7.12.1 notes

some general cleanups

CVS-INFO

@@ -15,12 +15,6 @@ Compile and build instructions follow below.
   CHANGES.0     contains ancient changes.
   CHANGES.$year contains changes for the particular year.
 
-  tests/memanalyze.pl
-                is for analyzing the output generated by curl if -DCURLDEBUG
-                is used when compiling (run configure with --enable-debug)
-
-  buildconf     builds the makefiles and configure stuff
-
   Makefile.dist is included as the root Makefile in distribution archives
 
   perl/         is a subdirectory with various perl scripts

Makefile.am

@@ -23,8 +23,8 @@
 
 AUTOMAKE_OPTIONS = foreign
 
-EXTRA_DIST = CHANGES COPYING maketgz reconf Makefile.dist	\
-  curl-config.in curl-style.el sample.emacs testcurl.sh RELEASE-NOTES
+EXTRA_DIST = CHANGES COPYING maketgz reconf Makefile.dist curl-config.in \
+ curl-style.el sample.emacs RELEASE-NOTES buildconf buildconf.bat
 
 bin_SCRIPTS = curl-config
 
@@ -54,6 +54,9 @@ test:
 test-full:
 	@(cd tests; $(MAKE) all full-test)
 
+test-torture:
+	@(cd tests; $(MAKE) all torture-test)
+
 #
 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
 # must contain the following line:

Makefile.dist

@@ -30,8 +30,28 @@ ssl:
 	make
 
 borland:
-	cd lib & make -f Makefile.b32
-	cd src & make -f Makefile.b32
+	cd lib
+	make -f Makefile.b32
+	cd ..\src
+	make -f Makefile.b32
+
+borland-ssl:
+	cd lib
+	make -f Makefile.b32 WITH_SSL=1
+	cd ..\src
+	make -f Makefile.b32 WITH_SSL=1
+
+borland-ssl-zlib:
+	cd lib
+	make -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
+	cd ..\src
+	make -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
+
+borland-clean:
+	cd lib
+	make -f Makefile.b32 clean
+	cd ..\src
+	make -f Makefile.b32 clean
 
 mingw32:
 	cd lib & make -f Makefile.m32 ZLIB=1
@@ -41,18 +61,34 @@ mingw32-ssl:
 	cd lib & make -f Makefile.m32 SSL=1 ZLIB=1
 	cd src & make -f Makefile.m32 SSL=1 ZLIB=1
 
+mingw32-clean:
+	cd lib & make -f Makefile.m32 clean
+	cd src & make -f Makefile.m32 clean
+
 vc:
 	cd lib
 	nmake /f Makefile.vc6 cfg=release
 	cd ..\src
 	nmake /f Makefile.vc6
 
+vc-zlib:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-zlib
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-zlib
+
 vc-ssl:
 	cd lib
 	nmake /f Makefile.vc6 cfg=release-ssl
 	cd ..\src
 	nmake /f Makefile.vc6 cfg=release-ssl
 
+vc-ssl-zlib:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-ssl-zlib
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-ssl-zlib
+
 vc-ssl-dll:
 	cd lib
 	nmake /f Makefile.vc6 cfg=release-ssl-dll
@@ -82,8 +118,16 @@ amiga:
 	cd ./src && make -f makefile.amiga
 
 netware:
-        cd lib && make -f Makefile.netware
-        cd src && make -f Makefile.netware
+	$(MAKE) -C lib -f Makefile.netware
+	$(MAKE) -C src -f Makefile.netware
+
+netware-ssl:
+	$(MAKE) -C lib -f Makefile.netware SSL=1
+	$(MAKE) -C src -f Makefile.netware SSL=1
+
+netware-clean:
+	$(MAKE) -C lib -f Makefile.netware clean
+	$(MAKE) -C src -f Makefile.netware clean
 
 unix: all
 

README

@@ -17,7 +17,9 @@ README
 
   You find answers to the most frequent questions we get in the FAQ document.
 
-  Study the COPYING file for distribution terms and similar.
+  Study the COPYING file for distribution terms and similar. If you distribute
+  curl binaries or other binaries that involve libcurl, you might enjoy the
+  LICENSE-MIXING document.
 
 CONTACT
 
@@ -32,42 +34,44 @@ WEB SITE
 
         Sweden    -- http://curl.haxx.se/
         Australia -- http://curl.planetmirror.com/
-        Estonia   -- http://curl.dope-brothers.com/
+        Denmark   -- http://curl.cofman.dk/
+        Estonia   -- http://curl.wildyou.net/
         Germany   -- http://curl.mirror.at.stealer.net/
+        Germany   -- http://curl.netmirror.org/
         Russia    -- http://curl.tsuren.net/
         Thailand  -- http://curl.siamu.ac.th/
         US (CA)   -- http://curl.mirror.redwire.net/
+        US        -- http://curl.signal42.com/
 
 DOWNLOAD
 
   The official download mirror sites are:
 
-        Australia -- http://curl.planetmirror.com/download/
-        Estonia   -- http://curl.dope-brothers.com/download/
+        Australia -- http://curl.planetmirror.com/download.html
+        Estonia   -- http://curl.wildyou.net/download.html
         Germany   -- ftp://ftp.fu-berlin.de/pub/unix/network/curl/
+        Germany   -- http://curl.mirror.at.stealer.net/download.html
+        Germany   -- http://curl.netmirror.org/download.html
+        Germany   -- http://www.mirrorspace.org/curl/
         Hongkong  -- http://www.execve.net/curl/
-        Russia    -- http://curl.tsuren.net/download/
+        Russia    -- http://curl.tsuren.net/download.html
         Sweden    -- ftp://ftp.sunet.se/pub/www/utilities/curl/
         Sweden    -- http://cool.haxx.se/curl/
-        Thailand  -- http://curl.siamu.ac.th/download/
-        US (CA)   -- http://curl.mirror.redwire.net/download/
+        Thailand  -- http://curl.siamu.ac.th/download.html
+        US (CA)   -- http://curl.mirror.redwire.net/download.html
 
 CVS
 
   To download the very latest source off the CVS server do this:
 
-    cvs -d :pserver:cvsread@cvs.php.net:/repository login
+   cvs -d :pserver:anonymous@cool.haxx.se:/cvsroot/curl login
 
-  (enter "phpfi" when asked for password)
+  (just press enter when asked for password)
 
-    cvs -d :pserver:cvsread@cvs.php.net:/repository co curl 
+   cvs -d :pserver:anonymous@cool.haxx.se:/cvsroot/curl co curl
 
   (you'll get a directory named curl created, filled with the source code)
 
-    cvs -d :pserver:cvsread@cvs.php.net:/repository logout
-        
-  (you're off the hook!)
-
 NOTICE
 
   Curl contains pieces of source code that is Copyright (c) 1998, 1999

RELEASE-NOTES

@@ -1,89 +1,83 @@
-Curl and libcurl 7.11.1. A bugfix release.
+Curl and libcurl 7.12.1
 
- Public curl release number:               79
- Releases counted from the very beginning: 106
- Available command line options:           94
- Available curl_easy_setopt() options:     112
+ Public curl release number:               82
+ Releases counted from the very beginning: 109
+ Available command line options:           96
+ Available curl_easy_setopt() options:     120
+ Number of public functions in libcurl:    36
+ Amount of public web site mirrors:        12
+ Number of known libcurl bindings:         26
 
 This release includes the following changes:
 
- o CURLOPT_POSTFIELDSIZE_LARGE added to offer POSTs larger than 2GB
- o CURL_VERSION_LARGEFILE is a feature bit returned by libcurls that feature
-   large file support
- o libcurl only requires winsock 1.1 on windows now
- o when doing FTP, curl now sends QUIT before disconnecting
- o name resolves can now timeout on windows too
- o $HOME is now recognized better when looking for .netrc files
- o now re-uses the ares handle when re-using curl handles
- o SO_BINDTODEVICE is used for network interface binding
- o configure --disable-manual disables the built-in huge manual from the
-   command line tool
- o the default Accept: header used in HTTP requests changed
- o asynch dns lookups now require the c-ares library
- o curl --socks can be used to set a SOCKS5 proxy to use
- o response-headers received after a (proxy) CONNECT request are now passed
-   to the header callback just like other headers
+ o the version string now only contains info about (sub) package versions,
+   while for example krb4 and ipv6 now only are available as 'features'
+ o added curl_easy_reset()
+ o socks proxy support even when libcurl is built ipv6-enabled
+ o read callbacks can stop the transfer by returning CURL_READFUNC_ABORT
+ o libcurl-tutorial.3 is the new man page formerly known as libcurl-the-guide
+ o additional SSL trace data might be sent to the debug callback using two new
+   types: CURLINFO_SSL_DATA_IN and CURLINFO_SSL_DATA_OUT
+ o multipart formposts can upload files larger than system memory
+ o the curl tool continues with the next URL even if one transfer fails
+ o FTP 3rd party transfer support - seven new setopt() options
 
 This release includes the following bugfixes:
 
- o builds and runs on Novell NetWare
- o Windows builds now report OS as "i386-pc-win32"
- o received signals during SSL connect is handled better
- o improved PUT/POST with NTLM/Digest authentication
- o following redirects and doing NTLM/Digest (where the first connection gets
-   closed) with the multi interface work better now
- o file: progress meter and getinfo variables work now
- o CURLOPT_FRESH_CONNECT and CURLAUTH_NTLM now work when set together
- o share interface usage without (un)lock functions segfaulted
- o --limit-rate no longer cripples the --speed-limit feature
- o fixed verbose output problem with ipv6-enabled re-used connections
- o fixed the socks5 code to check version in the socks response properly
- o dns cache bug - fixed the 'inuse' counter
- o large file fix for Content-Length
- o better docs for the share interface
- o several configure fixes for mingw/msys
- o setting a Host: header is no longer affecting the Host: header used when
-   libcurl follows a Location:
- o fixed numerous compiler warnings on several operating systems and compilers
- o PUTing from stdin couldn't disable chunked transfer-encoding
- o corrected the mingw makefiles
- o improved the configure libz detection
- o fixed EPRT/PORT use when doing FTP on ipv6-enabled AIX hosts
- o *nroff commands that only support -mandoc and not -man are now supported
-   (for the built-in manual text in the command line tool)
- o fixed the unconditional #include of config.h in hugehelp.c
- o builds fine on MPE/iX
- o upload using chunked transfer-encoding now sends the last chunk properly
-   teriminated with an extra CRLF
- o Fixed the progress meter display for files >2GB
- o persistant connections over a proxy messed up the proxy name/password
- o the socks5 code segfaulted if no username/password was set
- o the *_LARGE options now take curl_off_t types as parameters and this will
-   make it possible to handle large files on windows too
- o builds with large file support even on systems without strtoll()
+ o UTF-8 encoded certificate names can now be verified properly
+ o krb4 link problem
+ o HTTP Negotiate service name now provided in uppercase
+ o no longer accepts any cookies with domain set to just a TLD
+ o HTTP Digest properties without quotes in the header
+ o bad Host: header case on re-used connections over proxy
+ o duplicate Host: header case on re-used connections
+ o curl -o name#[num] now works when no globbing for [num] exists
+ o test suite runs fine with valgrind 2.1.x
+ o negative Content-Length is ignored
+ o test 505 runs fine on windows
+ o curl_share_cleanup() crash
+ o --trace files now get the final info lines too
+ o multi interface connects fine to multi-IP resolving hosts
+ o --limit-rate works on Mac OS X (and other systems with bad poll()s)
+ o cookies can now hold 4999 bytes of content
+ o HTTP POST/PUT with NTLM/Digest/Negotiate to a URL returning 3XX
+ o HTTPS POST/PUT over a proxy requiring NTLM/Digest/Negotiate
+ o less restrictive libidn requirements, 0.4.1 or later is fine
+ o HTTP POST or PUT with Digest/Negotiate/NTLM selected but the server
+   didn't require any authentication
+ o win32 file:// transfer free memory bug
+ o configure --disable-http builds a libcurl without HTTP support
+ o CURLOPT_FILETIME had wrong type in curl.h, it expects a long argument
+ o builds fine with Borland on Windows
+ o the msvc curllib.dsp now builds the libcurl.lib file
+ o builds fine on VMS
+ o builds fine on NetWare
+ o HTTP Digest authentication with proxies uses correct user name + password
+ o builds fine with lcc-win32
 
 Other curl-related news since the previous public release:
 
- o Many platforms are being used to autobuild and autotest curl on a daily
-   basis. Please join in and test curl on your systems:
-   http://curl.haxx.se/auto/
- o the curl mailing lists moved, (re-)subscribe to the new ones from here:
-   http://curl.haxx.se/mail/
- o c-ares 1.1.0 was relased: http://daniel.haxx.se/projects/c-ares/
- o TclCurl 0.11.0 was released:
+ o James Hu took over after Kevin Roth as maintainer of the curl package on
+   cygwin. Many saludos to Kevin for a work well done during many years.
+ o Gambas binding: http://gambas.sf.net
+ o pycurl 7.12.0 was released http://pycurl.sf.net
+ o wxWidgets binding: http://homepage.mac.com/codonnell/wxcurldav/
+ o New Austrian curl web mirror: http://curl.gds.tuwien.ac.at
+ o TclCurl 0.12.0 was released:
    http://personal1.iddeo.es/andresgarci/tclcurl/english/
- o PycURL 7.11.0 was released: http://pycurl.sourceforge.net/
- o the libcurl D binding was released:
-   http://www.atari-soldiers.com/libcurl.html
- o new Estonian web site mirror: http://curl.dope-brothers.com/
+ o Ch binding: http://chcurl.sourceforge.net
+ o New US curl web mirror: http://curl.109k.com
+ o glib/GTK+ binding: http://atterer.net/glibcurl/
+ o New French curl web mirror: http://curl.mirror.internet.tp
 
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Gisle Vanem, Vincent Bronner, Richard Bramante, Dirk Manske, Dan Fandrich,
- Ken Hirsch, Stadler Stephan, Domenico Andreoli, Patrick Smith, Tor Arntsen,
- Andr<EFBFBD>s Garc<72>a, Tim Baker, Len Krause, Gilad, Ken Rastatter, P R Schaffner,
- Greg Hewgill, Ben Greear, Jeff Lawson, Grigory Entin, Doug Porter, David
- Byron, Andy Serpa, Joe Halpin, Christopher R. Palmer, G<>nter Knauf
+ Gisle Vanem, Vincent Bronner, Alexander Krasnostavsky, Chris Gaukroger,
+ G<EFBFBD>nter Knauf, Marty Kuhrt, Kjetil Jacobsen, Steven Bazyl, Seshubabu Pasam,
+ Luca Alteas, Jean-Louis Lemaire, David Byron, David Cohen, Rob Stanzel,
+ Niels van Tongeren, Andr<64>s Garc<72>a, Toby Peterson, Casey O'Donnell, Brian
+ Akins, Bertrand Demiddelaer, Joel Chen, Dylan Salisbury, Enrico Scholz,
+ Alexis Carvalho
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,53 +1,9 @@
 Issues not sorted in any particular order.
-  #[num] refers to bug report numbers.
-  UNASSIGNED means that no person has publicly stated to work on the issue.
-  DELETE means the issue is subject for dismissal
 
-To get fixed in 7.11.1 (planned release in March 2004)
+To get fixed in 7.12.2 (planned release: December 2004)
 ======================
 
-To get fixed in 7.11.2 (planned release May/June 2004)
-======================
+36. Fix HTTP Negotiate authentication so that no bogus user name needs to be
+    provided to activate it.
 
-6. REST fix for servers not behaving well on >2GB requests. This should fail
-   if the server doesn't set the pointer to the requested index. The tricky
-   part is to figure out if the server did the right thing or not.
-   UNASSIGNED
-
-10. Anton Fedorov's "dumpcert" patch UNASSIGNED
-    http://curl.haxx.se/mail/lib-2004-03/0088.html
-
-14. Evaluate/apply Gertjan van Wingerde's SSL patches, UNASSIGNED
-    http://curl.haxx.se/mail/lib-2004-03/0087.html
-
-23. Peter Sylvester's "Most Significant Common Name" change. Feedback welcome.
-    At least the UTF8 conversion and comparison should be done. Patch?
-    UNASSIGNED
-
-24. Make the progress meter use one digit more for the hour time fields.
-    Accomplish this by removing one of the times displayed.
-
-27. Put the version defines in their own header file, so that lib/libcurl.rc
-    can include only that to reduce problems with MSVC.
-
-28. Optimize the way libcurl uses CWD on each new request over a persistent
-    connection (on FTP) even if it doesn't have to.
-
-29. Define USE_NTRESPONSES in the NTLM code to work properly with >14 letter
-    passwords against IIS servers. Requires test cases to be updated
-    accordingly. #915609
-
-30. Digest re-negotiation is not supported, we wrongly assume a new 401
-    response to signify an authenticaion error. We need to detect the
-    difference between a 401 due to a bad Digest authorization header and a
-    401 because the server wants to re-negotiate.
-
-    Mitz Wark provided details and traces here:
-    http://curl.haxx.se/mail/lib-2004-03/0299.html
-
-To get fixed in 7.12.0
-======================
-
-25. curl_easy_strerror() curl_multi_strerror() curl_share_strerror()
-
-26. i18n of error messages
+ Bugfixes reported until late November

acinclude.m4

@@ -64,7 +64,7 @@ dnl the code was bad, try a different program now, test 3
 ],[
 /* ioctlsocket source code */
  int socket;
- int flags = ioctlsocket(socket, FIONBIO, &flags);
+ unsigned long flags = ioctlsocket(socket, FIONBIO, &flags);
 ],[
 dnl ioctlsocket test was good
 nonblock="ioctlsocket"
@@ -245,7 +245,8 @@ AC_DEFUN([CURL_CHECK_WORKING_GETADDRINFO],[
 #include <sys/types.h>
 #include <sys/socket.h>
 
-void main(void) {
+int main(void)
+{
     struct addrinfo hints, *ai;
     int error;
 
@@ -254,11 +255,9 @@ void main(void) {
     hints.ai_socktype = SOCK_STREAM;
     error = getaddrinfo("127.0.0.1", "8080", &hints, &ai);
     if (error) {
-        exit(1);
-    }
-    else {
-        exit(0);
+        return 1;
     }
+    return 0;
 }
 ],[
   ac_cv_working_getaddrinfo="yes"
@@ -276,10 +275,72 @@ if test "$ac_cv_working_getaddrinfo" = "yes"; then
 fi
 ])
 
+dnl ************************************************************
+dnl check for working NI_WITHSCOPEID in getnameinfo()
+dnl
+AC_DEFUN([CURL_CHECK_NI_WITHSCOPEID],[
+  AC_CACHE_CHECK(for working NI_WITHSCOPEID, ac_cv_working_ni_withscopeid,[
+
+ AC_RUN_IFELSE([[
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netdb.h>
+int main()
+{
+#ifdef NI_WITHSCOPEID
+   struct sockaddr_storage ss;
+   int sslen = sizeof(ss);
+   int rc;
+   char hbuf[NI_MAXHOST];
+   int fd = socket(AF_INET6, SOCK_STREAM, 0);
+   if(fd < 0) {
+     perror("socket()");
+     return 1; /* couldn't create socket of either kind */
+   }
+
+   rc = getsockname(fd, (struct sockaddr *)&ss, &sslen);
+   if(rc) {
+     perror("getsockname()");
+     return 2;
+   }
+
+   rc = getnameinfo((struct sockaddr *)&ss, sslen, hbuf, sizeof(hbuf),
+                     NULL, 0,
+                     NI_NUMERICHOST | NI_NUMERICSERV | NI_WITHSCOPEID);
+
+   if(rc) {
+     printf("rc = %s\n", gai_strerror(rc));
+     return 3;
+   }
+
+   return 0; /* everything works fine, use NI_WITHSCOPEID! */
+#else
+   return 4; /* we don't seem to have the definition, don't use it */
+#endif
+}
+]],
+dnl program worked:
+[ ac_cv_working_ni_withscopeid="yes" ],
+dnl program failed:
+[ ac_cv_working_ni_withscopeid="no" ],
+dnl we cross-compile:
+[ ac_cv_working_ni_withscopeid="yes" ]
+) dnl end of AC_RUN_IFELSE
+
+]) dnl end of AC_CACHE_CHECK
+
+if test "$ac_cv_working_ni_withscopeid" = "yes"; then
+  AC_DEFINE(HAVE_NI_WITHSCOPEID, 1,
+            [Define if NI_WITHSCOPEID exists and works])
+fi
+
+]) dnl end of AC_DEFUN
+
 
 AC_DEFUN([CURL_CHECK_LOCALTIME_R],
 [
-  dnl check for a few thread-safe functions
+  dnl check for localtime_r
   AC_CHECK_FUNCS(localtime_r,[
     AC_MSG_CHECKING(whether localtime_r is declared)
     AC_EGREP_CPP(localtime_r,[
@@ -295,6 +356,112 @@ AC_DEFUN([CURL_CHECK_LOCALTIME_R],
 	AC_MSG_RESULT(no))])])
 ])
 
+dnl
+dnl This function checks for strerror_r(). If it isn't found at first, it
+dnl retries with _THREAD_SAFE defined, as that is what AIX seems to require
+dnl in order to find this function.
+dnl
+dnl If the function is found, it will then proceed to check how the function
+dnl actually works: glibc-style or POSIX-style.
+dnl
+dnl glibc:
+dnl      char *strerror_r(int errnum, char *buf, size_t n);
+dnl  
+dnl  What this one does is to return the error string (no surprises there),
+dnl  but it doesn't usually copy anything into buf!  The 'buf' and 'n'
+dnl  parameters are only meant as an optional working area, in case strerror_r
+dnl  needs it.  A quick test on a few systems shows that it's generally not
+dnl  touched at all.
+dnl
+dnl POSIX:
+dnl      int strerror_r(int errnum, char *buf, size_t n);
+dnl
+AC_DEFUN([CURL_CHECK_STRERROR_R],
+[
+  dnl determine of strerror_r is present
+  AC_CHECK_FUNCS(strerror_r,[
+    AC_MSG_CHECKING(whether strerror_r is declared)
+    AC_EGREP_CPP(strerror_r,[
+#include <string.h>],[
+      strerror_r="yes"
+      AC_MSG_RESULT(yes)],[
+      AC_MSG_RESULT(no)
+      AC_MSG_CHECKING(whether strerror_r with -D_THREAD_SAFE is declared)
+      AC_EGREP_CPP(strerror_r,[
+#define _THREAD_SAFE
+#include <string.h>],[
+        strerror_r="yes"
+	CPPFLAGS="-D_THREAD_SAFE $CPPFLAGS"
+	AC_MSG_RESULT(yes)],
+	AC_MSG_RESULT(no))])])
+
+  if test "x$strerror_r" = "xyes"; then
+
+    dnl check if strerror_r is properly declared in the headers
+    AC_CHECK_DECL(strerror_r, ,
+     AC_DEFINE(HAVE_NO_STRERROR_R_DECL, 1, [we have no strerror_r() proto])
+,
+[#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+])
+
+    dnl determine if this strerror_r() is glibc or POSIX
+    AC_MSG_CHECKING([for a glibc strerror_r API])
+    AC_TRY_RUN([
+#include <string.h>
+#include <errno.h>
+int
+main () {
+  char buffer[1024]; /* big enough to play with */
+  char *string =
+    strerror_r(EACCES, buffer, sizeof(buffer));
+    /* this should've returned a string */
+    if(!string || !string[0])
+      return 99;
+    return 0;
+}
+],
+    GLIBC_STRERROR_R="1"
+    AC_DEFINE(HAVE_GLIBC_STRERROR_R, 1, [we have a glibc-style strerror_r()])
+    AC_MSG_RESULT([yes]),
+    AC_MSG_RESULT([no]),
+    dnl cross-compiling!
+    AC_MSG_NOTICE([cannot determine strerror_r() style: edit lib/config.h manually!])
+    )
+
+    if test -z "$GLIBC_STRERROR_R"; then
+
+      AC_MSG_CHECKING([for a POSIX strerror_r API])
+      AC_TRY_RUN([
+#include <string.h>
+#include <errno.h>
+int
+main () {
+  char buffer[1024]; /* big enough to play with */
+  int error =
+    strerror_r(EACCES, buffer, sizeof(buffer));
+    /* This should've returned zero, and written an error string in the
+       buffer.*/
+    if(!buffer[0] || error)
+      return 99;
+    return 0;
+}
+],
+      AC_DEFINE(HAVE_POSIX_STRERROR_R, 1, [we have a POSIX-style strerror_r()])
+      AC_MSG_RESULT([yes]),
+      AC_MSG_RESULT([no]) ,
+      dnl cross-compiling!
+      AC_MSG_NOTICE([cannot determine strerror_r() style: edit lib/config.h manually!])
+    )
+
+    fi dnl if not using glibc API
+
+  fi dnl we have a strerror_r
+
+])
+
 AC_DEFUN([CURL_CHECK_INET_NTOA_R],
 [
   dnl determine if function definition for inet_ntoa_r exists.
@@ -511,10 +678,11 @@ AC_DEFUN([CURL_CC_DEBUG_OPTS],
          dnl   "invalid format string conversion"
          dnl * 279 warns on static conditions in while expressions
          dnl * 981 warns on "operands are evaluated in unspecified order"
+         dnl * 1418 "external definition with no prior declaration"
          dnl * 1419 warns on "external declaration in primary source file"
          dnl   which we know and do on purpose.
 
