-
-/* Define if you have the gethostbyaddr_r() function with 5 arguments */
-#undef HAVE_GETHOSTBYADDR_R_5
-
-/* Define if you have the gethostbyaddr_r() function with 7 arguments */
-#undef HAVE_GETHOSTBYADDR_R_7
-
-/* Define if you have the gethostbyaddr_r() function with 8 arguments */
-#undef HAVE_GETHOSTBYADDR_R_8
-
-/* Define if you have the gethostbyname_r() function with 3 arguments */
-#undef HAVE_GETHOSTBYNAME_R_3
-
-/* Define if you have the gethostbyname_r() function with 5 arguments */
-#undef HAVE_GETHOSTBYNAME_R_5
-
-/* Define if you have the gethostbyname_r() function with 6 arguments */
-#undef HAVE_GETHOSTBYNAME_R_6
-
-/* Define if you have the inet_ntoa_r function declared. */
-#undef HAVE_INET_NTOA_R_DECL
-
-/* Define if you need the _REENTRANT define for some functions */
-#undef NEED_REENTRANT
-
-/* Define if you have the Kerberos4 libraries (including -ldes) */
-#undef KRB4
-
-/* The number of bytes in a long double.  */
-#undef SIZEOF_LONG_DOUBLE
-
-/* The number of bytes in a long long.  */
-#undef SIZEOF_LONG_LONG
-
-/* Define if you have the RAND_screen function.  */
-#undef HAVE_RAND_SCREEN
-
-/* Define if you have the RAND_status function.  */
-#undef HAVE_RAND_STATUS
-
-/* Define if you have the closesocket function.  */
-#undef HAVE_CLOSESOCKET
-
-/* Define if you have the gethostbyaddr function.  */
-#undef HAVE_GETHOSTBYADDR
-
-/* Define if you have the gethostbyaddr_r function.  */
-#undef HAVE_GETHOSTBYADDR_R
-
-/* Define if you have the gethostbyname_r function.  */
-#undef HAVE_GETHOSTBYNAME_R
-
-/* Define if you have the gethostname function.  */
-#undef HAVE_GETHOSTNAME
-
-/* Define if you have the getpass_r function.  */
-#undef HAVE_GETPASS_R
-
-/* Define if you have the getservbyname function.  */
-#undef HAVE_GETSERVBYNAME
-
-/* Define if you have the gettimeofday function.  */
-#undef HAVE_GETTIMEOFDAY
-
-/* Define if you have the inet_addr function.  */
-#undef HAVE_INET_ADDR
-
-/* Define if you have the inet_ntoa function.  */
-#undef HAVE_INET_NTOA
-
-/* Define if you have the inet_ntoa_r function.  */
-#undef HAVE_INET_NTOA_R
-
-/* Define if you have the krb_get_our_ip_for_realm function.  */
-#undef HAVE_KRB_GET_OUR_IP_FOR_REALM
-
-/* Define if you have the localtime_r function.  */
-#undef HAVE_LOCALTIME_R
-
-/* Define if you have the perror function.  */
-#undef HAVE_PERROR
-
-/* Define if you have the select function.  */
-#undef HAVE_SELECT
-
-/* Define if you have the setvbuf function.  */
-#undef HAVE_SETVBUF
-
-/* Define if you have the sigaction function.  */
-#undef HAVE_SIGACTION
-
-/* Define if you have the signal function.  */
-#undef HAVE_SIGNAL
-
-/* Define if you have the socket function.  */
-#undef HAVE_SOCKET
-
-/* Define if you have the strcasecmp function.  */
-#undef HAVE_STRCASECMP
-
-/* Define if you have the strcmpi function.  */
-#undef HAVE_STRCMPI
-
-/* Define if you have the strdup function.  */
-#undef HAVE_STRDUP
-
-/* Define if you have the strftime function.  */
-#undef HAVE_STRFTIME
-
-/* Define if you have the stricmp function.  */
-#undef HAVE_STRICMP
-
-/* Define if you have the strlcpy function.  */
-#undef HAVE_STRLCPY
-
-/* Define if you have the strstr function.  */
-#undef HAVE_STRSTR
-
-/* Define if you have the tcgetattr function.  */
-#undef HAVE_TCGETATTR
-
-/* Define if you have the tcsetattr function.  */
-#undef HAVE_TCSETATTR
-
-/* Define if you have the uname function.  */
-#undef HAVE_UNAME
-
-/* Define if you have the <alloca.h> header file.  */
-#undef HAVE_ALLOCA_H
-
-/* Define if you have the <arpa/inet.h> header file.  */
-#undef HAVE_ARPA_INET_H
-
-/* Define if you have the <crypto.h> header file.  */
-#undef HAVE_CRYPTO_H
-
-/* Define if you have the <des.h> header file.  */
-#undef HAVE_DES_H
-
-/* Define if you have the <dlfcn.h> header file.  */
-#undef HAVE_DLFCN_H
-
-/* Define if you have the <err.h> header file.  */
-#undef HAVE_ERR_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <getopt.h> header file.  */
-#undef HAVE_GETOPT_H
-
-/* Define if you have the <io.h> header file.  */
-#undef HAVE_IO_H
-
-/* Define if you have the <krb.h> header file.  */
-#undef HAVE_KRB_H
-
-/* Define if you have the <malloc.h> header file.  */
-#undef HAVE_MALLOC_H
-
-/* Define if you have the <net/if.h> header file.  */
-#undef HAVE_NET_IF_H
-
-/* Define if you have the <netdb.h> header file.  */
-#undef HAVE_NETDB_H
-
-/* Define if you have the <netinet/if_ether.h> header file.  */
-#undef HAVE_NETINET_IF_ETHER_H
-
-/* Define if you have the <netinet/in.h> header file.  */
-#undef HAVE_NETINET_IN_H
-
-/* Define if you have the <openssl/crypto.h> header file.  */
-#undef HAVE_OPENSSL_CRYPTO_H
-
-/* Define if you have the <openssl/err.h> header file.  */
-#undef HAVE_OPENSSL_ERR_H
-
-/* Define if you have the <openssl/pem.h> header file.  */
-#undef HAVE_OPENSSL_PEM_H
-
-/* Define if you have the <openssl/rsa.h> header file.  */
-#undef HAVE_OPENSSL_RSA_H
-
-/* Define if you have the <openssl/ssl.h> header file.  */
-#undef HAVE_OPENSSL_SSL_H
-
-/* Define if you have the <openssl/x509.h> header file.  */
-#undef HAVE_OPENSSL_X509_H
-
-/* Define if you have the <pem.h> header file.  */
-#undef HAVE_PEM_H
-
-/* Define if you have the <rsa.h> header file.  */
-#undef HAVE_RSA_H
-
-/* Define if you have the <sgtty.h> header file.  */
-#undef HAVE_SGTTY_H
-
-/* Define if you have the <ssl.h> header file.  */
-#undef HAVE_SSL_H
-
-/* Define if you have the <stdlib.h> header file.  */
-#undef HAVE_STDLIB_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/select.h> header file.  */
-#undef HAVE_SYS_SELECT_H
-
-/* Define if you have the <sys/socket.h> header file.  */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define if you have the <sys/sockio.h> header file.  */
-#undef HAVE_SYS_SOCKIO_H
-
-/* Define if you have the <sys/stat.h> header file.  */
-#undef HAVE_SYS_STAT_H
-
-/* Define if you have the <sys/time.h> header file.  */
-#undef HAVE_SYS_TIME_H
-
-/* Define if you have the <sys/types.h> header file.  */
-#undef HAVE_SYS_TYPES_H
-
-/* Define if you have the <termio.h> header file.  */
-#undef HAVE_TERMIO_H
-
-/* Define if you have the <termios.h> header file.  */
-#undef HAVE_TERMIOS_H
-
-/* Define if you have the <time.h> header file.  */
-#undef HAVE_TIME_H
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the <winsock.h> header file.  */
-#undef HAVE_WINSOCK_H
-
-/* Define if you have the <x509.h> header file.  */
-#undef HAVE_X509_H
-
-/* Define if you have the crypto library (-lcrypto).  */
-#undef HAVE_LIBCRYPTO
-
-/* Define if you have the dl library (-ldl).  */
-#undef HAVE_LIBDL
-
-/* Define if you have the nsl library (-lnsl).  */
-#undef HAVE_LIBNSL
-
-/* Define if you have the resolv library (-lresolv).  */
-#undef HAVE_LIBRESOLV
-
-/* Define if you have the resolve library (-lresolve).  */
-#undef HAVE_LIBRESOLVE
-
-/* Define if you have the socket library (-lsocket).  */
-#undef HAVE_LIBSOCKET
-
-/* Define if you have the ssl library (-lssl).  */
-#undef HAVE_LIBSSL
-
-/* Define if you have the ucb library (-lucb).  */
-#undef HAVE_LIBUCB
-
-/* Name of package */
-#undef PACKAGE
-
-/* Version number of package */
-#undef VERSION
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define to make ftello visible on some hosts (e.g. HP-UX 10.20). */
-#undef _LARGEFILE_SOURCE
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Set to explicitly specify we don't want to use thread-safe functions */
-#undef DISABLED_THREADSAFE
-

configure.in

@@ -237,6 +237,44 @@ exit (rc != 0 ? 1 : 0); }],[
 
 ])
 
+dnl **********************************************************************
+dnl Checks for IPv6
+dnl **********************************************************************
+
+AC_MSG_CHECKING([whether to enable ipv6])
+AC_ARG_ENABLE(ipv6,
+[  --enable-ipv6		Enable ipv6 (with ipv4) support
+  --disable-ipv6		Disable ipv6 support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       ipv6=no
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       AC_DEFINE(ENABLE_IPV6)
+       ipv6=yes
+       ;;
+  esac ],
+
+  AC_TRY_RUN([ /* is AF_INET6 available? */
+#include <sys/types.h>
+#include <sys/socket.h>
+main()
+{
+ if (socket(AF_INET6, SOCK_STREAM, 0) < 0)
+   exit(1);
+ else
+   exit(0);
+}
+],
+  AC_MSG_RESULT(yes)
+  AC_DEFINE(ENABLE_IPV6)
+  ipv6=yes,
+  AC_MSG_RESULT(no)
+  ipv6=no,
+  AC_MSG_RESULT(no)
+  ipv6=no
+))
 
 dnl **********************************************************************
 dnl Checks for libraries.
@@ -590,6 +628,9 @@ AC_CHECK_FUNCS( socket \
 dnl removed 'getpass' check on October 26, 2000
 
 if test "$ac_cv_func_select" != "yes"; then
+  AC_MSG_ERROR(Can't work without an existing select() function)
+fi
+if test "$ac_cv_func_socket" != "yes"; then
   AC_MSG_ERROR(Can't work without an existing socket() function)
 fi
 
@@ -609,12 +650,17 @@ dnl AC_SUBST(RANLIB)
 
 AC_OUTPUT( Makefile \
 	   docs/Makefile \
+           docs/examples/Makefile \
 	   include/Makefile \
 	   include/curl/Makefile \
 	   src/Makefile \
            lib/Makefile \
-           tests/Makefile)
-dnl	   perl/checklinks.pl \
-dnl	   perl/getlinks.pl \
-dnl        perl/formfind.pl \
-dnl	   perl/recursiveftpget.pl  )
+           tests/Makefile \
+           tests/data/Makefile \
+	   packages/Makefile \
+	   packages/Win32/Makefile \
+	   packages/Linux/Makefile \
+	   packages/Linux/RPM/Makefile \
+	   packages/Linux/RPM/curl.spec \
+	   packages/Linux/RPM/curl-ssl.spec )
+

docs/CONTRIBUTE

@@ -18,7 +18,7 @@ The License Issue
  If you add a larger piece of code, you can opt to make that file or set of
  files to use a different license as long as they don't enfore any changes to
  the rest of the package and they make sense. Such "separate parts" can not be
- GPL (as we don't want the FPL virus to attack users of libcurl) but they must
+ GPL (as we don't want the GPL virus to attack users of libcurl) but they must
  use "GPL compatible" licenses.
 
 Naming

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: January 4, 2001 (http://curl.haxx.se/docs/faq.shtml)
+Updated: January 22, 2001 (http://curl.haxx.se/docs/faq.shtml)
                                   _   _ ____  _     
                               ___| | | |  _ \| |    
                              / __| | | | |_) | |    
@@ -33,7 +33,7 @@ FAQ
 
  4. Running Problems
   4.1 Problems connecting to SSL servers.
-  4.2 Why do I get problems when I use & in the URL?
+  4.2 Why do I get problems when I use & or % in the URL?
   4.3 How can I use {, }, [ or ] to specify multiple URLs?
   4.4 Why do I get downloaded data even though the web page doesn't exist?
   4.5 Why do I get return code XXX from a HTTP server?
@@ -48,10 +48,11 @@ FAQ
   4.9 Curl can't authenticate to the server that requires NTLM?
 
  5. libcurl Issues
-  5.1 Is libcurl thread safe?
+  5.1 Is libcurl thread-safe?
   5.2 How can I receive all data into a large memory chunk?
   5.3 How do I fetch multiple files with libcurl?
   5.4 Does libcurl do Winsock initing on win32 systems?
+  5.5 Does CURLOPT_FILE work on win32 ?
 
  6. License Issues
   6.1 I have a GPL program, can I use the libcurl library?
@@ -73,19 +74,16 @@ FAQ
   fact it can also be pronounced 'see URL' also helped.
 
   Curl supports a range of common internet protocols, currently including
-  HTTP, HTTPS, FTP, GOPHER, LDAP, DICT and FILE.
+  HTTP, HTTPS, FTP, GOPHER, LDAP, DICT, TELNET and FILE.
 
-  Please spell it cURL or just curl.
+  We spell it cURL or just curl.
 
   1.2 What is libcurl?
 
-  libcurl is the engine inside curl that does all the work. curl is more or
-  less the command line interface that converts the given options into libcurl
-  function invokes. libcurl is a reliable, higly portable multiprotocol file
-  transfer library.
+  libcurl is a reliable, higly portable multiprotocol file transfer library.
 
   Any application is free to use libcurl, even commercial or closed-source
-  ones. Just make sure changes to the lib itself are made public.
+  ones.
 
   1.3 What is cURL not?
   
@@ -298,7 +296,7 @@ FAQ
   I have also seen examples where the remote server didn't like the SSLv2
   request and instead you had to force curl to use SSLv3 with -3/--sslv3.
 
-  4.2. Why do I get problems when I use & in the URL?
+  4.2. Why do I get problems when I use & or % in the URL?
 
   In general unix shells, the & letter is treated special and when used it
   runs the specified command in the background. To safely send the & as a part
@@ -309,6 +307,9 @@ FAQ
 
      curl 'http://www.altavista.com/cgi-bin/query?text=yes&q=curl'
 
+  In win32, the standard DOS shell treats the %-letter specially and you may
+  need to quote the string properly when % is used in it.
+
   4.3. How can I use {, }, [ or ] to specify multiple URLs?
 
   Because those letters have a special meaning to the shell, and to be used in
@@ -318,6 +319,12 @@ FAQ
 
     curl '{curl,www}.haxx.se'
 
+  To be able to use those letters as actual parts of the URL (without using
+  them for the curl URL "globbing" system), use the -g/--globoff option
+  (included in curl 7.6 and later):
+
+    curl -g 'www.site.com/weirdname[].html'
+
   4.4. Why do I get downloaded data even though the web page doesn't exist?
 
   Curl asks remote servers for the page you specify. If the page doesn't exist
@@ -392,8 +399,7 @@ FAQ
   you have.
 
   If there is a bug, post a bug report in the Curl Bug Track System over at
-  http://sourceforge.net/bugs/?group_id=976 or mail a detailed bug description
-  to curl-bug@haxx.se.
+  http://sourceforge.net/bugs/?group_id=976
 
   Always include as many details you can think of, including curl version,
   operating system name and version and complete instructions how to repeat
@@ -406,11 +412,13 @@ FAQ
 
 5. libcurl Issues
 
-  5.1. Is libcurl thread safe?
+  5.1. Is libcurl thread-safe?
 
-  We have attempted to write the entire code adjusted for multi-threaded
-  programs. If your system has such, curl will attempt to use threadsafe
-  functions instead of non-safe ones.
+  Yes.
+
+  We have written the libcurl code specificly adjusted for multi-threaded
+  programs. libcurl will use thread-safe functions instead of non-safe ones if
+  your system has such.
 
   I am very interested in once and for all getting some kind of report or
   README file from those who have used libcurl in a threaded environment,
@@ -465,6 +473,15 @@ FAQ
   use several different libraries and parts, and there's no reason for every
   single library to do this.
 
+  5.5 Does CURLOPT_FILE work on win32 ?
+
+  Yes, but you cannot open a FILE * and pass the pointer to a DLL and have
+  that DLL use the FILE *. You must use CURLOPT_WRITEFUNCTION as well to set a
+  function that writes the file, even if that simply writes the data to the
+  specified FILE*.
+
+  (provided by Joel DeYoung)
+
 6. License Issues
 
   NOTE: This section is now updated to concern curl 7.5.2 or later!

docs/INSTALL

@@ -86,13 +86,28 @@ UNIX
 
      If you happen to have autoconf installed, but a version older than
      2.12 you will get into trouble. Then you can still build curl by
-     issuing these commands: (from Ralph Beckmann <rabe@uni-paderborn.de>)
+     issuing these commands: (from Ralph Beckmann)
 
        ./configure [...]
        cd lib; make; cd ..
        cd src; make; cd ..
        cp src/curl elsewhere/bin/
 
+     As suggested by David West, you can make a faked version of autoconf and
+     autoheader:
+
+       ----start of autoconf----
+       #!/bin/bash
+       #fake autoconf for building curl
+       if [ "$1" = "--version" ] then
+         echo "Autoconf version 2.13"
+       fi
+       ----end of autoconf----
+
+     Then make autoheader a symbolic link to the same script and make sure
+     they're executable and set to appear in the path *BEFORE* the actual (but
+     obsolete) autoconf and autoheader scripts.
+
    OPTIONS
 
      Remember, to force configure to use the standard cc compiler if both
@@ -154,6 +169,8 @@ Win32
         set, then run 'nmake -f Makefile.vc6' in the lib/ dir and then
         'nmake -f Makefile.vc6' in the src/ dir.
 
+        The vcvars32.bat file is part of the Microsoft development environment.
+
       IDE-style
       -------------------------
         If you use VC++, Borland or similar compilers. Include all lib source
@@ -199,6 +216,8 @@ Win32
         set, then run 'nmake -f Makefile.vc6 release-ssl' in the lib/ dir and
         then 'nmake -f Makefile.vc6' in the src/ dir.
 
+        The vcvars32.bat file is part of the Microsoft development environment.
+
       Microsoft / Borland style
       -------------------------
         If you have OpenSSL, and want curl to take advantage of it, edit your
@@ -256,18 +275,20 @@ PORTS
         - PowerPC Mac OS X
         - Sparc Linux
         - Sparc Solaris 2.4, 2.5, 2.5.1, 2.6, 7, 8
-        - Sparc SunOS 4.1.*
+        - Sparc SunOS 4.1.X
         - i386 BeOS
         - i386 FreeBSD
         - i386 Linux 1.3, 2.0, 2.2, 2.3, 2.4
         - i386 NetBSD
         - i386 OS/2
         - i386 OpenBSD
+        - i386 SCO unix
         - i386 Solaris 2.7
-        - i386 Windows 95, 98, NT, 2000
+        - i386 Windows 95, 98, ME, NT, 2000
         - ia64 Linux 2.3.99
         - m68k AmigaOS 3
         - m68k OpenBSD
+        - StrongARM NetBSD 1.4.1
 
 OpenSSL
 =======

docs/INTERNALS

@@ -12,9 +12,15 @@ INTERNALS
 
  Thus, the largest amount of code and complexity is in the library part.
 
+SYMBOLS
+=======
+ All symbols used internally must use a 'Curl_' prefix if they're used in more
+ than a single file. Single-file symbols must be made static. Public
+ (exported) symbols must use a 'curl_' prefix. (There are exceptions, but they
+ are destined to be changed to follow this pattern in the future.)
+
 CVS
 ===
-
  All changes to the sources are committed to the CVS repository as soon as
  they're somewhat verified to work. Changes shall be commited as independently
  as possible so that individual changes can be easier spotted and tracked
@@ -27,25 +33,28 @@ Windows vs Unix
 ===============
 
  There are a few differences in how to program curl the unix way compared to
- the Windows way. The four most notable details are:
+ the Windows way. The four perhaps most notable details are:
 
  1. Different function names for close(), read(), write()
+
+   In curl, this is solved with defines and macros, so that the source looks
+   the same at all places except for the header file that defines them.
+
  2. Windows requires a couple of init calls for the socket stuff
+
+   Those must be made by the application that uses libcurl, in curl that means
+   src/main.c has some code #ifdef'ed to do just that.
+
  3. The file descriptors for network communication and file operations are
     not easily interchangable as in unix
+
+   We avoid this by not trying any funny tricks on file descriptors.
+
  4. When writing data to stdout, Windows makes end-of-lines the DOS way, thus
     destroying binary data, although you do want that conversion if it is
     text coming through... (sigh)
 
- In curl, (1) is made with defines and macros, so that the source looks the
- same at all places except for the header file that defines them.
-
- (2) must be made by the application that uses libcurl, in curl that means
- src/main.c has some code #ifdef'ed to do just that.
-
- (3) is simply avoided by not trying any funny tricks on file descriptors.
-
- (4) we set stdout to binary under windows
+   We set stdout to binary under windows
 
  Inside the source code, I do make an effort to avoid '#ifdef WIN32'. All
  conditionals that deal with features *should* instead be in the format
@@ -54,6 +63,9 @@ Windows vs Unix
  supposed to look exactly as a config.h file would have looked like on a
  Windows machine!
 
+ Generally speaking: always remember that this will be compiled on dozens of
+ operating systems. Don't walk on the edge.
+
 Library
 =======
 
@@ -68,6 +80,9 @@ Library
  rather small and easy-to-follow. All the ones prefixed with 'curl_easy' are
  put in the lib/easy.c file.
 
+ All printf()-style functions use the supplied clones in lib/mprintf.c. This
+ makes sure we stay absolutely platform independent.
+
  curl_easy_init() allocates an internal struct and makes some initializations.
  The returned handle does not revail internals.
 
@@ -77,27 +92,31 @@ Library
 
  curl_easy_perform() does a whole lot of things:
 
- The function analyzes the URL, get the different components and connects to
- the remote host. This may involve using a proxy and/or using SSL. The
- GetHost() function in lib/hostip.c is used for looking up host names.
+ It starts off in the lib/easy.c file by calling curl_transfer(), but the main
+ work is lib/url.c. The function first analyzes the URL, it separates the
+ different components and connects to the remote host. This may involve using
+ a proxy and/or using SSL. The Curl_gethost() function in lib/hostip.c is used
+ for looking up host names.
 
- When connected, the proper function is called. The functions are named after
- the protocols they handle. ftp(), http(), dict(), etc. They all reside in
- their respective files (ftp.c, http.c and dict.c).
+ When connected, the proper protocol-specific function is called. The
+ functions are named after the protocols they handle. Curl_ftp(), Curl_http(),
+ Curl_dict(), etc. They all reside in their respective files (ftp.c, http.c
+ and dict.c).
 
- The protocol-specific functions deal with protocol-specific negotiations and
- setup. They have access to the sendf() (from lib/sendf.c) function to send
- printf-style formatted data to the remote host and when they're ready to make
- the actual file transfer they call the Transfer() function (in
- lib/download.c) to do the transfer. All printf()-style functions use the
- supplied clones in lib/mprintf.c.
+ The protocol-specific functions of course deal with protocol-specific
+ negotiations and setup. They have access to the Curl_sendf() (from
+ lib/sendf.c) function to send printf-style formatted data to the remote host
+ and when they're ready to make the actual file transfer they call the
+ Curl_Transfer() function (in lib/transfer.c) to setup the transfer and
+ returns. curl_transfer() then calls _Tranfer() in lib/transfer.c that
+ performs the entire file transfer.
 
- While transfering, the progress functions in lib/progress.c are called at a
+ During transfer, the progress functions in lib/progress.c are called at a
  frequent interval (or at the user's choice, a specified callback might get
  called). The speedcheck functions in lib/speedcheck.c are also used to verify
  that the transfer is as fast as required.
 
- When completed curl_easy_cleanup() should be called to free up used
+ When completed, the curl_easy_cleanup() should be called to free up used
  resources.
 
  HTTP(S)
@@ -106,9 +125,8 @@ Library
  code. There is a special file (lib/formdata.c) that offers all the multipart
  post functions.
 
- base64-functions for user+password stuff is in (lib/base64.c) and all
- functions for parsing and sending cookies are found in
- (lib/cookie.c).
+ base64-functions for user+password stuff (and more) is in (lib/base64.c) and
+ all functions for parsing and sending cookies are found in (lib/cookie.c).
 
  HTTPS uses in almost every means the same procedure as HTTP, with only two
  exceptions: the connect procedure is different and the function used to read
@@ -118,9 +136,17 @@ Library
 
  FTP
 
- The if2ip() function can be used for getting the IP number of a specified
- network interface, and it resides in lib/if2ip.c. It is only used for the FTP
- PORT command.
+ The Curl_if2ip() function can be used for getting the IP number of a
+ specified network interface, and it resides in lib/if2ip.c.
+
+ Curl_ftpsendf() is used for sending FTP commands to the remote server. It was
+ made a separate function to prevent us programmers from forgetting that they
+ must be CRLF terminated. They must also be sent in one single write() to make
+ firewalls and similar happy.
+
+ Kerberos
+
+ The kerberos support is mainly in lib/krb4.c and lib/security.c.
 
  TELNET
 
@@ -139,32 +165,54 @@ Library
  URL encoding and decoding, called escaping and unescaping in the source code,
  is found in lib/escape.c.
 
- While transfering data in Transfer() a few functions might get
+ While transfering data in _Transfer() a few functions might get
  used. curl_getdate() in lib/getdate.c is for HTTP date comparisons (and
  more).
 
  lib/getenv.c offers curl_getenv() which is for reading environment variables
  in a neat platform independent way. That's used in the client, but also in
- lib/url.c when checking the proxy environment variables.
+ lib/url.c when checking the proxy environment variables. Note that contrary
+ to the normal unix getenv(), this returns an allocated buffer that must be
+ free()ed after use.
 
  lib/netrc.c holds the .netrc parser
 
  lib/timeval.c features replacement functions for systems that don't have
- gettimeofday().
+ gettimeofday() and a few support functions for timeval convertions.
  
  A function named curl_version() that returns the full curl version string is
  found in lib/version.c.
 
+ If authentication is requested but no password is given, a getpass_r() clone
+ exists in lib/getpass.c. libcurl offers a custom callback that can be used
+ instead of this, but it doesn't change much to us.
+
+Return Codes and Informationals
+===============================
+
+ I've made things simple. Almost every function in libcurl returns a CURLcode,
+ that must be CURLE_OK if everything is OK or otherwise a suitable error code
+ as the curl/curl.h include file defines. The very spot that detects an error
+ must use the Curl_failf() function to set the human-readable error
+ description.
+
+ In aiding the user to understand what's happening and to debug curl usage, we
+ must supply a fair amount of informational messages by using the Curl_infof()
+ function. Those messages are only displayed when the user explicitly asks for
+ them. They are best used when revealing information that isn't otherwise
+ obvious.
+
 Client
 ======
 
  main() resides in src/main.c together with most of the client code.
  src/hugehelp.c is automatically generated by the mkhelp.pl perl script to
  display the complete "manual" and the src/urlglob.c file holds the functions
- used for the multiple-URL support.
+ used for the URL-"globbing" support. Globbing in the sense that the {} and []
+ expansion stuff is there.
 
- The client mostly mess around to setup its config struct properly, then it
- calls the curl_easy_*() functions of the library and when it gets back
+ The client mostly messes around to setup its 'config' struct properly, then
+ it calls the curl_easy_*() functions of the library and when it gets back
  control after the curl_easy_perform() it cleans up the library, checks status
  and exits.
 
@@ -173,10 +221,30 @@ Client
  curl_easy_getinfo() function to extract useful information from the curl
  session.
 
+ Recent versions may loop and do all that several times if many URLs were
+ specified on the command line or config file.
+
+Memory Debugging
+================
+
+ The file named lib/memdebug.c contains debug-versions of a few
+ functions. Functions such as malloc, free, fopen, fclose, etc that somehow
+ deal with resources that might give us problems if we "leak" them. The
+ functions in the memdebug system do nothing fancy, they do their normal
+ function and then log information about what they just did. The logged data
+ is then analyzed after a complete session,
+
+ memanalyze.pl is a perl script present only in CVS (not part of the release
+ archives) that analyzes a log file generated by the memdebug system. It
+ detects if resources are allocated but never freed and other kinds of errors
+ related to resource management.
+
+ Use -DMALLOCDEBUG when compiling to enable memory debugging.
+
 Test Suite
 ==========
 
- During November 2000, a test suite has evolved. It is placed in its own
+ Since November 2000, a test suite has evolved. It is placed in its own
  subdirectory directly off the root in the curl archive tree, and it contains
  a bunch of scripts and a lot of test case data.
 
@@ -186,3 +254,17 @@ Test Suite
 
  You'll find a complete description of the test case data files in the README
  file in the test directory.
+
+ The test suite automatically detects if curl was built with the memory
+ debugging enabled, and if it was it will detect memory leaks too.
+
+Building Releases
+=================
+
+ There's no magic to this. When you consider everything stable enough to be
+ released, run the 'maketgz' script (using 'make distcheck' will give you a
+ pretty good view on the status of the current sources). maketgz prompts for
+ version number of the client and the library before it creates a release
+ archive.
+
+ You must have autoconf installed to build release archives.

docs/Makefile.am

@@ -12,11 +12,15 @@ man_MANS = \
 	curl_easy_perform.3 \
 	curl_easy_setopt.3 \
 	curl_formparse.3 \
+	curl_formfree.3 \
 	curl_getdate.3 \
 	curl_getenv.3 \
 	curl_slist_append.3 \
 	curl_slist_free_all.3 \
 	curl_version.3
 
-EXTRA_DIST = $(man_MANS)
+EXTRA_DIST = $(man_MANS) \
+	MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS \
+	LIBCURL README.win32 RESOURCES TODO TheArtOfHttpScripting
 
+SUBDIRS = examples

docs/RESOURCES

@@ -102,6 +102,12 @@ Similar Tools
 
   Kermit  - http://www.columbia.edu/kermit/ftpclient
 
+  Pavuk   - http://www.idata.sk/~ondrej/pavuk/
+
+  httpr   - http://zwolak.dhs.org/httpr/
+
+  puf     - http://www.inf.tu-dresden.de/~ob6/sw/puf.html
+
 Related Software
 ----------------
   ftpparse - http://cr.yp.to/ftpparse.html parses FTP LIST responses

docs/TODO

@@ -16,10 +16,6 @@ For the future
  * Make SSL session ids get used if multiple HTTPS documents from the same
    host is requested.
 
- * Improve the command line option parser to accept '-m300' as well as the '-m
-   300' convention. It should be able to work if '-m300' is considered to be
-   space separated to the next option.
-
  * Make the curl tool support URLs that start with @ that would then mean that
    the following is a plain list with URLs to download. Thus @filename.txt
    reads a list of URLs from a local file. A fancy option would then be to
@@ -27,16 +23,12 @@ For the future
    URLs mentioned in the list. I figure -O or something would have to be
    implied by such an action.
 
- * Make curl with multiple URLs, even outside of {}-letters. I could also
-   imagine an optional fork()ed system that downloads each URL in its own
-   thread. It should of course have a maximum amount of simultaneous fork()s.
-
  * Improve the regular progress meter with --continue is used. It should be
    noticable when there's a resume going on.
 
  * Add a command line option that allows the output file to get the same time
-   stamp as the remote file. This requires some fiddling on FTP but comes
-   almost free for HTTP.
+   stamp as the remote file. We already are capable of fetching the remote
+   file's date.
 
  * Make the SSL layer option capable of using the Mozilla Security Services as
    an alternative to OpenSSL:
@@ -47,6 +39,7 @@ For the future
 
  * Make the easy-interface support multiple file transfers. If they're done
    to the same host, they should use persistant connections or similar.
+   Figure out a nice design for this.
 