-         WARN="-wd279,269,1419,981"
+         WARN="-wd279,269,981,1418,1419"
 
          if test "$gccnum" -gt "600"; then
             dnl icc 6.0 and older doesn't have the -Wall flag
@@ -550,6 +718,11 @@ AC_DEFUN([CURL_CC_DEBUG_OPTS],
            WARN="$WARN -Wendif-labels -Wstrict-prototypes"
          fi
 
+         if test "$gccnum" -ge "304"; then
+           # try -Wunreachable-code on gcc 3.4
+           WARN="$WARN -Wunreachable-code"
+         fi
+
          for flag in $CPPFLAGS; do
            case "$flag" in
             -I*)

ares/CHANGES

@@ -1,3 +1,108 @@
+  Changelog for the c-ares project
+
+* July 24
+
+- Made the lib get built static only if --enable-debug is used.
+
+- Gisle Vanem fixed:
+
+  Basically in loops like handle_errors(), 'query->next' was assigned a local
+  variable and then query was referenced after the memory was freed by
+  next_server(). I've changed that so next_server() and end_query() returns
+  the next query. So callers should use this ret-value.
+
+  The next problem was that 'server->tcp_buffer_pos' had a random value at
+  entry to 1st recv() (luckily causing Winsock to return ENOBUFS).
+
+  I've also added a ares_writev() for Windows to streamline the code a bit
+  more.
+
+* July 20
+- Fixed a few variable return types for some system calls. Made configure
+  check for ssize_t to make it possible to use that when receiving the send()
+  error code. This is necessary to prevent compiler warnings on some systems.
+
+- Made configure create config.h, and all source files now include setup.h that
+  might include the proper config.h (or a handicrafted alternative).
+
+- Switched to 'ares_socket_t' type for sockets in ares, since Windows don't
+  use 'int' for that.
+
+- automake-ified and libool-ified c-ares. Now it builds libcares as a shared
+  lib on most platforms if wanted. (This bloated the size of the release
+  archive with another 200K!)
+
+- Makefile.am now uses Makefile.inc for the c sources, h headers and man
+  pages, to make it easier for other makefiles to use the exact same set of
+  files.
+
+- Adjusted 'maketgz' to use the new automake magic when building distribution
+  archives.
+
+- Anyone desires HTML and/or PDF versions of the man pages in the release
+  archives?
+
+* July 3
+- G<>nter Knauf made c-ares build and run on Novell Netware.
+
+* July 1
+- Gisle Vanem provided Makefile.dj to build with djgpp, added a few more djgpp
+  fixes and made ares not use 'errno' to provide further info on Windows.
+
+* June 30
+- Gisle Vanem made it build with djgpp and run fine with the Watt-32 stack.
+
+* June 10
+- Gisle Vanem's init patch for Windows:
+
+  The init_by_resolv_conf() function fetches the DNS-server(s)
+  from a series of registry branches.
+
+  This can be wrong in the case where DHCP has assigned nameservers, but the
+  user has overridden these servers with other prefered settings. Then it's
+  wrong to use the DHCPNAMESERVER setting in registry.
+
+  In the case of no global DHCP-assigned or fixed servers, but DNS server(s)
+  per adapter, one has to query the adapter branches.  But how can c-ares know
+  which adapter is valid for use? AFAICS it can't. There could be one adapter
+  that is down (e.g. a VPN adapter).
+
+  So it's better to leave this to the IP Helper API (iphlapi) available in
+  Win-98/2000 and later. My patch falls-back to the old way if not available.
+
+* June 8
+- James Bursa fixed an init issue for RISC OS.
+
+* May 11
+- Nico Stappenbelt reported that when processing domain and search lines in
+  the resolv.conf file, the first entry encountered is processed and used as
+  the search list. According to the manual pages for both Linux, Solaris and
+  Tru64, the last entry of either a domain or a search field is used.
+
+  This is now adjusted in the code
+
+Version 1.2.0 (April 13, 2004)
+
+* April 2, 2004
+- Updated various man pages to look nicer when converted to HTML on the web
+  site.
+
+* April 1, 2004
+- Dirk Manske provided a new function that is now named ares_cancel(). It is
+  used to cancel/cleanup a resolve/request made using ares functions on the
+  given ares channel. It does not destroy/kill the ares channel itself.
+
+- Dominick Meglio cleaned up the formatting in several man pages.
+
+* March 30, 2004
+- Dominick Meglio's new ares_expand_string. A helper function when decoding
+  incoming DNS packages.
+
+- Daniel Stenberg modified the Makefile.in to use a for loop for the man page
+  installation to improve overview and make it easier to add man pages.
+
+Version 1.1.0 (March 11, 2004)
+
 * March 9, 2004
 - Gisle Vanem improved build on Windows.
 
@@ -74,3 +179,5 @@ Version 1.0-pre1 (8 October 2003)
 - Daniel Stenberg adjusted the windows port
 
 - liren at vivisimo.com made the initial windows port
+
+* Imported the sources from ares 1.1.1

ares/FILES

@@ -10,6 +10,9 @@ maketgz
 aclocal.m4
 acinclude.m4
 Makefile.in
+Makefile.dj
+Makefile.m32
+Makefile.netware
 install-sh
 mkinstalldirs
 configure
@@ -21,8 +24,6 @@ vc/adig/adig.dsp
 vc/adig/adig.mak
 vc/adig/adig.plg
 vc/vc.dsw
-vc/vc.ncb
-vc/vc.opt
 vc/ahost/ahost.dep
 vc/ahost/ahost.dsp
 vc/ahost/ahost.mak

ares/Makefile.am

@@ -0,0 +1,57 @@
+AUTOMAKE_OPTIONS = foreign
+
+lib_LTLIBRARIES = libcares.la
+
+man_MANS = $(MANPAGES)
+
+MSVCFILES = vc/adig/adig.dep vc/adig/adig.dsp vc/adig/adig.mak	\
+ vc/adig/adig.plg vc/vc.dsw vc/ahost/ahost.dep vc/ahost/ahost.dsp	\
+ vc/ahost/ahost.mak vc/ahost/ahost.plg vc/areslib/areslib.dep		\
+ vc/areslib/areslib.dsp vc/areslib/areslib.mak vc/areslib/areslib.plg
+
+# adig and ahost are just sample programs and thus not mentioned with the
+# regular sources and headers
+EXTRA_DIST = CHANGES README.cares Makefile.inc adig.c ahost.c $(man_MANS) \
+ $(MSVCFILES)
+
+
+VER=-version-info 0:0:0
+# This flag accepts an argument of the form current[:revision[:age]]. So,
+# passing -version-info 3:12:1 sets current to 3, revision to 12, and age to
+# 1.
+#
+# If either revision or age are omitted, they default to 0. Also note that age
+# must be less than or equal to the current interface number.
+#
+# Here are a set of rules to help you update your library version information: 
+#
+# 1.Start with version information of 0:0:0 for each libtool library.
+#
+# 2.Update the version information only immediately before a public release of
+# your software. More frequent updates are unnecessary, and only guarantee
+# that the current interface number gets larger faster.
+#
+# 3.If the library source code has changed at all since the last update, then
+# increment revision (c:r+1:a)
+#
+# 4.If any interfaces have been added, removed, or changed since the last
+# update, increment current, and set revision to 0. (c+1:r=0:a)
+#
+# 5.If any interfaces have been added since the last public release, then
+# increment age. (c:r:a+1)
+#
+# 6.If any interfaces have been removed since the last public release, then
+# set age to 0. (c:r:a=0)
+#
+
+libcares_la_LDFLAGS = $(VER)
+
+# Makefile.inc provides the CSOURCES and HHEADERS defines
+include Makefile.inc
+
+libcares_la_SOURCES = $(CSOURCES) $(HHEADERS)
+
+# where to install the c-ares headers
+libcares_ladir = $(includedir)
+# what headers to install on 'make install':
+libcares_la_HEADERS = ares.h ares_version.h

ares/Makefile.dj

@@ -0,0 +1,56 @@
+#
+# c-ares Makefile for djgpp/gcc/Watt-32
+#   By Gisle Vanem <giva@bgnett.no> 2004.
+#
+.SUFFIXES: .exe
+
+WATT32_ROOT = $(subst \,/,$(WATT_ROOT))
+
+CC      = gcc
+CFLAGS  = -O2 -Wall -DWATT32 -Dselect=select_s -I$(WATT32_ROOT)/inc
+LDFLAGS = -s
+EX_LIBS = $(WATT32_ROOT)/lib/libwatt.a
+
+SOURCE = ares_cancel.c ares_destroy.c ares_expand_name.c ares_expand_string.c ares_fds.c \
+         ares_free_hostent.c ares_free_string.c ares_gethostbyaddr.c ares_gethostbyname.c \
+         ares_init.c ares_mkquery.c ares_parse_a_reply.c ares_parse_ptr_reply.c \
+         ares_process.c ares_query.c ares_search.c ares_send.c ares_strerror.c \
+         ares_timeout.c ares__close_sockets.c ares__get_hostent.c ares__read_line.c \
+         ares_version.c
+
+OBJ_DIR = djgpp
+
+OBJECTS = $(addprefix $(OBJ_DIR)/, $(SOURCE:.c=.o))
+
+
+all: $(OBJ_DIR) libcares.a ahost.exe adig.exe
+	@echo Welcome to c-ares.
+
+$(OBJ_DIR):
+	- mkdir $(OBJ_DIR)
+
+libcares.a: $(OBJECTS)
+	ar rs $@ $?
+
+ahost.exe: ahost.c libcares.a
+	$(CC) $(LDFLAGS) $(CFLAGS) -o $@ $^ $(EX_LIBS)
+
+adig.exe: adig.c libcares.a
+	$(CC) $(LDFLAGS) $(CFLAGS) -o $@ $^ $(EX_LIBS)
+
+clean:
+	rm -f $(OBJECTS) libcares.a
+
+vclean realclean: clean
+	rm -f ahost.exe adig.exe depend.dj
+	- rmdir $(OBJ_DIR)
+
+$(OBJ_DIR)/%.o: %.c
+	$(CC) $(CFLAGS) -o $@ -c $<
+	@echo
+
+depend:
+	$(CC) -MM $(CFLAGS) $(SOURCE) | \
+	sed -e 's/^\([a-zA-Z0-9_-]*\.o:\)/$$(OBJ_DIR)\/\1/' > depend.dj
+
+-include depend.dj

ares/Makefile.in

@@ -1,93 +0,0 @@
-# $Id$
-
-SHELL=/bin/sh
-INSTALL=@INSTALL@
-RANLIB=@RANLIB@
-VPATH=@srcdir@
-srcdir=@srcdir@
-top_srcdir=@top_srcdir@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-mandir=@mandir@
-
-LIB=libcares.a
-CC=@CC@
-CPPFLAGS=@CPPFLAGS@
-CFLAGS=@CFLAGS@ ${WARN_CFLAGS} ${ERROR_CFLAGS}
-DEFS=@DEFS@
-LDFLAGS=@LDFLAGS@
-LIBS=@LIBS@
-ALL_CFLAGS=${CPPFLAGS} ${CFLAGS} ${DEFS}
-OBJS=	ares__close_sockets.o ares__get_hostent.o ares__read_line.o \
-	ares_destroy.o ares_expand_name.o ares_fds.o \
-	ares_free_hostent.o ares_free_string.o ares_gethostbyaddr.o \
-	ares_gethostbyname.o ares_init.o ares_mkquery.o ares_parse_a_reply.o \
-	ares_parse_ptr_reply.o ares_process.o ares_query.o ares_search.o \
-	ares_send.o ares_strerror.o ares_timeout.o ares_version.o
-
-$(LIB): ${OBJS}
-	ar cru $@ ${OBJS}
-	${RANLIB} $@
-
-all: $(LIB) demos
-
-demos: adig ahost
-
-tags:
-	etags *.[ch]
-
-adig: adig.o $(LIB)
-	${CC} ${LDFLAGS} -o $@ adig.o $(LIB) ${LIBS}
-
-ahost: ahost.o $(LIB)
-	${CC} ${LDFLAGS} -o $@ ahost.o $(LIB) ${LIBS}
-
-${OBJS}: ares.h ares_dns.h ares_private.h
-
-.c.o:
-	${CC} -c ${ALL_CFLAGS} $<
-
-check:
-
-install:
-	${top_srcdir}/mkinstalldirs ${DESTDIR}${libdir}
-	${top_srcdir}/mkinstalldirs ${DESTDIR}${includedir}
-	${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 644 $(LIB) ${DESTDIR}${libdir}
-	${RANLIB} ${DESTDIR}${libdir}/$(LIB)
-	chmod u-w ${DESTDIR}${libdir}/$(LIB)
-	${INSTALL} -m 444 ${srcdir}/ares.h ${DESTDIR}${includedir}
-	${INSTALL} -m 444 ${srcdir}/ares_version.h ${DESTDIR}${includedir}
-	${INSTALL} -m 444 ${srcdir}/ares_destroy.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_expand_name.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_fds.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_free_hostent.3 \
-		${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_free_string.3 \
-		${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_gethostbyaddr.3 \
-		${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_gethostbyname.3 \
-		${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_init.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_init_options.3 \
-		${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_mkquery.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_parse_a_reply.3 \
-		${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_parse_ptr_reply.3 \
-		${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_process.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_query.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_search.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_send.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_strerror.3 ${DESTDIR}${mandir}/man3
-	${INSTALL} -m 444 ${srcdir}/ares_timeout.3 ${DESTDIR}${mandir}/man3
-
-clean:
-	rm -f ${OBJS} $(LIB) adig.o adig ahost.o ahost
-
-distclean: clean
-	rm -f config.cache config.log config.status Makefile

ares/Makefile.inc

@@ -0,0 +1,15 @@
+CSOURCES = ares_fds.c ares_process.c ares_free_hostent.c ares_query.c	   \
+ares__close_sockets.c ares_free_string.c ares_search.c ares__get_hostent.c \
+ares_gethostbyaddr.c ares_send.c ares__read_line.c ares_gethostbyname.c	   \
+ares_strerror.c ares_cancel.c ares_init.c ares_timeout.c ares_destroy.c	   \
+ares_mkquery.c ares_version.c ares_expand_name.c ares_parse_a_reply.c	   \
+windows_port.c ares_expand_string.c ares_parse_ptr_reply.c
+
+HHEADERS = ares.h ares_private.h setup.h ares_dns.h ares_version.h nameser.h
+
+MANPAGES= ares_destroy.3 ares_expand_name.3 ares_expand_string.3 ares_fds.3 \
+ ares_free_hostent.3 ares_free_string.3 ares_gethostbyaddr.3		    \
+ ares_gethostbyname.3 ares_init.3 ares_init_options.3 ares_mkquery.3	    \
+ ares_parse_a_reply.3 ares_parse_ptr_reply.3 ares_process.3		    \
+ ares_query.3 ares_search.3 ares_send.3 ares_strerror.3 ares_timeout.3	    \
+ ares_version.3 ares_cancel.3

ares/Makefile.m32

@@ -0,0 +1,75 @@
+#############################################################
+# $Id$
+#
+## Makefile for building libcares.a with MingW32 (GCC-3.2)
+## Use: make -f Makefile.m32 [demos]
+##
+## Quick hack by Guenter; comments to: /dev/nul
+
+CC = gcc
+AR = ar
+RANLIB = ranlib
+STRIP = strip -g
+#RM = rm -f 
+
+########################################################
+## Nothing more to do below this line!
+
+LIB=libcares.a
+CC=gcc
+#CPPFLAGS=@CPPFLAGS@
+WARN_FLAGS=-Wall
+CFLAGS=-O2
+CFLAGS+=${WARN_CFLAGS} ${ERROR_CFLAGS}
+DEFS=-DMINGW32
+LDFLAGS=-s
+LIBS=-lwsock32
+ALL_CFLAGS=${CPPFLAGS} ${CFLAGS} ${DEFS}
+
+MANPAGES := $(patsubst %.c,%.o,$(wildcard ares_*.3))
+
+OBJS	:= $(patsubst %.c,%.o,$(wildcard ares_*.c))
+OBJS	+= windows_port.o
+
+$(LIB): ${OBJS}
+	ar cru $@ ${OBJS}
+	${RANLIB} $@
+
+all: $(LIB) demos
+
+demos: adig.exe ahost.exe
+
+tags:
+	etags *.[ch]
+
+adig.exe: adig.o $(LIB)
+	${CC} ${LDFLAGS} -o $@ adig.o $(LIB) ${LIBS}
+
+ahost.exe: ahost.o $(LIB)
+	${CC} ${LDFLAGS} -o $@ ahost.o $(LIB) ${LIBS}
+
+${OBJS}: ares.h ares_dns.h ares_private.h
+
+.c.o:
+	${CC} -c ${ALL_CFLAGS} $<
+
+check:
+
+install:
+	${top_srcdir}/mkinstalldirs ${DESTDIR}${libdir}
+	${top_srcdir}/mkinstalldirs ${DESTDIR}${includedir}
+	${top_srcdir}/mkinstalldirs ${DESTDIR}${mandir}/man3
+	${INSTALL} -m 644 $(LIB) ${DESTDIR}${libdir}
+	${RANLIB} ${DESTDIR}${libdir}/$(LIB)
+	chmod u-w ${DESTDIR}${libdir}/$(LIB)
+	${INSTALL} -m 444 ${srcdir}/ares.h ${DESTDIR}${includedir}
+	${INSTALL} -m 444 ${srcdir}/ares_version.h ${DESTDIR}${includedir}
+	(for man in $(MANPAGES); do \
+	   ${INSTALL} -m 444 ${srcdir}/$${man} ${DESTDIR}${mandir}/man3; \
+	done)
+
+clean:
+	rm -f ${OBJS} $(LIB) adig.o adig.exe ahost.o ahost.exe
+
+distclean: clean
+	rm -f config.cache config.log config.status Makefile

ares/Makefile.netware

@@ -0,0 +1,317 @@
+#################################################################
+#
+## Makefile for building libares.lib (NetWare version - gnu make)
+## Use: make -f Makefile.netware
+##
+## Comments to: Guenter Knauf <eflash@gmx.net>
+#
+#################################################################
+
+# Edit the path below to point to the base of your Novell NDK.
+ifndef NDKBASE
+NDKBASE	= c:/novell
+endif
+
+ifndef INSTDIR
+INSTDIR	= ../curl-$(LIBCURL_VERSION_STR)-bin-nw
+endif
+
+# Edit the vars below to change NLM target settings.
+TARGETS = adig.nlm ahost.nlm
+LTARGET = libcares.lib
+VERSION	= $(LIBCARES_VERSION)
+COPYR	= Copyright (c) 1996 - 2004, Daniel Stenberg, <daniel@haxx.se>
+DESCR	= cURL $(subst .def,,$(notdir $@)) $(LIBCARES_VERSION_STR) - http://curl.haxx.se
+MTSAFE	= YES
+STACK	= 64000
+SCREEN	= none
+#EXPORTS	=
+# Comment the line below if you dont want to load protected automatically.
+#LDRING	= 3
+
+# Edit the var below to point to your lib architecture.
+ifndef LIBARCH
+LIBARCH = LIBC
+endif
+
+# must be equal to DEBUG or NDEBUG
+DB	= NDEBUG
+# DB	= DEBUG
+# DB	= CURLDEBUG
+# Optimization: -O<n> or debugging: -g
+ifeq ($(DB),NDEBUG)
+	OPT	= -O2
+	OBJDIR	= release
+else
+	OPT	= -g
+	OBJDIR	= debug
+endif
+
+# Include the version info retrieved from curlver.h
+-include $(OBJDIR)/version.inc
+
+# The following line defines your compiler.
+ifdef METROWERKS
+	CC = mwccnlm
+else
+	CC = gcc
+endif
+YACC	= bison -y
+CP	= cp -afv
+# RM	= rm -f
+# if you want to mark the target as MTSAFE you will need a tool for
+# generating the xdc data for the linker; here's a minimal tool:
+# http://www.gknw.com/development/prgtools/mkxdc.zip
+MPKXDC	= mkxdc
+
+# Global flags for all compilers
+CFLAGS	= $(OPT) -D$(DB) -DNETWARE -DHAVE_CONFIG_H -nostdinc
+
+ifeq ($(CC),mwccnlm)
+LD	= mwldnlm
+LDFLAGS	= -nostdlib $(PRELUDE) $(OBJS) $(<:.def=.o) -o $@ -commandfile
+AR	= mwldnlm
+ARFLAGS	= -type library -w nocmdline $(OBJDIR)/*.o -o
+CFLAGS	+= -msgstyle gcc -gccinc -inline off -opt nointrinsics -proc 586
+CFLAGS	+= -relax_pointers
+#CFLAGS	+= -w on
+ifeq ($(LIBARCH),LIBC)
+	PRELUDE = $(SDK_LIBC)/imports/libcpre.o
+	CFLAGS += -align 4
+else
+	PRELUDE = "$(METROWERKS)/Novell Support/libraries/runtime/prelude.obj"
+#	CFLAGS += -include "$(METROWERKS)/Novell Support/headers/nlm_prefix.h"
+	CFLAGS += -align 1
+endif
+else
+LD	= nlmconv
+LDFLAGS	= -T
+AR	= ar
+ARFLAGS	= -cq
+CFLAGS	+= -fno-builtin -fpack-struct -fpcc-struct-return
+CFLAGS	+= -Wall -Wno-format # -pedantic
+ifeq ($(LIBARCH),LIBC)
+	PRELUDE = $(SDK_LIBC)/imports/libcpre.gcc.o
+else
+	PRELUDE = $(SDK_CLIB)/imports/clibpre.gcc.o
+	CFLAGS += -include $(NDKBASE)/nlmconv/genlm.h
+endif
+endif
+
+NDK_ROOT = $(NDKBASE)/ndk
+SDK_CLIB = $(NDK_ROOT)/nwsdk
+SDK_LIBC = $(NDK_ROOT)/libc
+
+ifeq ($(LIBARCH),LIBC)
+	INCLUDES += -I$(SDK_LIBC)/include -I$(SDK_LIBC)/include/nks
+	INCLUDES += -I$(SDK_LIBC)/include/winsock
+	CFLAGS += -D_POSIX_SOURCE
+#	CFLAGS += -D__ANSIC__
+else
+	INCLUDES += -I$(SDK_CLIB)/include/nlm -I$(SDK_CLIB)/include
+	# INCLUDES += -I$(SDK_CLIB)/include/nlm/obsolete
+	CFLAGS += -DNETDB_USE_INTERNET
+endif
+CFLAGS	+= -I. $(INCLUDES)
+
+ifeq ($(MTSAFE),YES)
+	XDCOPT = -n
+endif
+ifeq ($(MTSAFE),NO)
+	XDCOPT = -u
+endif
+
+ifeq ($(findstring linux,$(OSTYPE)),linux)
+DL	= '
+#-include $(NDKBASE)/nlmconv/ncpfs.inc
+endif
+
+OBJS	:= $(patsubst %.c,$(OBJDIR)/%.o,$(wildcard ares_*.c))
+
+.PHONY: lib nlm prebuild dist install clean
+
+lib: prebuild $(LTARGET)
+
+nlm: prebuild $(TARGETS) 
+
+prebuild: $(OBJDIR) $(OBJDIR)/version.inc config.h arpa/nameser.h
+
+dist: all
+	-$(RM) $(OBJS) $(OBJDIR)/*.map $(OBJDIR)/*.ncv
+	-$(RM) $(OBJDIR)/*.def $(OBJDIR)/*.xdc $(OBJDIR)/version.inc
+
+install: $(INSTDIR) all
+	@$(CP) *.nlm $(INSTDIR)
+	@$(CP) ../CHANGES $(INSTDIR)
+	@$(CP) ../COPYING $(INSTDIR)
+	@$(CP) ../README $(INSTDIR)
+	@$(CP) ../RELEASE-NOTES $(INSTDIR)
+
+clean:
+	-$(RM) $(LTARGET) $(TARGETS) config.h
+	-$(RM) -r $(OBJDIR)
+	-$(RM) -r arpa
+
+%.lib: $(OBJS)
+	@echo Creating $@
+	@-$(RM) $@
+	@$(AR) $(ARFLAGS) $@ $^
+
+%.nlm: $(OBJDIR)/%.def $(OBJDIR)/%.o $(OBJDIR)/%.xdc $(OBJS)
+	@echo Linking $@
+	@-$(RM) $@
+	@$(LD) $(LDFLAGS) $<
+
+$(INSTDIR):
+	@mkdir $(INSTDIR)
+
+$(OBJDIR):
+	@mkdir $(OBJDIR)
+
+$(OBJDIR)/%.o: %.c
+#	@echo Compiling $<
+	$(CC) $(CFLAGS) -c $< -o $@
+
+$(OBJDIR)/version.inc: ares_version.h $(OBJDIR)
+	@echo Creating $@
+	@awk -f ../packages/NetWare/get_ver.awk $< > $@
+
+$(OBJDIR)/%.xdc: Makefile.netware
+	@echo Creating $@
+	@$(MPKXDC) $(XDCOPT) $@
+
+$(OBJDIR)/%.def: Makefile.netware
+	@echo Creating $@
+	@echo $(DL)# DEF file for linking with $(LD)$(DL) > $@
+	@echo $(DL)# Do not edit this file - it is created by make!$(DL) >> $@
+	@echo $(DL)# All your changes will be lost!!$(DL) >> $@
+	@echo $(DL)#$(DL) >> $@
+	@echo $(DL)copyright "$(COPYR)"$(DL) >> $@
+	@echo $(DL)description "$(DESCR)"$(DL) >> $@
+	@echo $(DL)version $(VERSION)$(DL) >> $@
+ifdef NLMTYPE
+	@echo $(DL)type $(NLMTYPE)$(DL) >> $@
+endif
+ifdef STACK
+	@echo $(DL)stack $(STACK)$(DL) >> $@
+endif
+ifdef SCREEN
+	@echo $(DL)screenname "$(SCREEN)"$(DL) >> $@
+else
+	@echo $(DL)screenname "DEFAULT"$(DL) >> $@
+endif
+ifeq ($(DB),DEBUG)
+	@echo $(DL)debug$(DL) >> $@
+endif
+	@echo $(DL)threadname "$^"$(DL) >> $@
+ifdef XDCOPT
+	@echo $(DL)xdcdata $(@:.def=.xdc)$(DL) >> $@
+endif
+ifeq ($(LDRING),0)
+	@echo $(DL)flag_on 16$(DL) >> $@
+endif
+ifeq ($(LDRING),3)
+	@echo $(DL)flag_on 512$(DL) >> $@
+endif
+ifeq ($(LIBARCH),CLIB)
+	@echo $(DL)start _Prelude$(DL) >> $@
+	@echo $(DL)exit _Stop$(DL) >> $@
+	@echo $(DL)import @$(SDK_CLIB)/imports/clib.imp$(DL) >> $@
+	@echo $(DL)import @$(SDK_CLIB)/imports/threads.imp$(DL) >> $@
+	@echo $(DL)import @$(SDK_CLIB)/imports/nlmlib.imp$(DL) >> $@
+	@echo $(DL)import @$(SDK_CLIB)/imports/socklib.imp$(DL) >> $@
+	@echo $(DL)module clib$(DL) >> $@
+else
+	@echo $(DL)flag_on 64$(DL) >> $@
+	@echo $(DL)pseudopreemption$(DL) >> $@
+	@echo $(DL)start _LibCPrelude$(DL) >> $@
+	@echo $(DL)exit _LibCPostlude$(DL) >> $@
+	@echo $(DL)check _LibCCheckUnload$(DL) >> $@
+	@echo $(DL)import @$(SDK_LIBC)/imports/libc.imp$(DL) >> $@
+	@echo $(DL)import @$(SDK_LIBC)/imports/netware.imp$(DL) >> $@
+	@echo $(DL)module libc$(DL) >> $@
+endif
+ifdef MODULES
+	@echo $(DL)module $(MODULES)$(DL) >> $@
+endif
+ifdef EXPORTS
+	@echo $(DL)export $(EXPORTS)$(DL) >> $@
+endif
+ifdef IMPORTS
+	@echo $(DL)import $(IMPORTS)$(DL) >> $@
+endif
+ifeq ($(LD),nlmconv)
+	@echo $(DL)input $(OBJS)$(DL) >> $@
+	@echo $(DL)input $(PRELUDE)$(DL) >> $@
+	@echo $(DL)output $(notdir $(@:.def=.nlm))$(DL) >> $@
+endif
+
+config.h: Makefile.netware
+	@echo Creating $@
+	@echo $(DL)/* $@ for NetWare target.$(DL) > $@
+	@echo $(DL)** Do not edit this file - it is created by make!$(DL) >> $@
+	@echo $(DL)** All your changes will be lost!!$(DL) >> $@
+	@echo $(DL)*/$(DL) >> $@
+	@echo $(DL)#define OS "i586-pc-NetWare"$(DL) >> $@
+	@echo $(DL)#define VERSION "$(LIBCURL_VERSION_STR)"$(DL) >> $@
+	@echo $(DL)#define PACKAGE_BUGREPORT "curl-bug@haxx.se"$(DL) >> $@
+	@echo $(DL)#define HAVE_ARPA_INET_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_ASSERT_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_DLFCN_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_DLOPEN 1$(DL) >> $@
+	@echo $(DL)#define HAVE_ERR_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_FCNTL_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_FIONBIO 1$(DL) >> $@
+	@echo $(DL)#define HAVE_GETHOSTBYADDR 1$(DL) >> $@
+	@echo $(DL)#define HAVE_GETTIMEOFDAY 1$(DL) >> $@
+	@echo $(DL)#define HAVE_INET_ADDR 1$(DL) >> $@
+	@echo $(DL)#define HAVE_INET_NTOA 1$(DL) >> $@
+	@echo $(DL)#define HAVE_INET_PTON 1$(DL) >> $@
+	@echo $(DL)#define HAVE_INTTYPES_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_LIMITS_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_LONGLONG 1$(DL) >> $@
+	@echo $(DL)#define HAVE_MALLOC_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_NETINET_IN_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SELECT 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SETJMP_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SIGNAL 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SOCKET 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STDINT_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STDLIB_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRCASECMP 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRDUP 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRFTIME 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRING_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRLCAT 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRLCPY 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRSTR 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SYS_PARAM_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SYS_SELECT_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SYS_STAT_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SYS_TIME_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_TERMIOS_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_TIME_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_UNAME 1$(DL) >> $@
+	@echo $(DL)#define HAVE_UNISTD_H 1$(DL) >> $@
+	@echo $(DL)#define RETSIGTYPE void$(DL) >> $@
+	@echo $(DL)#define SIZEOF_CURL_OFF_T 4$(DL) >> $@
+	@echo $(DL)#define STDC_HEADERS 1$(DL) >> $@
+	@echo $(DL)#define TIME_WITH_SYS_TIME 1$(DL) >> $@
+ifdef NW_WINSOCK
+	@echo $(DL)#define HAVE_CLOSESOCKET 1$(DL) >> $@
+else
+	@echo $(DL)#define HAVE_SYS_TYPES_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SYS_SOCKET_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_SYS_SOCKIO_H 1$(DL) >> $@
+	@echo $(DL)#define HAVE_NETDB_H 1$(DL) >> $@
+endif
+ifdef OLD_NOVELLSDK
+	@echo $(DL)#define socklen_t int$(DL) >> $@
+endif
+
+arpa/nameser.h: nameser.h
+	@echo Fix missing header $@
+	@-mkdir arpa
+	@$(CP) $< arpa
+
+

ares/NEWS

@@ -1,3 +1,6 @@
+Major changes since:
+* see the CHANGES file
+
 Major changes in release 1.1.1:
 * ares should now compile as C++ code (no longer uses reserved word
   "class").

ares/README.cares

@@ -1,19 +1,21 @@
+c-ares
+======
 
-This package is based on ares 1.1.1 (written by Greg Hudson). I've decided to
-put together and release my own ares archives since the ares maintainer
-doesn't want these improvements.
+This package is based on ares 1.1.1 (written by Greg Hudson). I decided to
+fork and release a separate project since the ares author didn't want the
+improvements that were vital for our use of it.
 
-The package is thus dubbed 'c-ares' since I (Daniel Stenberg) want this for
-use within the curl project (hence the letter C) and it makes a nice
-pun. Also, c-ares will not remain API compatible with the original ares, so
-picking a new name makes it more obvious to the public.
+This package is dubbed 'c-ares' since I (Daniel Stenberg) wanted this for use
+within the curl project (hence the letter C) and it makes a nice pun. Also,
+c-ares is not API compatible with ares: a new name makes that more obvious to
+the public.
 
 The full source code is available in the 'c-ares' release archives, and in the
 'ares' subdir of the curl CVS source repostitory.
 
 If you find bugs, correct flaws, have questions or have comments in general in
 regard to c-ares (or by all means the original ares too), get in touch with us
-on the curl-library mailing list.
+on the c-ares mailing list: http://cool.haxx.se/mailman/listinfo/c-ares
 
 c-ares is of course distributed under the same MIT-style license as the
 original ares.

ares/adig.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ahost.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares.h

@@ -20,7 +20,7 @@
 
 #include <sys/types.h>
 
-#ifdef _AIX
+#if defined(_AIX) || defined(NETWARE)
 /* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish
    libc5-based Linux systems. Only include it on system that are known to
    require it! */
@@ -55,6 +55,7 @@
 #define ARES_EFILE		14
 #define ARES_ENOMEM		15
 #define ARES_EDESTRUCTION	16
+#define ARES_EBADSTR		17
 
 /* Flag values */
 #define ARES_FLAG_USEVC		(1 << 0)
@@ -104,7 +105,7 @@ int ares_init(ares_channel *channelptr);
 int ares_init_options(ares_channel *channelptr, struct ares_options *options,
 		      int optmask);
 void ares_destroy(ares_channel channel);
-
+void ares_cancel(ares_channel channel);
 void ares_send(ares_channel channel, const unsigned char *qbuf, int qlen,
 	       ares_callback callback, void *arg);
 void ares_query(ares_channel channel, const char *name, int dnsclass,
@@ -125,6 +126,8 @@ int ares_mkquery(const char *name, int dnsclass, int type, unsigned short id,
 		 int rd, unsigned char **buf, int *buflen);
 int ares_expand_name(const unsigned char *encoded, const unsigned char *abuf,
 		     int alen, char **s, long *enclen);
+int ares_expand_string(const unsigned char *encoded, const unsigned char *abuf,
+		     int alen, unsigned char **s, long *enclen);
 int ares_parse_a_reply(const unsigned char *abuf, int alen,
 		       struct hostent **host);
 int ares_parse_ptr_reply(const unsigned char *abuf, int alen, const void *addr,

ares/ares__close_sockets.c

@@ -13,6 +13,8 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
+
 #include <stdlib.h>
 #ifdef WIN32
 #else
@@ -42,14 +44,14 @@ void ares__close_sockets(struct server_state *server)
   server->tcp_lenbuf_pos = 0;
 
   /* Close the TCP and UDP sockets. */
-  if (server->tcp_socket != -1)
+  if (server->tcp_socket != ARES_SOCKET_BAD)
     {
       closesocket(server->tcp_socket);
-      server->tcp_socket = -1;
+      server->tcp_socket = ARES_SOCKET_BAD;
     }
-  if (server->udp_socket != -1)
+  if (server->udp_socket != ARES_SOCKET_BAD)
     {
       closesocket(server->udp_socket);
-      server->udp_socket = -1;
+      server->udp_socket = ARES_SOCKET_BAD;
     }
 }

ares/ares__get_hostent.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32
@@ -143,25 +144,29 @@ int ares__get_hostent(FILE *fp, struct hostent **host)
       free(line);
       return ARES_SUCCESS;
     }
-  free(line);
+  if(line)
+    free(line);
 
   if (status == ARES_SUCCESS)
     {
       /* Memory allocation failure; clean up. */
       if (hostent)
 	{
-	  free((char *) hostent->h_name);
+          if(hostent->h_name)
+            free((char *) hostent->h_name);
 	  if (hostent->h_aliases)
 	    {
 	      for (alias = hostent->h_aliases; *alias; alias++)
 		free(*alias);
 	    }
-	  free(hostent->h_aliases);
-	  if (hostent->h_addr_list)
+          if(hostent->h_aliases)
+            free(hostent->h_aliases);
+	  if (hostent->h_addr_list && hostent->h_addr_list[0])
 	    free(hostent->h_addr_list[0]);
-	  free(hostent->h_addr_list);
+          if(hostent->h_addr_list)
+            free(hostent->h_addr_list);
+          free(hostent);
 	}
-      free(hostent);
       return ARES_ENOMEM;
     }
 

ares/ares__read_line.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>

ares/ares_cancel.3

@@ -0,0 +1,37 @@
+.\" $Id$
+.\"
+.\" Copyright 1998 by the Massachusetts Institute of Technology.
+.\"
+.\" Permission to use, copy, modify, and distribute this
+.\" software and its documentation for any purpose and without
+.\" fee is hereby granted, provided that the above copyright
+.\" notice appear in all copies and that both that copyright
+.\" notice and this permission notice appear in supporting
+.\" documentation, and that the name of M.I.T. not be used in
+.\" advertising or publicity pertaining to distribution of the
+.\" software without specific, written prior permission.
+.\" M.I.T. makes no representations about the suitability of
+.\" this software for any purpose.  It is provided "as is"
+.\" without express or implied warranty.
+.\"
+.TH ARES_CANCEL 3 "31 March 2004"
+.SH NAME
+ares_cancel \- Cancel a resolve
+.SH SYNOPSIS
+.nf
+.B #include <ares.h>
+.PP
+.B int ares_cancel(ares_channel \fIchannel\fP)
+.fi
+.SH DESCRIPTION
+The \fBares_cancel\fP function cancels all lookups/requests made on the the
+name service channel identified by \fIchannel\fP.  \fBares_cancel\fP invokes
+the callbacks for each pending query on the channel, passing a status of
+.BR ARES_ETIMEOUT .
+These calls give the callbacks a chance to clean up any state which
+might have been stored in their arguments.
+.SH SEE ALSO
+.BR ares_init (3)
+.BR ares_destroy (3)
+.SH AUTHOR
+Dirk Manske

ares/ares_cancel.c

@@ -0,0 +1,43 @@
+/* Copyright (C) 2004 by Daniel Stenberg et al
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation for any purpose and without fee is hereby granted, provided
+ * that the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  M.I.T. makes no representations about the
+ * suitability of this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+#include <stdlib.h>
+#include "ares.h"
+#include "ares_private.h"
+
+/*
+ * ares_cancel() cancels a ongoing request/resolve that might be going on on
+ * the given channel. It does NOT kill the channel, use ares_destroy() for
+ * that.
+ */
+void ares_cancel(ares_channel channel)
+{
+  struct query *query, *next;
+  int i;
+
+  for (query = channel->queries; query; query = next)
+  {
+    next = query->next;
+    query->callback(query->arg, ARES_ETIMEOUT, NULL, 0);
+    free(query->tcpbuf);
+    free(query->skip_server);
+    free(query);
+  }
+  channel->queries = NULL;
+  if (!(channel->flags & ARES_FLAG_STAYOPEN))
+  {
+    for (i = 0; i < channel->nservers; i++)
+      ares__close_sockets(&channel->servers[i]);
+  }
+}

ares/ares_destroy.3

@@ -36,7 +36,8 @@ status of
 These calls give the callbacks a chance to clean up any state which
 might have been stored in their arguments.
 .SH SEE ALSO
-.BR ares_init (3)
+.BR ares_init (3),
+.BR ares_cancel (3)
 .SH AUTHOR
 Greg Hudson, MIT Information Systems
 .br

ares/ares_destroy.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <stdlib.h>
 #include "ares.h"
 #include "ares_private.h"

ares/ares_expand_name.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares_expand_string.3

@@ -0,0 +1,62 @@
+.\" $Id$
+.\"
+.\" Copyright 1998 by the Massachusetts Institute of Technology.
+.\"
+.\" Permission to use, copy, modify, and distribute this
+.\" software and its documentation for any purpose and without
+.\" fee is hereby granted, provided that the above copyright
+.\" notice appear in all copies and that both that copyright
+.\" notice and this permission notice appear in supporting
+.\" documentation, and that the name of M.I.T. not be used in
+.\" advertising or publicity pertaining to distribution of the
+.\" software without specific, written prior permission.
+.\" M.I.T. makes no representations about the suitability of
+.\" this software for any purpose.  It is provided "as is"
+.\" without express or implied warranty.
+.\"
+.TH ARES_EXPAND_NAME 3 "23 July 1998"
+.SH NAME
+ares_expand_string \- Expand a length encoded string
+.SH SYNOPSIS
+.nf
+.B #include <ares.h>
+.PP
+.B int ares_expand_string(const unsigned char *\fIencoded\fP,
+.B      const unsigned char *\fIabuf\fP, int \fIalen\fP, unsigned char **\fIs\fP,
+.B 	int *\fIenclen\fP)
+.fi
+.SH DESCRIPTION
+The
+.B ares_expand_string
+function converts a length encoded string to a NULL terminated C
+string.  The argument
+.I encoded
+gives the beginning of the encoded string, and the arguments
+.I abuf
+and
+.I alen
+give the containing message buffer (necessary for the processing of
+indirection pointers within the encoded domain name).  The result is
+placed in a NUL-terminated allocated buffer, a pointer to which is
+stored in the variable pointed to by
+.IR s .
+The length of the encoded string is stored in the variable pointed to by
+.I enclen
+so that the caller can advance past the encoded string to read
+further data in the message.
+.SH RETURN VALUES
+.B ares_expand_string
+can return any of the following values:
+.TP 15
+.B ARES_SUCCESS
+Expansion of the encoded string succeeded.
+.TP 15
+.B ARES_EBADSTR
+The encoded string was malformed and could not be expanded.
+.TP 15
+.B ARES_ENOMEM
+Memory was exhausted.
+.SH SEE ALSO
+.BR ares_free_string (3)
+.SH AUTHOR
+Dominick Meglio

ares/ares_expand_string.c

@@ -0,0 +1,66 @@
+/* Copyright 1998 by the Massachusetts Institute of Technology.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+#include <sys/types.h>
+
+#ifdef WIN32
+#include "nameser.h"
+#else
+#include <netinet/in.h>
+#include <arpa/nameser.h>
+#endif
+
+#include <string.h>
+#include <stdlib.h>
+#include "ares.h"
+#include "ares_private.h" /* for the memdebug */
+
+/* Simply decodes a length-encoded character string. The first byte of the
+ * input is the length of the string to be returned and the bytes thereafter
+ * are the characters of the string. The returned result will be NULL
+ * terminated.
+ */
+int ares_expand_string(const unsigned char *encoded,
+                       const unsigned char *abuf,
+                       int alen,
+                       unsigned char **s,
+                       long *enclen)
+{
+  unsigned char *q;
+  long len;
+  if (encoded == abuf+alen)
+    return ARES_EBADSTR;
+
+  len = *encoded;
+  if (encoded+len+1 > abuf+alen)
+    return ARES_EBADSTR;
+
+  encoded++;
+
+  *s = malloc(len+1);
+  if (*s == NULL)
+    return ARES_ENOMEM;
+  q = *s; 
+  strncpy((char *)q, (char *)encoded, len);
+  q[len] = '\0';
+
+  *s = q;
+
+  *enclen = len+1; 
+
+  return ARES_SUCCESS;
+}
+

ares/ares_fds.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32
@@ -37,13 +38,13 @@ int ares_fds(ares_channel channel, fd_set *read_fds, fd_set *write_fds)
   for (i = 0; i < channel->nservers; i++)
     {
       server = &channel->servers[i];
-      if (server->udp_socket != -1)
+      if (server->udp_socket != ARES_SOCKET_BAD)
 	{
 	  FD_SET(server->udp_socket, read_fds);
 	  if (server->udp_socket >= nfds)
 	    nfds = server->udp_socket + 1;
 	}
-      if (server->tcp_socket != -1)
+      if (server->tcp_socket != ARES_SOCKET_BAD)
 	{
 	  FD_SET(server->tcp_socket, read_fds);
 	  if (server->qhead)

ares/ares_free_hostent.3

@@ -28,21 +28,16 @@ The
 .I ares_free_hostent
 function frees a
 .B struct hostent
-allocated by one of the functions
-.I ares_parse_a_reply
-or
-.IR ares_parse_ptr_reply .
+allocated by one of the functions \fIares_parse_a_reply(3)\fP or
+\fIares_parse_ptr_reply(3)\fP.
+.SH NOTES
+It is not necessary (and is not correct) to free the host structure passed to
+the callback functions for \fIares_gethostbyname(3)\fP or
+\fIares_gethostbyaddr(3)\fP. The ares library will automatically free such
+host structures when the callback returns.
 .SH SEE ALSO
 .BR ares_parse_a_reply (3),
 .BR ares_parse_ptr_reply (3)
-.SH NOTES
-It is not necessary (and is not correct) to free the host structure
-passed to the callback functions for
-.I ares_gethostbyname
-or
-.IR ares_gethostbyaddr .
-The ares library will automatically free such host structures when the
-callback returns.
 .SH AUTHOR
 Greg Hudson, MIT Information Systems
 .br

ares/ares_free_hostent.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <stdlib.h>
 