  * Add asynchronous name resolving, as this enables full timeout support for
    fork() systems.

docs/curl.1

@@ -2,18 +2,19 @@
 .\" nroff -man curl.1
 .\" Written by Daniel Stenberg
 .\"
-.TH curl 1 "4 January 2001" "Curl 7.5.2" "Curl Manual"
+.TH curl 1 "19 January 2001" "Curl 7.6" "Curl Manual"
 .SH NAME
 curl \- get a URL with FTP, TELNET, LDAP, GOPHER, DICT, FILE, HTTP or
 HTTPS syntax.
 .SH SYNOPSIS
 .B curl [options]
-.I url
+.I [URL...]
 .SH DESCRIPTION
 .B curl
-is a client to get documents/files from servers, using any of the
-supported protocols. The command is designed to work without user
-interaction or any kind of interactivity.
+is a client to get documents/files from or send documents to a server, using
+any of the supported protocols (HTTP, HTTPS, FTP, GOPHER, DICT, TELNET, LDAP
+or FILE). The command is designed to work without user interaction or any kind
+of interactivity.
 
 curl offers a busload of useful tricks like proxy support, user
 authentication, ftp upload, HTTP post, SSL (https:) connections, cookies, file
@@ -37,6 +38,9 @@ It is possible to specify up to 9 sets or series for a URL, but no nesting is
 supported at the moment:
 
  http://www.any.org/archive[1996-1999]/volume[1-4]part{a,b,c,index}.html
+
+Starting with curl 7.6, you can specify any amount of URLs on the command
+line. They will be fetched in a sequential manner in the specified order.
 .SH OPTIONS
 .IP "-a/--append"
 (FTP)
@@ -120,11 +124,13 @@ To post data purely binary, you should instead use the --data-binary option.
 
 -d/--data is the same as --data-ascii.
 
-If this option is used serveral times, the last one will be used.
+If this option is used serveral times, the ones following the first will
+append data.
 .IP "--data-ascii <data>"
 (HTTP) This is an alias for the -d/--data option.
 
-If this option is used serveral times, the last one will be used.
+If this option is used serveral times, the ones following the first will
+append data.
 .IP "--data-binary <data>"
 (HTTP) This posts data in a similar manner as --data-ascii does, although when
 using this option the entire context of the posted data is kept as-is. If you
@@ -132,6 +138,9 @@ want to post a binary file without the strip-newlines feature of the
 --data-ascii option, this is for you.
 
 If this option is used serveral times, the last one will be used.
+
+If this option is used serveral times, the ones following the first will
+append data.
 .IP "-D/--dump-header <file>"
 (HTTP/FTP)
 Write the HTTP headers to this file. Write the FTP file info to this
@@ -196,6 +205,12 @@ To read the file's content from stdin insted of a file, use - where the file
 name should've been. This goes for both @ and < constructs.
 
 This option can be used multiple times.
+.IP "-g/--globoff"
+This option switches off the "URL globbing parser". When you set this option,
+you can specify URLs that contain the letters {}[] without having them being
+interpreted by curl itself. Note that these letters are not normal legal URL
+contents but they should be encoded according to the URI standard. (Option
+added in curl 7.6)
 .IP "-h/--help"
 Usage help.
 .IP "-H/--header <header>"
@@ -311,11 +326,12 @@ or use several variables like:
 
   curl http://{site,host}.host[1-5].com -o "#1_#2"
 
-If this option is used serveral times, the last one will be used.
+You may use this option as many times as you have number of URLs.
 .IP "-O/--remote-name"
 Write output to a local file named like the remote file we get. (Only
 the file part of the remote file is used, the path is cut off.)
 
+You may use this option as many times as you have number of URLs.
 .IP "-p/--proxytunnel"
 When an HTTP proxy is used, this option will cause non-HTTP protocols to
 attempt to tunnel through the proxy instead of merely using it to do HTTP-like
@@ -436,10 +452,14 @@ password is specified, curl will ask for it interactively.
 
 If this option is used serveral times, the last one will be used.
 .IP "--url <URL>"
-Set the URL to fetch. This option is mostly handy when you wanna specify URL
-in a config file.
+Specify a URL to fetch. This option is mostly handy when you wanna specify
+URL(s) in a config file.
 
-If this option is used serveral times, the last one will be used.
+This option may be used any number of times. To control where this URL is written, use the
+.I -o
+or the
+.I -O
+options.
 .IP "-v/--verbose"
 Makes the fetching more verbose/talkative. Mostly usable for
 debugging. Lines starting with '>' means data sent by curl, '<'
@@ -765,6 +785,9 @@ If you do find bugs, mail them to curl-bug@haxx.se.
  - T. Bharath <TBharath@responsenetworks.com>
  - Alexander Kourakos <awk@users.sourceforge.net>
  - James Griffiths <griffiths_james@yahoo.com>
+ - Loic Dachary <loic@senga.org>
+ - Robert Weaver <robert.weaver@sabre.com>
+ - Ingo Ralf Blum <ingoralfblum@ingoralfblum.com>
 
 .SH WWW
 http://curl.haxx.se

docs/curl_easy_perform.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" Written by daniel@haxx.se
 .\"
-.TH curl_easy_perform 3 "26 May 2000" "Curl 7.0" "libcurl Manual"
+.TH curl_easy_perform 3 "25 Jan 2001" "Curl 7.0" "libcurl Manual"
 .SH NAME
 curl_easy_perform - Do the actual transfer in a "easy" session
 .SH SYNOPSIS
@@ -16,6 +16,10 @@ are made, and will perform the transfer as described in the options.
 It must be called with the same
 .I handle
 as input as the curl_easy_init call returned.
+
+You are only allowed to call this function once using the same handle. If you
+want to do repeated calls, you must call curl_easy_cleanup and curl_easy_init
+again first.
 .SH RETURN VALUE
 0 means everything was ok, non-zero means an error occurred as
 .I <curl/curl.h>

docs/examples/Makefile.am

@@ -0,0 +1,11 @@
+#
+# $Id$
+#
+
+AUTOMAKE_OPTIONS = foreign no-dependencies
+
+EXTRA_DIST = 
+	README curlgtk.c sepheaders.c simple.c
+
+all:
+	@echo "done"

include/curl/curl.h

@@ -166,10 +166,6 @@ typedef enum {
 
 #define CURL_ERROR_SIZE 256
 
-/* maximum URL length we deal with in headers */
-#define URL_MAX_LENGTH 4096 
-#define URL_MAX_LENGTH_TXT "4095"
-
 /* name is uppercase CURLOPT_<name>,
    type is one of the defined CURLOPTTYPE_<type>
    number is unique identifier */
@@ -435,8 +431,10 @@ typedef enum {
 
    NOTE: they return TRUE if the strings match *case insensitively*.
  */
-extern int (strequal)(const char *s1, const char *s2);
-extern int (strnequal)(const char *s1, const char *s2, size_t n);
+extern int (Curl_strequal)(const char *s1, const char *s2);
+extern int (Curl_strnequal)(const char *s1, const char *s2, size_t n);
+#define strequal(a,b) Curl_strequal(a,b)
+#define strnequal(a,b,c) Curl_strnequal(a,b,c)
 
 /* external form function */
 int curl_formparse(char *string,
@@ -454,8 +452,8 @@ char *curl_getenv(char *variable);
 char *curl_version(void);
 
 /* This is the version number */
-#define LIBCURL_VERSION "7.5.2"
-#define LIBCURL_VERSION_NUM 0x070502
+#define LIBCURL_VERSION "7.6-pre4"
+#define LIBCURL_VERSION_NUM 0x070600
 
 /* linked-list structure for the CURLOPT_QUOTE option (and other) */
 struct curl_slist {

include/curl/mprintf.h

@@ -55,26 +55,28 @@
 
 #include <stdarg.h>
 
-int mprintf(const char *format, ...);
-int mfprintf(FILE *fd, const char *format, ...);
-int msprintf(char *buffer, const char *format, ...);
-int msnprintf(char *buffer, size_t maxlength, const char *format, ...);
-int mvprintf(const char *format, va_list args);
-int mvfprintf(FILE *fd, const char *format, va_list args);
-int mvsprintf(char *buffer, const char *format, va_list args);
-int mvsnprintf(char *buffer, size_t maxlength, const char *format, va_list args);
-char *maprintf(const char *format, ...);
-char *mvaprintf(const char *format, va_list args);
+int curl_mprintf(const char *format, ...);
+int curl_mfprintf(FILE *fd, const char *format, ...);
+int curl_msprintf(char *buffer, const char *format, ...);
+int curl_msnprintf(char *buffer, size_t maxlength, const char *format, ...);
+int curl_mvprintf(const char *format, va_list args);
+int curl_mvfprintf(FILE *fd, const char *format, va_list args);
+int curl_mvsprintf(char *buffer, const char *format, va_list args);
+int curl_mvsnprintf(char *buffer, size_t maxlength, const char *format, va_list args);
+char *curl_maprintf(const char *format, ...);
+char *curl_mvaprintf(const char *format, va_list args);
 
 #ifdef _MPRINTF_REPLACE
-# define printf mprintf
-# define fprintf mfprintf
-# define sprintf msprintf
-# define snprintf msnprintf
-# define vprintf mvprintf
-# define vfprintf mvfprintf
-# define vsprintf mvsprintf
-# define vsnprintf mvsnprintf
+# define printf curl_mprintf
+# define fprintf curl_mfprintf
+# define sprintf curl_msprintf
+# define snprintf curl_msnprintf
+# define vprintf curl_mvprintf
+# define vfprintf curl_mvfprintf
+# define vsprintf curl_mvsprintf
+# define vsnprintf curl_mvsnprintf
+# define aprintf curl_maprintf
+# define vaprintf curl_mvaprintf
 #endif
 
 #endif /* H_MPRINTF */

lib/Makefile.am

@@ -4,6 +4,10 @@
 
 AUTOMAKE_OPTIONS = foreign
 
+EXTRA_DIST = getdate.y \
+       Makefile.b32 Makefile.b32.resp Makefile.m32 Makefile.vc6 \
+       libcurl.def dllinit.c
+
 lib_LTLIBRARIES = libcurl.la
 
 # Some flags needed when trying to cause warnings ;-)
@@ -49,12 +53,14 @@ cookie.c       formdata.h     http.c         sendf.c        \
 cookie.h       ftp.c          http.h         sendf.h        url.c \
 dict.c         ftp.h          if2ip.c        speedcheck.c   url.h \
 dict.h         getdate.c      if2ip.h        speedcheck.h   urldata.h \
-download.c     getdate.h      ldap.c         ssluse.c       version.c \
-download.h     getenv.c       ldap.h         ssluse.h       \
+getdate.h      ldap.c         ssluse.c       version.c \
+getenv.c       ldap.h         ssluse.h       \
 escape.c       getenv.h       mprintf.c      telnet.c       \
 escape.h       getpass.c      netrc.c        telnet.h       \
-getinfo.c highlevel.c strequal.c strequal.h easy.c \
-security.h security.c krb4.c memdebug.c memdebug.h
+getinfo.c transfer.c strequal.c strequal.h easy.c \
+security.h security.c krb4.c krb4.h memdebug.c memdebug.h inet_ntoa_r.h
+
+noinst_HEADERS = setup.h transfer.h
 
 # Say $(srcdir), so GNU make does not report an ambiguity with the .y.c rule.
 $(srcdir)/getdate.c: getdate.y

lib/Makefile.b32

@@ -29,7 +29,7 @@ LIBCURLLIB = libcurl.lib
 SOURCES	   = \
 	base64.c \
 	cookie.c \
-	download.c \
+	transfer.c \
 	escape.c \
 	formdata.c \
 	ftp.c \
@@ -54,7 +54,6 @@ SOURCES	   = \
 	getinfo.c \
 	version.c \
 	easy.c \
-	highlevel.c \
 	strequal.c
 
 OBJECTS = $(SOURCES:.c=.obj)

lib/Makefile.b32.resp

@@ -1,6 +1,6 @@
 +base64.obj &
 +cookie.obj &
-+download.obj &
++transfer.obj &
 +escape.obj &
 +formdata.obj &
 +ftp.obj &
@@ -25,5 +25,4 @@
 +getinfo.obj &
 +version.obj &
 +easy.obj &
-+highlevel.obj &
 +strequal.obj

lib/Makefile.in

@@ -1,357 +0,0 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-#
-# $Id$
-#
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
-AS = @AS@
-CC = @CC@
-DLLTOOL = @DLLTOOL@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAKEINFO = @MAKEINFO@
-NROFF = @NROFF@
-OBJDUMP = @OBJDUMP@
-PACKAGE = @PACKAGE@
-PERL = @PERL@
-RANLIB = @RANLIB@
-VERSION = @VERSION@
-YACC = @YACC@
-
-AUTOMAKE_OPTIONS = foreign
-
-lib_LTLIBRARIES = libcurl.la
-
-# Some flags needed when trying to cause warnings ;-)
-# CFLAGS = -DMALLOCDEBUG -g # -Wall #-pedantic
-
-INCLUDES = -I$(top_srcdir)/include
-
-libcurl_la_LDFLAGS = -version-info 1:0:0
-# This flag accepts an argument of the form current[:revision[:age]]. So,
-# passing -version-info 3:12:1 sets current to 3, revision to 12, and age to
-# 1.
-#
-# If either revision or age are omitted, they default to 0. Also note that age
-# must be less than or equal to the current interface number.
-#
-# Here are a set of rules to help you update your library version information: 
-#
-# 1.Start with version information of 0:0:0 for each libtool library.
-#
-# 2.Update the version information only immediately before a public release of
-# your software. More frequent updates are unnecessary, and only guarantee
-# that the current interface number gets larger faster.
-#
-# 3.If the library source code has changed at all since the last update, then
-# increment revision (c:r:a becomes c:r+1:a).
-#
-# 4.If any interfaces have been added, removed, or changed since the last
-# update, increment current, and set revision to 0.
-#
-# 5.If any interfaces have been added since the last public release, then
-# increment age.
-#
-# 6.If any interfaces have been removed since the last public release, then
-# set age to 0.
-#
-
-libcurl_la_SOURCES =  arpa_telnet.h  file.c         getpass.h      netrc.h        timeval.c base64.c       file.h         hostip.c       progress.c     timeval.h base64.h       formdata.c     hostip.h       progress.h     cookie.c       formdata.h     http.c         sendf.c        cookie.h       ftp.c          http.h         sendf.h        url.c dict.c         ftp.h          if2ip.c        speedcheck.c   url.h dict.h         getdate.c      if2ip.h        speedcheck.h   urldata.h download.c     getdate.h      ldap.c         ssluse.c       version.c download.h     getenv.c       ldap.h         ssluse.h       escape.c       getenv.h       mprintf.c      telnet.c       escape.h       getpass.c      netrc.c        telnet.h       getinfo.c highlevel.c strequal.c strequal.h easy.c security.h security.c krb4.c memdebug.c memdebug.h
-
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h ../src/config.h
-CONFIG_CLEAN_FILES = 
-LTLIBRARIES =  $(lib_LTLIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I.. -I../src
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-libcurl_la_LIBADD = 
-libcurl_la_OBJECTS =  file.lo timeval.lo base64.lo hostip.lo progress.lo \
-formdata.lo cookie.lo http.lo sendf.lo ftp.lo url.lo dict.lo if2ip.lo \
-speedcheck.lo getdate.lo download.lo ldap.lo ssluse.lo version.lo \
-getenv.lo escape.lo mprintf.lo telnet.lo getpass.lo netrc.lo getinfo.lo \
-highlevel.lo strequal.lo easy.lo security.lo krb4.lo memdebug.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = gtar
-GZIP_ENV = --best
-SOURCES = $(libcurl_la_SOURCES)
-OBJECTS = $(libcurl_la_OBJECTS)
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps lib/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-libLTLIBRARIES:
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-
-distclean-libLTLIBRARIES:
-
-maintainer-clean-libLTLIBRARIES:
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(libdir)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
-	  else :; fi; \
-	done
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
-	done
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
-.c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-
-maintainer-clean-libtool:
-
-libcurl.la: $(libcurl_la_OBJECTS) $(libcurl_la_DEPENDENCIES)
-	$(LINK) -rpath $(libdir) $(libcurl_la_LDFLAGS) $(libcurl_la_OBJECTS) $(libcurl_la_LIBADD) $(LIBS)
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = lib
-
-distdir: $(DISTFILES)
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am: all-am
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am: install-libLTLIBRARIES
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-libLTLIBRARIES
-uninstall: uninstall-am
-all-am: Makefile $(LTLIBRARIES)
-all-redirect: all-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-	$(mkinstalldirs)  $(DESTDIR)$(libdir)
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-tags \
-		mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
-		clean-generic mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-libLTLIBRARIES distclean-compile \
-		distclean-libtool distclean-tags distclean-generic \
-		clean-am
-	-rm -f libtool
-
-distclean: distclean-am
-
-maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
-distclean-compile clean-compile maintainer-clean-compile \
-mostlyclean-libtool distclean-libtool clean-libtool \
-maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
-
-
-# Say $(srcdir), so GNU make does not report an ambiguity with the .y.c rule.
-$(srcdir)/getdate.c: getdate.y
-	cd $(srcdir) && \
-	  $(YACC) $(YFLAGS) getdate.y; \
-	  mv -f y.tab.c getdate.c
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

lib/Makefile.m32

@@ -30,16 +30,16 @@ libcurl_a_SOURCES = arpa_telnet.h file.c getpass.h netrc.h timeval.c base64.c \
 	file.h hostip.c progress.c timeval.h base64.h formdata.c hostip.h progress.h	\
 	cookie.c formdata.h http.c sendf.c cookie.h ftp.c http.h sendf.h url.c dict.c	\
 	ftp.h if2ip.c speedcheck.c url.h dict.h getdate.c if2ip.h speedcheck.h		\
-	urldata.h download.c getdate.h ldap.c ssluse.c version.c download.h getenv.c	\
+	urldata.h transfer.c getdate.h ldap.c ssluse.c version.c transfer.h getenv.c	\
 	ldap.h ssluse.h escape.c getenv.h mprintf.c telnet.c escape.h getpass.c netrc.c	\
-	telnet.h getinfo.c highlevel.c strequal.c strequal.h easy.c security.h		\
+	telnet.h getinfo.c strequal.c strequal.h easy.c security.h		\
 	security.c krb4.c
 
 libcurl_a_OBJECTS =  file.o timeval.o base64.o hostip.o progress.o \
 	formdata.o cookie.o http.o sendf.o ftp.o url.o dict.o if2ip.o \
-	speedcheck.o getdate.o download.o ldap.o ssluse.o version.o \
+	speedcheck.o getdate.o transfer.o ldap.o ssluse.o version.o \
 	getenv.o escape.o mprintf.o telnet.o getpass.o netrc.o getinfo.o \
-	highlevel.o strequal.o easy.o security.o krb4.o
+	strequal.o easy.o security.o krb4.o
 
 LIBRARIES =  $(libcurl_a_LIBRARIES)
 SOURCES = $(libcurl_a_SOURCES)

lib/Makefile.vc6

@@ -33,7 +33,7 @@ LINKSLIBS = libeay32.lib ssleay32.lib RSAglue.lib
 RELEASE_OBJS= \
 	base64r.obj \
 	cookier.obj \
-	downloadr.obj \
+	transferr.obj \
 	escaper.obj \
 	formdatar.obj \
 	ftpr.obj \
@@ -58,13 +58,12 @@ RELEASE_OBJS= \
 	getinfor.obj \
 	versionr.obj \
 	easyr.obj \
-	highlevelr.obj \
 	strequalr.obj
 
 DEBUG_OBJS= \
 	base64d.obj \
 	cookied.obj \
-	downloadd.obj \
+	transferd.obj \
 	escaped.obj \
 	formdatad.obj \
 	ftpd.obj \
@@ -89,13 +88,12 @@ DEBUG_OBJS= \
 	getinfod.obj \
 	versiond.obj  \
 	easyd.obj \
-	highleveld.obj \
 	strequald.obj
 
 RELEASE_SSL_OBJS= \
 	base64rs.obj \
 	cookiers.obj \
-	downloadrs.obj \
+	transferrs.obj \
 	escapers.obj \
 	formdatars.obj \
 	ftprs.obj \
@@ -120,13 +118,12 @@ RELEASE_SSL_OBJS= \
 	getinfors.obj \
 	versionrs.obj \
 	easyrs.obj \
-	highlevelrs.obj \
 	strequalrs.obj
 
 LINK_OBJS= \
 	base64.obj \
 	cookie.obj \
-	download.obj \
+	transfer.obj \
 	escape.obj \
 	formdata.obj \
 	ftp.obj \
@@ -151,7 +148,6 @@ LINK_OBJS= \
 	getinfo.obj \
 	version.obj \
 	easy.obj \
-	highlevel.obj \
 	strequal.obj
 
 all : release
@@ -170,8 +166,8 @@ base64r.obj: base64.c
 	$(CCR) $(CFLAGS) base64.c
 cookier.obj: cookie.c
 	$(CCR) $(CFLAGS) cookie.c
-downloadr.obj: download.c
-	$(CCR) $(CFLAGS) download.c
+transferr.obj: transfer.c
+	$(CCR) $(CFLAGS) transfer.c
 escaper.obj: escape.c
 	$(CCR) $(CFLAGS) escape.c
 formdatar.obj: formdata.c
@@ -220,8 +216,6 @@ versionr.obj: version.c
 	$(CCR) $(CFLAGS) version.c
 easyr.obj: easy.c
 	$(CCR) $(CFLAGS) easy.c
-highlevelr.obj: highlevel.c
-	$(CCR) $(CFLAGS) highlevel.c
 strequalr.obj: strequal.c
 	$(CCR) $(CFLAGS) strequal.c
 
@@ -230,8 +224,8 @@ base64d.obj: base64.c
 	$(CCD) $(CFLAGS) base64.c
 cookied.obj: cookie.c
 	$(CCD) $(CFLAGS) cookie.c
-downloadd.obj: download.c
-	$(CCD) $(CFLAGS) download.c
+transferd.obj: transfer.c
+	$(CCD) $(CFLAGS) transfer.c
 escaped.obj: escape.c
 	$(CCD) $(CFLAGS) escape.c
 formdatad.obj: formdata.c
@@ -280,8 +274,6 @@ versiond.obj: version.c
 	$(CCD) $(CFLAGS) version.c
 easyd.obj: easy.c
 	$(CCD) $(CFLAGS) easy.c
-highleveld.obj: highlevel.c
-	$(CCD) $(CFLAGS) highlevel.c
 strequald.obj: strequal.c
 	$(CCD) $(CFLAGS) strequal.c
 
@@ -291,8 +283,8 @@ base64rs.obj: base64.c
 	$(CCRS) $(CFLAGS) base64.c
 cookiers.obj: cookie.c
 	$(CCRS) $(CFLAGS) cookie.c
-downloadrs.obj: download.c
-	$(CCRS) $(CFLAGS) download.c
+transferrs.obj: transfer.c
+	$(CCRS) $(CFLAGS) transfer.c
 escapers.obj: escape.c
 	$(CCRS) $(CFLAGS) escape.c
 formdatars.obj: formdata.c
@@ -341,8 +333,6 @@ versionrs.obj: version.c
 	$(CCRS) $(CFLAGS) version.c
 easyrs.obj: easy.c
 	$(CCRS) $(CFLAGS) easy.c
-highlevelrs.obj: highlevel.c
-	$(CCRS) $(CFLAGS) highlevel.c
 strequalrs.obj: strequal.c
 	$(CCRS) $(CFLAGS) strequal.c
 

lib/arpa_telnet.h

@@ -63,6 +63,7 @@
 #define SYNCH	242		/* for telfunc calls */
 
 #ifdef TELCMDS
+static
 char *telcmds[] = {
 	"EOF", "SUSP", "ABORT", "EOR",
 	"SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC",
@@ -124,6 +125,7 @@ extern char *telcmds[];
 
 #define	NTELOPTS	(1+TELOPT_NEW_ENVIRON)
 #ifdef TELOPTS
+static
 char *telopts[NTELOPTS+1] = {
 	"BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME",
 	"STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP",

lib/base64.c

@@ -55,7 +55,7 @@ static int pos(char c)
 }
 
 #if 1
-int base64_encode(const void *data, int size, char **str)
+int Curl_base64_encode(const void *data, int size, char **str)
 {
   char *s, *p;
   int i;
@@ -93,7 +93,7 @@ int base64_encode(const void *data, int size, char **str)
 }
 #endif
 
-int base64_decode(const char *str, void *data)
+int Curl_base64_decode(const char *str, void *data)
 {
   const char *p;
   unsigned char *q;

lib/base64.h

@@ -34,6 +34,7 @@
 #ifndef __BASE64_H
 #define __BASE64_H
 
-int base64_encode(const void *data, int size, char **str);
+int Curl_base64_encode(const void *data, int size, char **str);
+int Curl_base64_decode(const char *str, void *data);
 
 #endif

lib/cookie.c

@@ -100,7 +100,8 @@ Example set of cookies:
  *
  ***************************************************************************/
 
-struct Cookie *cookie_add(struct CookieInfo *c,
+struct Cookie *
+Curl_cookie_add(struct CookieInfo *c,
                 bool httpheader, /* TRUE if HTTP header-style line */
                 char *lineptr) /* first non-space of the line */
 {
@@ -347,7 +348,7 @@ struct Cookie *cookie_add(struct CookieInfo *c,
  * called before any cookies are set. File may be NULL.
  *
  ****************************************************************************/
-struct CookieInfo *cookie_init(char *file)
+struct CookieInfo *Curl_cookie_init(char *file)
 {
   char line[MAX_COOKIE_LINE];
   struct CookieInfo *c;
@@ -375,7 +376,7 @@ struct CookieInfo *cookie_init(char *file)
         while(*lineptr && isspace((int)*lineptr))
           lineptr++;
 
-        cookie_add(c, TRUE, lineptr);
+        Curl_cookie_add(c, TRUE, lineptr);
       }
       else {
         /* This might be a netscape cookie-file line, get it! */
@@ -383,7 +384,7 @@ struct CookieInfo *cookie_init(char *file)
         while(*lineptr && isspace((int)*lineptr))
           lineptr++;
 
-        cookie_add(c, FALSE, lineptr);
+        Curl_cookie_add(c, FALSE, lineptr);
       }
     }
     if(fromfile)
@@ -405,7 +406,7 @@ struct CookieInfo *cookie_init(char *file)
  *
  ****************************************************************************/
 
-struct Cookie *cookie_getlist(struct CookieInfo *c,
+struct Cookie *Curl_cookie_getlist(struct CookieInfo *c,
                                    char *host, char *path, bool secure)
 {
    struct Cookie *newco;
@@ -473,7 +474,7 @@ struct Cookie *cookie_getlist(struct CookieInfo *c,
  *
  ****************************************************************************/
 
-void cookie_freelist(struct Cookie *co)
+void Curl_cookie_freelist(struct Cookie *co)
 {
    struct Cookie *next;
    if(co) {
@@ -493,7 +494,7 @@ void cookie_freelist(struct Cookie *co)
  * Free a "cookie object" previous created with cookie_init().
  *
  ****************************************************************************/
-void cookie_cleanup(struct CookieInfo *c)
+void Curl_cookie_cleanup(struct CookieInfo *c)
 {
    struct Cookie *co;
    struct Cookie *next;

lib/cookie.h

@@ -63,10 +63,10 @@ struct CookieInfo {
 #define MAX_NAME 256
 #define MAX_NAME_TXT "255"
 
-struct Cookie *cookie_add(struct CookieInfo *, bool, char *);
-struct CookieInfo *cookie_init(char *);
-struct Cookie *cookie_getlist(struct CookieInfo *, char *, char *, bool);
-void cookie_freelist(struct Cookie *);
-void cookie_cleanup(struct CookieInfo *);
+struct Cookie *Curl_cookie_add(struct CookieInfo *, bool, char *);
+struct CookieInfo *Curl_cookie_init(char *);
+struct Cookie *Curl_cookie_getlist(struct CookieInfo *, char *, char *, bool);
+void Curl_cookie_freelist(struct Cookie *);
+void Curl_cookie_cleanup(struct CookieInfo *);
 
 #endif

lib/dict.c

@@ -71,7 +71,7 @@
 
 #include "urldata.h"
 #include <curl/curl.h>
-#include "download.h"
+#include "transfer.h"
 #include "sendf.h"
 
 #include "progress.h"
@@ -80,12 +80,12 @@
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
 
-CURLcode dict_done(struct connectdata *conn)
+CURLcode Curl_dict_done(struct connectdata *conn)
 {
   return CURLE_OK;
 }
 
-CURLcode dict(struct connectdata *conn)
+CURLcode Curl_dict(struct connectdata *conn)
 {
   int nth;
   char *word;
@@ -141,7 +141,7 @@ CURLcode dict(struct connectdata *conn)
       nth = atoi(nthdef);
     }
       
-    sendf(data->firstsocket, data,
+    Curl_sendf(data->firstsocket, conn,
                "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
                "MATCH "
                "%s "    /* database */
@@ -154,7 +154,7 @@ CURLcode dict(struct connectdata *conn)
                word
                );
     
-    result = Transfer(conn, data->firstsocket, -1, FALSE, bytecount,
+    result = Curl_Transfer(conn, data->firstsocket, -1, FALSE, bytecount,
                            -1, NULL); /* no upload */
       
     if(result)
@@ -191,7 +191,7 @@ CURLcode dict(struct connectdata *conn)
       nth = atoi(nthdef);
     }
       
-    sendf(data->firstsocket, data,
+    Curl_sendf(data->firstsocket, conn,
                "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
                "DEFINE "
                "%s "     /* database */
@@ -202,7 +202,7 @@ CURLcode dict(struct connectdata *conn)
                word
                );
     
-    result = Transfer(conn, data->firstsocket, -1, FALSE, bytecount,
+    result = Curl_Transfer(conn, data->firstsocket, -1, FALSE, bytecount,
                            -1, NULL); /* no upload */
     
     if(result)
@@ -220,13 +220,13 @@ CURLcode dict(struct connectdata *conn)
         if (ppath[i] == ':')
           ppath[i] = ' ';
       }
-      sendf(data->firstsocket, data,
+      Curl_sendf(data->firstsocket, conn,
                  "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
                  "%s\n"
                  "QUIT\n",
                  ppath);
       
-      result = Transfer(conn, data->firstsocket, -1, FALSE, bytecount,
+      result = Curl_Transfer(conn, data->firstsocket, -1, FALSE, bytecount,
                              -1, NULL);
       
       if(result)

lib/dict.h

@@ -23,7 +23,7 @@
  *
  * $Id$
  *****************************************************************************/
-CURLcode dict(struct connectdata *conn);
-CURLcode dict_done(struct connectdata *conn);
+CURLcode Curl_dict(struct connectdata *conn);
+CURLcode Curl_dict_done(struct connectdata *conn);
 
 #endif

lib/download.c

@@ -1,100 +0,0 @@
-/*****************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
- *                             \___|\___/|_| \_\_____|
- *
- * Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
- * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- * $Id$
- *****************************************************************************/
-
-#include "setup.h"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_SYS_SELECT_H
-#include <sys/select.h>
-#endif
-
-#include "urldata.h"
-#include <curl/curl.h>
-
-#ifdef __BEOS__
-#include <net/socket.h>
-#endif
-
-#ifdef WIN32
-#if !defined( __GNUC__) || defined(__MINGW32__)
-#include <winsock.h>
-#endif
-#include <time.h> /* for the time_t typedef! */
-
-#if defined(__GNUC__) && defined(TIME_WITH_SYS_TIME)
-#include <sys/time.h>
-#endif
-
-#endif
-
-#include "progress.h"
-#include "speedcheck.h"
-#include "sendf.h"
-
-#include <curl/types.h>
-
-/* --- download and upload a stream from/to a socket --- */
-
-/* Parts of this function was brought to us by the friendly Mark Butler
-   <butlerm@xmission.com>. */
-
-CURLcode 
-Transfer(CURLconnect *c_conn,
-         /* READ stuff */
-	  int sockfd,		/* socket to read from or -1 */
-	  int size,		/* -1 if unknown at this point */
-	  bool getheader,	/* TRUE if header parsing is wanted */
-	  long *bytecountp,	/* return number of bytes read or NULL */
-          
-          /* WRITE stuff */
-          int writesockfd,      /* socket to write to, it may very well be
-                                   the same we read from. -1 disables */
-          long *writebytecountp /* return number of bytes written or NULL */
-          )
-{
-  struct connectdata *conn = (struct connectdata *)c_conn;
-  if(!conn)
-    return CURLE_BAD_FUNCTION_ARGUMENT;
-
-  /* now copy all input parameters */
-  conn->sockfd = sockfd;
-  conn->size = size;
-  conn->getheader = getheader;
-  conn->bytecountp = bytecountp;
-  conn->writesockfd = writesockfd;
-  conn->writebytecountp = writebytecountp;
-
-  return CURLE_OK;
-
-}
-          

lib/easy.c

@@ -72,7 +72,7 @@
 
 #include "urldata.h"
 #include <curl/curl.h>
-#include "highlevel.h"
+#include "transfer.h"
 #include <curl/types.h>
 
 #define _MPRINTF_REPLACE /* use our functions only */

lib/file.c

@@ -106,7 +106,7 @@ CURLcode file(struct connectdata *conn)
   struct UrlData *data = conn->data;
   char *buf = data->buffer;
   int bytecount = 0;
-  struct timeval start = tvnow();
+  struct timeval start = Curl_tvnow();
   struct timeval now = start;
   int fd;
   char *actual_path = curl_unescape(path, 0);
@@ -139,7 +139,7 @@ CURLcode file(struct connectdata *conn)
      it avoids problems with select() and recv() on file descriptors
      in Winsock */
   if(expected_size != -1)
-    pgrsSetDownloadSize(data, expected_size);
+    Curl_pgrsSetDownloadSize(data, expected_size);
 
   while (res == CURLE_OK) {
     nread = read(fd, buf, BUFSIZE-1);
@@ -155,16 +155,16 @@ CURLcode file(struct connectdata *conn)
        to prevent CR/LF translation (this then goes to a binary mode
        file descriptor). */
 
-    res = client_write(data, CLIENTWRITE_BODY, buf, nread);
+    res = Curl_client_write(data, CLIENTWRITE_BODY, buf, nread);
     if(res)
       return res;
 
-    now = tvnow();
-    if(pgrsUpdate(data))
+    now = Curl_tvnow();
+    if(Curl_pgrsUpdate(data))
       res = CURLE_ABORTED_BY_CALLBACK;
   }
-  now = tvnow();
-  if(pgrsUpdate(data))
+  now = Curl_tvnow();
+  if(Curl_pgrsUpdate(data))
     res = CURLE_ABORTED_BY_CALLBACK;
 
   close(fd);

lib/formdata.c

@@ -91,16 +91,10 @@ static void GetStr(char **string,
  *
  ***************************************************************************/
 
-int curl_formparse(char *input,
-                   struct HttpPost **httppost,
-                   struct HttpPost **last_post)
-{
-  return FormParse(input, httppost, last_post);
-}
-
 #define FORM_FILE_SEPARATOR ','
 #define FORM_TYPE_SEPARATOR ';'
 
+static
 int FormParse(char *input,
 	      struct HttpPost **httppost,
 	      struct HttpPost **last_post)
@@ -298,6 +292,13 @@ int FormParse(char *input,
   return 0;
 }
 
+int curl_formparse(char *input,
+                   struct HttpPost **httppost,
+                   struct HttpPost **last_post)
+{
+  return FormParse(input, httppost, last_post);
+}
+
 static int AddFormData(struct FormData **formp,
 			void *line,
 			long length)
@@ -339,7 +340,7 @@ static int AddFormDataf(struct FormData **formp,
 }
 
 
-char *MakeFormBoundary(void)
+char *Curl_FormBoundary(void)
 {
   char *retstring;
   static int randomizer=0; /* this is just so that two boundaries within
@@ -367,7 +368,7 @@ char *MakeFormBoundary(void)
 }
 
 /* Used from http.c */ 
-void FormFree(struct FormData *form)
+void Curl_FormFree(struct FormData *form)
 {
   struct FormData *next;
   do {
@@ -400,7 +401,7 @@ void curl_formfree(struct HttpPost *form)
   } while((form=next)); /* continue */
 }
 
-struct FormData *getFormData(struct HttpPost *post,
+struct FormData *Curl_getFormData(struct HttpPost *post,
                                   int *sizep)
 {
   struct FormData *form = NULL;
@@ -415,7 +416,7 @@ struct FormData *getFormData(struct HttpPost *post,
   if(!post)
     return NULL; /* no input => no output! */
 
-  boundary = MakeFormBoundary();
+  boundary = Curl_FormBoundary();
   
   /* Make the first line of the output */
   AddFormDataf(&form,
@@ -439,7 +440,7 @@ struct FormData *getFormData(struct HttpPost *post,
       /* If used, this is a link to more file names, we must then do
          the magic to include several files with the same field name */
 
-      fileboundary = MakeFormBoundary();
+      fileboundary = Curl_FormBoundary();
 
       size += AddFormDataf(&form,
 			   "\r\nContent-Type: multipart/mixed,"
@@ -535,24 +536,11 @@ struct FormData *getFormData(struct HttpPost *post,
   return firstform;
 }
 
-int FormInit(struct Form *form, struct FormData *formdata )
+int Curl_FormInit(struct Form *form, struct FormData *formdata )
 {
   if(!formdata)
     return 1; /* error */
 
-#if 0  
-  struct FormData *lastnode=formdata;
-
-  /* find the last node in the list */
-  while(lastnode->next) {
-    lastnode = lastnode->next;
-  }
-
-  /* Now, make sure that we'll send a nice terminating sequence at the end
-   * of the post. We *DONT* add this string to the size of the data since this
-   * is actually AFTER the data. */
-  AddFormDataf(&lastnode, "\r\n\r\n");
-#endif
   form->data = formdata;
   form->sent = 0;
 
@@ -560,7 +548,7 @@ int FormInit(struct Form *form, struct FormData *formdata )
 }
 
 /* fread() emulation */
-int FormReader(char *buffer,
+int Curl_FormReader(char *buffer,
                     size_t size,
                     size_t nitems,
                     FILE *mydata)
@@ -638,7 +626,7 @@ int main(int argc, char **argv)
     }
   }
 
-  form=getFormData(httppost, &size);
+  form=Curl_getFormData(httppost, &size);
 
   FormInit(&formread, form);
 

lib/formdata.h

@@ -36,23 +36,19 @@ struct Form {
 	       been sent in a previous invoke */
 };
 
-int FormParse(char *string,
-	      struct HttpPost **httppost,
-	      struct HttpPost **last_post);
+int Curl_FormInit(struct Form *form, struct FormData *formdata );
 
-int FormInit(struct Form *form, struct FormData *formdata );
-
-struct FormData *getFormData(struct HttpPost *post,
+struct FormData *Curl_getFormData(struct HttpPost *post,
                                   int *size);
 
 /* fread() emulation */
-int FormReader(char *buffer,
+int Curl_FormReader(char *buffer,
                     size_t size,
                     size_t nitems,
                     FILE *mydata);
 
-char *MakeFormBoundary(void);
+char *Curl_FormBoundary(void);
 
-void FormFree(struct FormData *);
+void Curl_FormFree(struct FormData *);
 
 #endif

lib/ftp.c

@@ -26,6 +26,7 @@
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
+#include <stdarg.h>
 #include <ctype.h>
 #include <errno.h>
 
@@ -66,18 +67,27 @@
 #include "if2ip.h"
 #include "hostip.h"
 #include "progress.h"
-#include "download.h"
+#include "transfer.h"
 #include "escape.h"
 #include "http.h" /* for HTTP proxy tunnel stuff */
+#include "ftp.h"
 
 #ifdef KRB4
 #include "security.h"
+#include "krb4.h"
 #endif
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
 /* The last #include file should be: */
 #ifdef MALLOCDEBUG
 #include "memdebug.h"
 #endif
 
+/* easy-to-use macro: */
+#define ftpsendf Curl_ftpsendf
+
 /* returns last node in linked list */
 static struct curl_slist *slist_get_last(struct curl_slist *list)
 {
@@ -202,12 +212,16 @@ static CURLcode AllowServerConnect(struct UrlData *data,
 #define lastline(line) (isdigit((int)line[0]) && isdigit((int)line[1]) && \
 			isdigit((int)line[2]) && (' ' == line[3]))
 
-int GetLastResponse(int sockfd, char *buf,
+/*
+ * We allow the ftpcode pointer to be NULL if no reply integer is wanted
+ */
+
+int Curl_GetFTPResponse(int sockfd, char *buf,
                         struct connectdata *conn,
                         int *ftpcode)
 {
   int nread;
-  int keepon=TRUE;
+  size_t keepon=TRUE;
   char *ptr;
   int timeout = 3600; /* in seconds */
   struct timeval interval;
@@ -220,12 +234,13 @@ int GetLastResponse(int sockfd, char *buf,
 #define SELECT_TIMEOUT 2
   int error = SELECT_OK;
 
+  if(ftpcode)
     *ftpcode=0; /* 0 for errors */
 
   if(data->timeout) {
     /* if timeout is requested, find out how much remaining time we have */
     timeout = data->timeout - /* timeout time */
-      (tvlong(tvnow()) - tvlong(conn->now)); /* spent time */
+      (Curl_tvlong(Curl_tvnow()) - Curl_tvlong(conn->now)); /* spent time */
     if(timeout <=0 ) {
       failf(data, "Transfer aborted due to timeout");
       return -SELECT_TIMEOUT; /* already too little time */
@@ -257,22 +272,17 @@ int GetLastResponse(int sockfd, char *buf,
         break;
       case 0: /* timeout */
         error = SELECT_TIMEOUT;
-        infof(data, "Transfer aborted due to timeout\n");
         failf(data, "Transfer aborted due to timeout");
         break;
       default:
-#ifdef USE_SSLEAY
-        if (data->ssl.use) {
-          keepon = SSL_read(data->ssl.handle, ptr, 1);
-        }
-        else {
-#endif
-          keepon = sread(sockfd, ptr, 1);
-#ifdef USE_SSLEAY
-        }
-#endif /* USE_SSLEAY */
-
-        if ((*ptr == '\n') || (*ptr == '\r'))
+        /*
+         * This code previously didn't use the kerberos sec_read() code
+         * to read, but when we use Curl_read() it may do so. Do confirm
+         * that this is still ok and then remove this comment!
+         */
+        if(CURLE_OK != Curl_read(conn, sockfd, ptr, 1, &keepon))
+          keepon = FALSE;
+        else if ((*ptr == '\n') || (*ptr == '\r'))
           keepon = FALSE;
       }
       if(keepon) {
@@ -306,13 +316,14 @@ int GetLastResponse(int sockfd, char *buf,
   if(error)
     return -error;
 
+  if(ftpcode)
     *ftpcode=atoi(buf); /* return the initial number like this */
 
   return nread;
 }
 
 /* -- who are we? -- */
-char *getmyhost(char *buf, int buf_size)
+char *Curl_getmyhost(char *buf, int buf_size)
 {
 #if defined(HAVE_GETHOSTNAME)
   gethostname(buf, buf_size);
@@ -330,7 +341,7 @@ char *getmyhost(char *buf, int buf_size)
 
 /* ftp_connect() should do everything that is to be considered a part
    of the connection phase. */
-CURLcode ftp_connect(struct connectdata *conn)
+CURLcode Curl_ftp_connect(struct connectdata *conn)
 {
   /* this is FTP and no proxy */
   int nread;
@@ -356,14 +367,14 @@ CURLcode ftp_connect(struct connectdata *conn)
 
   if (data->bits.tunnel_thru_httpproxy) {
     /* We want "seamless" FTP operations through HTTP proxy tunnel */
-    result = GetHTTPProxyTunnel(data, data->firstsocket,
+    result = Curl_ConnectHTTPProxyTunnel(conn, data->firstsocket,
                                          data->hostname, data->remote_port);
     if(CURLE_OK != result)
       return result;
   }
 
   /* The first thing we do is wait for the "220*" line: */
-  nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+  nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
   if(nread < 0)
     return CURLE_OPERATION_TIMEOUTED;
 
@@ -396,7 +407,7 @@ CURLcode ftp_connect(struct connectdata *conn)
   ftpsendf(data->firstsocket, conn, "USER %s", ftp->user);
 
   /* wait for feedback */
-  nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+  nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
   if(nread < 0)
     return CURLE_OPERATION_TIMEOUTED;
 
@@ -410,7 +421,7 @@ CURLcode ftp_connect(struct connectdata *conn)
     /* 331 Password required for ...
        (the server requires to send the user's password too) */
     ftpsendf(data->firstsocket, conn, "PASS %s", ftp->passwd);
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -459,7 +470,7 @@ CURLcode ftp_connect(struct connectdata *conn)
 
 
 /* argument is already checked for validity */
-CURLcode ftp_done(struct connectdata *conn)
+CURLcode Curl_ftp_done(struct connectdata *conn)
 {
   struct UrlData *data = conn->data;
   struct FTP *ftp = data->proto.ftp;
@@ -496,7 +507,7 @@ CURLcode ftp_done(struct connectdata *conn)
   if(!data->bits.no_body) {  
     /* now let's see what the server says about the transfer we
        just performed: */
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -516,7 +527,7 @@ CURLcode ftp_done(struct connectdata *conn)
       if (qitem->data) {
         ftpsendf(data->firstsocket, conn, "%s", qitem->data);
 
-        nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+        nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
         if(nread < 0)
           return CURLE_OPERATION_TIMEOUTED;
 
@@ -570,7 +581,7 @@ CURLcode _ftp(struct connectdata *conn)
       if (qitem->data) {
         ftpsendf(data->firstsocket, conn, "%s", qitem->data);
 
-        nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+        nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
         if(nread < 0)
           return CURLE_OPERATION_TIMEOUTED;
 
@@ -587,7 +598,7 @@ CURLcode _ftp(struct connectdata *conn)
   /* change directory first! */
   if(ftp->dir && ftp->dir[0]) {
     ftpsendf(data->firstsocket, conn, "CWD %s", ftp->dir);
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -602,7 +613,7 @@ CURLcode _ftp(struct connectdata *conn)
        again a grey area as the MDTM is not kosher RFC959 */
     ftpsendf(data->firstsocket, conn, "MDTM %s", ftp->file);
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -639,7 +650,7 @@ CURLcode _ftp(struct connectdata *conn)
     ftpsendf(data->firstsocket, conn, "TYPE %s",
              (data->bits.ftp_ascii)?"A":"I");
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -652,7 +663,7 @@ CURLcode _ftp(struct connectdata *conn)
 
     ftpsendf(data->firstsocket, conn, "SIZE %s", ftp->file);
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -664,7 +675,7 @@ CURLcode _ftp(struct connectdata *conn)
     filesize = atoi(buf+4);
 
     sprintf(buf, "Content-Length: %d\r\n", filesize);
-    result = client_write(data, CLIENTWRITE_BOTH, buf, 0);
+    result = Curl_client_write(data, CLIENTWRITE_BOTH, buf, 0);
     if(result)
       return result;
 
@@ -680,7 +691,7 @@ CURLcode _ftp(struct connectdata *conn)
       /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */
       strftime(buf, BUFSIZE-1, "Last-Modified: %a, %d %b %Y %H:%M:%S %Z\r\n",
                tm);
-      result = client_write(data, CLIENTWRITE_BOTH, buf, 0);
+      result = Curl_client_write(data, CLIENTWRITE_BOTH, buf, 0);
       if(result)
         return result;
     }
@@ -699,18 +710,20 @@ CURLcode _ftp(struct connectdata *conn)
     char myhost[256] = "";
 
     if(data->ftpport) {
-      if(if2ip(data->ftpport, myhost, sizeof(myhost))) {
-        h = GetHost(data, myhost, &hostdataptr);
+      if(Curl_if2ip(data->ftpport, myhost, sizeof(myhost))) {
+        h = Curl_gethost(data, myhost, &hostdataptr);
       }
       else {
         if(strlen(data->ftpport)>1)
-          h = GetHost(data, data->ftpport, &hostdataptr);
+          h = Curl_gethost(data, data->ftpport, &hostdataptr);
         if(h)
           strcpy(myhost, data->ftpport); /* buffer overflow risk */
       }
     }
     if(! *myhost) {
-      h=GetHost(data, getmyhost(myhost, sizeof(myhost)), &hostdataptr);
+      h=Curl_gethost(data,
+                     Curl_getmyhost(myhost, sizeof(myhost)),
+                     &hostdataptr);
     }
     infof(data, "We connect from %s\n", myhost);
 
@@ -788,7 +801,7 @@ CURLcode _ftp(struct connectdata *conn)
             porttouse & 255);
     }
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -801,7 +814,7 @@ CURLcode _ftp(struct connectdata *conn)
 
     ftpsendf(data->firstsocket, conn, "PASV");
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -856,7 +869,7 @@ CURLcode _ftp(struct connectdata *conn)
       }
       else {
         /* normal, direct, ftp connection */
-        he = GetHost(data, newhost, &hostdataptr);
+        he = Curl_gethost(data, newhost, &hostdataptr);
         if(!he) {
           failf(data, "Can't resolve new host %s", newhost);
           return CURLE_FTP_CANT_GET_HOST;
@@ -961,7 +974,7 @@ CURLcode _ftp(struct connectdata *conn)
 
       if (data->bits.tunnel_thru_httpproxy) {
         /* We want "seamless" FTP operations through HTTP proxy tunnel */
-        result = GetHTTPProxyTunnel(data, data->secondarysocket,
+        result = Curl_ConnectHTTPProxyTunnel(conn, data->secondarysocket,
                                              newhost, newport);
         if(CURLE_OK != result)
           return result;
@@ -977,7 +990,7 @@ CURLcode _ftp(struct connectdata *conn)
     ftpsendf(data->firstsocket, conn, "TYPE %s",
           (data->bits.ftp_ascii)?"A":"I");
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -1008,7 +1021,7 @@ CURLcode _ftp(struct connectdata *conn)
 
         ftpsendf(data->firstsocket, conn, "SIZE %s", ftp->file);
 
-        nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+        nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
         if(nread < 0)
           return CURLE_OPERATION_TIMEOUTED;
 
@@ -1069,7 +1082,7 @@ CURLcode _ftp(struct connectdata *conn)
     else
       ftpsendf(data->firstsocket, conn, "STOR %s", ftp->file);
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -1090,9 +1103,9 @@ CURLcode _ftp(struct connectdata *conn)
     /* When we know we're uploading a specified file, we can get the file
        size prior to the actual upload. */
 
-    pgrsSetUploadSize(data, data->infilesize);
+    Curl_pgrsSetUploadSize(data, data->infilesize);
 
-    result = Transfer(conn, -1, -1, FALSE, NULL, /* no download */
+    result = Curl_Transfer(conn, -1, -1, FALSE, NULL, /* no download */
                       data->secondarysocket, bytecountp);
     if(result)
       return result;
@@ -1149,7 +1162,7 @@ CURLcode _ftp(struct connectdata *conn)
       /* Set type to ASCII */
       ftpsendf(data->firstsocket, conn, "TYPE A");
 	
-      nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+      nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
       if(nread < 0)
         return CURLE_OPERATION_TIMEOUTED;
 	
@@ -1171,7 +1184,7 @@ CURLcode _ftp(struct connectdata *conn)
       ftpsendf(data->firstsocket, conn, "TYPE %s",
                (data->bits.ftp_ascii)?"A":"I");
 
-      nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+      nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
       if(nread < 0)
         return CURLE_OPERATION_TIMEOUTED;
 
@@ -1192,7 +1205,7 @@ CURLcode _ftp(struct connectdata *conn)
 
         ftpsendf(data->firstsocket, conn, "SIZE %s", ftp->file);
 
-        nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+        nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
         if(nread < 0)
           return CURLE_OPERATION_TIMEOUTED;
 
@@ -1236,7 +1249,7 @@ CURLcode _ftp(struct connectdata *conn)
 
         ftpsendf(data->firstsocket, conn, "REST %d", data->resume_from);
 
-        nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+        nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
         if(nread < 0)
           return CURLE_OPERATION_TIMEOUTED;
 
@@ -1249,7 +1262,7 @@ CURLcode _ftp(struct connectdata *conn)
       ftpsendf(data->firstsocket, conn, "RETR %s", ftp->file);
     }
 
-    nread = GetLastResponse(data->firstsocket, buf, conn, &ftpcode);
+    nread = Curl_GetFTPResponse(data->firstsocket, buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
@@ -1321,7 +1334,7 @@ CURLcode _ftp(struct connectdata *conn)
       infof(data, "Getting file with size: %d\n", size);
 
       /* FTP download: */
-      result=Transfer(conn, data->secondarysocket, size, FALSE,
+      result=Curl_Transfer(conn, data->secondarysocket, size, FALSE,
                       bytecountp,
                       -1, NULL); /* no upload here */
       if(result)
@@ -1341,7 +1354,7 @@ CURLcode _ftp(struct connectdata *conn)
 /* -- deal with the ftp server!  -- */
 
 /* argument is already checked for validity */
-CURLcode ftp(struct connectdata *conn)
+CURLcode Curl_ftp(struct connectdata *conn)
 {
   CURLcode retcode;
 
@@ -1403,3 +1416,39 @@ CURLcode ftp(struct connectdata *conn)
   return retcode;
 }
 
+/*
+ * ftpsendf() sends the formated string as a ftp command to a ftp server
+ *
+ * NOTE: we build the command in a fixed-length buffer, which sets length
+ * restrictions on the command!
+ *
+ */
+size_t Curl_ftpsendf(int fd, struct connectdata *conn, char *fmt, ...)
+{
+  size_t bytes_written;
+  char s[256];
+
+  va_list ap;
+  va_start(ap, fmt);
+  vsnprintf(s, 250, fmt, ap);
+  va_end(ap);
+
+  if(conn->data->bits.verbose)
+    fprintf(conn->data->err, "> %s\n", s);
+
+  strcat(s, "\r\n"); /* append a trailing CRLF */
+
+#ifdef KRB4
+  if(conn->sec_complete && conn->data->cmdchannel) {
+    bytes_written = sec_fprintf(conn, conn->data->cmdchannel, s);
+    fflush(conn->data->cmdchannel);
+  }
+  else
+#endif /* KRB4 */
+    {
+      bytes_written = swrite(fd, s, strlen(s));
+    }
+  return(bytes_written);
+}
+
+

lib/ftp.h

@@ -23,11 +23,18 @@
  *
  * $Id$
  *****************************************************************************/
-CURLcode ftp(struct connectdata *conn);
-CURLcode ftp_done(struct connectdata *conn);
-CURLcode ftp_connect(struct connectdata *conn);
+CURLcode Curl_ftp(struct connectdata *conn);
+CURLcode Curl_ftp_done(struct connectdata *conn);
+CURLcode Curl_ftp_connect(struct connectdata *conn);
+
+size_t Curl_ftpsendf(int fd, struct connectdata *, char *fmt, ...);
 
 struct curl_slist *curl_slist_append(struct curl_slist *list, char *data);
 void curl_slist_free_all(struct curl_slist *list);
 
+/* The kerberos stuff needs this: */
+int Curl_GetFTPResponse(int sockfd, char *buf,
+                        struct connectdata *conn,
+                        int *ftpcode);
+
 #endif

lib/getenv.c

@@ -33,6 +33,7 @@
 #include "memdebug.h"
 #endif
 
+static
 char *GetEnv(char *variable)
 {
 #ifdef WIN32
@@ -40,12 +41,13 @@ char *GetEnv(char *variable)
   char env[MAX_PATH]; /* MAX_PATH is from windef.h */
   char *temp = getenv(variable);
   env[0] = '\0';
+  if (temp != NULL)
     ExpandEnvironmentStrings(temp, env, sizeof(env));
 #else
   /* no length control */
   char *env = getenv(variable);
 #endif
-  return env?strdup(env):NULL;
+  return (env && env[0])?strdup(env):NULL;
 }
 
 char *curl_getenv(char *v)

lib/getenv.h

@@ -23,7 +23,6 @@
  * $Id$
  *****************************************************************************/
 
-/* Unix and Win32 getenv function call */
-char *GetEnv(char *variable);
+#include <curl/curl.h>
 
 #endif

lib/getpass.h

@@ -1,8 +1,35 @@
 #ifndef __GETPASS_H
 #define __GETPASS_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * In order to be useful for every potential user, curl and libcurl are
+ * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the MPL or the MIT/X-derivate
+ * licenses. You may pick one of these licenses.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ *****************************************************************************/
+#ifndef HAVE_GETPASS_R
+/* If there's a system-provided function named like this, we trust it is
+   also found in one of the standard headers. */
+
 /*
  * Returning NULL will abort the continued operation!
  */
 char* getpass_r(char *prompt, char* buffer, size_t buflen );
+#endif
 
 #endif

lib/hostip.c

@@ -62,7 +62,7 @@
 
 /* --- resolve name or IP-number --- */
 
-char *MakeIP(unsigned long num,char *addr, int addr_len)
+static char *MakeIP(unsigned long num,char *addr, int addr_len)
 {
 #if defined(HAVE_INET_NTOA) || defined(HAVE_INET_NTOA_R)
   struct in_addr in;
@@ -83,12 +83,15 @@ char *MakeIP(unsigned long num,char *addr, int addr_len)
   return (addr);
 }
 
-/* The original code to this function was stolen from the Dancer source code,
-   written by Bjorn Reese, it has since been patched and modified. */
+/* The original code to this function was once stolen from the Dancer source
+   code, written by Bjorn Reese, it has since been patched and modified
+   considerably. */
+
 #ifndef INADDR_NONE
 #define INADDR_NONE (unsigned long) ~0
 #endif
-struct hostent *GetHost(struct UrlData *data,
+
+struct hostent *Curl_gethost(struct UrlData *data,
                              char *hostname,
                              char **bufp)
 {

lib/hostip.h

@@ -23,6 +23,8 @@
  * $Id$
  *****************************************************************************/
 
-struct hostent *GetHost(struct UrlData *data, char *hostname, char **bufp );
+struct hostent *Curl_gethost(struct UrlData *data,
+                             char *hostname,
+                             char **bufp);
 
 #endif

lib/http.c

@@ -87,14 +87,13 @@
 
 #include "urldata.h"
 #include <curl/curl.h>
-#include "download.h"
+#include "transfer.h"
 #include "sendf.h"
 #include "formdata.h"
 #include "progress.h"
 #include "base64.h"
 #include "cookie.h"
 #include "strequal.h"
-#include "url.h"
 #include "ssluse.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
@@ -105,6 +104,143 @@
 #include "memdebug.h"
 #endif
 
+/*
+ * The add_buffer series of functions are used to build one large memory chunk
+ * from repeated function invokes. Used so that the entire HTTP request can
+ * be sent in one go.
+ */
+static CURLcode
+ add_buffer(send_buffer *in, void *inptr, size_t size);
+
+/*
+ * add_buffer_init() returns a fine buffer struct
+ */
+static
+send_buffer *add_buffer_init(void)
+{
+  send_buffer *blonk;
+  blonk=(send_buffer *)malloc(sizeof(send_buffer));
+  if(blonk) {
+    memset(blonk, 0, sizeof(send_buffer));
+    return blonk;
+  }
+  return NULL; /* failed, go home */
+}
+
+/*
+ * add_buffer_send() sends a buffer and frees all associated memory.
+ */
+static
+size_t add_buffer_send(int sockfd, struct connectdata *conn, send_buffer *in)
+{
+  size_t amount;
+  if(conn->data->bits.verbose) {
+    fputs("> ", conn->data->err);
+    /* this data _may_ contain binary stuff */
+    fwrite(in->buffer, in->size_used, 1, conn->data->err);
+  }
+
+  Curl_write(conn, sockfd, in->buffer, in->size_used, &amount);
+
+  if(in->buffer)
+    free(in->buffer);
+  free(in);
+
+  return amount;
+}
+
+
+/* 
+ * add_bufferf() builds a buffer from the formatted input
+ */
+static
+CURLcode add_bufferf(send_buffer *in, char *fmt, ...)
+{
+  CURLcode result = CURLE_OUT_OF_MEMORY;
+  char *s;
+  va_list ap;
+  va_start(ap, fmt);
+  s = vaprintf(fmt, ap); /* this allocs a new string to append */
+  va_end(ap);
+
+  if(s) {
+    result = add_buffer(in, s, strlen(s));
+    free(s);
+  }
+  return result;
+}
+
+/*
+ * add_buffer() appends a memory chunk to the existing one
+ */
+static
+CURLcode add_buffer(send_buffer *in, void *inptr, size_t size)
+{
+  char *new_rb;
+  int new_size;
+
+  if(size > 0) {
+    if(!in->buffer ||
+       ((in->size_used + size) > (in->size_max - 1))) {
+      new_size = (in->size_used+size)*2;
+      if(in->buffer)
+        /* we have a buffer, enlarge the existing one */
+        new_rb = (char *)realloc(in->buffer, new_size);
+      else
+        /* create a new buffer */
+        new_rb = (char *)malloc(new_size);
+
+      if(!new_rb)
+        return CURLE_OUT_OF_MEMORY;
+
+      in->buffer = new_rb;
+      in->size_max = new_size;
+    }
+    memcpy(&in->buffer[in->size_used], inptr, size);
+      
+    in->size_used += size;
+  }
+
+  return CURLE_OK;
+}
+
+/* end of the add_buffer functions */
+/*****************************************************************************/
+
+/*
+ * Read everything until a newline.
+ */
+
+static
+int GetLine(int sockfd, char *buf, struct connectdata *conn)
+{
+  size_t nread;
+  int read_rc=1;
+  char *ptr;
+  struct UrlData *data=conn->data;
+
+  ptr=buf;
+
+  /* get us a full line, terminated with a newline */
+  for(nread=0;
+      (nread<BUFSIZE) && read_rc;
+      nread++, ptr++) {
+    if((CURLE_OK != Curl_read(conn, sockfd, ptr, 1, &nread)) ||
+       (*ptr == '\n'))
+      break;
+  }
+  *ptr=0; /* zero terminate */
+
+  if(data->bits.verbose) {
+    fputs("< ", data->err);
+    fwrite(buf, 1, nread, data->err);
+    fputs("\n", data->err);
+  }
+  return nread;
+}
+
+
+
 /*
  * This function checks the linked list of custom HTTP headers for a particular
  * header (prefix).
@@ -123,21 +259,23 @@ bool static checkheaders(struct UrlData *data, char *thisheader)
 }
 
 /*
- * GetHTTPProxyTunnel() requires that we're connected to a HTTP proxy. This
+ * ConnectHTTPProxyTunnel() requires that we're connected to a HTTP proxy. This
  * function will issue the necessary commands to get a seamless tunnel through
  * this proxy. After that, the socket can be used just as a normal socket.
  */
 
-CURLcode GetHTTPProxyTunnel(struct UrlData *data, int tunnelsocket,
+CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
+                                     int tunnelsocket,
                                      char *hostname, int remote_port)
 {
   int httperror=0;
   int subversion=0;
+  struct UrlData *data=conn->data;
 
   infof(data, "Establish HTTP proxy tunnel to %s:%d\n", hostname, remote_port);
 
-  /* OK, now send the connect statment */
-  sendf(tunnelsocket, data,
+  /* OK, now send the connect request to the proxy */
+  Curl_sendf(tunnelsocket, conn,
              "CONNECT %s:%d HTTP/1.0\015\012"
              "%s"
              "%s"
@@ -148,7 +286,7 @@ CURLcode GetHTTPProxyTunnel(struct UrlData *data, int tunnelsocket,
              );
 
   /* wait for the proxy to send us a HTTP/1.0 200 OK header */
-  while(GetLine(tunnelsocket, data->buffer, data)) {
+  while(GetLine(tunnelsocket, data->buffer, conn)) {
     if('\r' == data->buffer[0])
       break; /* end of headers */
     if(2 == sscanf(data->buffer, "HTTP/1.%d %d",
@@ -170,7 +308,7 @@ CURLcode GetHTTPProxyTunnel(struct UrlData *data, int tunnelsocket,
   return CURLE_OK;
 }
 
-CURLcode http_connect(struct connectdata *conn)
+CURLcode Curl_http_connect(struct connectdata *conn)
 {
   struct UrlData *data;
   CURLcode result;
@@ -186,17 +324,16 @@ CURLcode http_connect(struct connectdata *conn)
   if (conn->protocol & PROT_HTTPS) {
     if (data->bits.httpproxy) {
       /* HTTPS through a proxy can only be done with a tunnel */
-      result = GetHTTPProxyTunnel(data, data->firstsocket,
+      result = Curl_ConnectHTTPProxyTunnel(conn, data->firstsocket,
                                            data->hostname, data->remote_port);
       if(CURLE_OK != result)
         return result;
     }
 