 #ifdef WIN32

ares/ares_free_string.3

@@ -26,11 +26,10 @@ ares_free_string \- Free strings allocated by ares functions
 .SH DESCRIPTION
 The
 .I ares_free_string
-function frees a string allocated by the
-.I ares_mkquery
-function.
+function frees a string allocated by an ares function.
 .SH SEE ALSO
 .BR ares_mkquery (3)
+.BR ares_expand_string (3)
 .SH AUTHOR
 Greg Hudson, MIT Information Systems
 .br

ares/ares_free_string.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <stdlib.h>
 #include "ares.h"
 

ares/ares_gethostbyaddr.3

@@ -40,14 +40,10 @@ and
 .I addrlen
 give the address as a series of bytes, and
 .I family
-gives the type of address.  When the query is complete or has failed,
-the ares library will invoke
-.IR callback .
-Completion or failure of the query may happen immediately, or may
-happen during a later call to
-.BR ares_process (3)
-or
-.BR ares_destroy (3).
+gives the type of address.  When the query is complete or has failed, the ares
+library will invoke \fIcallback\fP.  Completion or failure of the query may
+happen immediately, or may happen during a later call to
+\fIares_process(3)\fP, \fIares_destroy(3)\fP or \fIares_cancel(3)\fP.
 .PP
 The callback argument
 .I arg
@@ -93,7 +89,8 @@ did not complete successfully,
 will be
 .BR NULL .
 .SH SEE ALSO
-.BR ares_process (3)
+.BR ares_process (3),
+.BR ares_gethostbyname (3)
 .SH AUTHOR
 Greg Hudson, MIT Information Systems
 .br

ares/ares_gethostbyaddr.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32
@@ -87,10 +88,10 @@ static void next_lookup(struct addr_query *aquery)
 	{
 	case 'b':
 	  addr = ntohl(aquery->addr.s_addr);
-	  a1 = (int)(addr >> 24) & 0xff;
-	  a2 = (int)(addr >> 16) & 0xff;
-	  a3 = (int)(addr >> 8) & 0xff;
-	  a4 = (int)addr & 0xff;
+	  a1 = (int)((addr >> 24) & 0xff);
+	  a2 = (int)((addr >> 16) & 0xff);
+	  a3 = (int)((addr >> 8) & 0xff);
+	  a4 = (int)(addr & 0xff);
 	  sprintf(name, "%d.%d.%d.%d.in-addr.arpa", a4, a3, a2, a1);
 	  aquery->remaining_lookups = p + 1;
 	  ares_query(aquery->channel, name, C_IN, T_PTR, addr_callback,
@@ -151,6 +152,12 @@ static int file_lookup(struct in_addr *addr, struct hostent **host)
     strcat(PATH_HOSTS, PATH_HOSTS_9X);
   }
 
+#elif defined(WATT32)
+  extern const char *_w32_GetHostsFile (void);
+  const char *PATH_HOSTS = _w32_GetHostsFile();
+
+  if (!PATH_HOSTS)
+    return ARES_ENOTFOUND;
 #endif
 
   fp = fopen(PATH_HOSTS, "r");

ares/ares_gethostbyname.3

@@ -37,14 +37,11 @@ The parameter
 .I name
 gives the hostname as a NUL-terminated C string, and
 .I family
-gives the desired type of address for the resulting host entry.  When
-the query is complete or has failed, the ares library will invoke
-.IR callback .
-Completion or failure of the query may happen immediately, or may
-happen during a later call to
-.BR ares_process (3)
-or
-.BR ares_destroy (3).
+gives the desired type of address for the resulting host entry.  When the
+query is complete or has failed, the ares library will invoke \fIcallback\fP.
+Completion or failure of the query may happen immediately, or may happen
+during a later call to \fIares_process(3)\fP, \fIares_destroy(3)\fP or
+\fIares_cancel(3)\fP.
 .PP
 The callback argument
 .I arg
@@ -96,7 +93,8 @@ did not complete successfully,
 will be
 .BR NULL .
 .SH SEE ALSO
-.BR ares_process (3)
+.BR ares_process (3),
+.BR ares_gethostbyaddr (3)
 .SH AUTHOR
 Greg Hudson, MIT Information Systems
 .br

ares/ares_gethostbyname.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32
@@ -224,6 +225,12 @@ static int file_lookup(const char *name, struct hostent **host)
     strcat(PATH_HOSTS, PATH_HOSTS_9X);
   }
 
+#elif defined(WATT32)
+  extern const char *_w32_GetHostsFile (void);
+  const char *PATH_HOSTS = _w32_GetHostsFile();
+
+  if (!PATH_HOSTS)
+    return ARES_ENOTFOUND;
 #endif
 
   fp = fopen(PATH_HOSTS, "r");

ares/ares_init.c

@@ -13,10 +13,13 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32
 #include "nameser.h"
+#include <iphlpapi.h>
+#include <malloc.h>
 #else
 #include <sys/param.h>
 #include <sys/time.h>
@@ -85,6 +88,8 @@ int ares_init_options(ares_channel *channelptr, struct ares_options *options,
   channel->nsort = -1;
   channel->lookups = NULL;
   channel->queries = NULL;
+  channel->domains = NULL;
+  channel->sortlist = NULL;
 
   /* Initialize configuration by each of the four sources, from highest
    * precedence to lowest.
@@ -101,15 +106,16 @@ int ares_init_options(ares_channel *channelptr, struct ares_options *options,
       /* Something failed; clean up memory we may have allocated. */
       if (channel->nservers != -1)
 	free(channel->servers);
-      if (channel->ndomains != -1)
+      if (channel->domains)
 	{
 	  for (i = 0; i < channel->ndomains; i++)
 	    free(channel->domains[i]);
 	  free(channel->domains);
 	}
-      if (channel->nsort != -1)
+      if (channel->sortlist)
 	free(channel->sortlist);
-      free(channel->lookups);
+      if(channel->lookups)
+        free(channel->lookups);
       free(channel);
       return status;
     }
@@ -122,8 +128,8 @@ int ares_init_options(ares_channel *channelptr, struct ares_options *options,
   for (i = 0; i < channel->nservers; i++)
     {
       server = &channel->servers[i];
-      server->udp_socket = -1;
-      server->tcp_socket = -1;
+      server->udp_socket = ARES_SOCKET_BAD;
+      server->tcp_socket = ARES_SOCKET_BAD;
       server->tcp_lenbuf_pos = 0;
       server->tcp_buffer = NULL;
       server->qhead = NULL;
@@ -228,24 +234,24 @@ static int init_by_environment(ares_channel channel)
 
   return ARES_SUCCESS;
 }
-#ifdef WIN32
-static int get_res_size_nt(HKEY hKey, char *subkey, int *size)
-{
-  return RegQueryValueEx(hKey, subkey, 0, NULL, NULL, size);
-}
 
-/* Warning: returns a dynamically allocated buffer, the user MUST
+#ifdef WIN32
+/*
+ * Warning: returns a dynamically allocated buffer, the user MUST
  * use free() if the function returns 1
  */
-static int get_res_nt(HKEY hKey, char *subkey, char **obuf)
+static int get_res_nt(HKEY hKey, const char *subkey, char **obuf)
 {
   /* Test for the size we need */
-  int size = 0;
+  DWORD size = 0;
   int result;
+
   result = RegQueryValueEx(hKey, subkey, 0, NULL, NULL, &size);
   if ((result != ERROR_SUCCESS && result != ERROR_MORE_DATA) || !size)
     return 0;
   *obuf = malloc(size+1);
+  if (!*obuf)
+    return 0;
 
   if (RegQueryValueEx(hKey, subkey, 0, NULL, *obuf, &size) != ERROR_SUCCESS)
   {
@@ -260,29 +266,99 @@ static int get_res_nt(HKEY hKey, char *subkey, char **obuf)
   return 1;
 }
 
-static int get_res_interfaces_nt(HKEY hKey, char *subkey, char **obuf)
+static int get_res_interfaces_nt(HKEY hKey, const char *subkey, char **obuf)
 {
   char enumbuf[39]; /* GUIDs are 38 chars + 1 for NULL */
-  int enum_size = 39;
+  DWORD enum_size = 39;
   int idx = 0;
   HKEY hVal;
+
   while (RegEnumKeyEx(hKey, idx++, enumbuf, &enum_size, 0,
                       NULL, NULL, NULL) != ERROR_NO_MORE_ITEMS)
   {
+    int rc;
+
     enum_size = 39;
     if (RegOpenKeyEx(hKey, enumbuf, 0, KEY_QUERY_VALUE, &hVal) !=
         ERROR_SUCCESS)
       continue;
-    if (!get_res_nt(hVal, subkey, obuf))
-      RegCloseKey(hVal);
-    else
-    {
+    rc = get_res_nt(hVal, subkey, obuf);
       RegCloseKey(hVal);
+    if (rc)
       return 1;
     }
-  }
   return 0;
 }
+
+static int get_iphlpapi_dns_info (char *ret_buf, size_t ret_size)
+{
+  FIXED_INFO    *fi   = alloca (sizeof(*fi));
+  DWORD          size = sizeof (*fi);
+  DWORD WINAPI (*GetNetworkParams) (FIXED_INFO*, DWORD*);  /* available only on Win-98/2000+ */
+  HMODULE        handle;
+  IP_ADDR_STRING *ipAddr;
+  int            i, count = 0;
+  int            debug  = 0;
+  size_t         ip_size = sizeof("255.255.255.255,")-1;
+  size_t         left = ret_size;
+  char          *ret = ret_buf;
+
+  if (!fi)
+     return (0);
+
+  handle = LoadLibrary ("iphlpapi.dll");
+  if (!handle)
+     return (0);
+
+  (void*)GetNetworkParams = GetProcAddress (handle, "GetNetworkParams");
+  if (!GetNetworkParams)
+     goto quit;
+
+  if ((*GetNetworkParams) (fi, &size) != ERROR_BUFFER_OVERFLOW)
+     goto quit;
+
+  fi = alloca (size);
+  if (!fi || (*GetNetworkParams) (fi, &size) != ERROR_SUCCESS)
+     goto quit;
+
+  if (debug)
+  {
+    printf ("Host Name: %s\n", fi->HostName);
+    printf ("Domain Name: %s\n", fi->DomainName);
+    printf ("DNS Servers:\n"
+            "    %s (primary)\n", fi->DnsServerList.IpAddress.String);
+  }
+  if (inet_addr(fi->DnsServerList.IpAddress.String) != INADDR_NONE &&
+      left > ip_size)
+  {
+    ret += sprintf (ret, "%s,", fi->DnsServerList.IpAddress.String);
+    left -= ret - ret_buf;
+    count++;
+  }
+
+  for (i = 0, ipAddr = fi->DnsServerList.Next; ipAddr && left > ip_size;
+       ipAddr = ipAddr->Next, i++)
+  {
+    if (inet_addr(ipAddr->IpAddress.String) != INADDR_NONE)
+    {
+       ret += sprintf (ret, "%s,", ipAddr->IpAddress.String);
+       left -= ret - ret_buf;
+       count++;
+    }
+    if (debug)
+       printf ("    %s (secondary %d)\n", ipAddr->IpAddress.String, i+1);
+  }
+
+quit:
+  if (handle)
+     FreeLibrary (handle);
+
+  if (debug && left <= ip_size)
+     printf ("Too many nameservers. Truncating to %d addressess", count);
+  if (ret > ret_buf)
+     ret[-1] = '\0';
+  return (count);
+}
 #endif
 
 static int init_by_resolv_conf(ares_channel channel)
@@ -295,6 +371,11 @@ static int init_by_resolv_conf(ares_channel channel)
 #ifdef WIN32
 
     /*
+  NameServer info via IPHLPAPI (IP helper API):
+    GetNetworkParams() should be the trusted source for this.
+    Available in Win-98/2000 and later. If that fail, fall-back to
+    registry information.
+
   NameServer Registry:
 
    On Windows 9X, the DNS server can be found in:
@@ -317,11 +398,19 @@ DhcpNameServer
   DWORD data_type;
   DWORD bytes;
   DWORD result;
-  DWORD keysize = MAX_PATH;
+  char  buf[256];
 
-  status = ARES_EFILE;
+  if (channel->nservers > -1)  /* don't override ARES_OPT_SERVER */
+     return ARES_SUCCESS;
 
-  if (IsNT) 
+  if (get_iphlpapi_dns_info(buf,sizeof(buf)) > 0)
+  {
+    status = config_nameserver(&servers, &nservers, buf);
+    if (status == ARES_SUCCESS)
+      goto okay;
+  }
+
+  if (IsNT)
   {
     if (RegOpenKeyEx(
           HKEY_LOCAL_MACHINE, WIN_NS_NT_KEY, 0,
@@ -365,7 +454,7 @@ DhcpNameServer
       if ((result = RegQueryValueEx(
              mykey, NAMESERVER, NULL, &data_type,
              NULL, &bytes
-             ) 
+             )
             ) == ERROR_SUCCESS ||
           result == ERROR_MORE_DATA)
       {
@@ -381,19 +470,12 @@ DhcpNameServer
           free(line);
         }
       }
-    } 
+    }
     RegCloseKey(mykey);
   }
-  
-  if (status != ARES_EFILE)
-  {
-    /*
-      if (!channel->lookups) {
-      status = config_lookup(channel, "file bind");
-      }
-    */
+
+  if (status == ARES_SUCCESS)
     status = ARES_EOF;
-  }
 
 #elif defined(riscos)
 
@@ -401,7 +483,7 @@ DhcpNameServer
      system variable Inet$Resolvers, space separated. */
 
   line = getenv("Inet$Resolvers");
-  status = ARES_EFILE;
+  status = ARES_EOF;
   if (line) {
     char *resolvers = strdup(line), *pos, *space;
 
@@ -421,26 +503,44 @@ DhcpNameServer
 
     if (status == ARES_SUCCESS)
       status = ARES_EOF;
-    
+
     free(resolvers);
   }
 
+#elif defined(WATT32)
+  int i;
+
+  sock_init();
+  for (i = 0; def_nameservers[i]; i++)
+      ;
+  if (i == 0)
+    return ARES_SUCCESS; /* use localhost DNS server */
+
+  nservers = i;
+  servers = calloc(sizeof(*servers), i);
+  if (!servers)
+     return ARES_ENOMEM;
+
+  for (i = 0; def_nameservers[i]; i++)
+      servers[i].addr.s_addr = htonl(def_nameservers[i]);
+  status = ARES_EOF;
+
 #else
   {
     char *p;
     FILE *fp;
     int linesize;
-   
+
     fp = fopen(PATH_RESOLV_CONF, "r");
     if (!fp)
       return (errno == ENOENT) ? ARES_SUCCESS : ARES_EFILE;
     while ((status = ares__read_line(fp, &line, &linesize)) == ARES_SUCCESS)
     {
-      if ((p = try_config(line, "domain")) && channel->ndomains == -1)
+      if ((p = try_config(line, "domain")))
         status = config_domain(channel, p);
       else if ((p = try_config(line, "lookup")) && !channel->lookups)
         status = config_lookup(channel, p);
-      else if ((p = try_config(line, "search")) && channel->ndomains == -1)
+      else if ((p = try_config(line, "search")))
         status = set_search(channel, p);
       else if ((p = try_config(line, "nameserver")) && channel->nservers == -1)
         status = config_nameserver(&servers, &nservers, p);
@@ -453,7 +553,8 @@ DhcpNameServer
       if (status != ARES_SUCCESS)
         break;
     }
-    free(line);
+    if(line)
+      free(line);
     fclose(fp);
   }
 
@@ -462,12 +563,17 @@ DhcpNameServer
   /* Handle errors. */
   if (status != ARES_EOF)
     {
-      if (servers != NULL) free(servers);
-      if (sortlist != NULL) free(sortlist);
+      if (servers != NULL)
+        free(servers);
+      if (sortlist != NULL)
+        free(sortlist);
       return status;
     }
 
   /* If we got any name server entries, fill them in. */
+#ifdef WIN32
+okay:
+#endif
   if (servers)
     {
       channel->servers = servers;
@@ -701,6 +807,14 @@ static int set_search(ares_channel channel, const char *str)
   int n;
   const char *p, *q;
 
+  if(channel->ndomains != -1) {
+    /* if we already have some domains present, free them first */
+    for(n=0; n < channel->ndomains; n++)
+      free(channel->domains[n]);
+    free(channel->domains);
+    channel->ndomains = -1;
+  }
+
   /* Count the domains given. */
   n = 0;
   p = str;

ares/ares_mkquery.3

@@ -21,11 +21,9 @@ ares_mkquery \- Compose a single-question DNS query buffer
 .nf
 .B #include <ares.h>
 .PP
-.B
-int ares_mkquery(const char *\fIname\fP, int \fIdnsclass\fP, int \fItype\fP,
-.B
-	unsigned short \fIid\fP, int \fIrd\fP, char **\fIbuf\fP,
-	int *\fIbuflen\fP)
+.B int ares_mkquery(const char *\fIname\fP, int \fIdnsclass\fP, int \fItype\fP,
+.B	unsigned short \fIid\fP, int \fIrd\fP, char **\fIbuf\fP,
+.B	int *\fIbuflen\fP)
 .fi
 .SH DESCRIPTION
 The
@@ -52,8 +50,7 @@ stored in the variable pointed to by
 and the length of which will be stored in the variable pointed to by
 .IR buflen .
 It is the caller's responsibility to free this buffer using
-.B ares_free_string
-when it is no longer needed.
+\fIares_free_string(3)\fP when it is no longer needed.
 .SH RETURN VALUES
 .B ares_mkquery
 can return any of the following values:

ares/ares_mkquery.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares_parse_a_reply.3

@@ -21,9 +21,8 @@ ares_parse_a_reply \- Parse a reply to a DNS query of type A into a hostent
 .nf
 .B #include <ares.h>
 .PP
-.B
-int ares_parse_a_reply(const unsigned char *\fIabuf\fB, int \fIalen\fB,
-.B 	struct hostent **\fIhost\fB);
+.B int ares_parse_a_reply(const unsigned char *\fIabuf\fP, int \fIalen\fP,
+.B 	struct hostent **\fIhost\fP);
 .fi
 .SH DESCRIPTION
 The

ares/ares_parse_a_reply.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares_parse_ptr_reply.3

@@ -21,11 +21,9 @@ ares_parse_ptr_reply \- Parse a reply to a DNS query of type PTR into a hostent
 .nf
 .B #include <ares.h>
 .PP
-.B
-int ares_parse_ptr_reply(const unsigned char *\fIabuf\fB, int \fIalen\fB,
-.B
- 	const void *\fIaddr\fP, int \fIaddrlen\fP, int \fIfamily\fP,
-.B	struct hostent **\fIhost\fB);
+.B int ares_parse_ptr_reply(const unsigned char *\fIabuf\fP, int \fIalen\fP,
+.B 	const void *\fIaddr\fP, int \fIaddrlen\fP, int \fIfamily\fP,
+.B	struct hostent **\fIhost\fP);
 .fi
 .SH DESCRIPTION
 The

ares/ares_parse_ptr_reply.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares_private.h

@@ -27,6 +27,14 @@
 #define closesocket(x) close(x)
 #endif
 
+#ifdef WATT32
+#include <tcp.h>
+#include <sys/ioctl.h>
+#undef  closesocket
+#define closesocket(s)    close_s(s)
+#define writev(s,v,c)     writev_s(s,v,c)
+#endif
+
 #define	DEFAULT_TIMEOUT		5
 #define DEFAULT_TRIES		4
 #ifndef INADDR_NONE
@@ -42,7 +50,16 @@
 #define DHCPNAMESERVER "DhcpNameServer"
 #define PATH_HOSTS_NT  "\\drivers\\etc\\hosts"
 #define PATH_HOSTS_9X  "\\hosts"
-          
+
+#elif defined(WATT32)
+
+#define PATH_RESOLV_CONF "/dev/ENV/etc/resolv.conf"
+
+#elif defined(NETWARE)
+
+#define PATH_RESOLV_CONF "sys:/etc/resolv.cfg"
+#define PATH_HOSTS		"sys:/etc/hosts"
+
 #else
 
 #define PATH_RESOLV_CONF	"/etc/resolv.conf"
@@ -65,8 +82,8 @@ struct send_request {
 
 struct server_state {
   struct in_addr addr;
-  int udp_socket;
-  int tcp_socket;
+  ares_socket_t udp_socket;
+  ares_socket_t tcp_socket;
 
   /* Mini-buffer for reading the length word */
   unsigned char tcp_lenbuf[2];

ares/ares_process.3

@@ -35,13 +35,10 @@ The file descriptor sets pointed to by
 and
 .I write_fds
 should have file descriptors set in them according to whether the file
-descriptors specified by
-.BR ares_fds (3)
-are ready for reading and writing.  (The easiest way to determine this
-information is to invoke
+descriptors specified by \fIares_fds(3)\fP are ready for reading and writing.
+(The easiest way to determine this information is to invoke
 .B select
-with a timeout no greater than the timeout given by
-.BR ares_timeout (3)).
+with a timeout no greater than the timeout given by \fIares_timeout(3)\fP ).
 .PP
 The
 .B ares_process

ares/ares_process.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32
@@ -35,6 +36,12 @@
 #include "ares_dns.h"
 #include "ares_private.h"
 
+#ifdef WIN32
+#define GET_ERRNO()  WSAGetLastError()
+#else
+#define GET_ERRNO()  errno
+#endif
+
 static void write_tcp_data(ares_channel channel, fd_set *write_fds,
 			   time_t now);
 static void read_tcp_data(ares_channel channel, fd_set *read_fds, time_t now);
@@ -44,12 +51,12 @@ static void process_timeouts(ares_channel channel, time_t now);
 static void process_answer(ares_channel channel, unsigned char *abuf,
 			   int alen, int whichserver, int tcp, int now);
 static void handle_error(ares_channel channel, int whichserver, time_t now);
-static void next_server(ares_channel channel, struct query *query, time_t now);
+static struct query *next_server(ares_channel channel, struct query *query, time_t now);
 static int open_tcp_socket(ares_channel channel, struct server_state *server);
 static int open_udp_socket(ares_channel channel, struct server_state *server);
 static int same_questions(const unsigned char *qbuf, int qlen,
 			  const unsigned char *abuf, int alen);
-static void end_query(ares_channel channel, struct query *query, int status,
+static struct query *end_query(ares_channel channel, struct query *query, int status,
 		      unsigned char *abuf, int alen);
 
 /* Something interesting happened on the wire, or there was a timeout.
@@ -74,13 +81,16 @@ static void write_tcp_data(ares_channel channel, fd_set *write_fds, time_t now)
   struct server_state *server;
   struct send_request *sendreq;
   struct iovec *vec;
-  int i, n, count;
+  int i;
+  ssize_t scount;
+  int wcount;
+  size_t n;
 
   for (i = 0; i < channel->nservers; i++)
     {
       /* Make sure server has data to send and is selected in write_fds. */
       server = &channel->servers[i];
-      if (!server->qhead || server->tcp_socket == -1
+      if (!server->qhead || server->tcp_socket == ARES_SOCKET_BAD
 	  || !FD_ISSET(server->tcp_socket, write_fds))
 	continue;
 
@@ -89,16 +99,10 @@ static void write_tcp_data(ares_channel channel, fd_set *write_fds, time_t now)
       for (sendreq = server->qhead; sendreq; sendreq = sendreq->next)
 	n++;
 
-#ifdef WIN32
-      vec = NULL;
-#else
       /* Allocate iovecs so we can send all our data at once. */
       vec = malloc(n * sizeof(struct iovec));
-#endif
       if (vec)
 	{
-#ifdef WIN32
-#else
 	  /* Fill in the iovecs and send. */
 	  n = 0;
 	  for (sendreq = server->qhead; sendreq; sendreq = sendreq->next)
@@ -107,21 +111,21 @@ static void write_tcp_data(ares_channel channel, fd_set *write_fds, time_t now)
 	      vec[n].iov_len = sendreq->len;
 	      n++;
 	    }
-	  count = writev(server->tcp_socket, vec, n);
+	  wcount = writev(server->tcp_socket, vec, n);
 	  free(vec);
-	  if (count < 0)
+	  if (wcount < 0)
 	    {
 	      handle_error(channel, i, now);
 	      continue;
 	    }
 
 	  /* Advance the send queue by as many bytes as we sent. */
-	  while (count)
+	  while (wcount)
 	    {
 	      sendreq = server->qhead;
-	      if ((size_t)count >= sendreq->len)
+	      if ((size_t)wcount >= sendreq->len)
 		{
-		  count -= sendreq->len;
+		  wcount -= sendreq->len;
 		  server->qhead = sendreq->next;
 		  if (server->qhead == NULL)
 		    server->qtail = NULL;
@@ -129,28 +133,27 @@ static void write_tcp_data(ares_channel channel, fd_set *write_fds, time_t now)
 		}
 	      else
 		{
-		  sendreq->data += count;
-		  sendreq->len -= count;
+		  sendreq->data += wcount;
+		  sendreq->len -= wcount;
 		  break;
 		}
 	    }
-#endif
 	}
       else
 	{
 	  /* Can't allocate iovecs; just send the first request. */
 	  sendreq = server->qhead;
 
-          count = send(server->tcp_socket, sendreq->data, sendreq->len, 0);
+          scount = send(server->tcp_socket, sendreq->data, sendreq->len, 0);
 
-	  if (count < 0)
+	  if (scount < 0)
 	    {
 	      handle_error(channel, i, now);
 	      continue;
 	    }
 
 	  /* Advance the send queue by as many bytes as we sent. */
-	  if ((size_t)count == sendreq->len)
+	  if ((size_t)scount == sendreq->len)
 	    {
 	      server->qhead = sendreq->next;
 	      if (server->qhead == NULL)
@@ -159,8 +162,8 @@ static void write_tcp_data(ares_channel channel, fd_set *write_fds, time_t now)
 	    }
 	  else
 	    {
-	      sendreq->data += count;
-	      sendreq->len -= count;
+	      sendreq->data += scount;
+	      sendreq->len -= scount;
 	    }
 	}
     }
@@ -179,7 +182,8 @@ static void read_tcp_data(ares_channel channel, fd_set *read_fds, time_t now)
     {
       /* Make sure the server has a socket and is selected in read_fds. */
       server = &channel->servers[i];
-      if (server->tcp_socket == -1 || !FD_ISSET(server->tcp_socket, read_fds))
+      if (server->tcp_socket == ARES_SOCKET_BAD ||
+          !FD_ISSET(server->tcp_socket, read_fds))
 	continue;
 
       if (server->tcp_lenbuf_pos != 2)
@@ -251,7 +255,8 @@ static void read_udp_packets(ares_channel channel, fd_set *read_fds,
       /* Make sure the server has a socket and is selected in read_fds. */
       server = &channel->servers[i];
 
-      if (server->udp_socket == -1 || !FD_ISSET(server->udp_socket, read_fds))
+      if (server->udp_socket == ARES_SOCKET_BAD ||
+          !FD_ISSET(server->udp_socket, read_fds))
 	continue;
 
       count = recv(server->udp_socket, buf, sizeof(buf), 0);
@@ -273,7 +278,7 @@ static void process_timeouts(ares_channel channel, time_t now)
       if (query->timeout != 0 && now >= query->timeout)
 	{
 	  query->error_status = ARES_ETIMEOUT;
-	  next_server(channel, query, now);
+	  next = next_server(channel, query, now);
 	}
     }
 }
@@ -349,7 +354,7 @@ static void process_answer(ares_channel channel, unsigned char *abuf,
 
 static void handle_error(ares_channel channel, int whichserver, time_t now)
 {
-  struct query *query;
+  struct query *query, *next;
 
   /* Reset communications with this server. */
   ares__close_sockets(&channel->servers[whichserver]);
@@ -357,17 +362,19 @@ static void handle_error(ares_channel channel, int whichserver, time_t now)
   /* Tell all queries talking to this server to move on and not try
    * this server again.
    */
-  for (query = channel->queries; query; query = query->next)
+
+  for (query = channel->queries; query; query = next)
     {
+      next = query->next;
       if (query->server == whichserver)
 	{
 	  query->skip_server[whichserver] = 1;
-	  next_server(channel, query, now);
+	  next = next_server(channel, query, now);
 	}
     }
 }
 
-static void next_server(ares_channel channel, struct query *query, time_t now)
+static struct query *next_server(ares_channel channel, struct query *query, time_t now)
 {
   /* Advance to the next server or try. */
   query->server++;
@@ -378,7 +385,7 @@ static void next_server(ares_channel channel, struct query *query, time_t now)
 	  if (!query->skip_server[query->server])
 	    {
 	      ares__send_query(channel, query, now);
-	      return;
+	      return (query->next);
 	    }
 	}
       query->server = 0;
@@ -387,7 +394,7 @@ static void next_server(ares_channel channel, struct query *query, time_t now)
       if (query->using_tcp)
 	break;
     }
-  end_query(channel, query, query->error_status, NULL, 0);
+  return end_query(channel, query, query->error_status, NULL, 0);
 }
 
 void ares__send_query(ares_channel channel, struct query *query, time_t now)
@@ -401,7 +408,7 @@ void ares__send_query(ares_channel channel, struct query *query, time_t now)
       /* Make sure the TCP socket for this server is set up and queue
        * a send request.
        */
-      if (server->tcp_socket == -1)
+      if (server->tcp_socket == ARES_SOCKET_BAD)
 	{
 	  if (open_tcp_socket(channel, server) == -1)
 	    {
@@ -410,9 +417,12 @@ void ares__send_query(ares_channel channel, struct query *query, time_t now)
 	      return;
 	    }
 	}
-      sendreq = malloc(sizeof(struct send_request));
+      sendreq = calloc(sizeof(struct send_request), 1);
       if (!sendreq)
+        {
 	end_query(channel, query, ARES_ENOMEM, NULL, 0);
+          return;
+        }
       sendreq->data = query->tcpbuf;
       sendreq->len = query->tcplen;
       sendreq->next = NULL;
@@ -425,7 +435,7 @@ void ares__send_query(ares_channel channel, struct query *query, time_t now)
     }
   else
     {
-      if (server->udp_socket == -1)
+      if (server->udp_socket == ARES_SOCKET_BAD)
 	{
 	  if (open_udp_socket(channel, server) == -1)
 	    {
@@ -448,17 +458,18 @@ void ares__send_query(ares_channel channel, struct query *query, time_t now)
 
 static int open_tcp_socket(ares_channel channel, struct server_state *server)
 {
-  int s, flags;
+  ares_socket_t s;
+  int flags;
   struct sockaddr_in sockin;
 
   /* Acquire a socket. */
   s = socket(AF_INET, SOCK_STREAM, 0);
-  if (s == -1)
+  if (s == ARES_SOCKET_BAD)
     return -1;
 
   /* Set the socket non-blocking. */
 
-#ifdef WIN32
+#if defined(WIN32) || defined(WATT32)
   flags = 1;
   ioctlsocket(s, FIONBIO, &flags);
 #else
@@ -466,41 +477,44 @@ static int open_tcp_socket(ares_channel channel, struct server_state *server)
 
   if (flags == -1)
     {
-      close(s);
+      closesocket(s);
       return -1;
     }
   flags |= O_NONBLOCK;
   if (fcntl(s, F_SETFL, flags) == -1)
     {
-      close(s);
+      closesocket(s);
       return -1;
     }
 #endif
-  
+
   /* Connect to the server. */
   memset(&sockin, 0, sizeof(sockin));
   sockin.sin_family = AF_INET;
   sockin.sin_addr = server->addr;
   sockin.sin_port = channel->tcp_port;
-  if (connect(s, (struct sockaddr *) &sockin, sizeof(sockin)) == -1
-      && errno != EINPROGRESS)
-    {
+  if (connect(s, (struct sockaddr *) &sockin, sizeof(sockin)) == -1) {
+    int err = GET_ERRNO();
+
+    if (err != EINPROGRESS && err != EWOULDBLOCK) {
       closesocket(s);
       return -1;
     }
+  }
 
+  server->tcp_buffer_pos = 0;
   server->tcp_socket = s;
   return 0;
 }
 
 static int open_udp_socket(ares_channel channel, struct server_state *server)
 {
-  int s;
+  ares_socket_t s;
   struct sockaddr_in sockin;
 
   /* Acquire a socket. */
   s = socket(AF_INET, SOCK_DGRAM, 0);
-  if (s == -1)
+  if (s == ARES_SOCKET_BAD)
     return -1;
 
   /* Connect to the server. */
@@ -597,10 +611,10 @@ static int same_questions(const unsigned char *qbuf, int qlen,
   return 1;
 }
 
-static void end_query(ares_channel channel, struct query *query, int status,
+static struct query *end_query (ares_channel channel, struct query *query, int status,
 		      unsigned char *abuf, int alen)
 {
-  struct query **q;
+  struct query **q, *next;
   int i;
 
   query->callback(query->arg, status, abuf, alen);
@@ -610,6 +624,10 @@ static void end_query(ares_channel channel, struct query *query, int status,
 	break;
     }
   *q = query->next;
+  if (*q)
+    next = (*q)->next;
+  else
+    next = NULL;
   free(query->tcpbuf);
   free(query->skip_server);
   free(query);
@@ -622,4 +640,5 @@ static void end_query(ares_channel channel, struct query *query, int status,
       for (i = 0; i < channel->nservers; i++)
 	ares__close_sockets(&channel->servers[i]);
     }
+  return (next);
 }

ares/ares_query.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares_search.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -124,7 +125,12 @@ void ares_search(ares_channel channel, const char *name, int dnsclass,
 	  free(s);
 	}
       else
+      {
+        /* failed, free the malloc()ed memory */
+        free(squery->name);
+        free(squery);
 	callback(arg, status, NULL, 0);
+      }
     }
 }
 

ares/ares_send.3

@@ -24,8 +24,7 @@ ares_send \- Initiate a DNS query
 .B typedef void (*ares_callback)(void *\fIarg\fP, int \fIstatus\fP,
 .B	unsigned char *\fIabuf\fP, int \fIalen\fP)
 .PP
-.B
-void ares_send(ares_channel \fIchannel\fP, const unsigned char *\fIqbuf\fP,
+.B void ares_send(ares_channel \fIchannel\fP, const unsigned char *\fIqbuf\fP,
 .B 	int \fIqlen\fP, ares_callback \fIcallback\fP, void *\fIarg\fP)
 .fi
 .SH DESCRIPTION

ares/ares_send.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares_strerror.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <assert.h>
 #include "ares.h"
 
@@ -35,7 +36,9 @@ const char *ares_strerror(int code)
     "Timeout while contacting DNS servers",
     "End of file",
     "Error reading file",
-    "Out of memory"
+    "Out of memory",
+    "Channel is being destroyed",
+    "Misformatted string"
   };
 
   assert(code >= 0 && code < (int)(sizeof(errtext) / sizeof(*errtext)));

ares/ares_timeout.3

@@ -27,10 +27,8 @@ ares_fds \- Get file descriptors to select on for name service
 .SH DESCRIPTION
 The
 .B ares_timeout
-function determines the maximum time for which the caller should wait
-before invoking 
-.BR ares_process (3)
-to process timeouts.  The parameter
+function determines the maximum time for which the caller should wait before
+invoking \fIares_process(3)\fP to process timeouts.  The parameter
 .I maxtv
 specifies a existing maximum timeout, or
 .B NULL

ares/ares_timeout.c

@@ -13,6 +13,7 @@
  * without express or implied warranty.
  */
 
+#include "setup.h"
 #include <sys/types.h>
 
 #ifdef WIN32

ares/ares_version.c

@@ -1,5 +1,6 @@
 /* $Id$ */
 
+#include "setup.h"
 #include "ares_version.h"
 
 const char *ares_version(int *version)

ares/ares_version.h

@@ -4,12 +4,12 @@
 #define ARES__VERSION_H
 
 #define ARES_VERSION_MAJOR 1
-#define ARES_VERSION_MINOR 0
+#define ARES_VERSION_MINOR 2
 #define ARES_VERSION_PATCH 0
 #define ARES_VERSION ((ARES_VERSION_MAJOR<<16)|\
                        (ARES_VERSION_MINOR<<8)|\
                        (ARES_VERSION_PATCH))
-#define ARES_VERSION_STR "1.0.0"
+#define ARES_VERSION_STR "1.2.0"
 
 const char *ares_version(int *version);
 

ares/buildconf

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+libtoolize --copy --automake --force
+aclocal
+autoheader
+autoconf
+automake --add-missing

ares/configure.ac

@@ -1,17 +1,22 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_INIT(ares_init.c)
+AM_CONFIG_HEADER(config.h)
+AM_MAINTAINER_MODE
+AM_INIT_AUTOMAKE(c-ares, CVS)
 
 AC_PROG_CC
 AC_PROG_INSTALL
-AC_PROG_RANLIB
 
-AC_CANONICAL_HOST
 case $host_os in
 solaris*)
-	AC_DEFINE(ETC_INET)
+	AC_DEFINE(ETC_INET, 1, [if a /etc/inet dir is being used])
 	;;
 esac
 
+# check for ssize_t
+AC_CHECK_TYPE(ssize_t, ,
+   AC_DEFINE(ssize_t, int, [the signed version of size_t]))
+
 AC_SEARCH_LIBS(gethostbyname, nsl)
 AC_SEARCH_LIBS(socket, socket)
 
@@ -30,6 +35,9 @@ AC_HELP_STRING([--disable-debug],[Disable debug options]),
        ;;
   *)   AC_MSG_RESULT(yes)
 
+    dnl when doing the debug stuff, use static library only
+    AC_DISABLE_SHARED
+
     dnl Checks for standard header files, to make memdebug.h inclusions bettter
     AC_HEADER_STDC
 
@@ -45,12 +53,14 @@ AC_HELP_STRING([--disable-debug],[Disable debug options]),
        AC_MSG_RESULT(no)
 )
 
+AC_PROG_LIBTOOL
+
 dnl check for a few basic system headers we need
-dnl AC_CHECK_HEADERS(
-dnl        sys/types.h \
-dnl        sys/time.h \
-dnl        sys/select.h \
-dnl        sys/socket.h \
-dnl        )
+AC_CHECK_HEADERS(
+       sys/types.h \
+       sys/time.h \
+       sys/select.h \
+       sys/socket.h \
+       )
 
 AC_OUTPUT(Makefile)

ares/maketgz

@@ -2,8 +2,6 @@
 
 $version = $ARGV[0];
 
-$name="c-ares";
-
 if($version eq "") {
     print "Enter version number!\n";
     exit;
@@ -15,84 +13,25 @@ if(!-f "ares.h") {
 }
 
 if(!-f "configure") {
-    `autoconf`;
+    print "running buildconf\n";
+    `./buildconf`;
 }
+print "adding $version in the configure.ac file\n";
+`sed -e 's/AM_INIT_AUTOMAKE(c-ares, CVS)/AM_INIT_AUTOMAKE(c-ares, $version)/' < configure.ac > configure.ac-rel`;
 
-@files=`find . -name FILES`;
+# now make a new configure script with this
+print "makes a new configure script\n";
+`autoconf configure.ac-rel >configure`;
 
-my @entries;
+# now run this new configure to get a fine makefile
+print "running configure\n";
+`./configure`;
 
-sub dirpart {
-    my ($file)=@_;
-    my @p=split("/", $file);
-    $p[$#p]=""; # blank the last one
-    my $dir=join("/", @p);
+# now make the actual tarball
+print "running make dist\n";
+`make dist`;
 
-    $dir =~ s/^\.\///; # cut off ./ beginnings
+print "removing temporary configure.ac file\n";
+`rm configure.ac-rel`;
 
-    $dir =~ s/\/$//;  # off / trailers
-
-    if(!$dir) {
-        $dir = ".";
-    }
-
-    return $dir;
-}
-
-sub add {
-    my ($file)=@_;
-
-    my $dir=dirpart($file);
-
-    open(FILE, "<$file");
-    while(<FILE>) {
-        if($_ =~ /^ *\#/) {
-            next;
-        }
-        chomp;
-        push @entries, "$dir/$_";
-    }
-    close(FILE);
-}
-
-for(@files) {
-    chomp;
-    add($_);
-}
-
-sub mkalldir {
-    my ($dir) = @_;
-
-    my @parts = split("/", $dir);
-
-    #print "IN: $dir\n";
-
-    my $sub="";
-    for(@parts) {
-        #print "PART: $_\n";
-
-        $sub .= "$_";
-        if($_ eq "") {
-            next;
-        }
-        mkdir($sub, 0777);
-        #print "make $sub\n";
-        $sub .= "/";
-    }
-    
-}
-
-for(@entries) {
-    my $dir = dirpart("$name-$version/$_");
- #   print "Create $dir\n";
-    mkalldir($dir);
- #   print "Copy $_ to $dir\n";
-    `cp -p $_ $dir`;
-}
-
-# make a tarball
-`tar -cf $name-$version.tar $name-$version`;
-# gzip the tarball
-`gzip -9 $name-$version.tar`;
-# remove the dir
-`rm -rf $name-$version`;
+print "NOTE: now cvs tag this release!\n";

ares/nameser.h

@@ -4,13 +4,18 @@
 /* Windows-only header file provided by liren@vivisimo.com to make his Windows
    port build */
 
+#ifndef NETWARE
 #include <windows.h>
 #include <process.h> /* for the _getpid() proto */
+#endif  /* !NETWARE */
 #include <sys/types.h>
 
+#ifndef NETWARE
+
 #define MAXHOSTNAMELEN 256
 
 #define EINPROGRESS WSAEINPROGRESS
+#define EWOULDBLOCK WSAEWOULDBLOCK
 
 /* Structure for scatter/gather I/O.  */
 struct iovec
@@ -21,11 +26,16 @@ struct iovec
 
 #define getpid() _getpid()
 
+int ares_writev (SOCKET s, const struct iovec *vector, size_t count);
+#define writev(s,vect,count)  ares_writev(s,vect,count)
+
 struct timezone { int dummy; };
 
 int ares_gettimeofday(struct timeval *tv, struct timezone *tz);
 #define gettimeofday(tv,tz) ares_gettimeofday(tv,tz)
 
+#endif  /* !NETWARE */
+
 #define NS_CMPRSFLGS  0xc0  
 
 
@@ -211,7 +221,7 @@ typedef enum __ns_rcode {
 #define T_MAILA         ns_t_maila
 #define T_ANY           ns_t_any
 
-#ifndef __MINGW32__
+#if !(defined(__MINGW32__) || defined(NETWARE))
 /* protos for the functions we provide in windows_port.c */
 int ares_strncasecmp(const char *s1, const char *s2, size_t n);
 int ares_strcasecmp(const char *s1, const char *s2);

ares/setup.h

@@ -0,0 +1,45 @@
+#ifndef ARES_SETUP_H
+#define ARES_SETUP_H
+
+/* Copyright (C) 2004 by Daniel Stenberg et al
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation for any purpose and without fee is hereby granted, provided
+ * that the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  M.I.T. makes no representations about the
+ * suitability of this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#else
+/* simple work-around for now, for systems without configure support */
+#define ssize_t int
+#endif
+
+/* Recent autoconf versions define these symbols in config.h. We don't want
+   them (since they collide with the libcurl ones when we build
+   --enable-debug) so we undef them again here. */
+#undef PACKAGE_STRING
+#undef PACKAGE_TARNAME
+#undef PACKAGE_VERSION
+#undef PACKAGE_BUGREPORT
+#undef PACKAGE_NAME
+#undef VERSION
+#undef PACKAGE
+
+/* now typedef our socket type */
+#ifdef WIN32
+#include <winsock.h>
+typedef SOCKET ares_socket_t;
+#define ARES_SOCKET_BAD INVALID_SOCKET
+#else
+typedef int ares_socket_t;
+#define ARES_SOCKET_BAD -1
+#endif
+
+#endif /* ARES_SETUP_H */

ares/windows_port.c

@@ -1,7 +1,12 @@
+#include "setup.h"
+
+#ifdef WIN32 /* only do the following on windows */
 #include <stdio.h>
 #include <stdlib.h>
 #include <ctype.h>
 #include <string.h>
+#include <errno.h>
+#include <malloc.h>
 
 #include "nameser.h"
 
@@ -26,8 +31,8 @@ ares_strcasecmp(const char *a, const char *b)
 }
 #endif
 
-int 
-ares_gettimeofday(struct timeval *tv, struct timezone *tz) 
+int
+ares_gettimeofday(struct timeval *tv, struct timezone *tz)
 {
     FILETIME        ft;
     LARGE_INTEGER   li;
@@ -40,24 +45,47 @@ ares_gettimeofday(struct timeval *tv, struct timezone *tz)
         li.LowPart  = ft.dwLowDateTime;
         li.HighPart = ft.dwHighDateTime;
         t  = li.QuadPart;       /* In 100-nanosecond intervals */
-        //t -= EPOCHFILETIME;     /* Offset to the Epoch time */
+#if 0
+        t -= EPOCHFILETIME;     /* Offset to the Epoch time */
+#endif
         t /= 10;                /* In microseconds */
         tv->tv_sec  = (long)(t / 1000000);
         tv->tv_usec = (long)(t % 1000000);
     }
 
-#if 0
-    if (tz)
-    {
-        if (!tzflag)
-        {
-            _tzset();
-            tzflag++;
-        }
-        tz->tz_minuteswest = _timezone / 60;
-        tz->tz_dsttime = _daylight;
-    }
-#endif
-
     return 0;
 }
+
+int
+ares_writev (SOCKET s, const struct iovec *vector, size_t count)
+{
+  char *buffer, *bp;
+  size_t i, bytes = 0;
+
+  /* Find the total number of bytes to write
+   */
+  for (i = 0; i < count; i++)
+      bytes += vector[i].iov_len;
+
+  if (bytes == 0)   /* not an error */
+     return (0);
+
+  /* Allocate a temporary buffer to hold the data
+   */
+  buffer = bp = (char*) alloca (bytes);
+  if (!buffer)
+  {
+    errno = ENOMEM;
+    return (-1);
+  }
+
+  /* Copy the data into buffer.
+   */
+  for (i = 0; i < count; ++i)
+  {
+    memcpy (bp, vector[i].iov_base, vector[i].iov_len);
+    bp += vector[i].iov_len;
+  }
+  return send (s, (const void*)buffer, bytes, 0);
+}
+#endif /* WIN32 builds only */

buildconf

@@ -67,7 +67,7 @@ echo "buildconf: autoheader version $ah_version (ok)"
 # automake 1.7 or newer
 #
 need_automake="1.7"
-am_version=`${AUTOMAKE:-automake} --version 2>/dev/null|head -1| sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//'`
+am_version=`${AUTOMAKE:-automake} --version 2>/dev/null|head -1| sed -e 's/^.* \([0-9]\)/\1/' -e 's/[a-z]* *$//' -e 's/\(.*\)\(-p.*\)/\1/'`
 if test -z "$am_version"; then
   echo "buildconf: automake not found."
   echo "            You need automake version $need_automake or newer installed."
@@ -157,27 +157,27 @@ fi
 # run the correct scripts now
 
 echo "buildconf: running libtoolize"
-${LIBTOOLIZE:-libtoolize} --copy --automake --force || die "The command '${LIBTOOLIZE:-libtoolize}  --copy --automake --force' failed"
+${LIBTOOLIZE:-libtoolize} --copy --automake --force || die "The libtool command failed"
 echo "buildconf: running aclocal"
-${ACLOCAL:-aclocal}       || die "The command '${AUTOHEADER:-aclocal}' failed"
+${ACLOCAL:-aclocal} $ACLOCAL_FLAGS || die "The aclocal command line failed"
 echo "buildconf: running aclocal hack to convert all mv to mv -f"
 perl -i.bak -pe 's/\bmv +([^-\s])/mv -f $1/g' aclocal.m4
 echo "buildconf: running autoheader"
-${AUTOHEADER:-autoheader} || die "The command '${AUTOHEADER:-autoheader}' failed"
+${AUTOHEADER:-autoheader} || die "The autoheader command failed"
 echo "buildconf: running autoconf"
-${AUTOCONF:-autoconf}     || die "The command '${AUTOCONF:-autoconf}' failed"
+${AUTOCONF:-autoconf}     || die "The autoconf command failed"
 
 if test -d ares; then
   cd ares
   echo "buildconf: running aclocal in the ares directory"
-  ${ACLOCAL:-aclocal}     || die "The command '${ACLOCAL:-aclocal}' failed"
+  ${ACLOCAL:-aclocal} $ACLOCAL_FLAGS || die "The ares aclocal command failed"
   echo "buildconf: running autoconf in the ares directory"
-  ${AUTOCONF:-autoconf}     || die "The command '${AUTOCONF:-autoconf}' failed"
+  ${AUTOCONF:-autoconf}     || die "The ares autoconf command failed"
   cd ..
 fi
 
 echo "buildconf: running automake"
-${AUTOMAKE:-automake} -a  || die "The command '${AUTOMAKE:-automake} -a' failed"
+${AUTOMAKE:-automake} -a  || die "The automake command failed"
 
 echo "buildconf: OK"
 exit 0

configure.ac

@@ -4,7 +4,7 @@ dnl Process this file with autoconf to produce a configure script.
 AC_PREREQ(2.57)
 
 dnl We don't know the version number "staticly" so we use a dash here
-AC_INIT(curl, [-], [curl-bug@haxx.se])
+AC_INIT(curl, [-], [a suitable curl mailing list => http://curl.haxx.se/mail/])
 
 dnl configure script copyright
 AC_COPYRIGHT([Copyright (c) 1998 - 2004 Daniel Stenberg, <daniel@haxx.se>
@@ -16,22 +16,34 @@ AM_CONFIG_HEADER(lib/config.h src/config.h)
 AM_MAINTAINER_MODE
 
 dnl SED is needed by some of the tools
-AC_PATH_PROG( SED, sed, , $PATH:/usr/bin:/usr/local/bin)
+AC_PATH_PROG( SED, sed, sed-was-not-found-by-configure,
+              $PATH:/usr/bin:/usr/local/bin)
 AC_SUBST(SED)
 