     /* now, perform the SSL initialization for this socket */
-    if(UrgSSLConnect (data)) {
+    if(Curl_SSLConnect(data))
       return CURLE_SSL_CONNECT_ERROR;
   }
-  }
 
   if(data->bits.user_passwd && !data->bits.this_is_a_follow) {
     /* Authorization: is requested, this is not a followed location, get the
@@ -209,14 +346,14 @@ CURLcode http_connect(struct connectdata *conn)
 
 /* called from curl_close() when this struct is about to get wasted, free
    protocol-specific resources */
-CURLcode http_close(struct connectdata *conn)
+CURLcode Curl_http_close(struct connectdata *conn)
 {
   if(conn->data->auth_host)
     free(conn->data->auth_host);
   return CURLE_OK;
 }
 
-CURLcode http_done(struct connectdata *conn)
+CURLcode Curl_http_done(struct connectdata *conn)
 {
   struct UrlData *data;
   long *bytecount = &conn->bytecount;
@@ -228,7 +365,7 @@ CURLcode http_done(struct connectdata *conn)
   if(data->bits.http_formpost) {
     *bytecount = http->readbytecount + http->writebytecount;
       
-    FormFree(http->sendit); /* Now free that whole lot */
+    Curl_FormFree(http->sendit); /* Now free that whole lot */
 
     data->fread = http->storefread; /* restore */
     data->in = http->in; /* restore */
@@ -244,7 +381,7 @@ CURLcode http_done(struct connectdata *conn)
 }
 
 
-CURLcode http(struct connectdata *conn)
+CURLcode Curl_http(struct connectdata *conn)
 {
   struct UrlData *data=conn->data;
   char *buf = data->buffer; /* this is a short cut to the buffer */
@@ -284,26 +421,26 @@ CURLcode http(struct connectdata *conn)
        !data->auth_host ||
        strequal(data->auth_host, data->hostname)) {
       sprintf(data->buffer, "%s:%s", data->user, data->passwd);
-      if(base64_encode(data->buffer, strlen(data->buffer),
+      if(Curl_base64_encode(data->buffer, strlen(data->buffer),
                             &authorization) >= 0) {
-        data->ptr_userpwd = maprintf( "Authorization: Basic %s\015\012",
+        data->ptr_userpwd = aprintf( "Authorization: Basic %s\015\012",
                                      authorization);
         free(authorization);
       }
     }
   }
   if((data->bits.set_range) && !checkheaders(data, "Range:")) {
-    data->ptr_rangeline = maprintf("Range: bytes=%s\015\012", data->range);
+    data->ptr_rangeline = aprintf("Range: bytes=%s\015\012", data->range);
   }
   if((data->bits.http_set_referer) && !checkheaders(data, "Referer:")) {
-    data->ptr_ref = maprintf("Referer: %s\015\012", data->referer);
+    data->ptr_ref = aprintf("Referer: %s\015\012", data->referer);
   }
   if(data->cookie && !checkheaders(data, "Cookie:")) {
-    data->ptr_cookie = maprintf("Cookie: %s\015\012", data->cookie);
+    data->ptr_cookie = aprintf("Cookie: %s\015\012", data->cookie);
   }
 
   if(data->cookies) {
-    co = cookie_getlist(data->cookies,
+    co = Curl_cookie_getlist(data->cookies,
                              host,
                              ppath,
                              conn->protocol&PROT_HTTPS?TRUE:FALSE);
@@ -315,7 +452,7 @@ CURLcode http(struct connectdata *conn)
   if(data->bits.http_formpost) {
     /* we must build the whole darned post sequence first, so that we have
        a size of the whole shebang before we start to send it */
-    http->sendit = getFormData(data->httppost, &http->postsize);
+    http->sendit = Curl_getFormData(data->httppost, &http->postsize);
   }
 
   if(!checkheaders(data, "Host:")) {
@@ -323,9 +460,9 @@ CURLcode http(struct connectdata *conn)
        (!(conn->protocol&PROT_HTTPS) && (data->remote_port == PORT_HTTP)) )
       /* If (HTTPS on port 443) OR (non-HTTPS on port 80) then don't include
          the port number in the host string */
-      data->ptr_host = maprintf("Host: %s\r\n", host);
+      data->ptr_host = aprintf("Host: %s\r\n", host);
     else
-      data->ptr_host = maprintf("Host: %s:%d\r\n", host, data->remote_port);
+      data->ptr_host = aprintf("Host: %s:%d\r\n", host, data->remote_port);
   }
 
   if(!checkheaders(data, "Pragma:"))
@@ -389,7 +526,7 @@ CURLcode http(struct connectdata *conn)
       if(count) {
         add_buffer(req_buffer, "\r\n", 2);
       }
-      cookie_freelist(store); /* free the cookie list */
+      Curl_cookie_freelist(store); /* free the cookie list */
       co=NULL;
     }
 
@@ -451,7 +588,7 @@ CURLcode http(struct connectdata *conn)
     }
 
     if(data->bits.http_formpost) {
-      if(FormInit(&http->form, http->sendit)) {
+      if(Curl_FormInit(&http->form, http->sendit)) {
         failf(data, "Internal HTTP POST error!\n");
         return CURLE_HTTP_POST_ERROR;
       }
@@ -461,7 +598,7 @@ CURLcode http(struct connectdata *conn)
           
       data->fread =
         (size_t (*)(char *, size_t, size_t, FILE *))
-        FormReader; /* set the read function to read from the
+        Curl_FormReader; /* set the read function to read from the
                             generated form data */
       data->in = (FILE *)&http->form;
 
@@ -469,16 +606,16 @@ CURLcode http(struct connectdata *conn)
                   "Content-Length: %d\r\n", http->postsize-2);
 
       /* set upload size to the progress meter */
-      pgrsSetUploadSize(data, http->postsize);
+      Curl_pgrsSetUploadSize(data, http->postsize);
 
       data->request_size = 
         add_buffer_send(data->firstsocket, conn, req_buffer);
-      result = Transfer(conn, data->firstsocket, -1, TRUE,
+      result = Curl_Transfer(conn, data->firstsocket, -1, TRUE,
                         &http->readbytecount,
                           data->firstsocket,
                         &http->writebytecount);
       if(result) {
-        FormFree(http->sendit); /* free that whole lot */
+        Curl_FormFree(http->sendit); /* free that whole lot */
         return result;
       }
     }
@@ -494,14 +631,14 @@ CURLcode http(struct connectdata *conn)
         add_bufferf(req_buffer, "\015\012");
 
       /* set the upload size to the progress meter */
-      pgrsSetUploadSize(data, data->infilesize);
+      Curl_pgrsSetUploadSize(data, data->infilesize);
 
       /* this sends the buffer and frees all the buffer resources */
       data->request_size = 
         add_buffer_send(data->firstsocket, conn, req_buffer);
 
       /* prepare for transfer */
-      result = Transfer(conn, data->firstsocket, -1, TRUE,
+      result = Curl_Transfer(conn, data->firstsocket, -1, TRUE,
                         &http->readbytecount,
                         data->firstsocket,
                         &http->writebytecount);
@@ -547,7 +684,7 @@ CURLcode http(struct connectdata *conn)
         add_buffer_send(data->firstsocket, conn, req_buffer);
 
       /* HTTP GET/HEAD download: */
-      result = Transfer(conn, data->firstsocket, -1, TRUE, bytecount,
+      result = Curl_Transfer(conn, data->firstsocket, -1, TRUE, bytecount,
                         -1, NULL); /* nothing to upload */
     }
     if(result)

lib/http.h

@@ -25,13 +25,14 @@
  *****************************************************************************/
 
 /* ftp can use this as well */
-CURLcode GetHTTPProxyTunnel(struct UrlData *data, int tunnelsocket,
+CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
+                                     int tunnelsocket,
                                      char *hostname, int remote_port);
 
 /* protocol-specific functions set up to be called by the main engine */
-CURLcode http(struct connectdata *conn);
-CURLcode http_done(struct connectdata *conn);
-CURLcode http_connect(struct connectdata *conn);
-CURLcode http_close(struct connectdata *conn);
+CURLcode Curl_http(struct connectdata *conn);
+CURLcode Curl_http_done(struct connectdata *conn);
+CURLcode Curl_http_connect(struct connectdata *conn);
+CURLcode Curl_http_close(struct connectdata *conn);
 
 #endif

lib/if2ip.c

@@ -32,7 +32,7 @@
 #include <unistd.h>
 #endif
 
-#if ! defined(WIN32) && ! defined(__BEOS__)
+#if ! defined(WIN32) && ! defined(__BEOS__) && !defined(__CYGWIN32__)
 
 #ifdef NEED_REENTRANT
 #define _REENTRANT
@@ -72,7 +72,7 @@
 
 #define SYS_ERROR -1
 
-char *if2ip(char *interface, char *buf, int buf_size)
+char *Curl_if2ip(char *interface, char *buf, int buf_size)
 {
   int dummy;
   char *ip=NULL;

lib/if2ip.h

@@ -25,9 +25,9 @@
 #include "setup.h"
 
 #if ! defined(WIN32) && ! defined(__BEOS__)
-extern char *if2ip(char *interface, char *buf, int buf_size);
+extern char *Curl_if2ip(char *interface, char *buf, int buf_size);
 #else
-#define if2ip(a,b,c) NULL
+#define Curl_if2ip(a,b,c) NULL
 #endif
 
 #endif

lib/krb4.c

@@ -47,6 +47,9 @@
 #include <string.h>
 #include <krb.h>
 
+#include "ftp.h"
+#include "sendf.h"
+
 /* The last #include file should be: */
 #ifdef MALLOCDEBUG
 #include "memdebug.h"
@@ -95,7 +98,8 @@ strlcpy (char *dst, const char *src, size_t dst_sz)
     else
 	return n + strlen (src);
 }
-
+#else
+size_t strlcpy (char *dst, const char *src, size_t dst_sz);
 #endif
 
 static int
@@ -279,12 +283,15 @@ krb4_auth(void *app_data, struct connectdata *conn)
     u_int32_t cs;
     struct krb4_data *d = app_data;
     struct sockaddr_in *localaddr  = (struct sockaddr_in *)LOCAL_ADDR;
+#if 0
     struct sockaddr_in *remoteaddr = (struct sockaddr_in *)REMOTE_ADDR;
+#endif
     char *host = conn->hp->h_name;
     size_t nread;
     int l = sizeof(local_addr);
 
-    if(getsockname(conn->data->firstsocket, LOCAL_ADDR, &l) < 0)
+    if(getsockname(conn->data->firstsocket,
+                   (struct sockaddr *)LOCAL_ADDR, &l) < 0)
 	perror("getsockname()");
 
     checksum = getpid();
@@ -308,7 +315,7 @@ krb4_auth(void *app_data, struct connectdata *conn)
       else {
 	if (natAddr.s_addr != localaddr->sin_addr.s_addr) {
 	  printf("Using NAT IP address (%s) for kerberos 4\n",
-		 inet_ntoa(natAddr));
+		 (char *)inet_ntoa(natAddr));
 	  localaddr->sin_addr = natAddr;
 	  
 	  /*
@@ -327,15 +334,15 @@ krb4_auth(void *app_data, struct connectdata *conn)
     /*printf("Local address is %s\n", inet_ntoa(localaddr->sin_addr));***/
     /*printf("Remote address is %s\n", inet_ntoa(remoteaddr->sin_addr));***/
 
-    if(base64_encode(adat.dat, adat.length, &p) < 0) {
+    if(Curl_base64_encode(adat.dat, adat.length, &p) < 0) {
 	printf("Out of memory base64-encoding.\n");
 	return AUTH_CONTINUE;
     }
     /*ret = command("ADAT %s", p)*/
-    ftpsendf(conn->data->firstsocket, conn, "ADAT %s", p);
+    Curl_ftpsendf(conn->data->firstsocket, conn, "ADAT %s", p);
     /* wait for feedback */
-    nread = GetLastResponse(conn->data->firstsocket,
-			    conn->data->buffer, conn);
+    nread = Curl_GetFTPResponse(conn->data->firstsocket,
+                                conn->data->buffer, conn, NULL);
     if(nread < 0)
 	return /*CURLE_OPERATION_TIMEOUTED*/-1;
     free(p);
@@ -351,7 +358,7 @@ krb4_auth(void *app_data, struct connectdata *conn)
 	return AUTH_ERROR;
     }
     p += 5;
-    len = base64_decode(p, adat.dat);
+    len = Curl_base64_decode(p, adat.dat);
     if(len < 0){
 	printf("Failed to decode base64 from server.\n");
 	return AUTH_ERROR;
@@ -389,14 +396,11 @@ struct sec_client_mech krb4_client_mech = {
 
 void krb_kauth(struct connectdata *conn)
 {
-    int ret;
-    char buf[1024];
     des_cblock key;
     des_key_schedule schedule;
     KTEXT_ST tkt, tktcopy;
     char *name;
     char *p;
-    int overbose;
     char passwd[100];
     int tmp;
     size_t nread;
@@ -405,20 +409,19 @@ void krb_kauth(struct connectdata *conn)
 
     save = set_command_prot(conn, prot_private);
     /*ret = command("SITE KAUTH %s", name);***/
-    ftpsendf(conn->data->firstsocket, conn,
+    Curl_ftpsendf(conn->data->firstsocket, conn,
              "SITE KAUTH %s", conn->data->user);
     /* wait for feedback */
-    nread = GetLastResponse(conn->data->firstsocket, conn->data->buffer, conn);
+    nread = Curl_GetFTPResponse(conn->data->firstsocket, conn->data->buffer,
+                                conn, NULL);
     if(nread < 0)
 	return /*CURLE_OPERATION_TIMEOUTED*/;
 
     if(/*ret != CONTINUE*/conn->data->buffer[0] != '3'){
-	/*verbose = overbose;***/
 	set_command_prot(conn, save);
 	/*code = -1;***/
 	return;
     }
-    /*verbose = overbose;***/
     p = strstr(/*reply_string***/conn->data->buffer, "T=");
     if(!p){
 	printf("Bad reply from server.\n");
@@ -427,7 +430,7 @@ void krb_kauth(struct connectdata *conn)
 	return;
     }
     p += 2;
-    tmp = base64_decode(p, &tkt.dat);
+    tmp = Curl_base64_decode(p, &tkt.dat);
     if(tmp < 0){
 	printf("Failed to decode base64 in reply.\n");
 	set_command_prot(conn, save);
@@ -440,7 +443,6 @@ void krb_kauth(struct connectdata *conn)
     p = strstr(/*reply_string***/conn->data->buffer, "P=");
     if(!p){
 	printf("Bad reply from server.\n");
-	/*verbose = overbose;***/
 	set_command_prot(conn, save);
 	/*code = -1;***/
 	return;
@@ -476,7 +478,7 @@ void krb_kauth(struct connectdata *conn)
     memset(key, 0, sizeof(key));
     memset(schedule, 0, sizeof(schedule));
     memset(passwd, 0, sizeof(passwd));
-    if(base64_encode(tktcopy.dat, tktcopy.length, &p) < 0) {
+    if(Curl_base64_encode(tktcopy.dat, tktcopy.length, &p) < 0) {
       failf(conn->data, "Out of memory base64-encoding.\n");
       set_command_prot(conn, save);
       /*code = -1;***/
@@ -484,10 +486,11 @@ void krb_kauth(struct connectdata *conn)
     }
     memset (tktcopy.dat, 0, tktcopy.length);
     /*ret = command("SITE KAUTH %s %s", name, p);***/
-    ftpsendf(conn->data->firstsocket, conn,
+    Curl_ftpsendf(conn->data->firstsocket, conn,
              "SITE KAUTH %s %s", name, p);
     /* wait for feedback */
-    nread = GetLastResponse(conn->data->firstsocket, conn->data->buffer, conn);
+    nread = Curl_GetFTPResponse(conn->data->firstsocket, conn->data->buffer,
+                                conn, NULL);
     if(nread < 0)
 	return /*CURLE_OPERATION_TIMEOUTED*/;
     free(p);

lib/krb4.h

@@ -1,5 +1,5 @@
-#ifndef __HIGHLEVEL_H
-#define __HIGHLEVEL_H
+#ifndef __KRB4_H
+#define __KRB4_H
 /*****************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
@@ -22,5 +22,6 @@
  *
  * $Id$
  *****************************************************************************/
-CURLcode curl_transfer(CURL *curl);
+void krb_kauth(struct connectdata *conn);
+
 #endif

lib/ldap.c

@@ -117,18 +117,18 @@ static void * DynaGetFunction(char *name)
 static int WriteProc(void *param, char *text, int len)
 {
   struct UrlData *data = (struct UrlData *)param;
-  client_write(data, CLIENTWRITE_BODY, text, 0);
+  Curl_client_write(data, CLIENTWRITE_BODY, text, 0);
   return 0;
 }
 
-CURLcode ldap_done(struct connectdata *conn)
+CURLcode Curl_ldap_done(struct connectdata *conn)
 {
   return CURLE_OK;
 }
 
 /***********************************************************************
  */
-CURLcode ldap(struct connectdata *conn)
+CURLcode Curl_ldap(struct connectdata *conn)
 {
   CURLcode status = CURLE_OK;
   int rc;

lib/ldap.h

@@ -23,7 +23,7 @@
  *
  * $Id$
  *****************************************************************************/
-CURLcode ldap(struct connectdata *conn);
-CURLcode ldap_done(struct connectdata *conn);
+CURLcode Curl_ldap(struct connectdata *conn);
+CURLcode Curl_ldap_done(struct connectdata *conn);
 
 #endif /* __LDAP_H */

lib/memdebug.c

@@ -135,7 +135,7 @@ int curl_sclose(int sockfd, int line, char *source)
   int res=sclose(sockfd);
   fprintf(logfile?logfile:stderr, "FD %s:%d sclose(%d)\n",
           source, line, sockfd);
-  return sockfd;
+  return res;
 }
 
 FILE *curl_fopen(char *file, char *mode, int line, char *source)

lib/mprintf.c

@@ -207,7 +207,7 @@ struct asprintf {
   size_t alloc; /* length of alloc */
 };
 
-int msprintf(char *buffer, const char *format, ...);
+int curl_msprintf(char *buffer, const char *format, ...);
 
 static int dprintf_DollarString(char *input, char **end)
 {
@@ -955,11 +955,11 @@ static int dprintf_formatf(
 
 	if(width >= 0) {
 	  /* RECURSIVE USAGE */
-	  fptr += msprintf(fptr, "%d", width);
+	  fptr += curl_msprintf(fptr, "%d", width);
 	}
 	if(prec >= 0) {
 	  /* RECURSIVE USAGE */
-	  fptr += msprintf(fptr, ".%d", prec);
+	  fptr += curl_msprintf(fptr, ".%d", prec);
 	}
 	if (p->flags & FLAGS_LONG)
 	  strcat(fptr, "l");
@@ -1025,7 +1025,7 @@ static int addbyter(int output, FILE *data)
   return -1;
 }
 
-int msnprintf(char *buffer, size_t maxlength, const char *format, ...)
+int curl_msnprintf(char *buffer, size_t maxlength, const char *format, ...)
 {
   va_list ap_save; /* argument pointer */
   int retcode;
@@ -1045,7 +1045,7 @@ int msnprintf(char *buffer, size_t maxlength, const char *format, ...)
   return retcode;
 }
 
-int mvsnprintf(char *buffer, size_t maxlength, const char *format, va_list ap_save)
+int curl_mvsnprintf(char *buffer, size_t maxlength, const char *format, va_list ap_save)
 {
   int retcode;
   struct nsprintf info;
@@ -1092,7 +1092,7 @@ static int alloc_addbyter(int output, FILE *data)
 
 }
 
-char *maprintf(const char *format, ...)
+char *curl_maprintf(const char *format, ...)
 {
   va_list ap_save; /* argument pointer */
   int retcode;
@@ -1113,7 +1113,7 @@ char *maprintf(const char *format, ...)
     return NULL;
 }
 
-char *mvaprintf(const char *format, va_list ap_save)
+char *curl_mvaprintf(const char *format, va_list ap_save)
 {
   int retcode;
   struct asprintf info;
@@ -1140,7 +1140,7 @@ static int storebuffer(int output, FILE *data)
   return output; /* act like fputc() ! */
 }
 
-int msprintf(char *buffer, const char *format, ...)
+int curl_msprintf(char *buffer, const char *format, ...)
 {
   va_list ap_save; /* argument pointer */
   int retcode;
@@ -1153,7 +1153,7 @@ int msprintf(char *buffer, const char *format, ...)
 
 extern int fputc(int, FILE *);
 
-int mprintf(const char *format, ...)
+int curl_mprintf(const char *format, ...)
 {
   int retcode;
   va_list ap_save; /* argument pointer */
@@ -1163,7 +1163,7 @@ int mprintf(const char *format, ...)
   return retcode;
 }
 
-int mfprintf(FILE *whereto, const char *format, ...)
+int curl_mfprintf(FILE *whereto, const char *format, ...)
 {
   int retcode;
   va_list ap_save; /* argument pointer */
@@ -1173,7 +1173,7 @@ int mfprintf(FILE *whereto, const char *format, ...)
   return retcode;
 }
 
-int mvsprintf(char *buffer, const char *format, va_list ap_save)
+int curl_mvsprintf(char *buffer, const char *format, va_list ap_save)
 {
   int retcode;
   retcode = dprintf_formatf(&buffer, storebuffer, format, ap_save);
@@ -1181,12 +1181,12 @@ int mvsprintf(char *buffer, const char *format, va_list ap_save)
   return retcode;
 }
 
-int mvprintf(const char *format, va_list ap_save)
+int curl_mvprintf(const char *format, va_list ap_save)
 {
   return dprintf_formatf(stdout, fputc, format, ap_save);
 }
 
-int mvfprintf(FILE *whereto, const char *format, va_list ap_save)
+int curl_mvfprintf(FILE *whereto, const char *format, va_list ap_save)
 {
   return dprintf_formatf(whereto, fputc, format, ap_save);
 }

lib/netrc.c

@@ -51,7 +51,7 @@ enum {
 #define LOGINSIZE 64
 #define PASSWORDSIZE 64
 
-int ParseNetrc(char *host,
+int Curl_parsenetrc(char *host,
                     char *login,
                     char *password)
 {
@@ -59,7 +59,7 @@ int ParseNetrc(char *host,
   char netrcbuffer[256];
   int retcode=1;
   
-  char *home = GetEnv("HOME"); /* portable environment reader */
+  char *home = curl_getenv("HOME"); /* portable environment reader */
   int state=NOTHING;
 
   char state_login=0;

lib/netrc.h

@@ -22,7 +22,7 @@
  *
  * $Id$
  *****************************************************************************/
-int ParseNetrc(char *host,
+int Curl_parsenetrc(char *host,
                     char *login,
                     char *password);
 #endif

lib/progress.c

@@ -45,7 +45,7 @@
 
 #include "progress.h"
 
-void time2str(char *r, int t)
+static void time2str(char *r, int t)
 {
   int h = (t/3600);
   int m = (t-(h*3600))/60;
@@ -55,7 +55,7 @@ void time2str(char *r, int t)
 
 /* The point of this function would be to return a string of the input data,
    but never longer than 5 columns. Add suffix k, M, G when suitable... */
-char *max5data(double bytes, char *max5)
+static char *max5data(double bytes, char *max5)
 {
 #define ONE_KILOBYTE 1024
 #define ONE_MEGABYTE (1024*1024)
@@ -91,16 +91,16 @@ char *max5data(double bytes, char *max5)
 
 */
 
-void pgrsDone(struct UrlData *data)
+void Curl_pgrsDone(struct UrlData *data)
 {
   if(!(data->progress.flags & PGRS_HIDE)) {
     data->progress.lastshow=0;
-    pgrsUpdate(data); /* the final (forced) update */
+    Curl_pgrsUpdate(data); /* the final (forced) update */
     fprintf(data->err, "\n");
   }
 }
 
-void pgrsTime(struct UrlData *data, timerid timer)
+void Curl_pgrsTime(struct UrlData *data, timerid timer)
 {
   switch(timer) {
   default:
@@ -111,19 +111,19 @@ void pgrsTime(struct UrlData *data, timerid timer)
     /* This is set at the start of a single fetch, there may be several
        fetches within an operation, why we add all other times relative
        to this one */
-    data->progress.t_startsingle = tvnow();
+    data->progress.t_startsingle = Curl_tvnow();
     break;
 
   case TIMER_NAMELOOKUP:
-    data->progress.t_nslookup += tvdiff(tvnow(),
+    data->progress.t_nslookup += Curl_tvdiff(Curl_tvnow(),
                                         data->progress.t_startsingle);
     break;
   case TIMER_CONNECT:
-    data->progress.t_connect += tvdiff(tvnow(),
+    data->progress.t_connect += Curl_tvdiff(Curl_tvnow(),
                                        data->progress.t_startsingle);
     break;
   case TIMER_PRETRANSFER:
-    data->progress.t_pretransfer += tvdiff(tvnow(),
+    data->progress.t_pretransfer += Curl_tvdiff(Curl_tvnow(),
                                            data->progress.t_startsingle);
     break;
   case TIMER_POSTRANSFER:
@@ -132,22 +132,22 @@ void pgrsTime(struct UrlData *data, timerid timer)
   }
 }
 
-void pgrsStartNow(struct UrlData *data)
+void Curl_pgrsStartNow(struct UrlData *data)
 {
-  data->progress.start = tvnow();
+  data->progress.start = Curl_tvnow();
 }
 
-void pgrsSetDownloadCounter(struct UrlData *data, double size)
+void Curl_pgrsSetDownloadCounter(struct UrlData *data, double size)
 {
   data->progress.downloaded = size;
 }
 
-void pgrsSetUploadCounter(struct UrlData *data, double size)
+void Curl_pgrsSetUploadCounter(struct UrlData *data, double size)
 {
   data->progress.uploaded = size;
 }
 
-void pgrsSetDownloadSize(struct UrlData *data, double size)
+void Curl_pgrsSetDownloadSize(struct UrlData *data, double size)
 {
   if(size > 0) {
     data->progress.size_dl = size;
@@ -155,7 +155,7 @@ void pgrsSetDownloadSize(struct UrlData *data, double size)
   }
 }
 
-void pgrsSetUploadSize(struct UrlData *data, double size)
+void Curl_pgrsSetUploadSize(struct UrlData *data, double size)
 {
   if(size > 0) {
     data->progress.size_ul = size;
@@ -171,7 +171,7 @@ void pgrsSetUploadSize(struct UrlData *data, double size)
 
  */
 
-int pgrsUpdate(struct UrlData *data)
+int Curl_pgrsUpdate(struct UrlData *data)
 {
   struct timeval now;
   int result;
@@ -210,16 +210,16 @@ int pgrsUpdate(struct UrlData *data)
     data->progress.flags |= PGRS_HEADERS_OUT; /* headers are shown */
   }
 
-  now = tvnow(); /* what time is it */
+  now = Curl_tvnow(); /* what time is it */
 
-  if(data->progress.lastshow == tvlong(now))
+  /* The exact time spent so far */
+  data->progress.timespent = Curl_tvdiff (now, data->progress.start);
+
+  if(data->progress.lastshow == Curl_tvlong(now))
     return 0; /* never update this more than once a second if the end isn't 
                  reached */
   data->progress.lastshow = now.tv_sec;
 
-  /* The exact time spent so far */
-  data->progress.timespent = tvdiff (now, data->progress.start);
-
   /* The average download speed this far */
   data->progress.dlspeed = data->progress.downloaded/(data->progress.timespent!=0.0?data->progress.timespent:1.0);
 
@@ -257,17 +257,13 @@ int pgrsUpdate(struct UrlData *data)
   }
 
       /* Figure out the estimated time of arrival for the upload */
-  if(data->progress.flags & PGRS_UL_SIZE_KNOWN) {
-    if(!data->progress.ulspeed)
-      data->progress.ulspeed=1;
+  if((data->progress.flags & PGRS_UL_SIZE_KNOWN) && data->progress.ulspeed){
     ulestimate = data->progress.size_ul / data->progress.ulspeed;
     ulpercen = (data->progress.uploaded / data->progress.size_ul)*100;
   }
 
   /* ... and the download */
-  if(data->progress.flags & PGRS_DL_SIZE_KNOWN) {
-    if(!data->progress.dlspeed)
-      data->progress.dlspeed=1;
+  if((data->progress.flags & PGRS_DL_SIZE_KNOWN) && data->progress.dlspeed) {
     dlestimate = data->progress.size_dl / data->progress.dlspeed;
     dlpercen = (data->progress.downloaded / data->progress.size_dl)*100;
   }

lib/progress.h

@@ -36,14 +36,14 @@ typedef enum {
   TIMER_LAST /* must be last */
 } timerid;
   
-void pgrsDone(struct UrlData *data);
-void pgrsStartNow(struct UrlData *data);
-void pgrsSetDownloadSize(struct UrlData *data, double size);
-void pgrsSetUploadSize(struct UrlData *data, double size);
-void pgrsSetDownloadCounter(struct UrlData *data, double size);
-void pgrsSetUploadCounter(struct UrlData *data, double size);
-int pgrsUpdate(struct UrlData *data);
-void pgrsTime(struct UrlData *data, timerid timer);
+void Curl_pgrsDone(struct UrlData *data);
+void Curl_pgrsStartNow(struct UrlData *data);
+void Curl_pgrsSetDownloadSize(struct UrlData *data, double size);
+void Curl_pgrsSetUploadSize(struct UrlData *data, double size);
+void Curl_pgrsSetDownloadCounter(struct UrlData *data, double size);
+void Curl_pgrsSetUploadCounter(struct UrlData *data, double size);
+int Curl_pgrsUpdate(struct UrlData *data);
+void Curl_pgrsTime(struct UrlData *data, timerid timer);
 
 
 /* Don't show progress for sizes smaller than: */

lib/security.c

@@ -40,13 +40,22 @@
 
 #ifdef KRB4
 
+#define _MPRINTF_REPLACE /* we want curl-functions instead of native ones */
 #include <curl/mprintf.h>
 
 #include "security.h"
 #include <stdlib.h>
 #include <string.h>
 #include <netdb.h>
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
 #include "base64.h"
+#include "sendf.h"
+#include "ftp.h"
+
 /* The last #include file should be: */
 #ifdef MALLOCDEBUG
 #include "memdebug.h"
@@ -64,6 +73,7 @@ static struct {
     { prot_private, "private" }
 };
 
+#if 0
 static const char *
 level_to_name(enum protection_level level)
 {
@@ -73,6 +83,7 @@ level_to_name(enum protection_level level)
 	    return level_names[i].name;
     return "unknown";
 }
+#endif
 
 #ifndef FTP_SERVER /* not used in server */
 static enum protection_level 
@@ -319,7 +330,7 @@ sec_vfprintf2(struct connectdata *conn, FILE *f, const char *fmt, va_list ap)
   if(conn->data_prot == prot_clear)
     return vfprintf(f, fmt, ap);
   else {
-    buf = maprintf(fmt, ap);
+    buf = aprintf(fmt, ap);
     ret = buffer_write(&conn->out_buffer, buf, strlen(buf));
     free(buf);
     return ret;
@@ -360,7 +371,7 @@ sec_read_msg(struct connectdata *conn, char *s, int level)
     int code;
     
     buf = malloc(strlen(s));
-    len = base64_decode(s + 4, buf); /* XXX */
+    len = Curl_base64_decode(s + 4, buf); /* XXX */
     
     len = (*mech->decode)(conn->app_data, buf, len, level, conn);
     if(len < 0)
@@ -390,7 +401,7 @@ sec_vfprintf(struct connectdata *conn, FILE *f, const char *fmt, va_list ap)
     if(!conn->sec_complete)
 	return vfprintf(f, fmt, ap);
     
-    buf = maprintf(fmt, ap);
+    buf = aprintf(fmt, ap);
     len = (*mech->encode)(conn->app_data, buf, strlen(buf),
                           conn->command_prot, &enc,
 			  conn);
@@ -399,7 +410,7 @@ sec_vfprintf(struct connectdata *conn, FILE *f, const char *fmt, va_list ap)
 	failf(conn->data, "Failed to encode command.\n");
 	return -1;
     }
-    if(base64_encode(enc, len, &buf) < 0){
+    if(Curl_base64_encode(enc, len, &buf) < 0){
       failf(conn->data, "Out of memory base64-encoding.\n");
       return -1;
     }
@@ -461,7 +472,6 @@ sec_status(void)
 static int
 sec_prot_internal(struct connectdata *conn, int level)
 {
-    int ret;
     char *p;
     unsigned int s = 1048576;
     size_t nread;
@@ -472,11 +482,11 @@ sec_prot_internal(struct connectdata *conn, int level)
     }
 
     if(level){
-      ftpsendf(conn->data->firstsocket, conn,
+      Curl_ftpsendf(conn->data->firstsocket, conn,
                     "PBSZ %u", s);
       /* wait for feedback */
-      nread = GetLastResponse(conn->data->firstsocket,
-                              conn->data->buffer, conn);
+      nread = Curl_GetFTPResponse(conn->data->firstsocket,
+                                  conn->data->buffer, conn, NULL);
       if(nread < 0)
         return /*CURLE_OPERATION_TIMEOUTED*/-1;
       if(/*ret != COMPLETE*/conn->data->buffer[0] != '2'){
@@ -491,11 +501,11 @@ sec_prot_internal(struct connectdata *conn, int level)
         conn->buffer_size = s;
     }
 
-    ftpsendf(conn->data->firstsocket, conn,
+    Curl_ftpsendf(conn->data->firstsocket, conn,
                   "PROT %c", level["CSEP"]);
     /* wait for feedback */
-    nread = GetLastResponse(conn->data->firstsocket,
-			    conn->data->buffer, conn);
+    nread = Curl_GetFTPResponse(conn->data->firstsocket,
+                                conn->data->buffer, conn, NULL);
     if(nread < 0)
       return /*CURLE_OPERATION_TIMEOUTED*/-1;
     if(/*ret != COMPLETE*/conn->data->buffer[0] != '2'){
@@ -600,11 +610,11 @@ sec_login(struct connectdata *conn)
 	}
 	infof(data, "Trying %s...\n", (*m)->name);
 	/*ret = command("AUTH %s", (*m)->name);***/
-	ftpsendf(conn->data->firstsocket, conn,
+	Curl_ftpsendf(conn->data->firstsocket, conn,
                  "AUTH %s", (*m)->name);
 	/* wait for feedback */
-	nread = GetLastResponse(conn->data->firstsocket,
-				conn->data->buffer, conn);
+	nread = Curl_GetFTPResponse(conn->data->firstsocket,
+                                    conn->data->buffer, conn, NULL);
 	if(nread < 0)
 	    return /*CURLE_OPERATION_TIMEOUTED*/-1;
 	if(/*ret != CONTINUE*/conn->data->buffer[0] != '3'){

lib/sendf.c

@@ -52,7 +52,7 @@
 
 /* infof() is for info message along the way */
 
-void infof(struct UrlData *data, char *fmt, ...)
+void Curl_infof(struct UrlData *data, char *fmt, ...)
 {
   va_list ap;
   if(data->bits.verbose) {
@@ -66,7 +66,7 @@ void infof(struct UrlData *data, char *fmt, ...)
 /* failf() is for messages stating why we failed, the LAST one will be
    returned for the user (if requested) */
 
-void failf(struct UrlData *data, char *fmt, ...)
+void Curl_failf(struct UrlData *data, char *fmt, ...)
 {
   va_list ap;
   va_start(ap, fmt);
@@ -77,100 +77,93 @@ void failf(struct UrlData *data, char *fmt, ...)
   va_end(ap);
 }
 
-/* sendf() sends the formated data to the server */
-size_t sendf(int fd, struct UrlData *data, char *fmt, ...)
+/* Curl_sendf() sends formated data to the server */
+size_t Curl_sendf(int sockfd, struct connectdata *conn,
+                  char *fmt, ...)
 {
+  struct UrlData *data = conn->data;
   size_t bytes_written;
   char *s;
   va_list ap;
   va_start(ap, fmt);
-  s = mvaprintf(fmt, ap);
+  s = vaprintf(fmt, ap); /* returns an allocated string */
   va_end(ap);
   if(!s)
     return 0; /* failure */
   if(data->bits.verbose)
     fprintf(data->err, "> %s", s);
 
-#ifndef USE_SSLEAY
-  bytes_written = swrite(fd, s, strlen(s));
-#else /* USE_SSLEAY */
-  if (data->ssl.use) {
-    bytes_written = SSL_write(data->ssl.handle, s, strlen(s));
-  } else {
-    bytes_written = swrite(fd, s, strlen(s));
-  }
-#endif /* USE_SSLEAY */
+  /* Write the buffer to the socket */
+  Curl_write(conn, sockfd, s, strlen(s), &bytes_written);
+
   free(s); /* free the output string */
-  return(bytes_written);
+
+  return bytes_written;
 }
 
 /*
- * ftpsendf() sends the formated string as a ftp command to a ftp server
- *
- * NOTE: we build the command in a fixed-length buffer, which sets length
- * restrictions on the command!
+ * Curl_write() is an internal write function that sends plain (binary) data
+ * to the server. Works with plain sockets, SSL or kerberos.
  *
  */
-size_t ftpsendf(int fd, struct connectdata *conn, char *fmt, ...)
-{
-  size_t bytes_written;
-  char s[256];
-
-  va_list ap;
-  va_start(ap, fmt);
-  vsnprintf(s, 250, fmt, ap);
-  va_end(ap);
-
-  if(conn->data->bits.verbose)
-    fprintf(conn->data->err, "> %s\n", s);
-
-  strcat(s, "\r\n"); /* append a trailing CRLF */
-
-#ifdef KRB4
-  if(conn->sec_complete && conn->data->cmdchannel) {
-    bytes_written = sec_fprintf(conn, conn->data->cmdchannel, s);
-    fflush(conn->data->cmdchannel);
-  }
-  else
-#endif /* KRB4 */
-    {
-      bytes_written = swrite(fd, s, strlen(s));
-    }
-  return(bytes_written);
-}
-
-/* ssend() sends plain (binary) data to the server */
-size_t ssend(int fd, struct connectdata *conn, void *mem, size_t len)
+CURLcode Curl_write(struct connectdata *conn, int sockfd,
+                    void *mem, size_t len,
+                    size_t *written)
 {
   size_t bytes_written;
   struct UrlData *data=conn->data; /* conn knows data, not vice versa */
 
 #ifdef USE_SSLEAY
   if (data->ssl.use) {
+    int loop=100; /* just a precaution to never loop endlessly */
+    while(loop--) {
       bytes_written = SSL_write(data->ssl.handle, mem, len);
+      if((-1 != bytes_written) ||
+         (SSL_ERROR_WANT_WRITE != SSL_get_error(data->ssl.handle,
+                                                bytes_written) ))
+        break;
+    }
   }
   else {
 #endif
 #ifdef KRB4
     if(conn->sec_complete) {
-      bytes_written = sec_write(conn, fd, mem, len);
+      bytes_written = sec_write(conn, sockfd, mem, len);
     }
     else
 #endif /* KRB4 */
-      bytes_written = swrite(fd, mem, len);
+      bytes_written = swrite(sockfd, mem, len);
 #ifdef USE_SSLEAY
   }
 #endif
 
-  return bytes_written;
+  *written = bytes_written;
+  return CURLE_OK;
 }
 
+/*
+ * External write-function, writes to the data-socket.
+ * Takes care of plain sockets, SSL or kerberos transparently.
+ */
+CURLcode curl_write(CURLconnect *c_conn, char *buf, size_t amount,
+                   size_t *n)
+{
+  struct connectdata *conn = (struct connectdata *)c_conn;
+
+  if(!n || !conn || (conn->handle != STRUCT_CONNECT))
+    return CURLE_FAILED_INIT;
+
+  return Curl_write(conn, conn->sockfd, buf, amount, n);
+}
+
+
+
 /* client_write() sends data to the write callback(s)
 
    The bit pattern defines to what "streams" to write to. Body and/or header.
    The defines are in sendf.h of course.
  */
-CURLcode client_write(struct UrlData *data,
+CURLcode Curl_client_write(struct UrlData *data,
                            int type,
                            char *ptr,
                            size_t len)
@@ -200,90 +193,54 @@ CURLcode client_write(struct UrlData *data,
 
 
 /*
- * add_buffer_init() returns a fine buffer struct
+ * Internal read-from-socket function. This is meant to deal with plain
+ * sockets, SSL sockets and kerberos sockets.
  */
-send_buffer *add_buffer_init(void)
+CURLcode Curl_read(struct connectdata *conn, int sockfd,
+                   char *buf, size_t buffersize,
+                   size_t *n)
 {
-  send_buffer *blonk;
-  blonk=(send_buffer *)malloc(sizeof(send_buffer));
-  if(blonk) {
-    memset(blonk, 0, sizeof(send_buffer));
-    return blonk;
+  struct UrlData *data = conn->data;
+  size_t nread;
+
+#ifdef USE_SSLEAY
+  if (data->ssl.use) {
+    int loop=100; /* just a precaution to never loop endlessly */
+    while(loop--) {
+      nread = SSL_read(data->ssl.handle, buf, buffersize);
+      if((-1 != nread) ||
+         (SSL_ERROR_WANT_READ != SSL_get_error(data->ssl.handle, nread) ))
+        break;
     }
-  return NULL; /* failed, go home */
   }
-
-/*
- * add_buffer_send() sends a buffer and frees all associated memory.
- */
-size_t add_buffer_send(int sockfd, struct connectdata *conn, send_buffer *in)
-{
-  size_t amount;
-  if(conn->data->bits.verbose) {
-    fputs("> ", conn->data->err);
-    /* this data _may_ contain binary stuff */
-    fwrite(in->buffer, in->size_used, 1, conn->data->err);
-  }
-
-  amount = ssend(sockfd, conn, in->buffer, in->size_used);
-
-  if(in->buffer)
-    free(in->buffer);
-  free(in);
-
-  return amount;
-}
-
-
-/* 
- * add_bufferf() builds a buffer from the formatted input
- */
-CURLcode add_bufferf(send_buffer *in, char *fmt, ...)
-{
-  CURLcode result = CURLE_OUT_OF_MEMORY;
-  char *s;
-  va_list ap;
-  va_start(ap, fmt);
-  s = mvaprintf(fmt, ap); /* this allocs a new string to append */
-  va_end(ap);
-
-  if(s) {
-    result = add_buffer(in, s, strlen(s));
-    free(s);
-  }
-  return result;
-}
-
-/*
- * add_buffer() appends a memory chunk to the existing one
- */
-CURLcode add_buffer(send_buffer *in, void *inptr, size_t size)
-{
-  char *new_rb;
-  int new_size;
-
-  if(size > 0) {
-    if(!in->buffer ||
-       ((in->size_used + size) > (in->size_max - 1))) {
-      new_size = (in->size_used+size)*2;
-      if(in->buffer)
-        /* we have a buffer, enlarge the existing one */
-        new_rb = (char *)realloc(in->buffer, new_size);
+  else {
+#endif
+#ifdef KRB4
+    if(conn->sec_complete)
+      nread = sec_read(conn, sockfd, buf, buffersize);
     else
-        /* create a new buffer */
-        new_rb = (char *)malloc(new_size);
-
-      if(!new_rb)
-        return CURLE_OUT_OF_MEMORY;
-
-      in->buffer = new_rb;
-      in->size_max = new_size;
+#endif
+      nread = sread (sockfd, buf, buffersize);
+#ifdef USE_SSLEAY
   }
-    memcpy(&in->buffer[in->size_used], inptr, size);
-      
-    in->size_used += size;
-  }
-
+#endif /* USE_SSLEAY */
+  *n = nread;
   return CURLE_OK;
 }
 
+/*
+ * The public read function reads from the 'sockfd' file descriptor only.
+ * Use the Curl_read() internally when you want to specify fd.
+ */
+
+CURLcode curl_read(CURLconnect *c_conn, char *buf, size_t buffersize,
+                   size_t *n)
+{
+  struct connectdata *conn = (struct connectdata *)c_conn;
+
+  if(!n || !conn || (conn->handle != STRUCT_CONNECT))
+    return CURLE_FAILED_INIT;
+
+  return Curl_read(conn, conn->sockfd, buf, buffersize, n);
+}
+

lib/sendf.h

@@ -23,11 +23,12 @@
  * $Id$
  *****************************************************************************/
 
-size_t ftpsendf(int fd, struct connectdata *, char *fmt, ...);
-size_t sendf(int fd, struct UrlData *, char *fmt, ...);
-size_t ssend(int fd, struct connectdata *, void *fmt, size_t len);
-void infof(struct UrlData *, char *fmt, ...);
-void failf(struct UrlData *, char *fmt, ...);
+size_t Curl_sendf(int fd, struct connectdata *, char *fmt, ...);
+void Curl_infof(struct UrlData *, char *fmt, ...);
+void Curl_failf(struct UrlData *, char *fmt, ...);
+
+#define infof Curl_infof
+#define failf Curl_failf
 
 struct send_buffer {
   char *buffer;
@@ -40,12 +41,16 @@ typedef struct send_buffer send_buffer;
 #define CLIENTWRITE_HEADER 2
 #define CLIENTWRITE_BOTH   (CLIENTWRITE_BODY|CLIENTWRITE_HEADER)
 
-CURLcode client_write(struct UrlData *data, int type, char *ptr,
+CURLcode Curl_client_write(struct UrlData *data, int type, char *ptr,
                            size_t len);
-send_buffer *add_buffer_init(void);
-CURLcode add_buffer(send_buffer *in, void *inptr, size_t size);
-CURLcode add_bufferf(send_buffer *in, char *fmt, ...);
-size_t add_buffer_send(int sockfd, struct connectdata *conn, send_buffer *in);
 
+/* internal read-function, does plain socket, SSL and krb4 */
+CURLcode Curl_read(struct connectdata *conn, int sockfd,
+                   char *buf, size_t buffersize,
+                   size_t *n);
+/* internal write-function, does plain socket, SSL and krb4 */
+CURLcode Curl_write(struct connectdata *conn, int sockfd,
+                    void *mem, size_t len,
+                    size_t *written);
 
 #endif

lib/setup.h

@@ -100,7 +100,6 @@ defined(HAVE_LIBSSL) && defined(HAVE_LIBCRYPTO)
    1. close a socket
    2. read from a socket
    3. write to a socket
-   (Hopefully, only win32-crap do this weird name changing)
 
    4. set the SIGALRM signal timeout
    5. set dir/file naming defines
@@ -115,8 +114,8 @@ defined(HAVE_LIBSSL) && defined(HAVE_LIBCRYPTO)
 #else
      /* gcc-for-win is still good :) */
 #define sclose(x) close(x)
-#define sread(x,y,z) read(x,y,z)
-#define swrite(x,y,z) write(x,y,z)
+#define sread(x,y,z) recv(x,y,z,0)
+#define swrite(x,y,z) send(x,y,z,0)
 #define myalarm(x) alarm(x)
 #endif
 

lib/speedcheck.c

@@ -33,24 +33,24 @@
 #include "sendf.h"
 #include "speedcheck.h"
 
-void speedinit(struct UrlData *data)
+void Curl_speedinit(struct UrlData *data)
 {
   memset(&data->keeps_speed, 0, sizeof(struct timeval));
 }
 
-CURLcode speedcheck(struct UrlData *data,
+CURLcode Curl_speedcheck(struct UrlData *data,
                          struct timeval now)
 {
   if((data->progress.current_speed >= 0) &&
      data->low_speed_time &&
-     (tvlong(data->keeps_speed) != 0) &&
+     (Curl_tvlong(data->keeps_speed) != 0) &&
      (data->progress.current_speed < data->low_speed_limit)) {
 
     /* We are now below the "low speed limit". If we are below it
        for "low speed time" seconds we consider that enough reason
        to abort the download. */
     
-    if( tvdiff(now, data->keeps_speed) > data->low_speed_time) {
+    if( Curl_tvdiff(now, data->keeps_speed) > data->low_speed_time) {
       /* we have been this slow for long enough, now die */
       failf(data,
 	    "Operation too slow. "

lib/speedcheck.h

@@ -27,8 +27,8 @@
 
 #include "timeval.h"
 
-void speedinit(struct UrlData *data);
-CURLcode speedcheck(struct UrlData *data,
+void Curl_speedinit(struct UrlData *data);
+CURLcode Curl_speedcheck(struct UrlData *data,
                          struct timeval now);
 
 #endif

lib/ssluse.c

@@ -62,7 +62,8 @@ static int passwd_callback(char *buf, int num, int verify
  * from) source from the SSLeay package written by Eric Young
  * (eay@cryptsoft.com).  */
 
-int SSL_cert_stuff(struct UrlData *data, 
+static
+int cert_stuff(struct UrlData *data, 
                char *cert_file,
                char *key_file)
 {
@@ -124,6 +125,7 @@ int SSL_cert_stuff(struct UrlData *data,
 #endif
 
 #ifdef USE_SSLEAY
+static
 int cert_verify_callback(int ok, X509_STORE_CTX *ctx)
 {
   X509 *err_cert;
@@ -139,7 +141,7 @@ int cert_verify_callback(int ok, X509_STORE_CTX *ctx)
 
 /* ====================================================== */
 int
-UrgSSLConnect (struct UrlData *data)
+Curl_SSLConnect (struct UrlData *data)
 {
 #ifdef USE_SSLEAY
     int err;
@@ -163,7 +165,7 @@ UrgSSLConnect (struct UrlData *data)
       RAND_screen();
 #else
       int len;
-      char *area = MakeFormBoundary();
+      char *area = Curl_FormBoundary();
       if(!area)
 	return 3; /* out of memory */
 	
@@ -198,7 +200,7 @@ UrgSSLConnect (struct UrlData *data)
     }
     
     if(data->cert) {
-      if (!SSL_cert_stuff(data, data->cert, data->cert)) {
+      if (!cert_stuff(data, data->cert, data->cert)) {
 	failf(data, "couldn't use certificate!\n");
 	return 2;
       }

lib/ssluse.h

@@ -22,8 +22,5 @@
  *
  * $Id$
  *****************************************************************************/
-int SSL_cert_stuff(struct UrlData *data, 
-		   char *cert_file,
-		   char *key_file);
-int UrgSSLConnect (struct UrlData *data);
+int Curl_SSLConnect (struct UrlData *data);
 #endif

lib/strequal.c

@@ -25,7 +25,7 @@
 
 #include <string.h>
 
-int strequal(const char *first, const char *second)
+int Curl_strequal(const char *first, const char *second)
 {
 #if defined(HAVE_STRCASECMP)
   return !strcasecmp(first, second);
@@ -45,7 +45,7 @@ int strequal(const char *first, const char *second)
 #endif
 }
 
-int strnequal(const char *first, const char *second, size_t max)
+int Curl_strnequal(const char *first, const char *second, size_t max)
 {
 #if defined(HAVE_STRCASECMP)
   return !strncasecmp(first, second, max);

lib/strequal.h

@@ -22,7 +22,10 @@
  *
  * $Id$
  *****************************************************************************/
-int strequal(const char *first, const char *second);
-int strnequal(const char *first, const char *second, size_t max);
+int Curl_strequal(const char *first, const char *second);
+int Curl_strnequal(const char *first, const char *second, size_t max);
+
+#define strequal(a,b) Curl_strequal(a,b)
+#define strnequal(a,b,c) Curl_strnequal(a,b,c)
 
 #endif

lib/telnet.c

@@ -71,17 +71,14 @@
 
 #include "urldata.h"
 #include <curl/curl.h>
-#include "download.h"
+#include "transfer.h"
 #include "sendf.h"
-#include "formdata.h"
-#include "progress.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
 
 #define  TELOPTS
 #define  TELCMDS
-#define  SLC_NAMES
 
 #include "arpa_telnet.h"
 
@@ -98,10 +95,7 @@
 #define  SB_EOF() (subpointer >= subend)
 #define  SB_LEN() (subend - subpointer)
 
-void telwrite(struct UrlData *data,
-	      unsigned char *buffer,	/* Data to write */
-	      int count);		/* Number of bytes to write */
-
+static
 void telrcv(struct UrlData *data,
 	    unsigned char *inbuf,	/* Data received from socket */
 	    int count);			/* Number of bytes received */
@@ -155,6 +149,7 @@ static int him[256];
 static int himq[256]; 
 static int him_preferred[256]; 
 
+static
 void init_telnet(struct UrlData *data)
 {
    telrcv_state = TS_DATA;
@@ -246,6 +241,7 @@ static void send_negotiation(struct UrlData *data, int cmd, int option)
    printoption(data, "SENT", cmd, option);
 }
 
+static
 void set_remote_option(struct UrlData *data, int option, int newstate)
 {
    if(newstate == YES)
@@ -326,6 +322,7 @@ void set_remote_option(struct UrlData *data, int option, int newstate)
    }
 }
 
+static
 void rec_will(struct UrlData *data, int option)
 {
    switch(him[option])
@@ -377,6 +374,7 @@ void rec_will(struct UrlData *data, int option)
    }
 }
    
+static
 void rec_wont(struct UrlData *data, int option)
 {
    switch(him[option])
@@ -500,6 +498,7 @@ void set_local_option(struct UrlData *data, int option, int newstate)
    }
 }
 
+static
 void rec_do(struct UrlData *data, int option)
 {
    switch(us[option])
@@ -551,6 +550,7 @@ void rec_do(struct UrlData *data, int option)
    }
 }
 
+static   
 void rec_dont(struct UrlData *data, int option)
 {
    switch(us[option])
@@ -669,6 +669,7 @@ static void suboption(struct UrlData *data)
    return;
 }
 
+static
 void telrcv(struct UrlData *data,
 	    unsigned char *inbuf,	/* Data received from socket */
 	    int count)			/* Number of bytes received */
@@ -689,7 +690,7 @@ void telrcv(struct UrlData *data,
 	    break;   /* Ignore \0 after CR */
 	 }
 
-	 client_write(data, CLIENTWRITE_BODY, (char *)&c, 1);
+	 Curl_client_write(data, CLIENTWRITE_BODY, (char *)&c, 1);
 	 continue;
 
       case TS_DATA:
@@ -703,7 +704,7 @@ void telrcv(struct UrlData *data,
 	    telrcv_state = TS_CR;
 	 }
 
-	 client_write(data, CLIENTWRITE_BODY, (char *)&c, 1);
+	 Curl_client_write(data, CLIENTWRITE_BODY, (char *)&c, 1);
 	 continue;
 
       case TS_IAC:
@@ -727,7 +728,7 @@ void telrcv(struct UrlData *data,
 	   telrcv_state = TS_SB;
 	   continue;
 	case IAC:
-          client_write(data, CLIENTWRITE_BODY, (char *)&c, 1);
+          Curl_client_write(data, CLIENTWRITE_BODY, (char *)&c, 1);
           break;
 	case DM:
 	case NOP:
@@ -818,41 +819,12 @@ void telrcv(struct UrlData *data,
    }
 }
 
-void telwrite(struct UrlData *data,
-	      unsigned char *buffer,	/* Data to write */
-	      int count)		/* Number of bytes to write */
-{
-   unsigned char outbuf[2];
-   int out_count = 0;
-   int bytes_written;
-
-   while(count--)
-   {
-      outbuf[0] = *buffer++;
-      out_count = 1;
-      if(outbuf[0] == IAC)
-	 outbuf[out_count++] = IAC;
-      
-#ifndef USE_SSLEAY
-      bytes_written = swrite(data->firstsocket, outbuf, out_count);
-#else
-      if (data->ssl.use) {
-        bytes_written = SSL_write(data->ssl.handle, (char *)outbuf,
-                                  out_count);
-      }
-      else {
-        bytes_written = swrite(data->firstsocket, outbuf, out_count);
-      }
-#endif /* USE_SSLEAY */
-   }
-}
-
-CURLcode telnet_done(struct connectdata *conn)
+CURLcode Curl_telnet_done(struct connectdata *conn)
 {
   return CURLE_OK;
 }
 
-CURLcode telnet(struct connectdata *conn)
+CURLcode Curl_telnet(struct connectdata *conn)
 {
   struct UrlData *data = conn->data;
   int sockfd = data->firstsocket;
@@ -861,7 +833,7 @@ CURLcode telnet(struct connectdata *conn)
 
   bool keepon = TRUE;
   char *buf = data->buffer;
-  int nread;
+  size_t nread;
 
   init_telnet(data);
    
@@ -871,37 +843,37 @@ CURLcode telnet(struct connectdata *conn)
 
   keepfd = readfd;
 
-   while (keepon)
-   {
+  while (keepon) {
     readfd = keepfd;		/* set this every lap in the loop */
 
-      switch (select (sockfd + 1, &readfd, NULL, NULL, NULL))
-      {
+    switch (select (sockfd + 1, &readfd, NULL, NULL, NULL)) {
     case -1:			/* error, stop reading */
       keepon = FALSE;
       continue;
     case 0:			/* timeout */
       break;
     default:			/* read! */
-	 if(FD_ISSET(1, &readfd))
-	 {
+      if(FD_ISSET(1, &readfd)) { /* read from stdin */
+        unsigned char outbuf[2];
+        int out_count = 0;
+        size_t bytes_written;
+        char *buffer = buf;
+        
         nread = read(1, buf, 255);
-	    telwrite(data, (unsigned char *)buf, nread);
+
+        while(nread--) {
+          outbuf[0] = *buffer++;
+          out_count = 1;
+          if(outbuf[0] == IAC)
+            outbuf[out_count++] = IAC;
+      
+          Curl_write(conn, data->firstsocket, outbuf,
+                     out_count, &bytes_written);
+        }
       }
 
       if(FD_ISSET(sockfd, &readfd))
-	 {
-#ifndef USE_SSLEAY
-	    nread = sread (sockfd, buf, BUFSIZE - 1);
-#else
-	    if (data->ssl.use) {
-	       nread = SSL_read (data->ssl.handle, buf, BUFSIZE - 1);
-	    }
-	    else {
-	       nread = sread (sockfd, buf, BUFSIZE - 1);
-	    }
-#endif /* USE_SSLEAY */
-	 }
+        Curl_read(conn, sockfd, buf, BUFSIZE - 1, &nread);
 
       /* if we receive 0 or less here, the server closed the connection and
          we bail out from this! */

lib/telnet.h

@@ -23,7 +23,7 @@
  *
  * $Id$
  *****************************************************************************/
-CURLcode telnet(struct connectdata *conn);
-CURLcode telnet_done(struct connectdata *conn);
+CURLcode Curl_telnet(struct connectdata *conn);
+CURLcode Curl_telnet_done(struct connectdata *conn);
 
 #endif

lib/timeval.c

@@ -53,7 +53,7 @@ gettimeofday (struct timeval *tp, void *nothing)
 #endif
 #endif
 
-struct timeval tvnow ()
+struct timeval Curl_tvnow ()
 {
  struct timeval now;
 #ifdef HAVE_GETTIMEOFDAY
@@ -65,12 +65,12 @@ struct timeval tvnow ()
  return now;
 }
 
-double tvdiff (struct timeval t1, struct timeval t2)
+double Curl_tvdiff (struct timeval t1, struct timeval t2)
 {
  return (double)(t1.tv_sec - t2.tv_sec) + ((t1.tv_usec-t2.tv_usec)/1000000.0);
 }
 
-long tvlong (struct timeval t1)
+long Curl_tvlong (struct timeval t1)
 {
  return t1.tv_sec;
 }

lib/timeval.h

@@ -42,8 +42,8 @@ struct timeval {
 #endif
 #endif
 
-struct timeval tvnow ();
-double tvdiff (struct timeval t1, struct timeval t2);
-long tvlong (struct timeval t1);
+struct timeval Curl_tvnow ();
+double Curl_tvdiff (struct timeval t1, struct timeval t2);
+long Curl_tvlong (struct timeval t1);
 
 #endif

lib/transfer.c

@@ -84,7 +84,7 @@
 
 #include "getenv.h"
 #include "hostip.h"
-#include "download.h"
+#include "transfer.h"
 #include "sendf.h"
 #include "speedcheck.h"
 #include "getpass.h"
@@ -103,14 +103,17 @@
 #define min(a, b)   ((a) < (b) ? (a) : (b))
 #endif
 
-CURLcode 
+/* Parts of this function was written by the friendly Mark Butler
+   <butlerm@xmission.com>. */
+
+CURLcode static
 _Transfer(struct connectdata *c_conn)
 {
   size_t nread;                 /* number of bytes read */
   int bytecount = 0;            /* total number of bytes read */
   int writebytecount = 0;       /* number of bytes written */
   long contentlength=0;         /* size of incoming data */
-  struct timeval start = tvnow();
+  struct timeval start = Curl_tvnow();
   struct timeval now = start;   /* current time */
   bool header = TRUE;		/* incoming data has HTTP header */
   int headerline = 0;		/* counts header lines to better track the
@@ -130,8 +133,6 @@ _Transfer(struct connectdata *c_conn)
   CURLcode urg;
   time_t timeofdoc=0;
   long bodywrites=0;
-
-  char newurl[URL_MAX_LENGTH];		/* buffer for Location: URL */
   int writetype;
 
   /* the highest fd we use + 1 */
@@ -151,19 +152,19 @@ _Transfer(struct connectdata *c_conn)
 
   myalarm (0);			/* switch off the alarm-style timeout */
 
-  now = tvnow();
+  now = Curl_tvnow();
   start = now;
 
 #define KEEP_READ  1
 #define KEEP_WRITE 2
 
-  pgrsTime(data, TIMER_PRETRANSFER);
-  speedinit(data);
+  Curl_pgrsTime(data, TIMER_PRETRANSFER);
+  Curl_speedinit(data);
 
   if (!conn->getheader) {
     header = FALSE;
     if(conn->size > 0)
-      pgrsSetDownloadSize(data, conn->size);
+      Curl_pgrsSetDownloadSize(data, conn->size);
   }
   /* we want header and/or body, if neither then don't do this! */
   if(conn->getheader ||
@@ -221,7 +222,7 @@ _Transfer(struct connectdata *c_conn)
       default:
         if((keepon & KEEP_READ) && FD_ISSET(conn->sockfd, &readfd)) {
           /* read! */
-          urg = curl_read(conn, buf, BUFSIZE -1, &nread);
+          urg = Curl_read(conn, conn->sockfd, buf, BUFSIZE -1, &nread);
 
           /* NULL terminate, allowing string ops to be used */
           if (0 < (signed int) nread)
@@ -314,7 +315,7 @@ _Transfer(struct connectdata *c_conn)
                 if ('\n' == *p)
                   p++;		/* pass the \n byte */
 
-                pgrsSetDownloadSize(data, conn->size);
+                Curl_pgrsSetDownloadSize(data, conn->size);
 
                 header = FALSE;	/* no more header to parse! */
 
@@ -324,7 +325,7 @@ _Transfer(struct connectdata *c_conn)
                 if (data->bits.http_include_header)
                   writetype |= CLIENTWRITE_BODY;
 
-                urg = client_write(data, writetype, data->headerbuff,
+                urg = Curl_client_write(data, writetype, data->headerbuff,
                                         p - data->headerbuff);
                 if(urg)
                   return urg;
@@ -374,7 +375,7 @@ _Transfer(struct connectdata *c_conn)
               }
               else if(data->cookies &&
                       strnequal("Set-Cookie: ", p, 11)) {
-                cookie_add(data->cookies, TRUE, &p[12]);
+                Curl_cookie_add(data->cookies, TRUE, &p[12]);
               }
               else if(strnequal("Last-Modified:", p,
                                 strlen("Last-Modified:")) &&
@@ -386,19 +387,28 @@ _Transfer(struct connectdata *c_conn)
               }
               else if ((code >= 300 && code < 400) &&
                        (data->bits.http_follow_location) &&
-                       strnequal("Location", p, 8) &&
-                       sscanf (p+8, ": %" URL_MAX_LENGTH_TXT "s",
-                               newurl)) {
-                /* this is the URL that the server advices us to get
-                   instead */
-                data->newurl = strdup (newurl);
+                       strnequal("Location: ", p, 10)) {
+                /* this is the URL that the server advices us to get instead */
+                char *ptr;
+                char *start=p;
+                char backup;
+
+                start += 10; /* pass "Location: " */
+                ptr = start; /* start scanning here */
+                /* scan through the string to find the end */
+                while(*ptr && !isspace((int)*ptr))
+                  ptr++;
+                backup = *ptr; /* store the ending letter */
+                *ptr = '\0';   /* zero terminate */
+                data->newurl = strdup(start); /* clone string */
+                *ptr = backup; /* restore ending letter */
               }
 
               writetype = CLIENTWRITE_HEADER;
               if (data->bits.http_include_header)
                 writetype |= CLIENTWRITE_BODY;
 