+if test "x$SED" = "xsed-was-not-found-by-configure"; then
+  AC_MSG_WARN([sed was not found, this may ruin your chances to build fine])
+fi
+
 dnl AR is used by libtool, and try the odd Solaris path too
-AC_PATH_PROG( AR, ar, , $PATH:/usr/bin:/usr/local/bin:/usr/ccs/bin)
+dnl we use AC_CHECK_TOOL since this should make a library for the target
+dnl platform
+AC_CHECK_TOOL(AR, ar,
+              ar-was-not-found-by-configure,
+              $PATH:/usr/bin:/usr/local/bin:/usr/ccs/bin)
 AC_SUBST(AR)
+if test "x$AR" = "xar-was-not-found-by-configure"; then
+  AC_MSG_WARN([ar was not found, this may ruin your chances to build fine])
+fi
 
 dnl figure out the libcurl version
-VERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curl.h`
+VERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curlver.h`
 AM_INIT_AUTOMAKE(curl,$VERSION)
 AC_MSG_CHECKING([curl version])
 AC_MSG_RESULT($VERSION)
 
 dnl
 dnl we extract the numerical version for curl-config only
-VERSIONNUM=`$SED -ne 's/^#define LIBCURL_VERSION_NUM 0x\(.*\)/\1/p' ${srcdir}/include/curl/curl.h`
+VERSIONNUM=`$SED -ne 's/^#define LIBCURL_VERSION_NUM 0x\(.*\)/\1/p' ${srcdir}/include/curl/curlver.h`
 AC_SUBST(VERSIONNUM)
 
 dnl Solaris pkgadd support definitions
@@ -42,6 +54,17 @@ AC_SUBST(PKGADD_PKG)
 AC_SUBST(PKGADD_NAME)
 AC_SUBST(PKGADD_VENDOR)
 
+dnl
+dnl initialize all the info variables to 'no'
+    curl_ssl_msg="no     (--with-ssl)"
+   curl_zlib_msg="no     (--with-zlib)"
+   curl_krb4_msg="no     (--with-krb4*)"
+    curl_gss_msg="no     (--with-gssapi)"
+ curl_spnego_msg="no     (--with-spnego)"
+   curl_ares_msg="no     (--enable-ares)"
+   curl_ipv6_msg="no     (--enable-ipv6)"
+    curl_idn_msg="no     (--with-libidn)"
+ curl_manual_msg="no     (--enable-manual)"
 
 dnl
 dnl Detect the canonical host and target build environment
@@ -64,7 +87,7 @@ dnl check for cygwin stuff
 AC_LIBTOOL_WIN32_DLL
 
 dnl libtool setup
-AM_PROG_LIBTOOL
+AC_PROG_LIBTOOL
 
 AC_MSG_CHECKING([if we need -no-undefined])
 case $host in
@@ -258,7 +281,7 @@ dnl At least one system has been identified to require BOTH nsl and socket
 dnl libs at the same time to link properly.
 if test "$HAVE_GETHOSTBYNAME" != "1"
 then
-  AC_MSG_CHECKING([trying gethostbyname with both nsl and socket libs])
+  AC_MSG_CHECKING([for gethostbyname with both nsl and socket libs])
   my_ac_save_LIBS=$LIBS
   LIBS="-lnsl -lsocket $LIBS"
   AC_TRY_LINK( ,
@@ -383,7 +406,11 @@ main()
 ))
 
 if test "$ipv6" = "yes"; then
+  curl_ipv6_msg="enabled"
+
   CURL_CHECK_WORKING_GETADDRINFO
+
+  CURL_CHECK_NI_WITHSCOPEID
 fi
 
 dnl **********************************************************************
@@ -533,7 +560,7 @@ then
       AC_CHECK_HEADERS(krb.h)
 
       dnl we found the required libraries, add to LIBS
-      LIBS="-lkrb -ldes $LIBS"
+      LIBS="-lkrb -lcom_err -ldes $LIBS"
 
       dnl Check for function krb_get_our_ip_for_realm
       dnl this is needed for NAT networks
@@ -547,6 +574,8 @@ then
       KRB4_ENABLED=1
       AC_SUBST(KRB4_ENABLED)
 
+      curl_krb4_msg="enabled"
+
       dnl the krb4 stuff needs a strlcpy()
       AC_CHECK_FUNCS(strlcpy)
 
@@ -580,7 +609,9 @@ if test x"$want_spnego" = xyes; then
      fi
  
      AC_MSG_RESULT(yes)
-     AC_DEFINE(HAVE_SPNEGO, 1, [Define this if you have the SPNEGO library fbopenssl])
+     AC_DEFINE(HAVE_SPNEGO, 1,
+               [Define this if you have the SPNEGO library fbopenssl])
+     curl_spnego_msg="enabled"
   fi
 else
   AC_MSG_RESULT(no)
@@ -636,6 +667,8 @@ if test x"$want_gss" = xyes; then
   AC_MSG_RESULT(yes)
   AC_DEFINE(HAVE_GSSAPI, 1, [if you have the gssapi libraries])
 
+  curl_gss_msg="enabled"
+
   if test -n "$GSSAPI_INCS"; then
     # cut off the preceding -I from the include path
     GSSAPI_INCS=`echo $GSSAPI_INCS | sed -e s/^-I//g`
@@ -651,33 +684,6 @@ else
   AC_MSG_RESULT(no)
 fi
   
-
-dnl Detect the pkg-config tool, as it may have extra info about the
-dnl openssl installation we can use. I *believe* this is what we are
-dnl expected to do on really recent Redhat Linux hosts.
-AC_PATH_PROG( PKGCONFIG, pkg-config, no, $PATH:/usr/bin:/usr/local/bin)
-if test "$PKGCONFIG" != "no" ; then
-  AC_MSG_CHECKING([for OpenSSL options using pkg-config])
-
-  $PKGCONFIG --exists openssl
-  SSL_EXISTS=$?
-
-  if test "$SSL_EXISTS" -eq "0"; then
-    SSL_LIBS=`$PKGCONFIG --libs-only-l openssl 2>/dev/null`
-    SSL_LDFLAGS=`$PKGCONFIG --libs-only-L openssl 2>/dev/null`
-    SSL_CPPFLAGS=`$PKGCONFIG --cflags-only-I openssl 2>/dev/null`
-
-    LIBS="$LIBS $SSL_LIBS"
-    CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
-    LDFLAGS="$LDFLAGS $SSL_LDFLAGS"
-
-    AC_MSG_RESULT([yes])
-  else
-    AC_MSG_RESULT([no])
-  fi
-
-fi
-
 dnl **********************************************************************
 dnl Check for the presence of SSL libraries and headers
 dnl **********************************************************************
@@ -693,14 +699,39 @@ AC_HELP_STRING([--without-ssl], [disable SSL]),
 
 if test X"$OPT_SSL" = Xno
 then
-  AC_MSG_WARN(SSL/https support disabled)  
+  AC_MSG_WARN([SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more])  
 else
 
-  dnl Check for and handle argument to --with-ssl.
-
-  dnl save the pre-ssl check flags for a while
+  dnl backup the pre-ssl variables
   CLEANLDFLAGS="$LDFLAGS"
   CLEANCPPFLAGS="$CPPFLAGS"
+  CLEANLIBS="$LIBS"
+
+  dnl Detect the pkg-config tool, as it may have extra info about the openssl
+  dnl installation we can use. I *believe* this is what we are expected to do
+  dnl on really recent Redhat Linux hosts.
+
+  AC_PATH_PROG( PKGCONFIG, pkg-config, no, $PATH:/usr/bin:/usr/local/bin)
+  if test "$PKGCONFIG" != "no" ; then
+    AC_MSG_CHECKING([OpenSSL options with pkg-config])
+
+    $PKGCONFIG --exists openssl
+    SSL_EXISTS=$?
+
+    if test "$SSL_EXISTS" -eq "0"; then
+      SSL_LIBS=`$PKGCONFIG --libs-only-l openssl 2>/dev/null`
+      SSL_LDFLAGS=`$PKGCONFIG --libs-only-L openssl 2>/dev/null`
+      SSL_CPPFLAGS=`$PKGCONFIG --cflags-only-I openssl 2>/dev/null`
+
+      dnl use the values pkg-config reported
+      LIBS="$LIBS $SSL_LIBS"
+      CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
+      LDFLAGS="$LDFLAGS $SSL_LDFLAGS"
+      AC_MSG_RESULT([found])
+    else
+      AC_MSG_RESULT([no])
+    fi
+  fi
 
   case "$OPT_SSL" in
   yes)
@@ -718,14 +749,13 @@ else
   AC_CHECK_LIB(crypto, CRYPTO_lock,[
      HAVECRYPTO="yes"
      ],[
-     OLDLDFLAGS="$LDFLAGS"
-     OLDCPPFLAGS="$CPPFLAGS"
      LDFLAGS="$CLEANLDFLAGS -L$EXTRA_SSL/lib$libsuff"
      CPPFLAGS="$CLEANCPPFLAGS -I$EXTRA_SSL/include/openssl -I$EXTRA_SSL/include"
      AC_CHECK_LIB(crypto, CRYPTO_add_lock,[
        HAVECRYPTO="yes" ], [
-       LDFLAGS="$OLDLDFLAGS"
-       CPPFLAGS="$OLDCPPFLAGS"
+       LDFLAGS="$CLEANLDFLAGS"
+       CPPFLAGS="$CLEANCPPFLAGS"
+       LIBS="$CLEANLIBS"
        ])
     ])
 
@@ -770,10 +800,12 @@ else
     dnl Check for SSLeay headers
     AC_CHECK_HEADERS(openssl/x509.h openssl/rsa.h openssl/crypto.h \
                      openssl/pem.h openssl/ssl.h openssl/err.h,
+      curl_ssl_msg="enabled"
       OPENSSL_ENABLED=1)
 
     if test $ac_cv_header_openssl_x509_h = no; then
       AC_CHECK_HEADERS(x509.h rsa.h crypto.h pem.h ssl.h err.h,
+        curl_ssl_msg="enabled"
         OPENSSL_ENABLED=1)
     fi
 
@@ -894,6 +926,7 @@ case "$OPT_ZLIB" in
       dnl replace 'HAVE_LIBZ' in the automake makefile.ams
       AMFIXLIB="1"
       AC_MSG_NOTICE([found both libz and libz.h header])
+      curl_zlib_msg="enabled"
     fi
     ;;
 esac
@@ -901,6 +934,43 @@ esac
 dnl set variable for use in automakefile(s)
 AM_CONDITIONAL(HAVE_LIBZ, test x"$AMFIXLIB" = x1)
 
+AC_MSG_CHECKING([whether to build with libidn])
+AC_ARG_WITH(libidn,
+AC_HELP_STRING([--with-libidn=PATH],[Enable libidn usage])
+AC_HELP_STRING([--without-libidn],[Disable libidn usage]),
+  [LIBIDN="$withval"])
+
+case "$LIBIDN" in
+  no)
+       AC_MSG_RESULT(no)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       AC_CHECK_LIB(idn, idna_to_ascii_lz, ,
+                    [
+                    dnl if there was a given path, try it
+                    nolibidn="true"
+                    if test "x$LIBIDN" != "xyes"; then
+                      nolibidn="" dnl reset to test again
+                      oldLDFLAGS=$LDFLAGS
+                      oldCPPFLAGS=$CPPFLAGS
+                      LDFLAGS="$LDFLAGS -L$LIBIDN/lib"
+                      CPPFLAGS="$CPPFLAGS -I$LIBIDN/include"
+                      AC_CHECK_LIB(idn, idna_to_ascii_4i, ,
+                                   nolibidn="true"
+                                   LDFLAGS=$oldLDFLAGS
+                                   CPPFLAGS=$oldCPPFLAGS)
+                    fi
+                    ])
+       if test "x$nolibidn" != "xtrue"; then
+         curl_idn_msg="enabled"
+         dnl different versions of libidn have different setups of these:
+         AC_CHECK_FUNCS( idn_free )
+         AC_CHECK_HEADERS( idn-free.h )
+       fi
+                    
+       ;; 
+esac
+
 dnl Default is to try the thread-safe versions of a few functions
 OPT_THREAD=on
 
@@ -915,6 +985,7 @@ printf("just fine");
 #endif
 ],
  [ AC_MSG_RESULT([yes])
+   RECENTAIX=yes
    OPT_THREAD=off ],
  [ AC_MSG_RESULT([no]) ]
 )
@@ -943,7 +1014,7 @@ else
     CURL_CHECK_GETHOSTBYNAME_R()
 
     dnl dig around for gethostbyaddr_r()
-    CURL_CHECK_GETHOSTBYADDR_R()
+    dnl CURL_CHECK_GETHOSTBYADDR_R()
   fi
 
   dnl poke around for inet_ntoa_r()
@@ -952,10 +1023,31 @@ else
   dnl is there a localtime_r()
   CURL_CHECK_LOCALTIME_R()
 
-  AC_CHECK_FUNCS( gmtime_r )
+  dnl is there a strerror_r()
+  CURL_CHECK_STRERROR_R()
 
+  AC_CHECK_FUNCS( gmtime_r )
 fi
 
+dnl for recent AIX versions, we skip all the thread-safe checks above since
+dnl they claim a thread-safe libc using the standard API. But there are
+dnl some functions still not thread-safe. Check for these!
+
+dnl Let's hope this split URL remains working:
+dnl http://publibn.boulder.ibm.com/doc_link/en_US/a_doc_lib/aixprggd/ \
+dnl genprogc/thread_quick_ref.htm
+
+if test "x$RECENTAIX" = "xyes"; then
+  dnl is there a localtime_r()
+  CURL_CHECK_LOCALTIME_R()
+
+  dnl is there a strerror_r()
+  CURL_CHECK_STRERROR_R()
+
+  AC_CHECK_FUNCS( gmtime_r )
+fi
+
+
 dnl **********************************************************************
 dnl Back to "normal" configuring
 dnl **********************************************************************
@@ -979,6 +1071,7 @@ AC_CHECK_HEADERS(
         arpa/inet.h \
         net/if.h \
         netinet/in.h \
+        netinet/tcp.h \
         netdb.h \
         sys/sockio.h \
         sys/stat.h \
@@ -1015,6 +1108,9 @@ dnl default includes
 #ifdef HAVE_SYS_SOCKET_H
 #include <sys/socket.h>
 #endif
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
 ]
 )
 
@@ -1027,6 +1123,7 @@ AC_CHECK_SIZEOF(curl_off_t, ,[
 #include <stdio.h>
 #include "$srcdir/include/curl/curl.h"
 ])
+AC_CHECK_SIZEOF(size_t)
 
 AC_CHECK_TYPE(long long,
    [AC_DEFINE(HAVE_LONGLONG, 1, [if your compiler supports 'long long'])])
@@ -1104,6 +1201,31 @@ if test "$ac_cv_func_sigsetjmp" != "yes"; then
                )
 fi
 
+dnl poll() might be badly emulated, as in Mac OS X 10.3 (and other BSDs?) and
+dnl to find out we make an extra check here!
+if test "$ac_cv_func_poll" = "yes"; then
+  AC_MSG_CHECKING([if poll works with NULL inputs])
+  AC_RUN_IFELSE([
+#ifdef HAVE_SYS_POLL_H
+#include <sys/poll.h>
+#endif
+
+  int main(void)
+  {
+    /* make this return 0 == timeout since there's nothing to read from */
+    return poll((void *)0, 0, 10 /*ms*/);
+  }
+],
+  AC_MSG_RESULT(yes)
+  AC_DEFINE(HAVE_POLL_FINE, 1, [If you have a fine poll]),
+  AC_MSG_RESULT(no),
+  AC_MSG_RESULT(cross-compiling assumes yes)
+  AC_DEFINE(HAVE_POLL_FINE, 1, [If you have a fine poll])
+  ) dnl end of AC_RUN_IFELSE
+fi
+
+
+
 AC_PATH_PROG( PERL, perl, , 
   $PATH:/usr/local/bin/perl:/usr/bin/:/usr/local/bin )
 AC_SUBST(PERL)
@@ -1164,15 +1286,84 @@ dnl manual
 
 if test "$USE_MANUAL" = "1"; then
   AC_DEFINE(USE_MANUAL, 1, [If you want to build curl with the built-in manual])
+  curl_manual_msg="enabled"
 fi
 
 dnl set variable for use in automakefile(s)
 AM_CONDITIONAL(USE_MANUAL, test x"$USE_MANUAL" = x1)
 
+AC_MSG_CHECKING([whether to enable ares])
+AC_ARG_ENABLE(ares,
+AC_HELP_STRING([--enable-ares=PATH],[Enable ares for name lookups])
+AC_HELP_STRING([--disable-ares],[Disable ares for name lookups]),
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       ;;
+  *)   AC_MSG_RESULT(yes)
 
-dnl AC_PATH_PROG( RANLIB, ranlib, /usr/bin/ranlib, 
-dnl   $PATH:/usr/bin/:/usr/local/bin )
-dnl AC_SUBST(RANLIB)
+       if test "x$IPV6_ENABLED" = "x1"; then
+         AC_MSG_ERROR([ares doesn't work with ipv6, disable ipv6 to use ares])
+       fi
+
+       AC_DEFINE(USE_ARES, 1, [Define if you want to enable ares support])
+       dnl substitute HAVE_ARES for curl-config and similar
+       HAVE_ARES="1"
+       AC_SUBST(HAVE_ARES)
+       curl_ares_msg="enabled"
+
+       LIBS="$LIBS -lcares"
+
+       dnl For backwards compatibility default to includes/lib in srcdir/ares
+       dnl If a value is specified it is assumed that the libs are in $val/lib
+       dnl and the includes are in $val/include. This is the default setup for
+       dnl ares so it should not be a problem.
+       if test "x$enableval" = "xyes" ; then
+         if test -d "$srcdir/ares"; then
+            aresembedded="yes"
+            AC_CONFIG_SUBDIRS(ares)
+            aresinc=`cd $srcdir/ares && pwd`
+            CPPFLAGS="$CPPFLAGS -I$aresinc"
+
+            dnl the pwd= below cannot 'cd' into the ares dir to get the full
+            dnl path to it, since it may not exist yet if we build outside of
+            dnl the source tree
+            pwd=`pwd`
+            LDFLAGS="$LDFLAGS -L$pwd/ares"
+         fi
+       else
+         CPPFLAGS="$CPPFLAGS -I$enableval/include"
+         LDFLAGS="$LDFLAGS -L$enableval/lib"
+       fi
+
+       if test -z "$aresembedded"; then
+         dnl verify that a sufficient c-ares is here if we have pointed one
+         dnl out and don't use the "embedded" ares dir (in which case we don't
+         dnl check it because it might not have been built yet)
+         AC_MSG_CHECKING([that c-ares is good and recent enough])
+         AC_LINK_IFELSE( [
+#include <ares.h>
+/* provide a set of dummy functions in case c-ares was built with debug */
+void curl_dofree() { }
+void curl_sclose() { }
+void curl_domalloc() { }
+
+int main(void)
+{
+  ares_channel channel;
+  ares_cancel(channel);
+  return 0;
+}
+],
+          AC_MSG_RESULT(yes),
+          AC_MSG_RESULT(no)
+          AC_MSG_ERROR([c-ares library defective or too old])
+          )
+       fi
+       ;;
+  esac ],
+       AC_MSG_RESULT(no)
+)
 
 dnl ************************************************************
 dnl lame option to switch on debug options
@@ -1199,51 +1390,7 @@ AC_HELP_STRING([--disable-debug],[Disable debug options]),
        AC_MSG_RESULT(no)
 )
 
-AC_MSG_CHECKING([whether to enable ares])
-AC_ARG_ENABLE(ares,
-AC_HELP_STRING([--enable-ares=PATH],[Enable ares for name lookups])
-AC_HELP_STRING([--disable-ares],[Disable ares for name lookups]),
-[ case "$enableval" in
-  no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)   AC_MSG_RESULT(yes)
-
-       if test "x$IPV6_ENABLED" = "x1"; then
-         AC_MSG_ERROR([ares doesn't work with ipv6, disable ipv6 to use ares])
-       fi
-
-       AC_DEFINE(USE_ARES, 1, [Define if you want to enable ares support])
-       dnl substitute HAVE_ARES for curl-config and similar
-       HAVE_ARES="1"
-       AC_SUBST(HAVE_ARES)
-
-       LIBS="$LIBS -lcares"
-
-       dnl For backwards compatibility default to includes/lib in srcdir/ares
-       dnl If a value is specified it is assumed that the libs are in $val/lib
-       dnl and the includes are in $val/include. This is the default setup for
-       dnl ares so it should not be a problem.
-       if test "x$enableval" = "xyes" ; then
-         if test -d "$srcdir/ares"; then
-            AC_CONFIG_SUBDIRS(ares)
-            aresinc=`cd $srcdir/ares && pwd`
-            CPPFLAGS="$CPPFLAGS -I$aresinc"
-
-            dnl the pwd= below cannot 'cd' into the ares dir to get the full
-            dnl path to it, since it may not exist yet if we build outside of
-            dnl the source tree
-            pwd=`pwd`
-            LDFLAGS="$LDFLAGS -L$pwd/ares"
-         fi
-       else
-         CPPFLAGS="$CPPFLAGS -I$enableval/include"
-         LDFLAGS="$LDFLAGS -L$enableval/lib"
-       fi
-       ;;
-  esac ],
-       AC_MSG_RESULT(no)
-)
+AM_CONDITIONAL(CROSSCOMPILING, test x$cross_compiling = xyes)
 
 AC_CONFIG_FILES([Makefile \
 	   docs/Makefile \
@@ -1272,3 +1419,21 @@ AC_CONFIG_FILES([Makefile \
            curl-config
 ])
 AC_OUTPUT
+
+AC_MSG_NOTICE([Configured to build curl/libcurl:
+
+  curl version:    ${VERSION}
+  Host setup:      ${host}
+  Install prefix:  ${prefix}
+  Compiler:        ${CC}
+  SSL support:     ${curl_ssl_msg}
+  zlib support:    ${curl_zlib_msg}
+  krb4 support:    ${curl_krb4_msg}
+  GSSAPI support:  ${curl_gss_msg}
+  SNPEGO support:  ${curl_spnego_msg}
+  c-ares support:  ${curl_ares_msg}
+  ipv6 support:    ${curl_ipv6_msg}
+  IDN support:     ${curl_idn_msg}
+  Build libcurl:   Shared=${enable_shared}, Static=${enable_static} 
+  Built-in manual: ${curl_manual_msg}
+])

curl-style.el

@@ -2,17 +2,8 @@
 ;;;; $Id$
 
 ;;; The curl hacker's C conventions.
-
-;;; After loading this file and added the mode-hook you can in C
-;;; files, put something like this to use the curl style
-;;; automatically:
-;;
-;;   /* -----------------------------------------------------------------
-;;    * local variables:
-;;    * eval: (set c-file-style "curl")
-;;    * end:
-;;    */
-;;
+;;; See the sample.emacs file on how this file can be made to take
+;;; effect automatically when editing curl source files.
 