-              urg = client_write(data, writetype, p, hbuflen);
+              urg = Curl_client_write(data, writetype, p, hbuflen);
               if(urg)
                 return urg;
 
@@ -456,14 +466,14 @@ _Transfer(struct connectdata *c_conn)
                     default:
                       if(timeofdoc < data->timevalue) {
                         infof(data,
-                              "The requested document is not new enough");
+                              "The requested document is not new enough\n");
                         return CURLE_OK;
                       }
                       break;
                     case TIMECOND_IFUNMODSINCE:
                       if(timeofdoc > data->timevalue) {
                         infof(data,
-                              "The requested document is not old enough");
+                              "The requested document is not old enough\n");
                         return CURLE_OK;
                       }
                       break;
@@ -484,9 +494,9 @@ _Transfer(struct connectdata *c_conn)
 
             bytecount += nread;
 
-            pgrsSetDownloadCounter(data, (double)bytecount);
+            Curl_pgrsSetDownloadCounter(data, (double)bytecount);
             
-            urg = client_write(data, CLIENTWRITE_BODY, str, nread);
+            urg = Curl_client_write(data, CLIENTWRITE_BODY, str, nread);
             if(urg)
               return urg;
 
@@ -513,7 +523,7 @@ _Transfer(struct connectdata *c_conn)
             break;
           }
           writebytecount += nread;
-          pgrsSetUploadCounter(data, (double)writebytecount);            
+          Curl_pgrsSetUploadCounter(data, (double)writebytecount);            
 
           /* convert LF to CRLF if so asked */
           if (data->crlf) {
@@ -531,7 +541,8 @@ _Transfer(struct connectdata *c_conn)
           }
 
           /* write to socket */
-          urg = curl_write(conn, buf, nread, &bytes_written);
+          urg = Curl_write(conn, conn->writesockfd, buf, nread,
+                           &bytes_written);
 
           if(nread != bytes_written) {
             failf(data, "Failed uploading data");
@@ -543,11 +554,11 @@ _Transfer(struct connectdata *c_conn)
         break;
       }
 
-      now = tvnow();
-      if(pgrsUpdate(data))
+      now = Curl_tvnow();
+      if(Curl_pgrsUpdate(data))
         urg = CURLE_ABORTED_BY_CALLBACK;
       else
-        urg = speedcheck (data, now);
+        urg = Curl_speedcheck (data, now);
       if (urg)
 	return urg;
 
@@ -560,7 +571,7 @@ _Transfer(struct connectdata *c_conn)
         conn->upload_bufsize=(long)min(data->progress.ulspeed, BUFSIZE);
       }
 
-      if (data->timeout && (tvdiff (now, start) > data->timeout)) {
+      if (data->timeout && (Curl_tvdiff (now, start) > data->timeout)) {
 	failf (data, "Operation timed out with %d out of %d bytes received",
 	       bytecount, conn->size);
 	return CURLE_OPERATION_TIMEOUTED;
@@ -573,7 +584,7 @@ _Transfer(struct connectdata *c_conn)
           contentlength-bytecount);
     return CURLE_PARTIAL_FILE;
   }
-  if(pgrsUpdate(data))
+  if(Curl_pgrsUpdate(data))
     return CURLE_ABORTED_BY_CALLBACK;
 
   if(conn->bytecountp)
@@ -592,10 +603,10 @@ CURLcode curl_transfer(CURL *curl)
   struct UrlData *data = curl;
   struct connectdata *c_connect=NULL;
 
-  pgrsStartNow(data);
+  Curl_pgrsStartNow(data);
 
   do {
-    pgrsTime(data, TIMER_STARTSINGLE);
+    Curl_pgrsTime(data, TIMER_STARTSINGLE);
     res = curl_connect(curl, (CURLconnect **)&c_connect);
     if(res == CURLE_OK) {
       res = curl_do(c_connect);
@@ -610,8 +621,9 @@ CURLcode curl_transfer(CURL *curl)
  
            This is assumed to happen for HTTP(S) only!
         */
-        char prot[16];
-        char path[URL_MAX_LENGTH];
+        char prot[16]; /* URL protocol string storage */
+        char letter;   /* used for a silly sscanf */
+
 	if (data->maxredirs && (data->followlocation >= data->maxredirs)) {
 	  failf(data,"Maximum (%d) redirects followed", data->maxredirs);
           curl_disconnect(c_connect);
@@ -639,8 +651,7 @@ CURLcode curl_transfer(CURL *curl)
           data->bits.http_set_referer = TRUE; /* might have been false */
         }
 
-        if(2 != sscanf(data->newurl, "%15[^:]://%" URL_MAX_LENGTH_TXT
-                       "s", prot, path)) {
+        if(2 != sscanf(data->newurl, "%15[^:]://%c", prot, &letter)) {
           /***
            *DANG* this is an RFC 2068 violation. The URL is supposed
            to be absolute and this doesn't seem to be that!
@@ -733,3 +744,32 @@ CURLcode curl_transfer(CURL *curl)
   return res;
 }
 
+
+CURLcode 
+Curl_Transfer(struct connectdata *c_conn, /* connection data */
+              int sockfd,	/* socket to read from or -1 */
+              int size,		/* -1 if unknown at this point */
+              bool getheader,	/* TRUE if header parsing is wanted */
+              long *bytecountp,	/* return number of bytes read or NULL */
+              int writesockfd,  /* socket to write to, it may very well be
+                                   the same we read from. -1 disables */
+              long *writebytecountp /* return number of bytes written or
+                                       NULL */
+              )
+{
+  struct connectdata *conn = (struct connectdata *)c_conn;
+  if(!conn)
+    return CURLE_BAD_FUNCTION_ARGUMENT;
+
+  /* now copy all input parameters */
+  conn->sockfd = sockfd;
+  conn->size = size;
+  conn->getheader = getheader;
+  conn->bytecountp = bytecountp;
+  conn->writesockfd = writesockfd;
+  conn->writebytecountp = writebytecountp;
+
+  return CURLE_OK;
+
+}
+          

lib/transfer.h

@@ -1,5 +1,5 @@
-#ifndef __DOWNLOAD_H
-#define __DOWNLOAD_H
+#ifndef __TRANSFER_H
+#define __TRANSFER_H
 /*****************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
@@ -22,8 +22,10 @@
  *
  * $Id$
  *****************************************************************************/
+CURLcode curl_transfer(CURL *curl);
+
 CURLcode 
-Transfer (struct connectdata *data,
+Curl_Transfer (struct connectdata *data,
                int sockfd,		/* socket to read from or -1 */
                int size,		/* -1 if unknown at this point */
                bool getheader,     	/* TRUE if header parsing is wanted */
@@ -33,4 +35,10 @@ Transfer (struct connectdata *data,
                long *writebytecountp /* return number of bytes written */
 );
 
+#ifdef _OLDCURL
+/* "hackish" define to make sources compile without too much human editing.
+   Don't use "Tranfer()" anymore! */
+#define Transfer(a,b,c,d,e,f,g) Curl_Transfer(a,b,c,d,e,f,g)
+#endif
+
 #endif

lib/url.c

@@ -85,9 +85,8 @@
 #include "ssluse.h"
 #include "hostip.h"
 #include "if2ip.h"
-#include "download.h"
+#include "transfer.h"
 #include "sendf.h"
-#include "speedcheck.h"
 #include "getpass.h"
 #include "progress.h"
 #include "cookie.h"
@@ -224,7 +223,7 @@ void static urlfree(struct UrlData *data, bool totally)
       /* the URL is allocated, free it! */
       free(data->url);
 
-    cookie_cleanup(data->cookies);
+    Curl_cookie_cleanup(data->cookies);
 
     free(data);
 
@@ -248,6 +247,7 @@ CURLcode curl_close(CURL *curl)
   return CURLE_OK;
 }
 
+static
 int my_getpass(void *clientp, char *prompt, char* buffer, int buflen )
 {
   char *retbuf;
@@ -381,7 +381,7 @@ CURLcode curl_setopt(CURL *curl, CURLoption option, ...)
   case CURLOPT_COOKIEFILE:
     cookiefile = (char *)va_arg(param, void *);
     if(cookiefile) {
-      data->cookies = cookie_init(cookiefile);
+      data->cookies = Curl_cookie_init(cookiefile);
     }
     break;
   case CURLOPT_WRITEHEADER:
@@ -533,50 +533,11 @@ CURLcode curl_setopt(CURL *curl, CURLoption option, ...)
   return CURLE_OK;
 }
 
-
-/*
- * Read everything until a newline.
- */
-
-int GetLine(int sockfd, char *buf, struct UrlData *data)
-{
-  int nread;
-  int read_rc=1;
-  char *ptr;
-  ptr=buf;
-
-  /* get us a full line, terminated with a newline */
-  for(nread=0;
-      (nread<BUFSIZE) && read_rc;
-      nread++, ptr++) {
-#ifdef USE_SSLEAY
-    if (data->ssl.use) {
-      read_rc = SSL_read(data->ssl.handle, ptr, 1);
-    }
-    else {
-#endif
-      read_rc = sread(sockfd, ptr, 1);
-#ifdef USE_SSLEAY
-    }
-#endif /* USE_SSLEAY */
-    if (*ptr == '\n')
-      break;
-  }
-  *ptr=0; /* zero terminate */
-
-  if(data->bits.verbose) {
-    fputs("< ", data->err);
-    fwrite(buf, 1, nread, data->err);
-    fputs("\n", data->err);
-  }
-  return nread;
-}
-
-
-#ifndef WIN32
+#if !defined(WIN32)||defined(__CYGWIN32__)
 #ifndef RETSIGTYPE
 #define RETSIGTYPE void
 #endif
+static
 RETSIGTYPE alarmfunc(int signal)
 {
   /* this is for "-ansi -Wall -pedantic" to stop complaining!   (rabe) */
@@ -585,67 +546,6 @@ RETSIGTYPE alarmfunc(int signal)
 }
 #endif
 
-CURLcode curl_write(CURLconnect *c_conn, char *buf, size_t amount,
-                   size_t *n)
-{
-  struct connectdata *conn = (struct connectdata *)c_conn;
-  struct UrlData *data;
-  size_t bytes_written;
-
-  if(!n || !conn || (conn->handle != STRUCT_CONNECT))
-    return CURLE_FAILED_INIT;
-  data = conn->data;
-
-#ifdef USE_SSLEAY
-  if (data->ssl.use) {
-    bytes_written = SSL_write(data->ssl.handle, buf, amount);
-  }
-  else {
-#endif
-#ifdef KRB4
-    if(conn->sec_complete)
-      bytes_written = sec_write(conn, conn->writesockfd, buf, amount);
-    else
-#endif
-      bytes_written = swrite(conn->writesockfd, buf, amount);
-#ifdef USE_SSLEAY
-  }
-#endif /* USE_SSLEAY */
-
-  *n = bytes_written;
-  return CURLE_OK;
-}
-
-CURLcode curl_read(CURLconnect *c_conn, char *buf, size_t buffersize,
-                   size_t *n)
-{
-  struct connectdata *conn = (struct connectdata *)c_conn;
-  struct UrlData *data;
-  size_t nread;
-
-  if(!n || !conn || (conn->handle != STRUCT_CONNECT))
-    return CURLE_FAILED_INIT;
-  data = conn->data;
-
-#ifdef USE_SSLEAY
-  if (data->ssl.use) {
-    nread = SSL_read (data->ssl.handle, buf, buffersize);
-  }
-  else {
-#endif
-#ifdef KRB4
-    if(conn->sec_complete)
-      nread = sec_read(conn, conn->sockfd, buf, buffersize);
-    else
-#endif
-      nread = sread (conn->sockfd, buf, buffersize);
-#ifdef USE_SSLEAY
-  }
-#endif /* USE_SSLEAY */
-  *n = nread;
-  return CURLE_OK;
-}
-
 CURLcode curl_disconnect(CURLconnect *c_connect)
 {
   struct connectdata *conn = c_connect;
@@ -674,17 +574,25 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
   char resumerange[40]="";
   struct UrlData *data = curl;
   struct connectdata *conn;
+  char endbracket;
 #ifdef HAVE_SIGACTION
   struct sigaction sigact;
 #endif
   int urllen;
 
+  /*************************************************************
+   * Check input data
+   *************************************************************/
+
   if(!data || (data->handle != STRUCT_OPEN))
     return CURLE_BAD_FUNCTION_ARGUMENT; /* TBD: make error codes */
 
   if(!data->url)
     return CURLE_URL_MALFORMAT;
 
+  /*************************************************************
+   * Allocate and initiate a connection struct
+   *************************************************************/
   conn = (struct connectdata *)malloc(sizeof(struct connectdata));
   if(!conn) {
     *in_connect = NULL; /* clear the pointer */
@@ -703,6 +611,9 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
 
   buf = data->buffer; /* this is our buffer */
 
+  /*************************************************************
+   * Set signal handler
+   *************************************************************/
 #ifdef HAVE_SIGACTION
   sigaction(SIGALRM, NULL, &sigact);
   sigact.sa_handler = alarmfunc;
@@ -719,9 +630,11 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
 
 #endif
 
-  /* We need to allocate memory to store the path in. We get the size of the
-     full URL to be sure, and we need to make it at least 256 bytes since
-     other parts of the code will rely on this fact */
+  /***********************************************************
+   * We need to allocate memory to store the path in. We get the size of the
+   * full URL to be sure, and we need to make it at least 256 bytes since
+   * other parts of the code will rely on this fact
+   ***********************************************************/
 #define LEAST_PATH_ALLOC 256
   urllen=strlen(data->url);
   if(urllen < LEAST_PATH_ALLOC)
@@ -731,25 +644,30 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
   if(NULL == conn->path)
     return CURLE_OUT_OF_MEMORY; /* really bad error */
 
-  /* Parse <url> */
-  /* We need to parse the url, even when using the proxy, because
-   * we will need the hostname and port in case we are trying
-   * to SSL connect through the proxy -- and we don't know if we
-   * will need to use SSL until we parse the url ...
-   */
+  /*************************************************************
+   * Parse the URL.
+   *
+   * We need to parse the url even when using the proxy, because we will need
+   * the hostname and port in case we are trying to SSL connect through the
+   * proxy -- and we don't know if we will need to use SSL until we parse the
+   * url ...
+   ************************************************************/
   if((2 == sscanf(data->url, "%64[^:]://%[^\n]",
                   conn->proto,
                   conn->path)) && strequal(conn->proto, "file")) {
-    /* we deal with file://<host>/<path> differently since it
-       supports no hostname other than "localhost" and "127.0.0.1",
-       which is unique among the protocols specified in RFC 1738 */
+    /*
+     * we deal with file://<host>/<path> differently since it supports no
+     * hostname other than "localhost" and "127.0.0.1", which is unique among
+     * the URL protocols specified in RFC 1738
+     */
+
     if (strnequal(conn->path, "localhost/", 10) ||
         strnequal(conn->path, "127.0.0.1/", 10))
-      /* ... since coincidentally both host strings are of equal length
-         otherwise, <host>/ is quietly ommitted */
+      /* If there's another host name than the one we support, <host>/ is
+       * quietly ommitted */
       strcpy(conn->path, &conn->path[10]);
 
-    strcpy(conn->proto, "file");
+    strcpy(conn->proto, "file"); /* store protocol string lowercase */
   }
   else {
     /* Set default host and default path */
@@ -760,12 +678,24 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
                    "%64[^\n:]://%256[^\n/]%[^\n]",
                    conn->proto, conn->gname, conn->path)) {
       
-      /* badly formatted, let's try the browser-style _without_ 'http://' */
+      /*
+       * The URL was badly formatted, let's try the browser-style _without_
+       * protocol specified like 'http://'.
+       */
       if((1 > sscanf(data->url, "%256[^\n/]%[^\n]",
                      conn->gname, conn->path)) ) {
+        /*
+         * We couldn't even get this format.
+         */
         failf(data, "<url> malformed");
         return CURLE_URL_MALFORMAT;
       }
+
+      /*
+       * Since there was no protocol part specified, we guess what protocol it
+       * is based on the first letters of the server name.
+       */
+
       if(strnequal(conn->gname, "FTP", 3)) {
         strcpy(conn->proto, "ftp");
       }
@@ -789,6 +719,9 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     }
   }
 
+  /*************************************************************
+   * Take care of user and password authentication stuff
+   *************************************************************/
 
   if(data->bits.user_passwd && !data->bits.use_netrc) {
     data->user[0] =0;
@@ -812,6 +745,9 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     }
   }
 
+  /*************************************************************
+   * Take care of proxy authentication stuff
+   *************************************************************/
   if(data->bits.proxy_user_passwd) {
     data->proxyuser[0] =0;
     data->proxypasswd[0]=0;
@@ -837,37 +773,43 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
 
   }
 
+  /*************************************************************
+   * Set a few convenience pointers 
+   *************************************************************/
   conn->name = conn->gname;
   conn->ppath = conn->path;
   data->hostname = conn->name;
 
 
+  /*************************************************************
+   * Detect what (if any) proxy to use
+   *************************************************************/
   if(!data->bits.httpproxy) {
     /* If proxy was not specified, we check for default proxy environment
-       variables, to enable i.e Lynx compliance:
-
-       http_proxy=http://some.server.dom:port/
-       https_proxy=http://some.server.dom:port/
-       ftp_proxy=http://some.server.dom:port/
-       gopher_proxy=http://some.server.dom:port/
-       no_proxy=domain1.dom,host.domain2.dom
-                                 (a comma-separated list of hosts which should
-                                  not be proxied, or an asterisk to override
-                                  all proxy variables)
-       all_proxy=http://some.server.dom:port/
-                                 (seems to exist for the CERN www lib. Probably
-                                  the first to check for.)
-
-       For compatibility, the all-uppercase versions of these variables are
-       checked if the lowercase versions don't exist.
+     * variables, to enable i.e Lynx compliance:
+     *
+     * http_proxy=http://some.server.dom:port/
+     * https_proxy=http://some.server.dom:port/
+     * ftp_proxy=http://some.server.dom:port/
+     * gopher_proxy=http://some.server.dom:port/
+     * no_proxy=domain1.dom,host.domain2.dom
+     *   (a comma-separated list of hosts which should
+     *   not be proxied, or an asterisk to override
+     *   all proxy variables)
+     * all_proxy=http://some.server.dom:port/
+     *   (seems to exist for the CERN www lib. Probably
+     *   the first to check for.)
+     *
+     * For compatibility, the all-uppercase versions of these variables are
+     * checked if the lowercase versions don't exist.
      */
     char *no_proxy=NULL;
     char *proxy=NULL;
     char proxy_env[128];
 
-    no_proxy=GetEnv("no_proxy");
+    no_proxy=curl_getenv("no_proxy");
     if(!no_proxy)
-      no_proxy=GetEnv("NO_PROXY");
+      no_proxy=curl_getenv("NO_PROXY");
 
     if(!no_proxy || !strequal("*", no_proxy)) {
       /* NO_PROXY wasn't specified or it wasn't just an asterisk */
@@ -899,22 +841,22 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
 	strcpy(envp, "_proxy");
 
 	/* read the protocol proxy: */
-	prox=GetEnv(proxy_env);
+	prox=curl_getenv(proxy_env);
 
 	if(!prox) {
           /* There was no lowercase variable, try the uppercase version: */
 	  for(envp = proxy_env; *envp; envp++)
 	    *envp = toupper(*envp);
-	  prox=GetEnv(proxy_env);
+	  prox=curl_getenv(proxy_env);
 	}
 
 	if(prox && *prox) { /* don't count "" strings */
 	  proxy = prox; /* use this */
 	}
 	else {
-	  proxy = GetEnv("all_proxy"); /* default proxy to use */
+	  proxy = curl_getenv("all_proxy"); /* default proxy to use */
 	  if(!proxy)
-            proxy=GetEnv("ALL_PROXY");
+            proxy=curl_getenv("ALL_PROXY");
 	}
 
         if(proxy && *proxy) {
@@ -929,13 +871,16 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
       free(no_proxy);
   } /* if not using proxy */
 
+  /*************************************************************
+   * No protocol but proxy usage needs attention
+   *************************************************************/
   if((conn->protocol&PROT_MISSING) && data->bits.httpproxy ) {
     /* We're guessing prefixes here and since we're told to use a proxy, we
        need to add the protocol prefix to the URL string before we continue!
        */
     char *reurl;
 
-    reurl = maprintf("%s://%s", conn->proto, data->url);
+    reurl = aprintf("%s://%s", conn->proto, data->url);
 
     if(!reurl)
       return CURLE_OUT_OF_MEMORY;
@@ -948,13 +893,15 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     conn->protocol &= ~PROT_MISSING; /* switch that one off again */
   }
 
-  /* RESUME on a HTTP page is a tricky business. First, let's just check that
-     'range' isn't used, then set the range parameter and leave the resume as
-     it is to inform about this situation for later use. We will then
-     "attempt" to resume, and if we're talking to a HTTP/1.1 (or later)
-     server, we will get the document resumed. If we talk to a HTTP/1.0
-     server, we just fail since we can't rewind the file writing from within
-     this function. */
+  /************************************************************
+   * RESUME on a HTTP page is a tricky business. First, let's just check that
+   * 'range' isn't used, then set the range parameter and leave the resume as
+   * it is to inform about this situation for later use. We will then
+   * "attempt" to resume, and if we're talking to a HTTP/1.1 (or later)
+   * server, we will get the document resumed. If we talk to a HTTP/1.0
+   * server, we just fail since we can't rewind the file writing from within
+   * this function.
+   ***********************************************************/
   if(data->resume_from) {
     if(!data->bits.set_range) {
       /* if it already was in use, we just skip this */
@@ -965,28 +912,28 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     }
   }
 
-
+  /*************************************************************
+   * Set timeout if that is being used
+   *************************************************************/
   if(data->timeout) {
     /* We set the timeout on the connection/resolving phase first, separately
-       from the download/upload part to allow a maximum time on everything */
+     * from the download/upload part to allow a maximum time on everything */
     myalarm(data->timeout); /* this sends a signal when the timeout fires
 			       off, and that will abort system calls */
   }
 
-  /*
-   * Hmm, if we are using a proxy, then we can skip the GOPHER and the
-   * FTP steps, although we cannot skip the HTTPS step (since the proxy
-   * works differently, depending on whether its SSL or not).
-   */
+  /*************************************************************
+   * Setup internals depending on protocol
+   *************************************************************/
 
   if (strequal(conn->proto, "HTTP")) {
     if(!data->port)
       data->port = PORT_HTTP;
     data->remote_port = PORT_HTTP;
     conn->protocol |= PROT_HTTP;
-    conn->curl_do = http;
-    conn->curl_done = http_done;
-    conn->curl_close = http_close;
+    conn->curl_do = Curl_http;
+    conn->curl_done = Curl_http_done;
+    conn->curl_close = Curl_http_close;
   }
   else if (strequal(conn->proto, "HTTPS")) {
 #ifdef USE_SSLEAY
@@ -996,10 +943,10 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     conn->protocol |= PROT_HTTP;
     conn->protocol |= PROT_HTTPS;
 
-    conn->curl_do = http;
-    conn->curl_done = http_done;
-    conn->curl_connect = http_connect;
-    conn->curl_close = http_close;
+    conn->curl_do = Curl_http;
+    conn->curl_done = Curl_http_done;
+    conn->curl_connect = Curl_http_connect;
+    conn->curl_close = Curl_http_close;
 
 #else /* USE_SSLEAY */
     failf(data, "libcurl was built with SSL disabled, https: not supported!");
@@ -1017,9 +964,9 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
 	conn->ppath = conn->path;
       }
     conn->protocol |= PROT_GOPHER;
-    conn->curl_do = http;
-    conn->curl_done = http_done;
-    conn->curl_close = http_close;
+    conn->curl_do = Curl_http;
+    conn->curl_done = Curl_http_done;
+    conn->curl_close = Curl_http_close;
   }
   else if(strequal(conn->proto, "FTP")) {
     char *type;
@@ -1032,20 +979,20 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
        !data->bits.tunnel_thru_httpproxy) {
       /* Unless we have asked to tunnel ftp operations through the proxy, we
          switch and use HTTP operations only */
-      conn->curl_do = http;
-      conn->curl_done = http_done;
-      conn->curl_close = http_close;
+      conn->curl_do = Curl_http;
+      conn->curl_done = Curl_http_done;
+      conn->curl_close = Curl_http_close;
     }
     else {
-      conn->curl_do = ftp;
-      conn->curl_done = ftp_done;
-      conn->curl_connect = ftp_connect;
+      conn->curl_do = Curl_ftp;
+      conn->curl_done = Curl_ftp_done;
+      conn->curl_connect = Curl_ftp_connect;
     }
 
     conn->ppath++; /* don't include the initial slash */
 
     /* FTP URLs support an extension like ";type=<typecode>" that
-       we'll try to get now! */
+     * we'll try to get now! */
     type=strstr(conn->ppath, ";type=");
     if(!type) {
       type=strstr(conn->gname, ";type=");
@@ -1076,8 +1023,8 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
       data->port = PORT_TELNET;
     data->remote_port = PORT_TELNET;
 
-    conn->curl_do = telnet;
-    conn->curl_done = telnet_done;
+    conn->curl_do = Curl_telnet;
+    conn->curl_done = Curl_telnet_done;
 
   }
   else if (strequal(conn->proto, "DICT")) {
@@ -1085,16 +1032,16 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     if(!data->port)
       data->port = PORT_DICT;
     data->remote_port = PORT_DICT;
-    conn->curl_do = dict;
-    conn->curl_done = dict_done;
+    conn->curl_do = Curl_dict;
+    conn->curl_done = Curl_dict_done;
   }
   else if (strequal(conn->proto, "LDAP")) {
     conn->protocol |= PROT_LDAP;
     if(!data->port)
       data->port = PORT_LDAP;
     data->remote_port = PORT_LDAP;
-    conn->curl_do = ldap;
-    conn->curl_done = ldap_done;
+    conn->curl_do = Curl_ldap;
+    conn->curl_done = Curl_ldap_done;
   }
   else if (strequal(conn->proto, "FILE")) {
     conn->protocol |= PROT_FILE;
@@ -1102,19 +1049,23 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     conn->curl_do = file;
     /* no done() function */
 
-    result = Transfer(conn, -1, -1, FALSE, NULL, /* no download */
+    result = Curl_Transfer(conn, -1, -1, FALSE, NULL, /* no download */
                       -1, NULL); /* no upload */
 
     return CURLE_OK;
   }
-
   else {
+    /* We fell through all checks and thus we don't support the specified
+       protocol */
     failf(data, "Unsupported protocol: %s", conn->proto);
     return CURLE_UNSUPPORTED_PROTOCOL;
   }
 
+  /*************************************************************
+   * .netrc scanning coming up
+   *************************************************************/
   if(data->bits.use_netrc) {
-    if(ParseNetrc(data->hostname, data->user, data->passwd)) {
+    if(Curl_parsenetrc(data->hostname, data->user, data->passwd)) {
       infof(data, "Couldn't find host %s in the .netrc file, using defaults",
             data->hostname);
     }
@@ -1131,9 +1082,9 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
   else if(!(data->bits.user_passwd) &&
 	  (conn->protocol & (PROT_FTP|PROT_HTTP)) ) {
     /* This is a FTP or HTTP URL, and we haven't got the user+password in
-       the extra parameter, we will now try to extract the possible
-       user+password pair in a string like:
-       ftp://user:password@ftp.my.site:8021/README */
+     * the extra parameter, we will now try to extract the possible
+     * user+password pair in a string like:
+     * ftp://user:password@ftp.my.site:8021/README */
     char *ptr=NULL; /* assign to remove possible warnings */
     if((ptr=strchr(conn->name, '@'))) {
       /* there's a user+password given here, to the left of the @ */
@@ -1185,18 +1136,50 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     }
   }
 
+  /*************************************************************
+   * Figure out the remote port number
+   *
+   * No matter if we use a proxy or not, we have to figure out the remote
+   * port number of various reasons.
+   *
+   * To be able to detect port number flawlessly, we must not confuse them
+   * IPv6-specified addresses in the [0::1] style.
+   *************************************************************/
+
+  if((1 == sscanf(conn->name, "[%*39[0-9a-fA-F:]%c", &endbracket)) &&
+     (']' == endbracket)) {
+    /* this is a IPv6-style specified IP-address */
+#ifndef ENABLE_IPV6
+    failf(data, "You haven't enabled IPv6 support");
+    return CURLE_URL_MALFORMAT;
+#else
+    tmp = strchr(conn->name, ']');
+
+    tmp++; /* pass the ending bracket */
+    if(':' != *tmp)
+      tmp = NULL; /* no port number available */
+#endif
+  }
+  else {
+    /* traditional IPv4-style port-extracting */
+    tmp = strchr(conn->name, ':');
+  }
+
+  if (tmp) {
+    *tmp++ = '\0'; /* cut off the name there */
+    data->remote_port = atoi(tmp);
+  }
+
+  /*************************************************************
+   * Resolve the name of the server or proxy
+   *************************************************************/
   if(!data->bits.httpproxy) {
     /* If not connecting via a proxy, extract the port from the URL, if it is
      * there, thus overriding any defaults that might have been set above. */
-    tmp = strchr(conn->name, ':');
-    if (tmp) {
-      *tmp++ = '\0';
-      data->port = atoi(tmp);
-    }
-    data->remote_port = data->port; /* it is the same port */
+    data->port =  data->remote_port; /* it is the same port */
 
     /* Connect to target host right on */
-    conn->hp = GetHost(data, conn->name, &conn->hostent_buf);
+    conn->hp = Curl_gethost(data, conn->name, &conn->hostent_buf);
     if(!conn->hp) {
       failf(data, "Couldn't resolve host '%s'", conn->name);
       return CURLE_COULDNT_RESOLVE_HOST;
@@ -1218,14 +1201,6 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
       return CURLE_OUT_OF_MEMORY;
     }
 
-    /* we use proxy all right, but we wanna know the remote port for SSL
-       reasons */
-    tmp = strchr(conn->name, ':');
-    if (tmp) {
-      *tmp++ = '\0'; /* cut off the name there */
-      data->remote_port = atoi(tmp);
-    }
-
     /* Daniel Dec 10, 1998:
        We do the proxy host string parsing here. We want the host name and the
        port name. Accept a protocol:// prefix, even though it should just be
@@ -1252,7 +1227,7 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     }
 
     /* connect to proxy */
-    conn->hp = GetHost(data, proxyptr, &conn->hostent_buf);
+    conn->hp = Curl_gethost(data, proxyptr, &conn->hostent_buf);
     if(!conn->hp) {
       failf(data, "Couldn't resolve proxy '%s'", proxyptr);
       return CURLE_COULDNT_RESOLVE_PROXY;
@@ -1260,7 +1235,7 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
 
     free(proxydup); /* free the duplicate pointer and not the modified */
   }
-  pgrsTime(data, TIMER_NAMELOOKUP);
+  Curl_pgrsTime(data, TIMER_NAMELOOKUP);
 
   data->firstsocket = socket(AF_INET, SOCK_STREAM, 0);
 
@@ -1270,20 +1245,20 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
   conn->serv_addr.sin_family = conn->hp->h_addrtype;
   conn->serv_addr.sin_port = htons(data->port);
 
-#ifndef WIN32 
+#if !defined(WIN32)||defined(__CYGWIN32__)
   /* We don't generally like checking for OS-versions, we should make this
      HAVE_XXXX based, although at the moment I don't have a decent test for
      this! */
 
-  /* sck 8/31/2000 add support for specifing device to bind socket to */
-  /* I am using this, but it may not work everywhere, only tested on
-     RedHat 6.2 */
 #ifdef HAVE_INET_NTOA
 
 #ifndef INADDR_NONE
 #define INADDR_NONE (unsigned long) ~0
 #endif
 
+  /*************************************************************
+   * Select device to bind socket to
+   *************************************************************/
   if (data->device && (strlen(data->device)<255)) {
     struct sockaddr_in sa;
     struct hostent *h=NULL;
@@ -1292,12 +1267,12 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     char myhost[256] = "";
     unsigned long in;
 
-    if(if2ip(data->device, myhost, sizeof(myhost))) {
-      h = GetHost(data, myhost, &hostdataptr);
+    if(Curl_if2ip(data->device, myhost, sizeof(myhost))) {
+      h = Curl_gethost(data, myhost, &hostdataptr);
     }
     else {
       if(strlen(data->device)>1) {
-        h = GetHost(data, data->device, &hostdataptr);
+        h = Curl_gethost(data, data->device, &hostdataptr);
       }
       if(h) {
         /* we know data->device is shorter than the myhost array */
@@ -1307,7 +1282,7 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
 
     if(! *myhost) {
       /* need to fix this
-         h=GetHost(data,
+         h=Curl_gethost(data,
          getmyhost(*myhost,sizeof(myhost)),
          hostent_buf,
          sizeof(hostent_buf));
@@ -1384,12 +1359,15 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     }
 
     if(hostdataptr)
-      free(hostdataptr); /* allocated by GetHost() */
+      free(hostdataptr); /* allocated by Curl_gethost() */
 
   } /* end of device selection support */
 #endif  /* end of HAVE_INET_NTOA */
 #endif /* end of not WIN32 */
 
+  /*************************************************************
+   * Connect to server/proxy
+   *************************************************************/
   if (connect(data->firstsocket,
               (struct sockaddr *) &(conn->serv_addr),
               sizeof(conn->serv_addr)
@@ -1439,39 +1417,52 @@ static CURLcode _connect(CURL *curl, CURLconnect **in_connect)
     return CURLE_COULDNT_CONNECT;
   }
 
+  /*************************************************************
+   * Proxy authentication
+   *************************************************************/
   if(data->bits.proxy_user_passwd) {
     char *authorization;
     snprintf(data->buffer, BUFSIZE, "%s:%s",
              data->proxyuser, data->proxypasswd);
-    if(base64_encode(data->buffer, strlen(data->buffer),
+    if(Curl_base64_encode(data->buffer, strlen(data->buffer),
                           &authorization) >= 0) {
       data->ptr_proxyuserpwd =
-        maprintf("Proxy-authorization: Basic %s\015\012", authorization);
+        aprintf("Proxy-authorization: Basic %s\015\012", authorization);
       free(authorization);
     }
   }
+
+  /*************************************************************
+   * Send user-agent to HTTP proxies even if the target protocol
+   * isn't HTTP.
+   *************************************************************/
   if((conn->protocol&PROT_HTTP) || data->bits.httpproxy) {
     if(data->useragent) {
-      data->ptr_uagent = maprintf("User-Agent: %s\015\012", data->useragent);
+      data->ptr_uagent =
+        aprintf("User-Agent: %s\015\012", data->useragent);
     }
   }
 
   if(conn->curl_connect) {
     /* is there a connect() procedure? */
-    conn->now = tvnow(); /* set this here for timeout purposes in the
-                            connect procedure, it is later set again for the
-                            progress meter purpose */
+
+    /* set start time here for timeout purposes in the
+     * connect procedure, it is later set again for the
+     * progress meter purpose */
+    conn->now = Curl_tvnow();
+
+    /* Call the protocol-specific connect function */
     result = conn->curl_connect(conn);
     if(result != CURLE_OK)
       return result; /* pass back errors */
   }
 
-  pgrsTime(data, TIMER_CONNECT); /* we're connected */
+  Curl_pgrsTime(data, TIMER_CONNECT); /* we're connected */
 
-  conn->now = tvnow(); /* time this *after* the connect is done */
+  conn->now = Curl_tvnow(); /* time this *after* the connect is done */
   conn->bytecount = 0;
   
-  /* Figure out the ip-number and the first host name it shows: */
+  /* Figure out the ip-number and display the first host name it shows: */
   {
     struct in_addr in;
     (void) memcpy(&in.s_addr, *conn->hp->h_addr_list, sizeof (in.s_addr));
@@ -1560,7 +1551,7 @@ CURLcode curl_done(CURLconnect *c_connect)
   else
     result = CURLE_OK;
 
-  pgrsDone(data); /* done with the operation */
+  Curl_pgrsDone(data); /* done with the operation */
 
   conn->state = CONN_DONE;
 

lib/url.h

@@ -22,6 +22,7 @@
  *
  * $Id$
  *****************************************************************************/
-int GetLine(int sockfd, char *buf, struct UrlData *data);
+
+/* empty */
 
 #endif

lib/urldata.h

@@ -82,8 +82,8 @@
 /* Download buffer size, keep it fairly big for speed reasons */
 #define BUFSIZE (1024*50)
 
-/* Upload buffer size, keep it smallish to get faster progress meter
-   updates. This should probably become dynamic and adjust to the upload
+/* Defaul upload buffer size, keep it smallish to get faster progress meter
+   updates. This is just default, it is dynamic and adjusts to the upload
    speed. */
 #define UPLOAD_BUFSIZE (1024*2)
 
@@ -91,10 +91,14 @@
    of need. */
 #define HEADERSIZE 256
 
+/* Just a convenience macro to get the larger value out of two given */
 #ifndef MAX
 #define MAX(x,y) ((x)>(y)?(x):(y))
 #endif
 
+/* Type of handle. All publicly returned 'handles' in the curl interface
+   have a handle first in the struct that describes what kind of handle it
+   is. Used to detect bad handle usage. */
 typedef enum {
   STRUCT_NONE,
   STRUCT_OPEN,
@@ -102,6 +106,8 @@ typedef enum {
   STRUCT_LAST
 } Handle;
 
+/* Connecting to a remote server using the curl interface is moving through
+   a state machine, this type is used to store the current state */
 typedef enum {
   CONN_NONE,  /* illegal state */
   CONN_INIT,  /* curl_connect() has been called */
@@ -112,6 +118,7 @@ typedef enum {
 } ConnState;
 
 #ifdef KRB4
+/* Types needed for krb4-ftp connections */
 struct krb4buffer {
   void *data;
   size_t size;
@@ -155,13 +162,13 @@ struct connectdata {
   char *hostent_buf; /* pointer to allocated memory for name info */
   struct hostent *hp;
   struct sockaddr_in serv_addr;
-  char proto[64];
-  char gname[256];
-  char *name;
-  char *path; /* formerly staticly this size: URL_MAX_LENGTH */
+  char proto[64];  /* store the protocol string in this buffer */
+  char gname[257]; /* store the hostname in this buffer */
+  char *name;      /* host name pointer to fool around with */
+  char *path;      /* allocated buffer to store the URL's path part in */
   char *ppath;
   long bytecount;
-  struct timeval now;
+  struct timeval now; /* current time */
 
   long upload_bufsize; /* adjust as you see fit, never bigger than BUFSIZE
                           never smaller than UPLOAD_BUFSIZE */
@@ -248,8 +255,8 @@ struct Progress {
 struct HTTP {
   struct FormData *sendit;
   int postsize;
-  char *p_pragma;
-  char *p_accept;
+  char *p_pragma;      /* Pragma: string */
+  char *p_accept;      /* Accept: string */
   long readbytecount; 
   long writebytecount;
 
@@ -264,13 +271,15 @@ struct HTTP {
  ***************************************************************************/
 struct FTP {
   long *bytecountp;
-  char *user;
-  char *passwd;
+  char *user;    /* user name string */
+  char *passwd;  /* password string */
   char *urlpath; /* the originally given path part of the URL */
   char *dir;     /* decoded directory */
   char *file;    /* decoded file */
 };
 
+/* This struct is for boolean settings that define how to behave during
+   this session. */
 struct Configbits {
   bool get_filetime;
   bool tunnel_thru_httpproxy;
@@ -313,6 +322,7 @@ typedef enum {
   CURLI_LAST
 } CurlInterface;
 
+/* struct for data related to SSL and SSL connections */
 struct ssldata {
   bool use;              /* use ssl encrypted communications TRUE/FALSE */
   long version;          /* what version the client wants to use */
@@ -468,8 +478,8 @@ struct UrlData {
   struct curl_slist *quote;     /* before the transfer */
   struct curl_slist *postquote; /* after the transfer */
 
-  TimeCond timecondition;
-  time_t timevalue;
+  TimeCond timecondition; /* kind of comparison */
+  time_t timevalue;       /* what time to compare with */
 
   char *customrequest; /* http/ftp request to use */
 
@@ -482,7 +492,7 @@ struct UrlData {
                        completion */
 #endif
 
-  struct Progress progress;
+  struct Progress progress; /* for all the progress meter data */
 
 #define MAX_CURL_USER_LENGTH 128
 #define MAX_CURL_PASSWORD_LENGTH 128
@@ -492,6 +502,7 @@ struct UrlData {
                     * host (which location-following otherwise could lead to)
                     */
 
+  /* buffers to store authentication data in */
   char user[MAX_CURL_USER_LENGTH];
   char passwd[MAX_CURL_PASSWORD_LENGTH];
   char proxyuser[MAX_CURL_USER_LENGTH];
@@ -506,7 +517,7 @@ struct UrlData {
   char *ptr_cookie; /* free later if not NULL! */
   char *ptr_host; /* free later if not NULL */
 
-  char *krb4_level;
+  char *krb4_level; /* what security level */
 #ifdef KRB4
   FILE *cmdchannel;
 #endif

lib/version.c

@@ -33,9 +33,6 @@ char *curl_version(void)
 {
   static char version[200];
   char *ptr;
-#if defined(USE_SSLEAY)
-  static char sub[2];
-#endif
   strcpy(version, LIBCURL_NAME " " LIBCURL_VERSION );
   ptr=strchr(version, '\0');
 
@@ -47,6 +44,8 @@ char *curl_version(void)
           (SSLEAY_VERSION_NUMBER>>20)&0xff,
           (SSLEAY_VERSION_NUMBER>>12)&0xf);
 #else
+  {
+    char sub[2];
     if(SSLEAY_VERSION_NUMBER&0x0f) {
       sub[0]=(SSLEAY_VERSION_NUMBER&0x0f) + 'a' -1;
     }
@@ -57,13 +56,23 @@ char *curl_version(void)
             (SSLEAY_VERSION_NUMBER>>12)&0xff,
             (SSLEAY_VERSION_NUMBER>>8)&0xf,
             (SSLEAY_VERSION_NUMBER>>4)&0xf, sub);
-
+  }
 #endif
   ptr=strchr(ptr, '\0');
 #endif
 
+#if defined(KRB4) || defined(ENABLE_IPV6)
+  strcat(ptr, " (");
+  ptr+=2;
 #ifdef KRB4
-  sprintf(ptr, " (krb4 enabled)");
+  sprintf(ptr, "krb4 ");
+  ptr += strlen(ptr);
+#endif
+#ifdef ENABLE_IPV6
+  sprintf(ptr, "ipv6 ");
+  ptr += strlen(ptr);
+#endif
+  sprintf(ptr, "enabled)");
   ptr += strlen(ptr);
 #endif
 

maketgz

@@ -58,29 +58,10 @@ findprog()
 
 ############################################################################
 #
-# If we have autoconf we can just as well update configure.in to contain our
-# brand new version number:
+# Enforce a rerun of configure (updates the VERSION)
 #
 
-#if { findprog autoconf >/dev/null 2>/dev/null; } then
-#  echo "- No autoconf found, we leave configure as it is"
-#else
-#  # Replace version number in configure.in file:
-#
-#  CONF="configure.in"
-#
-#  sed 's/^AM_INIT_AUTOMAKE.*/AM_INIT_AUTOMAKE(curl,"'$version'")/g' $CONF >$CONF.new
-#
-#  # Save old  file
-#  cp -p $CONF $CONF.old
-#
-#  # Make new configure.in
-#  mv $CONF.new $CONF
-# 
-#  # Update the configure script
-#  echo "Runs autoconf"
-#  autoconf
-#fi
+./config.status --recheck
 
 ############################################################################
 #
@@ -97,65 +78,7 @@ fi
 
 ############################################################################
 #
-# Now run make first to make the file dates decent and make sure that it
-# compiles just before release!
+# Now run make dist
 #
 
-make
-
-# get current dir
-dir=`pwd`
-
-# Get basename
-orig=`basename $dir`
-
-# Get the left part of the dash (-)
-new=`echo $orig | cut -d- -f1`
-
-# Build new directory name
-n=$new-$version;
-
-# Tell the world what we're doing
-echo "Copying files into distribution archive";
-
-if [ -r $n ]; then
-  echo "Directory already exists!"
-  exit
-fi
-
-# Create the new dir
-mkdir $n
-
-# Copy all relevant files, with path and permissions!
-tar -cf - `cat FILES` | (cd $n; tar -xBpf -)
-
-# Create the distribution root Makefile from Makefile.dist
-cp -p Makefile.dist $n/Makefile
-
-############################################################################
-#
-# Replace @SHELL@ with /bin/sh in the Makefile.in files!
-#
-echo "Replace @SHELL@ with /bin/sh in the Makefile.in files"
-temp=/tmp/curl$$
-for file in Makefile.in lib/Makefile.in src/Makefile.in; do
-  in="$n/$file"
-  sed "s:@SHELL@:/bin/sh:g" $in >$temp
-  cp $temp $in
-done
-rm -rf $temp
-
-# Tell the world what we're doing
-echo "creates $n.tar.gz";
-
-# Make a tar archive of it all
-tar -cvf $n.tar $n
-
-# gzip the archive
-gzip $n.tar
-
-# Make it world readable
-chmod a+r $n.tar.gz ;
-
-# Delete the temp dir
-rm -rf $n
+make dist

memanalyze.pl

@@ -26,13 +26,17 @@ while(<STDIN>) {
 
         if($function =~ /free\(0x([0-9a-f]*)/) {
             $addr = $1;
-            if($sizeataddr{$addr} <= 0) {
+            if($sizeataddr{$addr} == 0) {
                 print "FREE ERROR: No memory allocated: $line\n";
             }
+            elsif(-1 == $sizeataddr{$addr}) {
+                print "FREE ERROR: Memory freed twice: $line\n";
+                print "FREE ERROR: Previously freed at: ".$getmem{$addr}."\n";
+            }
             else {
                 $totalmem -= $sizeataddr{$addr};
-                $sizeataddr{$addr}=0;
-                $getmem{$addr}=""; # forget after a good free()
+                $sizeataddr{$addr}=-1; # set -1 to mark as freed
+                $getmem{$addr}="$source:$linenum";
             }
         }
         elsif($function =~ /malloc\((\d*)\) = 0x([0-9a-f]*)/) {

packages/Linux/Makefile.am

@@ -0,0 +1 @@
+SUBDIRS = RPM

packages/Linux/RPM/Makefile.am

@@ -0,0 +1,2 @@
+EXTRA_DIST = README curl-ssl.spec.in curl.spec.in make_curl_rpm
+

packages/Linux/RPM/curl-ssl.spec

@@ -1,98 +0,0 @@
-%define ver	7.4.2
-%define rel	1
-%define prefix	/usr
-
-Summary:	get a file from a FTP, GOPHER or HTTP server.
-Name:		curl-ssl
-Version:	%ver
-Release:	%rel
-Copyright:	MPL
-Group:		Utilities/Console
-Source:		curl-%{version}.tar.gz
-URL:		http://curl.haxx.se
-BuildPrereq:	openssl
-BuildRoot:	/tmp/%{name}-%{version}-%{rel}-root
-Packager:	Fill In As You Wish
-Docdir:		%{prefix}/doc
-
-%description
-curl-ssl is a client to get documents/files from servers, using 
-any of the supported protocols.  The command is designed to 
-work without user interaction or any kind of interactivity.
-
-curl-ssl offers a busload of useful tricks like proxy support, 
-user authentication, ftp upload, HTTP post, file transfer 
-resume and more.
-
-Note: this version is compiled with SSL (https:) support.
-
-Authors:
-	Daniel Stenberg <daniel@haxx.se>
-
-
-%prep
-%setup -n %{name}-%{version}
-
-
-%build
-# Needed for snapshot releases.
-if [ ! -f configure ]; then
-	CONF="./autogen.sh"
-else
-	CONF="./configure"
-fi
-
-#
-# Configuring the package
-#
-CFLAGS="${RPM_OPT_FLAGS}" ${CONF}	\
-	--prefix=%{prefix}		\
-	--with-ssl
-
-
-[ "$SMP" != "" ] && JSMP = '"MAKE=make -k -j $SMP"'
-
-make ${JSMP} CFLAGS="-DUSE_SSLEAY -I/usr/include/openssl";
-
-
-%install
-[ -d ${RPM_BUILD_ROOT} ] && rm -rf ${RPM_BUILD_ROOT}
-
-make prefix=${RPM_BUILD_ROOT}%{prefix} install-strip
-
-#
-# Generating file lists and store them in file-lists
-# Starting with the directory listings
-#
-find ${RPM_BUILD_ROOT}%{prefix}/{bin,lib,man} -type d | sed "s#^${RPM_BUILD_ROOT}#\%attr (-\,root\,root) \%dir #" > file-lists
-
-#
-# Then, the file listings
-#
-echo "%defattr (-, root, root)" >> file-lists
-find ${RPM_BUILD_ROOT}%{prefix} -type f | sed -e "s#^${RPM_BUILD_ROOT}##g" >> file-lists
-
-
-%clean
-(cd ..; rm -rf curl-7.4.2 ${RPM_BUILD_ROOT})
-
-
-%files -f file-lists
-%defattr (-, root, root)
-%doc BUGS
-%doc CHANGES
-%doc CONTRIBUTE
-%doc FAQ
-%doc FEATURES
-%doc FILES
-%doc INSTALL
-%doc LEGAL
-%doc MPL-1.0.txt
-%doc README
-%doc README.curl
-%doc README.libcurl
-%doc RESOURCES
-%doc TODO
-%doc %{name}-ssl.spec.in
-%doc %{name}.spec.in
-

packages/Linux/RPM/curl-ssl.spec.in

@@ -0,0 +1,78 @@
+%define name curl-ssl
+%define tarball curl
+%define version @VERSION@
+%define release 1
+%define prefix /usr
+
+%define builddir $RPM_BUILD_DIR/%{tarball}-%{version}
+
+Summary: get a file from a FTP, GOPHER or HTTP server.
+Name: %{name}
+Version: %{version}
+Release: %{release}
+Copyright: MPL
+Vendor: Daniel Stenberg <Daniel.Stenberg@haxx.se>
+Packager: Loic Dachary <loic@senga.org>
+Group: Utilities/Console
+Source: %{tarball}-%{version}.tar.gz
+URL: http://curl.haxx.se/
+BuildRoot: /tmp/%{tarball}-%{version}-root
+Requires: openssl >= 0.9.5
+
+%description
+curl is a client to get documents/files from servers, using any of the
+supported protocols. The command is designed to work without user
+interaction or any kind of interactivity.
+
+curl offers a busload of useful tricks like proxy support, user
+authentication, ftp upload, HTTP post, file transfer resume and more.
+
+%package	devel
+Summary:	The includes, libs, and man pages to develop with libcurl
+Group:		Development/Libraries
+Requires:	openssl-devel >= 0.9.5
+
+%description devel
+libcurl is the core engine of curl; this packages contains all the libs,
+headers, and manual pages to develop applications using libcurl.
+
+%prep
+rm -rf %{builddir}
+
+%setup -n %{tarball}-%{version} 
+
+%build
+%configure --prefix=%{prefix} --with-ssl
+make 
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make DESTDIR=$RPM_BUILD_ROOT install-strip
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+rm -rf %{builddir}
+
+%post
+/sbin/ldconfig
+
+%postun
+/sbin/ldconfig
+
+%files
+%defattr(-,root,root)
+%attr(0755,root,root) %{_bindir}/curl
+%attr(0644,root,root) %{_mandir}/man1/*
+%{_libdir}/libcurl.so*
+%doc CHANGES LEGAL MITX.txt MPL-1.1.txt README docs/BUGS
+%doc docs/CONTRIBUTE docs/FAQ docs/FEATURES docs/INSTALL docs/INTERNALS
+%doc docs/LIBCURL docs/MANUAL docs/README* docs/RESOURCES docs/TODO
+%doc docs/TheArtOfHttpScripting
+
+%files devel
+%defattr(-,root,root)
+%attr(0644,root,root) %{_mandir}/man3/*
+%attr(0644,root,root) %{_includedir}/curl/*
+%{_libdir}/libcurl.a
+%{_libdir}/libcurl.la
+%doc docs/examples/*

packages/Linux/RPM/curl.spec

@@ -1,96 +0,0 @@
-%define ver	7.4.2
-%define rel	1
-%define prefix	/usr
-
-Summary:	get a file from a FTP, GOPHER or HTTP server.
-Name:		curl
-Version:	%ver
-Release:	%rel
-Copyright:	MPL
-Group:		Utilities/Console
-Source:		%{name}-%{version}.tar.gz
-URL:		http://curl.haxx.se
-BuildRoot:	/tmp/%{name}-%{version}-%{rel}-root
-Packager:	Fill In As You Wish
-Docdir:		%{prefix}/doc
-
-%description
-curl is a client to get documents/files from servers, using 
-any of the supported protocols.  The command is designed to 
-work without user interaction or any kind of interactivity.
-
-curl offers a busload of useful tricks like proxy support, 
-user authentication, ftp upload, HTTP post, file transfer 
-resume and more.
-
-Note: this version is compiled without SSL (https:) support.
-
-Authors:
-	Daniel Stenberg <daniel@haxx.se>
-
-
-%prep
-%setup -n %{name}-%{version}
-
-
-%build
-# Needed for snapshot releases.
-if [ ! -f configure ]; then
-	CONF="./autogen.sh"
-else
-	CONF="./configure"
-fi
-
-#
-# Configuring the package
-#
-CFLAGS="${RPM_OPT_FLAGS}" ${CONF}	\
-	--prefix=%{prefix}
-
-
-[ "$SMP" != "" ] && JSMP = '"MAKE=make -k -j $SMP"'
-
-make ${JSMP};
-
-
-%install
-[ -d ${RPM_BUILD_ROOT} ] && rm -rf ${RPM_BUILD_ROOT}
-
-make prefix=${RPM_BUILD_ROOT}%{prefix} install-strip
-
-#
-# Generating file lists and store them in file-lists
-# Starting with the directory listings
-#
-find ${RPM_BUILD_ROOT}%{prefix}/{bin,lib,man} -type d | sed "s#^${RPM_BUILD_ROOT}#\%attr (-\,root\,root) \%dir #" > file-lists
-
-#
-# Then, the file listings
-#
-echo "%defattr (-, root, root)" >> file-lists
-find ${RPM_BUILD_ROOT}%{prefix} -type f | sed -e "s#^${RPM_BUILD_ROOT}##g" >> file-lists
-
-
-%clean
-(cd ..; rm -rf %{name}-%{version} ${RPM_BUILD_ROOT})
-
-
-%files -f file-lists
-%defattr (-, root, root)
-%doc BUGS
-%doc CHANGES
-%doc CONTRIBUTE
-%doc FAQ
-%doc FEATURES
-%doc FILES
-%doc INSTALL
-%doc LEGAL
-%doc MPL-1.0.txt
-%doc README
-%doc README.curl
-%doc README.libcurl
-%doc RESOURCES
-%doc TODO
-%doc %{name}-ssl.spec.in
-%doc %{name}.spec.in
-

packages/Linux/RPM/curl.spec.in

@@ -0,0 +1,84 @@
+%define name curl
+%define version @VERSION@
+%define release 1
+%define prefix /usr
+
+%define builddir $RPM_BUILD_DIR/%{name}-%{version}
+
+Summary: get a file from a FTP, GOPHER or HTTP server.
+Name: %{name}
+Version: %{version}
+Release: %{release}
+Copyright: MPL
+Vendor: Daniel Stenberg <Daniel.Stenberg@haxx.se>
+Packager: Loic Dachary <loic@senga.org>
+Group: Utilities/Console
+Source: %{name}-%{version}.tar.gz
+URL: http://curl.haxx.se/
+BuildRoot: /tmp/%{name}-%{version}-root
+
+%description
+curl is a client to get documents/files from servers, using any of the
+supported protocols. The command is designed to work without user
+interaction or any kind of interactivity.
+
+curl offers a busload of useful tricks like proxy support, user
+authentication, ftp upload, HTTP post, file transfer resume and more.
+
+Note: this version is compiled without SSL (https:) support.
+
+%package	devel
+Summary:	The includes, libs, and man pages to develop with libcurl
+Group:		Development/Libraries
+
+%description devel
+libcurl is the core engine of curl; this packages contains all the libs,
+headers, and manual pages to develop applications using libcurl.
+
+%prep
+rm -rf %{builddir}
+
+%setup
+
+%build
+%configure --without-ssl --prefix=%{prefix}
+make 
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make DESTDIR=$RPM_BUILD_ROOT install-strip
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+rm -rf %{builddir}
+
+%post
+/sbin/ldconfig
+
+%postun
+/sbin/ldconfig
+
+%files
+%defattr(-,root,root)
+%attr(0755,root,root) %{_bindir}/curl
+%attr(0644,root,root) %{_mandir}/man1/*
+%{prefix}/lib/libcurl.so*
+%doc CHANGES LEGAL MITX.txt MPL-1.1.txt README docs/BUGS
+%doc docs/CONTRIBUTE docs/FAQ docs/FEATURES docs/INSTALL docs/INTERNALS
+%doc docs/LIBCURL docs/MANUAL docs/README* docs/RESOURCES docs/TODO
+%doc docs/TheArtOfHttpScripting
+
+%files devel
+%defattr(-,root,root)
+%attr(0644,root,root) %{_mandir}/man3/*
+%attr(0644,root,root) %{_includedir}/curl/*
+%{prefix}/lib/libcurl.a
+%{prefix}/lib/libcurl.la
+%doc docs/examples/*
+
+%changelog
+* Sun Jan  7 2001 Loic Dachary  <loic@senga.org>
+
+        - use _mandir instead of prefix to locate man pages because
+	  _mandir is not always prefix/man/man?.
+

packages/Makefile.am

@@ -0,0 +1 @@
+SUBDIRS = Win32 Linux

packages/Win32/Makefile.am

@@ -0,0 +1 @@
+EXTRA_DIST = README

src/Makefile.am

@@ -10,17 +10,24 @@ INCLUDES = -I$(top_srcdir)/include
 
 bin_PROGRAMS = curl #memtest
 
+noinst_HEADERS = setup.h \
+	config-win32.h \
+	urlglob.h \
+	version.h \
+	writeout.h
+
 #memtest_SOURCES = memtest.c
 #memtest_LDADD = $(top_srcdir)/lib/libcurl.la
 
 curl_SOURCES = main.c hugehelp.c urlglob.c writeout.c
-curl_LDADD = $(top_srcdir)/lib/libcurl.la
-curl_DEPENDENCIES = $(top_srcdir)/lib/libcurl.la
+curl_LDADD = ../lib/libcurl.la
+curl_DEPENDENCIES = ../lib/libcurl.la
 BUILT_SOURCES = hugehelp.c
 CLEANFILES = hugehelp.c
 NROFF=@NROFF@
 
-EXTRA_DIST = mkhelp.pl Makefile.vc6
+EXTRA_DIST = mkhelp.pl config-win32.h \
+	Makefile.vc6 Makefile.b32 Makefile.m32
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 

src/main.c

@@ -39,7 +39,6 @@
 #include "writeout.h"
 
 #define CURLseparator	"--_curl_--"
-#define MIMEseparator	"_curl_"
 
 /* This define make use of the "Curlseparator" as opposed to the
    MIMEseparator. We might add support for the latter one in the
@@ -49,7 +48,7 @@
 /* This is now designed to have its own local setup.h */
 #include "setup.h"
 
-#ifdef WIN32
+#if defined(WIN32)&&!defined(__CYGWIN32__)
 #include <winsock.h>
 #endif
 
@@ -222,6 +221,20 @@ static void helpf(char *fmt, ...)
   fprintf(stderr, "curl: try 'curl --help' for more information\n");
 }
 
+/*
+ * A chain of these nodes contain URL to get and where to put the URL's
+ * contents.
+ */
+struct getout {
+  struct getout *next;
+  char *url;
+  char *outfile;
+  int flags;
+};
+#define GETOUT_OUTFILE (1<<0) /* set when outfile is deemed done */
+#define GETOUT_URL     (1<<1) /* set when URL is deemed done */
+#define GETOUT_USEREMOTE (1<<2) /* use remote file name locally */
+
 static void help(void)
 {
   printf(CURL_ID "%s\n"
@@ -231,7 +244,6 @@ static void help(void)
        " -A/--user-agent <string> User-Agent to send to server (H)\n"
        " -b/--cookie <name=string/file> Cookie string or file to read cookies from (H)\n"
        " -B/--use-ascii     Use ASCII/text transfer\n"
-       " -c/--continue      Resume a previous transfer where we left it\n"
        " -C/--continue-at <offset> Specify absolute resume offset\n"
        " -d/--data <data>   HTTP POST data (H)\n"
        "    --data-ascii <data>   HTTP POST ASCII data (H)\n"
@@ -242,7 +254,7 @@ static void help(void)
        "    --cacert <file> CA certifciate to verify peer against (HTTPS)\n"
        " -f/--fail          Fail silently (no output at all) on errors (H)\n"
        " -F/--form <name=content> Specify HTTP POST data (H)\n"
-
+       " -g/--globoff       Disable URL sequences and ranges using {} and []\n"
        " -h/--help          This help text\n"
        " -H/--header <line> Custom header to pass to server. (H)\n"
        " -i/--include       Include the HTTP-header in the output (H)\n"
@@ -265,8 +277,8 @@ static void help(void)
        " -r/--range <range> Retrieve a byte range from a HTTP/1.1 or FTP server\n"
        " -s/--silent        Silent mode. Don't output anything\n"
        " -S/--show-error    Show error. With -s, make curl show errors when they occur\n"
-       " -t/--upload        Transfer/upload stdin to remote site\n"
        " -T/--upload-file <file> Transfer/upload <file> to remote site\n"
+       "    --url <URL>     Another way to specify URL to work with\n"
        " -u/--user <user[:password]> Specify user and password to use\n"
        " -U/--proxy-user <user[:password]> Specify Proxy authentication\n"
        " -v/--verbose       Makes the operation more talkative\n"
@@ -303,9 +315,7 @@ struct Configurable {
   char *referer;
   long timeout;
   long maxredirs;
-  char *outfile;
   char *headerfile;
-  char remotefile;
   char *ftpport;
   char *iface;
   unsigned short porttouse;
@@ -320,7 +330,13 @@ struct Configurable {
   bool configread;
   bool proxytunnel;
   long conf;
-  char *url;
+
+  struct getout *url_list; /* point to the first node */
+  struct getout *url_last; /* point to the last/current node */
+
+  struct getout *url_get;  /* point to the node to fill in URL */
+  struct getout *url_out;  /* point to the node to fill in outfile */
+
   char *cert;
   char *cacert;
   char *cert_passwd;
@@ -330,6 +346,7 @@ struct Configurable {
   char *krb4level;
   bool progressmode;
   bool nobuffer;
+  bool globoff;
 
   char *writeout; /* %-styled format string to output */
 
@@ -426,6 +443,46 @@ static char *file2memory(FILE *file, long *size)
     return NULL; /* no string */
 }
 
+void clean_getout(struct Configurable *config)
+{
+  struct getout *node=config->url_list;
+  struct getout *next;
+
+  while(node) {
+    next = node->next;
+    if(node->url)
+      free(node->url);
+    if(node->outfile)
+      free(node->outfile);
+    free(node);
+
+    node = next; /* GOTO next */
+  }
+}
+
+struct getout *new_getout(struct Configurable *config)
+{
+  struct getout *node =malloc(sizeof(struct getout));
+  struct getout *last= config->url_last;
+  if(node) {
+    /* clear the struct */
+    memset(node, 0, sizeof(struct getout));
+        
+    /* append this new node last in the list */
+    if(last)
+      last->next = node;
+    else
+      config->url_list = node; /* first node */
+            
+    /* move the last pointer */
+    config->url_last = node;
+  }
+  return node;
+}
+
+
+
+
 typedef enum {
   PARAM_OK,
   PARAM_OPTION_AMBIGUOUS,
@@ -453,6 +510,8 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
   time_t now;
   int hit=-1;
   bool longopt=FALSE;
+  bool singleopt=FALSE; /* when true means '-o foo' used '-ofoo' */
+
 