 (defconst curl-c-style
   '((c-basic-offset . 2)
@@ -37,12 +28,15 @@
   (setq tab-width 8
 	indent-tabs-mode nil		; Use spaces. Not tabs.
 	comment-column 40
-	c-font-lock-extra-types (append '("bool" "CURL" "CURLcode" "ssize_t" "size_t" "socklen_t" "fd_set" "time_t" "curl_off_t" "curl_socket_t"))
+	c-font-lock-extra-types (append '("bool" "CURL" "CURLcode" "ssize_t" "size_t" "socklen_t" "fd_set" "time_t" "curl_off_t" "curl_socket_t" "in_addr_t" "CURLSHcode" "CURLMcode" "Curl_addrinfo"))
 	)
   ;; keybindings for C, C++, and Objective-C.  We can put these in
   ;; c-mode-base-map because of inheritance ...
   (define-key c-mode-base-map "\M-q" 'c-fill-paragraph)
+  (define-key c-mode-base-map "\M-m" 'delete-trailing-whitespace)
   (setq c-recognize-knr-p nil)
+  ;;; (add-hook 'write-file-hooks 'delete-trailing-whitespace t)
+  (setq show-trailing-whitespace t)
   )
 
 ;; Set this is in your .emacs if you want to use the c-mode-hook as

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: March 16, 2004 (http://curl.haxx.se/docs/faq.html)
+Updated: August 10, 2004 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -19,8 +19,8 @@ FAQ
 
  2. Install Related Problems
   2.1 configure doesn't find OpenSSL even when it is installed
-   2.1.1. native linker doesn't find OpenSSL
-   2.1.2. only the libssl lib is missing
+   2.1.1 native linker doesn't find OpenSSL
+   2.1.2 only the libssl lib is missing
   2.2 Does curl work/build with other SSL libraries?
   2.3 Where can I find a copy of LIBEAY32.DLL?
   2.4 Does cURL support Socks (RFC 1928) ?
@@ -70,6 +70,7 @@ FAQ
   5.5 Does CURLOPT_WRITEDATA and CURLOPT_READDATA work on win32 ?
   5.6 What about Keep-Alive or persistent connections?
   5.7 Link errors when building libcurl on Windows!
+  5.8 libcurl.so.3: open failed: No such file or directory
 
  6. License Issues
   6.1 I have a GPL program, can I use the libcurl library?
@@ -223,11 +224,11 @@ FAQ
 
 2. Install Related Problems
 
-  2.1. configure doesn't find OpenSSL even when it is installed
+  2.1 configure doesn't find OpenSSL even when it is installed
 
   This may be because of several reasons.
 
-    2.1.1. native linker doesn't find openssl
+    2.1.1 native linker doesn't find openssl
 
     Affected platforms:
       Solaris (native cc compiler)
@@ -249,7 +250,7 @@ FAQ
 
     Solution submitted by: Bob Allison <allisonb@users.sourceforge.net>
 
-    2.1.2. only the libssl lib is missing
+    2.1.2 only the libssl lib is missing
 
     If all include files and the libcrypto lib is present, with only the
     libssl being missing according to configure, this is mostly likely because
@@ -262,14 +263,14 @@ FAQ
     configure. Make sure that you remove the config.cache file before you
     rerun configure with the new flags.
 
-  2.2. Does curl work/build with other SSL libraries?
+  2.2 Does curl work/build with other SSL libraries?
 
   Curl has been written to use OpenSSL, although there should not be much
   problems using a different library. If anyone does "port" curl to use a
   different SSL library, we are of course very interested in getting the
   patch!
 
-  2.3. Where can I find a copy of LIBEAY32.DLL?
+  2.3 Where can I find a copy of LIBEAY32.DLL?
 
   That is an OpenSSL binary built for Windows.
 
@@ -278,14 +279,14 @@ FAQ
   accurate and up-to-date pointers to recent OpenSSL DLLs and other binary
   packages.
 
-  2.4. Does cURL support Socks (RFC 1928) ?
+  2.4 Does cURL support Socks (RFC 1928) ?
 
-  Yes, SOCKS5 is supported when curl is built with IPv6 support disabled.
+  Yes, SOCKS5 is supported.
 
 
 3. Usage problems
 
-  3.1. curl: (1) SSL is disabled, https: not supported
+  3.1 curl: (1) SSL is disabled, https: not supported
 
   If you get this output when trying to get anything from a https:// server,
   it means that the configure script couldn't find all libs and include files
@@ -300,13 +301,13 @@ FAQ
   Also, check out the other paragraph in this FAQ labeled "configure doesn't
   find OpenSSL even when it is installed".
 
-  3.2. How do I tell curl to resume a transfer?
+  3.2 How do I tell curl to resume a transfer?
 
   Curl supports resumed transfers both ways on both FTP and HTTP.
 
   Try the -C option.
 
-  3.3. Why doesn't my posting using -F work?
+  3.3 Why doesn't my posting using -F work?
 
   You can't simply use -F or -d at your choice. The web server that will
   receive your post assumes one of the formats. If the form you're trying to
@@ -320,7 +321,7 @@ FAQ
   through the mailing list archives for old postings and questions regarding
   this.
 
-  3.4. How do I tell curl to run custom FTP commands?
+  3.4 How do I tell curl to run custom FTP commands?
 
   You can tell curl to perform optional commands both before and/or after a
   file transfer. Study the -Q/--quote option.
@@ -329,13 +330,13 @@ FAQ
   FTP commands without transferring anything. Therefore you must always specify
   a URL to transfer to/from even when doing custom FTP commands.
 
-  3.5. How can I disable the Pragma: nocache header?
+  3.5 How can I disable the Pragma: nocache header?
 
   You can change all internally generated headers by adding a replacement with
   the -H/--header option. By adding a header with empty contents you safely
   disable that one. Use -H "Pragma:" to disable that specific header.
 
-  3.6. Does curl support ASP, XML, XHTML or HTML version Y?
+  3.6 Does curl support ASP, XML, XHTML or HTML version Y?
 
   To curl, all contents are alike. It doesn't matter how the page was
   generated. It may be ASP, PHP, Perl, shell-script, SSI or plain
@@ -344,7 +345,7 @@ FAQ
 
   See also item 3.14 regarding javascript.
 
-  3.7. Can I use curl to delete/rename a file through FTP?
+  3.7 Can I use curl to delete/rename a file through FTP?
 
   Yes. You specify custom FTP commands with -Q/--quote.
 
@@ -456,15 +457,16 @@ FAQ
   3.15 Can I do recursive fetches with curl?
 
   No. curl itself has no code that performs recursive operations, such as
-  those performed by wget.
+  those performed by wget and similar tools.
 
   There exist wrapper scripts with that functionality (for example the
   curlmirror perl script), and you can write programs based on libcurl to do
   it, but the command line tool curl itself cannot.
 
+
 4. Running Problems
 
-  4.1. Problems connecting to SSL servers.
+  4.1 Problems connecting to SSL servers.
 
   It took a very long time before we could sort out why curl had problems to
   connect to certain SSL servers when using SSLeay or OpenSSL v0.9+.  The
@@ -479,7 +481,7 @@ FAQ
   There have also been examples where the remote server didn't like the SSLv2
   request and instead you had to force curl to use SSLv3 with -3/--sslv3.
 
-  4.2. Why do I get problems when I use & or % in the URL?
+  4.2 Why do I get problems when I use & or % in the URL?
 
   In general unix shells, the & letter is treated special and when used, it
   runs the specified command in the background. To safely send the & as a part
@@ -497,7 +499,7 @@ FAQ
   pass in a POST using -d/--data you must encode it as '%25' (which then also
   needs the %-letter doubled on Windows machines).
 
-  4.3. How can I use {, }, [ or ] to specify multiple URLs?
+  4.3 How can I use {, }, [ or ] to specify multiple URLs?
 
   Because those letters have a special meaning to the shell, and to be used in
   a URL specified to curl you must quote them.
@@ -511,7 +513,7 @@ FAQ
 
     curl -g 'www.site.com/weirdname[].html'
 
-  4.4. Why do I get downloaded data even though the web page doesn't exist?
+  4.4 Why do I get downloaded data even though the web page doesn't exist?
 
   Curl asks remote servers for the page you specify. If the page doesn't exist
   at the server, the HTTP protocol defines how the server should respond and
@@ -562,14 +564,14 @@ FAQ
     slash. Try the same operation again _with_ the trailing URL, or use the
     -L/--location option to follow the redirection.
 
-  4.6. Can you tell me what error code 142 means?
+  4.6 Can you tell me what error code 142 means?
 
   All error codes that are larger than the highest documented error code means
   that curl has exited due to a crash. This is a serious error, and we
   appreciate a detailed bug report from you that describes how we could go
   ahead and repeat this!
 
-  4.7. How do I keep user names and passwords secret in Curl command lines?
+  4.7 How do I keep user names and passwords secret in Curl command lines?
 
   This problem has two sides:
 
@@ -603,7 +605,7 @@ FAQ
   If there is a bug, read the BUGS document first. Then report it as described
   in there.
 
-  4.9. Curl can't authenticate to the server that requires NTLM?
+  4.9 Curl can't authenticate to the server that requires NTLM?
 
   This is supported in curl 7.10.6 or later. No earlier curl version knows
   of this magic.
@@ -651,9 +653,10 @@ FAQ
   Details are also in the SSLCERTS file in the release archives, found online
   here: http://curl.haxx.se/docs/sslcerts.html
 
+
 5. libcurl Issues
 
-  5.1. Is libcurl thread-safe?
+  5.1 Is libcurl thread-safe?
 
   Yes.
 
@@ -687,7 +690,7 @@ FAQ
         size_t
         WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
         {
-          register int realsize = size * nmemb;
+          size_t realsize = size * nmemb;
           struct MemoryStruct *mem = (struct MemoryStruct *)data;
 
           mem->memory = (char *)realloc(mem->memory, mem->size + realsize + 1);
@@ -743,6 +746,27 @@ FAQ
 
   (Provided by Andrew Francis)
 
+  5.8 libcurl.so.3: open failed: No such file or directory
+
+  This is an error message you might get when you try to run a program linked
+  with a shared version of libcurl and your run-time linker (ld.so) couldn't
+  find the shared library named libcurl.so.3.
+
+  You need to make sure that ld.so finds libcurl.so.3. You can do that
+  multiple ways, and it differs somewhat between different operating systems,
+  but they are usually:
+
+  * Add an option to the linker command line that specify the hard-coded path
+    the run-time linker should check for the lib (usually -R)
+
+  * Set an environment variable (LD_LIBRARY_PATH for example) where ld.so
+    should check for libs
+
+  * Adjust the system's config to check for libs in the directory where you've
+    put the dir (like Linux's /etc/ld.so.conf)
+
+  'man ld.so' and 'man ld' will tell you more details
+
 
 6. License Issues
 
@@ -751,32 +775,32 @@ FAQ
   is just a brief summary for the cases we get the most questions. (Parts of
   this section was much enhanced by Bjorn Reese.)
 
-  6.1. I have a GPL program, can I use the libcurl library?
+  6.1 I have a GPL program, can I use the libcurl library?
 
   Yes!
 
   Since libcurl may be distributed under the MIT/X derivate license, it can be
   used together with GPL in any software.
 
-  6.2. I have a closed-source program, can I use the libcurl library?
+  6.2 I have a closed-source program, can I use the libcurl library?
 
   Yes!
 
   libcurl does not put any restrictions on the program that uses the library.
 
-  6.3. I have a BSD licensed program, can I use the libcurl library?
+  6.3 I have a BSD licensed program, can I use the libcurl library?
 
   Yes!
 
   libcurl does not put any restrictions on the program that uses the library.
 
-  6.4. I have a program that uses LGPL libraries, can I use libcurl?
+  6.4 I have a program that uses LGPL libraries, can I use libcurl?
 
   Yes!
 
   The LGPL license doesn't clash with other licenses.
 
-  6.5. Can I modify curl/libcurl for my program and keep the changes secret?
+  6.5 Can I modify curl/libcurl for my program and keep the changes secret?
 
   Yes!
 
@@ -784,7 +808,7 @@ FAQ
   the sources, on the condition that the copyright texts in the sources are
   left intact.
 
-  6.6. Can you please change the curl/libcurl license to XXXX?
+  6.6 Can you please change the curl/libcurl license to XXXX?
 
   No.
 

docs/HISTORY

@@ -126,3 +126,16 @@ visitors to the curl.haxx.se site. Five official web mirrors.
 December 2003, full-fledged SSL for FTP is supported.
 
 January 2004: curl 7.11.0 introduced large file support.
+
+June 2004: curl 7.12.0 introduced IDN support. 10 official web mirrors.
+
+August 2004:
+ Curl and libcurl 7.12.1
+
+ Public curl release number:               82
+ Releases counted from the very beginning: 109
+ Available command line options:           96
+ Available curl_easy_setopt() options:     120
+ Number of public functions in libcurl:    36
+ Amount of public web site mirrors:        12
+ Number of known libcurl bindings:         26

docs/INSTALL

@@ -189,28 +189,33 @@ Win32
       Microsoft command line style
       ----------------------------
 
+        Run the 'vcvars32.bat' file to get a proper environment. The
+        vcvars32.bat file is part of the Microsoft development environment and
+        you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
+        provided that you installed Visual C/C++ 6 in the default directory.
+
+        Then run 'nmake vc' in curl's root directory.
+
+        If you want to compile with zlib support, you will need to build
+        zlib (http://www.gzip.org/zlib/) as well. Please read the zlib 
+        documentation on how to compile zlib. Define the ZLIB_PATH environment 
+        variable to the location of zlib.h and zlib.lib, for example:
+
+          set ZLIB_PATH=c:\zlib-1.2.1
+
+        Then run 'nmake vc-zlib' in curl's root directory.
+
+        If you want to compile with SSL support you need the OpenSSL package.
         Please read the OpenSSL documentation on how to compile and install
         the OpenSSL libraries.  The build process of OpenSSL generates the
         libeay32.dll and ssleay32.dll files in the out32dll subdirectory in
         the OpenSSL home directory.  OpenSSL static libraries (libeay32.lib,
         ssleay32.lib, RSAglue.lib) are created in the out32 subdirectory.
 
-        Run the 'vcvars32.bat' file to get a proper environment. The
-        vcvars32.bat file is part of the Microsoft development environment and
-        you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
-        provided that you installed Visual C/C++ 6 in the default directory.
-
         Before running nmake define the OPENSSL_PATH environment variable with
         the root/base directory of OpenSSL, for example:
 
-          set OPENSSL_PATH=c:\openssl-0.9.7a
-
-        lib/Makefile.vc6 depends on zlib (http://www.gzip.org/zlib/) as well.
-        Please read the zlib documentation on how to compile zlib.  Define the
-        ZLIB_PATH environment variable to the location of zlib.h and zlib.lib,
-        for example:
-
-          set ZLIB_PATH=c:\zlib-1.1.4
+          set OPENSSL_PATH=c:\openssl-0.9.7d
 
         Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
         directory.  'nmake vc-ssl' will create a libcurl static and dynamic
@@ -219,10 +224,11 @@ Win32
         version is a standalone executable not requiring any DLL at
         runtime. This make method requires that you have the static OpenSSL
         libraries available in OpenSSL's out32 subdirectory.
-	'nmake vc-ssl-dll' creates the libcurl dynamic library and
-	links curl.exe against libcurl and OpenSSL dynamically.
-	This executable requires libcurl.dll and the OpenSSL DLLs
-	at runtime.
+        'nmake vc-ssl-dll' creates the libcurl dynamic library and
+        links curl.exe against libcurl and OpenSSL dynamically.
+        This executable requires libcurl.dll and the OpenSSL DLLs
+        at runtime. 
+        Run 'nmake vc-ssl-zlib' to build with both ssl and zlib support.
 
       Microsoft / Borland style
       -------------------------
@@ -361,12 +367,12 @@ VMS
    the name can be fetched from external or internal message libraries
    Errorcode - the errodes assigned by the application
    Sev. - severity: Even = error, off = non error
-		0 = Warning
-		1 = Success
-		2 = Error
-		3 = Information
-		4 = Fatal 
-		<5-7> reserved.
+      0 = Warning
+      1 = Success
+      2 = Error
+      3 = Information
+      4 = Fatal 
+      <5-7> reserved.
 
    This all presents itself with:
    %<FACILITY>-<SeV>-<Errorname>, <Error message>
@@ -379,7 +385,7 @@ VMS
 
    This was all compiled with:
 
-	Compaq C V6.2-003 on OpenVMS Alpha V7.1-1H2
+      Compaq C V6.2-003 on OpenVMS Alpha V7.1-1H2
 
    So far for porting notes as of:
    13-jul-2001
@@ -472,6 +478,39 @@ AmigaOS
    you can find a precompiled package at http://amiga.sourceforge.net/OpenSSL/
 
 
+NetWare
+=======
+
+   To compile curl.nlm / libcurl.nlm you need:
+   - either any gcc / nlmconv, or CodeWarrior 7 PDK 4 or later.
+   - gnu make and awk running on the platform you compile on;
+     native Win32 versions can be downloaded from:
+     http://www.gknw.com/development/prgtools/ 
+   - recent Novell LibC SDK availabable from:
+     http://developer.novell.com/ndk/libc.htm
+   - optional zlib sources (at the moment only dynamic linking with zlib.imp); 
+     sources with NetWare Makefile can be optained from:
+     http://www.gknw.com/mirror/zlib/
+
+   Set a search path to your compiler, linker and tools; if you want to have
+   zlib support then set the environment var ZLIB_PATH pointing to your zlib
+   sources, on Linux make sure the var OSTYPE contains the string 'linux';
+   and finally type 'make netware' from the top source directory...
+   I found on some Linux systems (RH9) that OS detection didnt work although
+   a 'set | grep OSTYPE' shows the var present and set; I simply overwrote it
+   with 'OSTYPE=linux-rh9-gnu' and the detection in the Makefile worked...;
+   other options are currently not supported, although partly prepared.
+   The Ares lib builds arlready fine, and both test tools work fine at least 
+   when build with CodeWarrior...; dont know yet why they fail when build with
+   gcc though; if you want to compile with Ares support then set an env var
+   WITH_ARES=1; I've not tested yet including libcares into curl.
+   Any help in testing appreciated!
+   Buils automatically created 4 times a day from current CVS are here:
+   http://www.gknw.com/mirror/curl/autobuilds/
+   the status of these buids can be viewed at the autobuild table:
+   http://curl.haxx.se/auto/
+
+
 PORTS
 =====
    This is a probably incomplete list of known hardware and operating systems
@@ -549,3 +588,11 @@ OpenLDAP
 
       http://www.openldap.org
 
+Zlib
+====
+
+   You'll find Zlib information at:
+
+      http://www.gzip.org/zlib/
+
+

docs/KNOWN_BUGS

@@ -3,8 +3,18 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
-* NTLM authentication with passwords longer than 14 letters fail. There is
-  a known fix for this, planned to come in curl 7.11.2
+* To get HTTP Negotiate authentication to work fine, you need to provide a
+  (fake) user name (this concerns both curl and the lib) because the code
+  wrongly only considers authentication if there's a user name provided.
+  Bug report #1004841.
+
+* If you use a very large amount of file descriptors (more than FD_SETSIZE)
+  and then use libcurl, it might crash on its use of select() which then
+  stores data out of bounds. Bug report #948950.
+
+* --limit-rate using -d or -F does not work. This is because the limit logic
+  is provided by the curl app in its read/write callbacks, and when doing
+  -d/-F the callbacks aren't used! Bug report #921395.
 
 * Doing resumed upload over HTTP does not work with '-C -', because curl
   doesn't do a HEAD first to get the initial size. This needs to be done
@@ -22,13 +32,6 @@ may have been fixed since this was written!
   indicate that the user wants to reach the root dir (this exception SHALL
   remain even when this bug is fixed).
 
-* 1) libcurl does a POST
-  2) receives a 100-continue
-  3) sends away the POST
-  Now, if nothing else is returned from the server, libcurl MUST return
-  CURLE_GOT_NOTHING, but it seems it returns CURLE_OK as it seems to count
-  the 100-continue reply as a good enough reply.
-
 * libcurl doesn't treat the content-length of compressed data properly, as
   it seems HTTP servers send the *uncompressed* length in that header and
   libcurl thinks of it as the *compressed* lenght. Some explanations are here:
@@ -38,17 +41,11 @@ may have been fixed since this was written!
   locally, which is because libcurl doesn't call the write callback with zero
   bytes. Explained here: http://curl.haxx.se/mail/archive-2003-04/0143.html
 
-* Using CURLOPT_FAILONERROR (-f/--fail) will make authentication to stop
-  working if you use anything but plain Basic auth.
-
 * IPv6 support on AIX 4.3.3 doesn't work due to a missing sockaddr_storage
   struct. It has been reported to work on AIX 5.1 though.
 
 * GOPHER transfers seem broken
 
-* configure --disable-http is not fully supported. All other protocols seem
-  to work to disable.
-
 * If a HTTP server responds to a HEAD request and includes a body (thus
   violating the RFC2616), curl won't wait to read the response but just stop
   reading and return back. If a second request (let's assume a GET) is then

docs/LICENSE-MIXING

@@ -0,0 +1,83 @@
+         License Mixing with apps, libcurl and Third Party Libraries
+         ===========================================================
+
+libcurl can be built to use a fair amount of various third party libraries,
+libraries that are written and provided by other parties that are distributed
+using their own licenses. Even libcurl itself contains code that may cause
+problems to some. This document attempts to describe what licenses libcurl and
+the other libraries use and what possible dilemmas linking and mixing them all
+can lead to for end users.
+
+I am not a lawyer and this is not legal advice!
+
+One common dilemma is that GPL[*]-licensed code is not allowed to be linked
+with code licensed under the Original BSD license (with the announcement
+clause, unless there's a specified exception in the GPL-licensed module). You
+may still build your own copies that use them all, but distributing them as
+binaries would be to violate the GPL license. This particular problem was
+addressed when the Modified BSD license was created, which does not have the
+annoncement clause that collides with GPL.
+
+libcurl http://curl.haxx.se/docs/copyright.html
+
+        Uses an MIT (or Modified BSD)-style license that is as liberal as
+        possible.  Some of the source files that deal with KRB4 have Original
+        BSD-style announce-clause licenses. You may not distribute binaries
+        with krb4-enabled libcurl that also link with GPL-licensed code!
+
+OpenSSL http://www.openssl.org/source/license.html
+
+        Uses an Original BSD-style license with an announement clause that
+        makes it "incompatible" with GPL. You are not allowed to ship binaries
+        that link with OpenSSL that includes GPL code (unless that specific
+        GPL code includes an exception for OpenSSL - a habit that is growing
+        more and more common).
+
+c-ares  http://daniel.haxx.se/projects/c-ares/license.html
+
+        Uses an MIT license that is very liberal and imposes no restrictions
+        on any other library or part you may link with.
+
+zlib    http://www.gzip.org/zlib/zlib_license.html
+
+        Uses an MIT-style license that shouldn't collide with any other
+        library.
+
+krb4
+
+        While nothing in particular says that a Kerberos4 library must use any
+        particular license, the one I've tried and used successfully so far
+        (kth-krb4) is Original BSD-licensed with the announcement clause. Some
+        of the code in libcurl that is written to deal with Kerberos4 likewise
+        have such a license.
+
+GSSAPI
+
+        While nothing in particular says that a GSS/Kerberos5 library must use
+        any particular license, the one I've used (Heimdal) is Original BSD-
+        licensed with the announcement clause.
+
+fbopenssl
+
+        Unclear license. Based on its name, I assume that it uses the OpenSSL
+        license and thus shares the same issues as described for OpenSSL
+        above.
+
+libidn  http://www.gnu.org/licenses/lgpl.html
+
+        Uses the GNU Lesser General Public License. LGPL is a variation of GPL
+        with slightly less aggressive "copyleft". This license requires more
+        requirements to be met when distributing binaries, see the license for
+        details. Also note that if you distribute a binary that includes this
+        library, you must also include the full LGPL license text. Please
+        properly point out what parts of the distributed package that the
+        license addresses.
+
+OpenLDAP http://www.openldap.org/software/release/license.html
+
+        Uses a Modified BSD-style license. Since libcurl uses OpenLDAP as a
+        shared library only, I have not heard of anyone that ships OpenLDAP
+        linked with libcurl in an app.
+
+
+[*] = GPL - GNU General Public License: http://www.gnu.org/licenses/gpl.html

docs/MANUAL

@@ -63,6 +63,11 @@ USING PASSWORDS
 
         curl -u name:passwd ftp://machine.domain:port/full/path/to/file
 
+ FTPS
+
+   It is just like for FTP, but you may also want to specify and use
+   SSL-specific options for certificates etc.
+
  HTTP
 
    The HTTP URL doesn't support user and password in the URL string. Curl
@@ -75,6 +80,12 @@ USING PASSWORDS
 
         curl -u name:passwd http://machine.domain/full/path/to/file
 
+   HTTP offers many different methods of authentication and curl supports
+   several: Basic, Digest, NTLM and Negotiate. Without telling which method to
+   use, curl defaults to Basic. You can also ask curl to pick the most secure
+   ones out of the ones that the server accepts for the given URL, by using
+   --anyauth.
+
    NOTE! Since HTTP URLs don't support user and password, you can't use that
    style when using Curl via a proxy. You _must_ use the -u style fetch
    during such circumstances.
@@ -840,7 +851,7 @@ MAILING LISTS
 
   For your convenience, we have several open mailing lists to discuss curl,
   its development and things relevant to this. Get all info at
-  http://curl.haxx.se/mail/. The lists available are:
+  http://curl.haxx.se/mail/. Some of the lists available are:
 
   curl-users
 
@@ -854,24 +865,18 @@ MAILING LISTS
 
   curl-announce
 
-    Low-traffic. Only announcements of new public versions.
+    Low-traffic. Only receives announcements of new public versions. At worst,
+    that makes something like one or two mails per month, but usually only one
+    mail every second month.
 