   /* single-letter,
      long-name,
@@ -483,7 +542,7 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
     {"Ea", "cacert",     TRUE},
     {"f", "fail",        FALSE},
     {"F", "form",        TRUE},
-
+    {"g", "globoff",     FALSE},
     {"h", "help",        FALSE},
     {"H", "header",      TRUE},
     {"i", "include",     FALSE},
@@ -583,7 +642,11 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
     if(hit < 0) {
       return PARAM_OPTION_UNKNOWN;
     }    
-    if((!nextarg || !*nextarg) && aliases[hit].extraparam) {
+    if(!longopt && aliases[hit].extraparam && parse[1]) {
+      nextarg=&parse[1]; /* this is the actual extra parameter */
+      singleopt=TRUE;   /* don't loop anymore after this */
+    }
+    else if((!nextarg || !*nextarg) && aliases[hit].extraparam) {
       return PARAM_REQUIRES_PARAMETER;
     }
     else if(nextarg && aliases[hit].extraparam)
@@ -610,7 +673,30 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
       break;
     case '5':
       /* the URL! */
-      GetStr(&config->url, nextarg);
+      {
+        struct getout *url;
+        if(config->url_get || (config->url_get=config->url_list)) {
+          /* there's a node here, if it already is filled-in continue to find
+             an "empty" node */
+          while(config->url_get && (config->url_get->flags&GETOUT_URL))
+            config->url_get = config->url_get->next;
+        }
+
+        /* now there might or might not be an available node to fill in! */
+
+        if(config->url_get)
+          /* existing node */
+          url = config->url_get;
+        else
+          /* there was no free node, create one! */
+          url=new_getout(config);
+
+        if(url) {
+          /* fill in the URL */
+          GetStr(&url->url, nextarg);
+          url->flags |= GETOUT_URL;
+        }
+      }
       break;
     case '#': /* added 19990617 larsa */
       config->progressmode ^= CURL_PROGRESS_BAR;
@@ -690,7 +776,7 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
           /* we already have a string, we append this one
              with a separating &-letter */
           char *oldpost=config->postfields;
-          config->postfields=maprintf("%s&%s", oldpost, postdata);
+          config->postfields=aprintf("%s&%s", oldpost, postdata);
           free(oldpost);
           free(postdata);
         }
@@ -749,6 +835,10 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
         return PARAM_BAD_USE;
       break;
 
+    case 'g': /* g disables URLglobbing */
+      config->globoff ^= TRUE;
+      break;
+
     case 'h': /* h for help */
       help();
       return PARAM_HELP_REQUESTED;
@@ -794,12 +884,37 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
       config->nobuffer ^= 1;
       break;
     case 'o':
-      /* output file */
-      GetStr(&config->outfile, nextarg); /* write to this file */
-      break;
     case 'O':
       /* output file */
-      config->remotefile ^= TRUE;
+      {
+        struct getout *url;
+        if(config->url_out || (config->url_out=config->url_list)) {
+          /* there's a node here, if it already is filled-in continue to find
+             an "empty" node */
+          while(config->url_out && (config->url_out->flags&GETOUT_OUTFILE))
+            config->url_out = config->url_out->next;
+        }
+
+        /* now there might or might not be an available node to fill in! */
+
+        if(config->url_out)
+          /* existing node */
+          url = config->url_out;
+        else
+          /* there was no free node, create one! */
+          url=new_getout(config);
+
+        if(url) {
+          /* fill in the outfile */
+          if('o' == letter)
+            GetStr(&url->outfile, nextarg);
+          else {
+            url->outfile=NULL; /* leave it */
+            url->flags |= GETOUT_USEREMOTE;
+          }
+          url->flags |= GETOUT_OUTFILE;
+        }
+      }
       break;
     case 'P':
       /* This makes the FTP sessions use PORT instead of PASV */
@@ -951,7 +1066,7 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
     }
     hit = -1;
 
-  } while(*++parse && !*usedarg);
+  } while(!singleopt && *++parse && !*usedarg);
 
   return PARAM_OK;
 }
@@ -1253,8 +1368,6 @@ void progressbarinit(struct ProgressData *bar)
 
 void free_config_fields(struct Configurable *config)
 {
-  if(config->url)
-    free(config->url);
   if(config->userpwd)
     free(config->userpwd);
   if(config->postfields)
@@ -1271,8 +1384,6 @@ void free_config_fields(struct Configurable *config)
     free(config->krb4level);
   if(config->headerfile)
     free(config->headerfile);
-  if(config->outfile)
-    free(config->outfile);
   if(config->ftpport)
     free(config->ftpport);
   if(config->infile)
@@ -1300,13 +1411,15 @@ operate(struct Configurable *config, int argc, char *argv[])
   char errorbuffer[CURL_ERROR_SIZE];
   char useragent[128]; /* buah, we don't want a larger default user agent */
   struct ProgressData progressbar;
+  struct getout *urlnode;
+  struct getout *nextnode;
 
   struct OutStruct outs;
   struct OutStruct heads;
 
   char *url = NULL;
 
-  URLGlob *urls;
+  URLGlob *urls=NULL;
   int urlnum;
   char *outfiles;
   int separator = 0;
@@ -1323,9 +1436,6 @@ operate(struct Configurable *config, int argc, char *argv[])
   int res;
   int i;
 
-  outs.stream = stdout;
-  outs.config = config;
-
 #ifdef MALLOCDEBUG
   /* this sends all memory debug messages to a logfile named memdump */
   curl_memdebug("memdump");
@@ -1356,7 +1466,7 @@ operate(struct Configurable *config, int argc, char *argv[])
       return res;
   }
 
-  if ((argc < 2)  && !config->url) {
+  if ((argc < 2)  && !config->url_list) {
     helpf(NULL);
     return CURLE_FAILED_INIT;
   }
@@ -1397,6 +1507,7 @@ operate(struct Configurable *config, int argc, char *argv[])
             /* no text */
             break;
           }
+          clean_getout(config);
 	  return CURLE_FAILED_INIT;
         }
 
@@ -1405,20 +1516,15 @@ operate(struct Configurable *config, int argc, char *argv[])
       }
     }
     else {
-      if(url) {
-	helpf("only one URL is supported!\n");
-	return CURLE_FAILED_INIT;
-      }
-      url = argv[i];
+      bool used;
+      /* just add the URL please */
+      res = getparameter("--url", argv[i], &used, config);
+      if(res)
+        return res;
     }
   }
 
-  /* if no URL was specified and there was one in the config file, get that
-     one */
-  if(!url && config->url)
-    url = config->url;
-  
-  if(!url) {
+  if(!config->url_list) {
     helpf("no URL specified!\n");
     return CURLE_FAILED_INIT;
   }
@@ -1430,44 +1536,62 @@ operate(struct Configurable *config, int argc, char *argv[])
   }
   else
     allocuseragent = TRUE;
-#if 0
-  fprintf(stderr, "URL: %s PROXY: %s\n", url, config->proxy?config->proxy:"none");
-#endif
 
-  /* expand '{...}' and '[...]' expressions and return total number of URLs
-     in pattern set */
+  urlnode = config->url_list;
+
+  /* loop through the list of given URLs */
+  while(urlnode) {
+
+    /* get the full URL (it might be NULL) */
+    url=urlnode->url;
+
+    if(NULL == url) {
+      /* This node had no URL, skip it and continue to the next */
+      if(urlnode->outfile)
+        free(urlnode->outfile);
+    
+      /* move on to the next URL */
+      nextnode=urlnode->next;
+      free(urlnode); /* free the node */
+      urlnode = nextnode;
+      continue; /* next please */
+    }
+
+    /* default output stream is stdout */
+    outs.stream = stdout;
+    outs.config = config;
+
+    if(!config->globoff) {
+      /* Unless explicitly shut off, we expand '{...}' and '[...]' expressions
+         and return total number of URLs in pattern set */
       res = glob_url(&urls, url, &urlnum);
       if(res != CURLE_OK)
         return res;
+    }
 
-  /* save outfile pattern befor expansion */
-  outfiles = config->outfile?strdup(config->outfile):NULL;
 
-  if (!outfiles && !config->remotefile && urlnum > 1) {
-#ifdef CURL_SEPARATORS
+    /* save outfile pattern before expansion */
+    outfiles = urlnode->outfile?strdup(urlnode->outfile):NULL;
+
+    if ((!outfiles || strequal(outfiles, "-")) && urlnum > 1) {
       /* multiple files extracted to stdout, insert separators! */
       separator = 1;
-#endif
-#ifdef MIME_SEPARATORS
-    /* multiple files extracted to stdout, insert MIME separators! */
-    separator = 1;
-    printf("MIME-Version: 1.0\n");
-    printf("Content-Type: multipart/mixed; boundary=%s\n\n", MIMEseparator);
-#endif
-  }
-  for (i = 0; (url = next_url(urls)); ++i) {
-    if (config->outfile) {
-      free(config->outfile);
-      config->outfile = outfiles?strdup(outfiles):NULL;
     }
+    for(i = 0;
+        (url = urls?next_url(urls):(i?NULL:strdup(url)));
+        i++) {
+      char *outfile;
+      outfile = outfiles?strdup(outfiles):NULL;
+ 
+      if((urlnode->flags&GETOUT_USEREMOTE) ||
+         (outfile && !strequal("-", outfile)) ) {
 
-    if (config->outfile || config->remotefile) {
         /* 
          * We have specified a file name to store the result in, or we have
          * decided we want to use the remote file name.
          */
       
-      if(!config->outfile && config->remotefile) {
+        if(!outfile) {
           /* Find and get the remote file name */
           char * pc =strstr(url, "://");
           if(pc)
@@ -1475,25 +1599,26 @@ operate(struct Configurable *config, int argc, char *argv[])
           else
             pc=url;
           pc = strrchr(pc, '/');
-        config->outfile = (char *) NULL == pc ? NULL : strdup(pc+1) ;
-        if(!config->outfile || !strlen(config->outfile)) {
+          outfile = (char *) NULL == pc ? NULL : strdup(pc+1) ;
+          if(!outfile) {
             helpf("Remote file name has no length!\n");
             return CURLE_WRITE_ERROR;
           }
         }
-      else {
+        else if(urls) {
           /* fill '#1' ... '#9' terms from URL pattern */
-        char *outfile = config->outfile;
-        config->outfile = match_url(config->outfile, urls);
-        free(outfile);
+          char *storefile = outfile;
+          outfile = match_url(storefile, urls);
+          free(storefile);
         }
       
         if((0 == config->resume_from) && config->use_resume) {
-        /* we're told to continue where we are now, then we get the size of the
-           file as it is now and open it for append instead */
+          /* we're told to continue where we are now, then we get the size of
+             the file as it is now and open it for append instead */
+
           struct stat fileinfo;
 
-        if(0 == stat(config->outfile, &fileinfo)) {
+          if(0 == stat(outfile, &fileinfo)) {
             /* set offset to current file size: */
             config->resume_from = fileinfo.st_size;
           }
@@ -1502,14 +1627,14 @@ operate(struct Configurable *config, int argc, char *argv[])
       
         if(config->resume_from) {
           /* open file for output: */
-        outs.stream=(FILE *) fopen(config->outfile, config->resume_from?"ab":"wb");
+          outs.stream=(FILE *) fopen(outfile, config->resume_from?"ab":"wb");
           if (!outs.stream) {
-          helpf("Can't open '%s'!\n", config->outfile);
+            helpf("Can't open '%s'!\n", outfile);
             return CURLE_WRITE_ERROR;
           }
         }
         else {
-        outs.filename = config->outfile;
+          outs.filename = outfile;
           outs.stream = NULL; /* open when needed */
         }
       }
@@ -1527,8 +1652,9 @@ operate(struct Configurable *config, int argc, char *argv[])
           ptr=url;
         ptr = strrchr(ptr, '/');
         if(!ptr || !strlen(++ptr)) {
-        /* The URL has no file name part, add the local file name. In order to
-           be able to do so, we have to create a new URL in another buffer.*/
+          /* The URL has no file name part, add the local file name. In order
+             to be able to do so, we have to create a new URL in another
+             buffer.*/
 
           urlbuffer=(char *)malloc(strlen(url) + strlen(config->infile) + 3);
           if(!urlbuffer) {
@@ -1579,23 +1705,16 @@ operate(struct Configurable *config, int argc, char *argv[])
 
       if (urlnum > 1) {
         fprintf(stderr, "\n[%d/%d]: %s --> %s\n",
-              i+1, urlnum, url, config->outfile ? config->outfile : "<stdout>");
-      if (separator) {
-#ifdef CURL_SEPARATORS
+                i+1, urlnum, url, outfile ? outfile : "<stdout>");
+        if (separator)
           printf("%s%s\n", CURLseparator, url);
-#endif
-#ifdef MIME_SEPARATORS
-        printf("--%s\n", MIMEseparator);
-        printf("Content-ID: %s\n\n", url); 
-#endif
-      }
       }
 
       if(!config->errors)
         config->errors = stderr;
 
-#ifdef WIN32
-    if(!config->outfile && !(config->conf & CONF_GETTEXT)) {
+#if defined(WIN32) && !defined(__CYGWIN32__)
+      if(!outfile && !(config->conf & CONF_GETTEXT)) {
         /* We get the output to stdout and we have not got the ASCII/text flag,
            then set stdout to be binary */
         setmode( 1, O_BINARY );
@@ -1605,7 +1724,6 @@ operate(struct Configurable *config, int argc, char *argv[])
 
       main_init();
 
-    /* The new, v7-style easy-interface! */
       curl = curl_easy_init();
       if(curl) {
         curl_easy_setopt(curl, CURLOPT_FILE, (FILE *)&outs); /* where to store */
@@ -1676,7 +1794,6 @@ operate(struct Configurable *config, int argc, char *argv[])
         else 
           curl_easy_setopt(curl, CURLOPT_MAXREDIRS, DEFAULT_MAXREDIRS); 
  
-
         curl_easy_setopt(curl, CURLOPT_CRLF, config->crlf);
         curl_easy_setopt(curl, CURLOPT_QUOTE, config->quote);
         curl_easy_setopt(curl, CURLOPT_POSTQUOTE, config->postquote);
@@ -1730,7 +1847,7 @@ operate(struct Configurable *config, int argc, char *argv[])
 
       if(urlbuffer)
         free(urlbuffer);
-    if (config->outfile && outs.stream)
+      if (outfile && !strequal(outfile, "-") && outs.stream)
         fclose(outs.stream);
       if (config->infile)
         fclose(infd);
@@ -1740,21 +1857,32 @@ operate(struct Configurable *config, int argc, char *argv[])
       if(url)
         free(url);
 
+      if(outfile)
+        free(outfile);
     }
     if(outfiles)
       free(outfiles);
 
-#ifdef MIME_SEPARATORS
-  if (separator)
-    printf("--%s--\n", MIMEseparator);
-#endif
+    if(urls)
+      /* cleanup memory used for URL globbing patterns */
+      glob_cleanup(urls);
+
+    /* empty this urlnode struct */
+    if(urlnode->url)
+      free(urlnode->url);
+    if(urlnode->outfile)
+      free(urlnode->outfile);
+    
+    /* move on to the next URL */
+    nextnode=urlnode->next;
+    free(urlnode); /* free the node */
+    urlnode = nextnode;
+
+  } /* while-loop through all URLs */
 
   if(allocuseragent)
     free(config->useragent);
 
-  /* cleanup memory used for URL globbing patterns */
-  glob_cleanup(urls);
-
   return res;
 }
 

src/urlglob.c

@@ -32,9 +32,23 @@
 #include "../lib/memdebug.h"
 #endif
 
-int glob_word(URLGlob *, char*, int);
+typedef enum {
+  GLOB_OK,
+  GLOB_ERROR
+} GlobCode;
 
-int glob_set(URLGlob *glob, char *pattern, int pos)
+/*
+ * glob_word()
+ *
+ * Input a full globbed string, set the forth argument to the amount of
+ * strings we get out of this. Return GlobCode.
+ */
+GlobCode glob_word(URLGlob *, /* object anchor */
+                   char *,    /* globbed string */
+                   int,       /* position */
+                   int *);    /* returned number of strings */
+
+GlobCode glob_set(URLGlob *glob, char *pattern, int pos, int *amount)
 {
   /* processes a set expression with the point behind the opening '{'
      ','-separated elements are collected until the next closing '}'
@@ -53,12 +67,14 @@ int glob_set(URLGlob *glob, char *pattern, int pos)
   while (1) {
     switch (*pattern) {
     case '\0':			/* URL ended while set was still open */
-      printf("error: unmatched brace at pos %d\n", pos);
-      exit (CURLE_URL_MALFORMAT);
+      /*printf("error: unmatched brace at pos %d\n", pos);*/
+      return GLOB_ERROR;
+
     case '{':
     case '[':			/* no nested expressions at this time */
-      printf("error: nested braces not supported %d\n", pos);
-      exit (CURLE_URL_MALFORMAT);
+      /*printf("error: nested braces not supported %d\n", pos);*/
+      return GLOB_ERROR;
+
     case ',':
     case '}':				/* set element completed */
       *buf = '\0';
@@ -66,40 +82,51 @@ int glob_set(URLGlob *glob, char *pattern, int pos)
         realloc(pat->content.Set.elements,
                 (pat->content.Set.size + 1) * sizeof(char*));
       if (!pat->content.Set.elements) {
-	printf("out of memory in set pattern\n");
-	exit(CURLE_OUT_OF_MEMORY);
+	/*printf("out of memory in set pattern\n");*/
+        return GLOB_ERROR;
       }
       pat->content.Set.elements[pat->content.Set.size] =
         strdup(glob->glob_buffer);
       ++pat->content.Set.size;
 
-      if (*pattern == '}')		/* entire set pattern completed */
+      if (*pattern == '}') {
+        /* entire set pattern completed */
+        int wordamount;
+
 	/* always check for a literal (may be "") between patterns */
-	return pat->content.Set.size * glob_word(glob, ++pattern, ++pos);
+        if(GLOB_ERROR == glob_word(glob, ++pattern, ++pos, &wordamount))
+          wordamount=1;
+	*amount = pat->content.Set.size * wordamount;
+
+        return GLOB_OK;
+      }
 
       buf = glob->glob_buffer;
       ++pattern;
       ++pos;
       break;
+
     case ']':				/* illegal closing bracket */
-      printf("error: illegal pattern at pos %d\n", pos);
-      exit (CURLE_URL_MALFORMAT);
+      /*printf("error: illegal pattern at pos %d\n", pos);*/
+      return GLOB_ERROR;
+
     case '\\':				/* escaped character, skip '\' */
       if (*(buf+1) == '\0') {		/* but no escaping of '\0'! */
-	printf("error: illegal pattern at pos %d\n", pos);
-	exit (CURLE_URL_MALFORMAT);
+	/*printf("error: illegal pattern at pos %d\n", pos); */
+	return GLOB_ERROR;
       }
       ++pattern;
       ++pos;				/* intentional fallthrough */
+
     default:
       *buf++ = *pattern++;		/* copy character to set element */
       ++pos;
     }
   }
-  exit (CURLE_FAILED_INIT);
+  return GLOB_ERROR;
 }
 
-int glob_range(URLGlob *glob, char *pattern, int pos)
+GlobCode glob_range(URLGlob *glob, char *pattern, int pos, int *amount)
 {
   /* processes a range expression with the point behind the opening '['
      - char range: e.g. "a-z]", "B-Q]"
@@ -109,6 +136,7 @@ int glob_range(URLGlob *glob, char *pattern, int pos)
   */
   URLPattern *pat;
   char *c;
+  int wordamount=1;
   
   pat = (URLPattern*)&glob->pattern[glob->size / 2];
   /* patterns 0,1,2,... correspond to size=1,3,5,... */
@@ -116,44 +144,71 @@ int glob_range(URLGlob *glob, char *pattern, int pos)
 
   if (isalpha((int)*pattern)) {		/* character range detected */
     pat->type = UPTCharRange;
-    if (sscanf(pattern, "%c-%c]", &pat->content.CharRange.min_c, &pat->content.CharRange.max_c) != 2 ||
+    if (sscanf(pattern, "%c-%c]", &pat->content.CharRange.min_c,
+               &pat->content.CharRange.max_c) != 2 ||
 	pat->content.CharRange.min_c >= pat->content.CharRange.max_c ||
 	pat->content.CharRange.max_c - pat->content.CharRange.min_c > 'z' - 'a') {
       /* the pattern is not well-formed */ 
-      printf("error: illegal pattern or range specification after pos %d\n", pos);
-      exit (CURLE_URL_MALFORMAT);
+#if 0
+      printf("error: illegal pattern or range specification after pos %d\n",
+             pos);
+#endif
+      return GLOB_ERROR;
     }
     pat->content.CharRange.ptr_c = pat->content.CharRange.min_c;
     /* always check for a literal (may be "") between patterns */
-    return (pat->content.CharRange.max_c - pat->content.CharRange.min_c + 1) *
-      glob_word(glob, pattern + 4, pos + 4);
+
+    if(GLOB_ERROR == glob_word(glob, pattern + 4, pos + 4, &wordamount))
+      wordamount=1;
+
+    *amount = (pat->content.CharRange.max_c -
+               pat->content.CharRange.min_c + 1) *
+      wordamount;
+
+    return GLOB_OK;
   }
+
   if (isdigit((int)*pattern)) { /* numeric range detected */
+
     pat->type = UPTNumRange;
     pat->content.NumRange.padlength = 0;
-    if (sscanf(pattern, "%d-%d]", &pat->content.NumRange.min_n, &pat->content.NumRange.max_n) != 2 ||
+    if (sscanf(pattern, "%d-%d]",
+               &pat->content.NumRange.min_n,
+               &pat->content.NumRange.max_n) != 2 ||
 	pat->content.NumRange.min_n >= pat->content.NumRange.max_n) {
       /* the pattern is not well-formed */ 
-      printf("error: illegal pattern or range specification after pos %d\n", pos);
-      exit (CURLE_URL_MALFORMAT);
+#if 0
+      printf("error: illegal pattern or range specification after pos %d\n",
+             pos);
+#endif
+      return GLOB_ERROR;
     }
     if (*pattern == '0') {		/* leading zero specified */
       c = pattern;  
       while (isdigit((int)*c++))
-	++pat->content.NumRange.padlength;	/* padding length is set for all instances
-						   of this pattern */
+	++pat->content.NumRange.padlength; /* padding length is set for all
+                                              instances of this pattern */
     }
     pat->content.NumRange.ptr_n = pat->content.NumRange.min_n;
     c = (char*)(strchr(pattern, ']') + 1);	/* continue after next ']' */
+
     /* always check for a literal (may be "") between patterns */
-    return (pat->content.NumRange.max_n - pat->content.NumRange.min_n + 1) *
-      glob_word(glob, c, pos + (c - pattern));
+
+    if(GLOB_ERROR == glob_word(glob, c, pos + (c - pattern), &wordamount))
+      wordamount = 1;
+    
+    *amount = (pat->content.NumRange.max_n - 
+               pat->content.NumRange.min_n + 1) *
+      wordamount;
+
+    return GLOB_OK;
   }
-  printf("error: illegal character in range specification at pos %d\n", pos);
-  exit (CURLE_URL_MALFORMAT);
+  /*printf("error: illegal character in range specification at pos %d\n",
+    pos);*/
+  return GLOB_ERROR;
 }
 
-int glob_word(URLGlob *glob, char *pattern, int pos)
+GlobCode glob_word(URLGlob *glob, char *pattern, int pos, int *amount)
 {
   /* processes a literal string component of a URL
      special characters '{' and '[' branch to set/range processing functions
@@ -161,17 +216,17 @@ int glob_word(URLGlob *glob, char *pattern, int pos)
   char* buf = glob->glob_buffer;
   int litindex;
 
+  *amount = 1; /* default is one single string */
+
   while (*pattern != '\0' && *pattern != '{' && *pattern != '[') {
     if (*pattern == '}' || *pattern == ']') {
-      printf("illegal character at position %d\n", pos);
-      exit (CURLE_URL_MALFORMAT);
+      return GLOB_ERROR;
     }
     if (*pattern == '\\') {		/* escape character, skip '\' */
       ++pattern;
       ++pos;
       if (*pattern == '\0') {		/* but no escaping of '\0'! */
-	printf("illegal character at position %d\n", pos);
-	exit (CURLE_URL_MALFORMAT);
+	return GLOB_ERROR;
       }
     }
     *buf++ = *pattern++;		/* copy character to literal */
@@ -182,16 +237,21 @@ int glob_word(URLGlob *glob, char *pattern, int pos)
   /* literals 0,1,2,... correspond to size=0,2,4,... */
   glob->literal[litindex] = strdup(glob->glob_buffer);
   ++glob->size;
-  if (*pattern == '\0')
-    return 1;				/* singular URL processed  */
-  if (*pattern == '{') {
-    return glob_set(glob, ++pattern, ++pos);	/* process set pattern */
+
+  switch (*pattern) {
+  case '\0':
+    return GLOB_OK;			/* singular URL processed  */
+
+  case '{':
+    /* process set pattern */
+    return glob_set(glob, ++pattern, ++pos, amount);
+
+  case '[':
+    /* process range pattern */
+    return glob_range(glob, ++pattern, ++pos, amount);
   }
-  if (*pattern == '[') {
-    return glob_range(glob, ++pattern, ++pos);/* process range pattern */
-  }
-  printf("internal error\n");
-  exit (CURLE_FAILED_INIT);
+
+  return GLOB_ERROR; /* something got wrong */
 }
 
 int glob_url(URLGlob** glob, char* url, int *urlnum)
@@ -201,7 +261,9 @@ int glob_url(URLGlob** glob, char* url, int *urlnum)
    * as the specified URL!
    */
   URLGlob *glob_expand;
+  int amount;
   char *glob_buffer=(char *)malloc(strlen(url)+1);
+
   if(NULL == glob_buffer)
     return CURLE_OUT_OF_MEMORY;
 
@@ -213,7 +275,17 @@ int glob_url(URLGlob** glob, char* url, int *urlnum)
   glob_expand->size = 0;
   glob_expand->urllen = strlen(url);
   glob_expand->glob_buffer = glob_buffer;
-  *urlnum = glob_word(glob_expand, url, 1);
+  glob_expand->beenhere=0;
+  if(GLOB_OK == glob_word(glob_expand, url, 1, &amount))
+    *urlnum = amount;
+  else {
+    /* it failed, we cleanup */
+    free(glob_buffer);
+    free(glob_expand);
+    glob_expand = NULL;
+    *urlnum = 1;
+  }
+
   *glob = glob_expand;
   return CURLE_OK;
 }
@@ -240,15 +312,14 @@ void glob_cleanup(URLGlob* glob)
 
 char *next_url(URLGlob *glob)
 {
-  static int beenhere = 0;
   char *buf = glob->glob_buffer;
   URLPattern *pat;
   char *lit;
   signed int i;
   int carry;
 
-  if (!beenhere)
-    beenhere = 1;
+  if (!glob->beenhere)
+    glob->beenhere = 1;
   else {
     carry = 1;
 

src/urlglob.h

@@ -50,6 +50,7 @@ typedef struct {
   int size;
   int urllen;
   char *glob_buffer;
+  char beenhere;
 } URLGlob;
 
 int glob_url(URLGlob**, char*, int *);

src/version.h

@@ -1,3 +1,3 @@
 #define CURL_NAME "curl"
-#define CURL_VERSION "7.5.2"
+#define CURL_VERSION "7.6-pre4"
 #define CURL_ID CURL_NAME " " CURL_VERSION " (" OS ") "

tests/Makefile.am

@@ -1,3 +1,6 @@
+EXTRA_DIST = ftpserver.pl httpserver.pl runtests.pl
+
+SUBDIRS = data
 
 all:
 install:
@@ -6,10 +9,12 @@ curl:
 	@(cd ..; make)
 
 test:
-	$(PERL) runtests.pl
+	$(MAKE) -C data test
+	srcdir=$(srcdir) $(PERL) $(srcdir)/runtests.pl
 
 quiet-test:
-	$(PERL) runtests.pl -s -a
+	$(MAKE) -C data test
+	srcdir=$(srcdir) $(PERL) $(srcdir)/runtests.pl -s -a
 
 clean:
 	rm -rf log

tests/data/Makefile.am

@@ -0,0 +1,59 @@
+all:
+install:
+
+test:
+	[ -f command1.txt ] || ln -s $(srcdir)/*.txt .
+
+EXTRA_DIST = command1.txt      error113.txt      name17.txt        prot8.txt \
+command10.txt     error114.txt      name18.txt        prot9.txt \
+command100.txt    error115.txt      name19.txt        reply1.txt \
+command101.txt    error116.txt      name2.txt         reply10.txt \
+command102.txt    error117.txt      name20.txt        reply100.txt \
+command103.txt    error118.txt      name200.txt       reply101.txt \
+command104.txt    error119.txt      name201.txt       reply102.txt \
+command105.txt    error19.txt       name21.txt        reply103.txt \
+command106.txt    error20.txt       name22.txt        reply104.txt \
+command107.txt    error201.txt      name23.txt        reply105.txt \
+command108.txt    error21.txt       name24.txt        reply106.txt \
+command109.txt    error23.txt       name25.txt        reply11.txt \
+command11.txt     error24.txt       name3.txt         reply110.txt \
+command110.txt    error25.txt       name4.txt         reply110001.txt \
+command111.txt    ftpd113.txt       name5.txt         reply110002.txt \
+command112.txt    ftpd114.txt       name6.txt         reply12.txt \
+command113.txt    ftpd115.txt       name7.txt         reply13.txt \
+command114.txt    ftpd116.txt       name8.txt         reply14.txt \
+command115.txt    ftpd117.txt       name9.txt         reply15.txt \
+command116.txt    ftpd118.txt       prot1.txt         reply16.txt \
+command117.txt    name1.txt         prot10.txt        reply17.txt \
+command118.txt    name10.txt        prot100.txt       reply2.txt \
+command119.txt    name100.txt       prot101.txt       reply200.txt \
+command12.txt     name101.txt       prot102.txt       reply22.txt \
+command13.txt     name102.txt       prot103.txt       reply24.txt \
+command14.txt     name103.txt       prot104.txt       reply25.txt \
+command15.txt     name104.txt       prot105.txt       reply3.txt \
+command16.txt     name105.txt       prot106.txt       reply4.txt \
+command17.txt     name106.txt       prot107.txt       reply5.txt \
+command18.txt     name107.txt       prot108.txt       reply6.txt \
+command19.txt     name108.txt       prot109.txt       reply7.txt \
+command2.txt      name109.txt       prot11.txt        reply8.txt \
+command20.txt     name11.txt        prot110.txt       reply9.txt \
+command200.txt    name110.txt       prot112.txt       stdin17.txt \
+command201.txt    name111.txt       prot12.txt        stdout107.txt \
+command21.txt     name112.txt       prot13.txt        stdout108.txt \
+command22.txt     name113.txt       prot14.txt        stdout109.txt \
+command23.txt     name114.txt       prot15.txt        stdout110.txt \
+command24.txt     name115.txt       prot16.txt        stdout112.txt \
+command25.txt     name116.txt       prot17.txt        stdout15.txt \
+command3.txt      name117.txt       prot18.txt        stdout18.txt \
+command4.txt      name118.txt       prot2.txt         upload107.txt \
+command5.txt      name119.txt       prot22.txt        upload108.txt \
+command6.txt      name12.txt        prot3.txt         upload109.txt \
+command7.txt      name13.txt        prot4.txt         upload112.txt \
+command8.txt      name14.txt        prot5.txt \
+command9.txt      name15.txt        prot6.txt \
+error111.txt      name16.txt        prot7.txt \
+command26.txt  prot26.txt     command27.txt  prot27.txt \
+name26.txt     reply26.txt    name27.txt     stdout27.txt \
+command28.txt  name28.txt     prot28.txt     reply28.txt \
+command120.txt  name120.txt     prot120.txt     reply120.txt \
+command121.txt  name121.txt     prot121.txt     reply121.txt

tests/data/command120.txt

@@ -0,0 +1,3 @@
+ftp://%HOSTIP:%FTPPORT/106 -Q "-DELE file"
+
+

tests/data/command121.txt

@@ -0,0 +1 @@
+ftp://%HOSTIP:%FTPPORT/106 -Q "-DELE after_transfer" -Q "DELE before_transfer"

tests/data/command26.txt

@@ -0,0 +1,4 @@
+http://%HOSTIP:%HOSTPORT/want/25 -o - -o -
+
+
+