-  curl-and-PHP
+  curl-and-php
 
     Using the curl functions in PHP. Everything curl with a PHP angle. Or PHP
     with a curl angle.
 
-  curl-commits
+  curl-and-python
 
-    Receives notifications on all CVS commits done to the curl source module.
-    This can become quite a large amount of mails during intense development,
-    be aware. This is for us who like email...
-
-  curl-www-commits
-
-    Receives notifications on all CVS commits done to the curl www module
-    (basicly the web site).  This can become quite a large amount of mails
-    during intense changing, be aware. This is for us who like email...
+    Python hackers using curl with or without the python binding pycurl.
 
   Please direct curl questions, feature requests and trouble reports to one of
   these mailing lists instead of mailing any individual.

docs/Makefile.am

@@ -4,28 +4,20 @@
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
-man_MANS = \
-	curl.1 \
-	curl-config.1
-
-GENHTMLPAGES = \
-	curl.html \
-	curl-config.html
+man_MANS = curl.1 curl-config.1
+GENHTMLPAGES = curl.html curl-config.html
+PDFPAGES = curl.pdf curl-config.pdf
 
 HTMLPAGES = $(GENHTMLPAGES) index.html
 
-PDFPAGES = \
-	curl.pdf \
-	curl-config.pdf
-
 SUBDIRS = examples libcurl
 
 CLEANFILES = $(GENHTMLPAGES) $(PDFPAGES)
 
 EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS SSLCERTS	\
-	     README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS	\
-	     VERSIONS KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) \
-	     HISTORY INSTALL libcurl-the-guide $(PDFPAGES)
+ README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS VERSIONS	\
+ KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) HISTORY INSTALL		\
+ $(PDFPAGES) LICENSE-MIXING README.netware
 
 MAN2HTML= roffit < $< >$@
 

docs/README.netware

@@ -0,0 +1,27 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+README.netware
+
+  Read the README file first.
+
+  Curl has been successfully compiled with gcc / nlmconv on different flavours
+  of Linux as well as with the official Metrowerks CodeWarrior compiler.
+  While not being the main development target, a continously growing share of 
+  curl users are NetWare-based, specially also consuming the lib from PHP.
+      
+  The unix-style man pages are tricky to read on windows, so therefore are all
+  those pages converted to HTML as well as pdf, and included in the release
+  archives.
+
+  The main curl.1 man page is also "built-in" in the command line tool. Use a
+  command line similar to this in order to extract a separate text file:
+
+        curl -M >manual.txt
+
+  Read the INSTALL file for instructions how to compile curl self.
+
+  

docs/SSLCERTS

@@ -1,35 +1,58 @@
                       Peer SSL Certificate Verification
                       =================================
 
-Since version 7.10, libcurl performs peer SSL certificate verification by
-default. This is done by installing a default CA cert bundle on 'make install'
-(or similar), that CA bundle package is used by default on operations against
-SSL servers.
+libcurl performs peer SSL certificate verification by default. This is done by
+installing a default CA cert bundle on 'make install' (or similar), that CA
+bundle package is used by default on operations against SSL servers.
 
-Alas, if you communicate with HTTPS servers using certificates that are signed
-by CAs present in the bundle, you will not notice any changed behavior and you
-will seamlessly get a higher security level on your SSL connections since you
-can be sure that the remote server really is the one it claims to be.
+If you communicate with HTTPS or FTPS servers using certificates that are
+signed by CAs present in the bundle, you can be sure that the remote server
+really is the one it claims to be.
 
 If the remote server uses a self-signed certificate, if you don't install
 curl's CA cert bundle, if the server uses a certificate signed by a CA that
-isn't included in the bundle or if the remoste host is an imposter
-impersonating your favourite site, and you want to transfer files from this
+isn't included in the bundle or if the remote host is an impostor
+impersonating your favorite site, and you want to transfer files from this
 server, do one of the following:
 
  1. Tell libcurl to *not* verify the peer. With libcurl you disable with with
     curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, FALSE);
 
-    With the curl command tool, you disable this with -k/--insecure.
+    With the curl command line tool, you disable this with -k/--insecure.
 
  2. Get a CA certificate that can verify the remote server and use the proper
     option to point out this CA cert for verification when connecting. For
     libcurl hackers: curl_easy_setopt(curl, CURLOPT_CAPATH, capath);
 
-    With the curl command tool: --cacert [file]
+    With the curl command line tool: --cacert [file]
 
-Neglecting to use one of the above menthods when dealing with a server using a
-certficate that isn't signed by one of the certficates in the installed CA
+ 3. Add the CA cert for your server to the existing default CA cert bundle.
+    The default path of the CA bundle installed with the curl package is:
+    /usr/local/share/curl/curl-ca-bundle.crt, which can be changed by running
+    configure with the --with-ca-bundle option pointing out the path of your
+    choice.
+
+    If you're using the curl command line tool, you can specify your own CA
+    cert path by setting the environment variable CURL_CA_BUNDLE to the path
+    of your choice.
+
+    If you're using the curl command line tool on Windows, curl will search
+    for a CA cert file named "curl-ca-bundle.crt" in these directories and in
+    this order:
+      1. application's directory
+      2. current working directory
+      3. Windows System directory (e.g. C:\windows\system32)
+      4. Windows Directory (e.g. C:\windows)
+      5. all directories along %PATH%
+
+ 4. Get a better/different/newer CA cert bundle! One option is to extract the
+    one a recent Mozilla browser uses, by following the instruction found
+    here:
+
+        http://curl.haxx.se/docs/caextract.html
+
+Neglecting to use one of the above methods when dealing with a server using a
+certificate that isn't signed by one of the certificates in the installed CA
 cert bundle, will cause SSL to report an error ("certificate verify failed")
 during the handshake and SSL will then refuse further communication with that
 server.
@@ -39,8 +62,3 @@ trouble for some users, since it adds security to a majority of the SSL
 connections that previously weren't really secure. It turned out many people
 were using previous versions of curl/libcurl without realizing the need for
 the CA cert options to get truly secure SSL connections.
-
-The default path of the CA bundle installed with the curl package is:
-/usr/local/share/curl/curl-ca-bundle.crt, which can be changed by running
-configure with the --with-ca-bundle option pointing out the path of your
-choice.

docs/TODO

@@ -57,6 +57,17 @@ TODO
 
  FTP
 
+ * Support GSS/Kerberos 5 for ftp file transfer. This will allow user
+   authentication and file encryption.  Possible libraries and example clients
+   are available from MIT or Heimdal. Requsted by Markus Moeller.
+
+ * Optimize the way libcurl uses CWD on each new request over a persistent
+   connection (on FTP) even if it doesn't have to.
+
+ * REST fix for servers not behaving well on >2GB requests. This should fail
+   if the server doesn't set the pointer to the requested index. The tricky
+   part is to figure out if the server did the right thing or not.
+
  * Support the most common FTP proxies, Philip Newton provided a list
    allegedly from ncftp:
    http://curl.haxx.se/mail/archive-2003-04/0126.html
@@ -70,10 +81,13 @@ TODO
  * Since USERPWD always override the user and password specified in URLs, we
    might need another way to specify user+password for anonymous ftp logins.
 
- HTTP
+ * The FTP code should get a way of returning errors that is known to still
+   have the control connection alive and sound. Currently, a returned error
+   from within ftp-functions does not tell if the control connection is still
+   OK to use or not. This causes libcurl to fail to re-use connections
+   slightly too often.
 
- * Digest and GSS-Negotiate support for HTTP proxies. They only work on
-   direct-connections to the server.
+ HTTP
 
  * Pipelining. Sending multiple requests before the previous one(s) are done.
    This could possibly be implemented using the multi interface to queue
@@ -91,6 +105,12 @@ TODO
 
  SSL
 
+ * Anton Fedorov's "dumpcert" patch:
+   http://curl.haxx.se/mail/lib-2004-03/0088.html
+
+ * Evaluate/apply Gertjan van Wingerde's SSL patches:
+   http://curl.haxx.se/mail/lib-2004-03/0087.html
+
  * If you really want to improve the SSL situation, you should probably have a
    look at SSL cafile loading as well - quick traces look to me like these are
    done on every request as well, when they should only be necessary once per
@@ -158,6 +178,18 @@ TODO
  * --data-encode that URL encodes the data before posting
    http://curl.haxx.se/mail/archive-2003-11/0091.html (Kevin Roth suggested)
 
+ * Provide a way to make options bound to a specific URL among several on the
+   command line. Possibly by letting ':' separate options between URLs,
+   similar to this:
+
+      curl --data foo --url url.com :
+          --url url2.com : \
+          --url url3.com --data foo3
+
+   (More details: http://curl.haxx.se/mail/archive-2004-07/0133.html)
+
+   The example would do a POST-GET-POST combination on a single command line.
+
  BUILD
 
  * Consider extending 'roffit' to produce decent ASCII output, and use that
@@ -185,10 +217,10 @@ TODO
  * curl_easy_cleanup() returns void, but curl_multi_cleanup() returns a
    CURLMcode. These should be changed to be the same.
 
- * curl_formparse() should be removed
-
  * remove obsolete defines from curl/curl.h
 
+ * make several functions use size_t instead of int in their APIs
+
  * remove the following functions from the public API:
    curl_getenv
    curl_mprintf (and variations)

docs/TheArtOfHttpScripting

@@ -370,11 +370,11 @@ Version: 0.6
 
   In the HTTPS world, you use certificates to validate that you are the one
   you you claim to be, as an addition to normal passwords. Curl supports
-  client-side certificates. All certificates are locked with a PIN-code, why
-  you need to enter the unlock-code before the certificate can be used by
-  curl. The PIN-code can be specified on the command line or if not, entered
-  interactively when curl queries for it. Use a certificate with curl on a
-  HTTPS server like:
+  client-side certificates. All certificates are locked with a pass phrase,
+  which you need to enter before the certificate can be used by curl. The pass
+  phrase can be specified on the command line or if not, entered interactively
+  when curl queries for it. Use a certificate with curl on a HTTPS server
+  like:
 
         curl -E mycert.pem https://that.secure.server.com
 

docs/curl.1

@@ -1,8 +1,27 @@
-.\" You can view this file with:
-.\" nroff -man curl.1
-.\" Written by Daniel Stenberg
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" * $Id$
+.\" **************************************************************************
 .\"
-.TH curl 1 "5 Mar 2004" "Curl 7.11.1" "Curl Manual"
+.TH curl 1 "3 May 2004" "Curl 7.12" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -37,9 +56,10 @@ or you can get sequences of alphanumeric series by using [] as in:
  ftp://ftp.numericals.com/file[001-100].txt    (with leading zeros)
  ftp://ftp.letters.com/file[a-z].txt
 
-No nesting of the sequences is supported at the moment:
+No nesting of the sequences is supported at the moment, but you can use
+several ones next to each other:
 
- http://www.any.org/archive[1996-1999]/volume[1-4]part{a,b,c,index}.html
+ http://any.org/archive[1996-1999]/vol[1-4]/part{a,b,c}.html
 
 You can specify any amount of URLs on the command line. They will be fetched
 in a sequential manner in the specified order.
@@ -123,7 +143,7 @@ If this option is used several times, each occurrence will toggle it on/off.
 .IP "--connect-timeout <seconds>"
 Maximum time in seconds that you allow the connection to the server to take.
 This only limits the connection phase, once curl has connected this option is
-of no more use. See also the \fI--max-time\fP option.
+of no more use. See also the \fI-m/--max-time\fP option.
 
 If this option is used several times, the last one will be used.
 .IP "-c/--cookie-jar <file name>"
@@ -153,8 +173,12 @@ transfer. It then uses the given output/input files to figure that out.
 
 If this option is used several times, the last one will be used.
 .IP "--create-dirs"
-When used in conjunction with the -o option, curl will create the necessary 
-local directory hierarchy as needed.
+When used in conjunction with the -o option, curl will create the necessary
+local directory hierarchy as needed. This option creates the dirs mentioned
+with the -o option, nothing else. If the -o file name uses no dir or if the
+dirs it mentions already exist, no dir will be created.
+
+To create remote directories when using FTP, try \fI--ftp-create-dirs\fP.
 .IP "--crlf"
 (FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).
 
@@ -589,11 +613,23 @@ You may use this option as many times as you have number of URLs.
 (SSL) Pass phrase for the private key
 
 If this option is used several times, the last one will be used.
+.IP "--proxy-basic"
+Tells curl to use HTTP Basic authentication when communicating with the given
+proxy. Use \fI--basic\fP for enabling HTTP Basic with a remote host. Basic is
+the default authentication method curl uses with proxies.
+
+If this option is used twice, the second will again disable proxy HTTP Basic
+authentication.
+.IP "--proxy-digest"
+Tells curl to use HTTP Digest authentication when communicating with the given
+proxy. Use \fI--digest\fP for enabling HTTP Digest with a remote host.
+
+If this option is used twice, the second will again disable proxy HTTP Digest.
 .IP "--proxy-ntlm"
-Tells curl to use NTLM authentication when communicating with the given
+Tells curl to use HTTP NTLM authentication when communicating with the given
 proxy. Use \fI--ntlm\fP for enabling NTLM with a remote host.
 
-If this option is used twice, the second will again disable proxy NTLM.
+If this option is used twice, the second will again disable proxy HTTP NTLM.
 .IP "-p/--proxytunnel"
 When an HTTP proxy is used (\fI-x/--proxy\fP), this option will cause non-HTTP
 protocols to attempt to tunnel through the proxy instead of merely using it to
@@ -626,13 +662,12 @@ instead of PORT by using \fI--disable-eprt\fP. EPRT is really PORT++.
 If used as the first parameter on the command line, the \fI$HOME/.curlrc\fP
 file will not be read and used as a config file.
 .IP "-Q/--quote <comand>"
-(FTP) Send an arbitrary command to the remote FTP server, by using the QUOTE
-command of the server. Not all servers support this command, and the set of
-QUOTE commands are server specific! Quote commands are sent BEFORE the
-transfer is taking place. To make commands take place after a successful
-transfer, prefix them with a dash '-'. You may specify any amount of commands
-to be run before and after the transfer. If the server returns failure for one
-of the commands, the entire operation will be aborted.
+(FTP) Send an arbitrary command to the remote FTP server. Quote commands are
+sent BEFORE the transfer is taking place. To make commands take place after a
+successful transfer, prefix them with a dash '-'. You may specify any amount
+of commands to be run before and after the transfer. If the server returns
+failure for one of the commands, the entire operation will be aborted. You
+must send syntactically correct FTP commands as RFC959 defines.
 
 This option can be used multiple times.
 .IP "--random-file <file>"
@@ -707,6 +742,11 @@ is a plain '-', it is instead written to stdout. This option has no point when
 you're using a shell with decent redirecting capabilities.
 
 If this option is used several times, the last one will be used.
+.IP "--tcp-nodelay"
+Turn on the TCP_NODELAY option. See the \fIcurl_easy_setopt(3)\fP man page for
+details about this option. (Added in 7.11.2)
+
+If this option is used several times, each occurance toggles this on/off.
 .IP "-t/--telnet-option <OPT=val>"
 Pass options to the telnet protocol. Supported options are:
 
@@ -816,6 +856,8 @@ This curl uses asynchronous name resolves.
 SPNEGO Negotiate authenticaion is supported.
 .IP "Largefile"
 This curl supports transfers of large files, files larger than 2GB.
+.IP "IDN"
+This curl supports IDN - international domain names.
 .RE
 .IP "-w/--write-out <format>"
 Defines what to display after a completed and successful operation. The format

docs/examples/Makefile.am

@@ -5,11 +5,11 @@
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
 EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit2.c		\
-	     persistant.c ftpget.c Makefile.example			\
-	     multithread.c getinmemory.c ftpupload.c httpput.c		\
-	     simplessl.c ftpgetresp.c http-post.c post-callback.c	\
-	     multi-app.c multi-double.c multi-single.c multi-post.c	\
-	     fopen.c simplepost.c makefile.dj curlx.c
+ persistant.c ftpget.c Makefile.example multithread.c getinmemory.c	\
+ ftpupload.c httpput.c simplessl.c ftpgetresp.c http-post.c		\
+ post-callback.c multi-app.c multi-double.c multi-single.c		\
+ multi-post.c fopen.c simplepost.c makefile.dj curlx.c https.c		\
+ multi-debugcallback.c fileupload.c getinfo.c ftp3rdparty.c
 
 all:
 	@echo "done"

docs/examples/fileupload.c

@@ -0,0 +1,65 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+  curl_off_t size;
+  struct stat file_info;
+  double speed_upload, total_time;
+  FILE *fd;
+
+  fd = fopen("debugit", "r"); /* open file to upload */
+  if(!fd) {
+
+    return 1; /* can't continue */
+  }
+
+  stat("debugit", &file_info); /* to get the file size */
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* upload to this place */
+    curl_easy_setopt(curl, CURLOPT_URL,
+                     "file:///home/dast/src/curl/debug/new");
+
+    /* tell it to "upload" to the URL */
+    curl_easy_setopt(curl, CURLOPT_UPLOAD, 1);
+
+    /* set where to read from (on Windows you need to use READFUNCTION too) */
+    curl_easy_setopt(curl, CURLOPT_READDATA, fd);
+
+    /* and give the size of the upload (optional) */
+    curl_easy_setopt(curl, CURLOPT_INFILESIZE_LARGE,
+                     (curl_off_t)file_info.st_size);
+
+    /* enable verbose for easier tracing */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+
+    res = curl_easy_perform(curl);
+
+    /* now extract transfer info */
+    curl_easy_getinfo(curl, CURLINFO_SPEED_UPLOAD, &speed_upload);
+    curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME, &total_time);
+
+    fprintf(stderr, "Speed: %.3f bytes/sec during %.3f seconds\n",
+            speed_upload, total_time);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/ftp3rdparty.c

@@ -0,0 +1,104 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+/*
+ * This is an example showing how to transfer a file between two remote hosts.
+ */
+
+
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+  char sourceFileName[] = "/tmp/file";
+  char targetFileName[] = "/tmp/curlTargetTest.dat";
+  char sourceHost[] = "source";
+  char targetHost[] = "target";
+  char sourceUserPass[] = "user:pass";
+  char targetUserPass[] = "user:pass";
+  char url[100];
+  
+  struct curl_slist *source_pre_cmd = NULL;
+  struct curl_slist *target_pre_cmd = NULL;
+  struct curl_slist *source_post_cmd = NULL;
+  struct curl_slist *target_post_cmd = NULL;
+  char cmd[] = "PWD";   /* just to test */
+
+  curl_global_init(CURL_GLOBAL_DEFAULT);
+  
+  curl = curl_easy_init();
+  if (curl) {
+    sprintf(url, "ftp://%s@%s/%s", targetUserPass, targetHost, targetFileName);
+    printf("%s\n", url);
+    curl_easy_setopt(curl, CURLOPT_URL, url);
+
+    /* Set a proxy host */
+    curl_easy_setopt(curl, CURLOPT_SOURCE_HOST, sourceHost);
+
+    /* Set a proxy user and password */
+    curl_easy_setopt(curl, CURLOPT_SOURCE_USERPWD, sourceUserPass);
+
+    /* Set a proxy full file name */
+    curl_easy_setopt(curl, CURLOPT_SOURCE_PATH, sourceFileName);
+
+    /* Set a proxy passive host */
+    curl_easy_setopt(curl, CURLOPT_PASV_HOST, 0);   /* optional */
+
+    /* build a list of commands to pass to libcurl */
+    source_pre_cmd = curl_slist_append(source_pre_cmd, cmd);
+    /* Set a proxy pre-quote command */
+    curl_easy_setopt(curl, CURLOPT_SOURCE_PREQUOTE, source_pre_cmd);
+
+    /* build a list of commands to pass to libcurl */
+    target_pre_cmd = curl_slist_append(target_pre_cmd, cmd);
+    /* Set a pre-quote command */
+    curl_easy_setopt(curl, CURLOPT_PREQUOTE, target_pre_cmd);
+
+    /* build a list of commands to pass to libcurl */
+    source_post_cmd = curl_slist_append(source_post_cmd, cmd);
+    /* Set a proxy post-quote command */
+    curl_easy_setopt(curl, CURLOPT_SOURCE_POSTQUOTE, source_post_cmd);
+
+    /* build a list of commands to pass to libcurl */
+    target_post_cmd = curl_slist_append(target_post_cmd, cmd);
+    /* Set a post-quote command */
+    curl_easy_setopt(curl, CURLOPT_POSTQUOTE, target_post_cmd);
+    
+    /* Switch on full protocol/debug output */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+
+    res = curl_easy_perform(curl);
+
+    /* clean up the FTP commands list */
+    curl_slist_free_all(source_pre_cmd);
+    curl_slist_free_all(target_pre_cmd);
+    curl_slist_free_all(source_post_cmd);
+    curl_slist_free_all(target_post_cmd);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+
+    if(CURLE_OK != res) {
+      /* we failed */
+      fprintf(stderr, "curl told us %d\n", res);
+    }
+  }
+
+  curl_global_cleanup();
+
+  return 0;
+}

docs/examples/ftpupload.c

@@ -1,8 +1,8 @@
 /*****************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
  * $Id$
@@ -46,7 +46,7 @@ int main(int argc, char **argv)
   close(hd) ;
 
   /* get a FILE * of the same file, could also be made with
-     fdopen() from the previous descriptor, but hey this is just 
+     fdopen() from the previous descriptor, but hey this is just
      an example! */
   hd_src = fopen(LOCAL_FILE, "rb");
 

docs/examples/getinfo.c

@@ -0,0 +1,37 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl = curl_easy_init();
+  if(curl) {
+    curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
+    res = curl_easy_perform(curl);
+
+    if(CURLE_OK == res) {
+      char *ct;
+      /* ask for the content-type */
+      res = curl_easy_getinfo(curl, CURLINFO_CONTENT_TYPE, &ct);
+
+      if((CURLE_OK == res) && ct)
+        printf("We received Content-Type: %s\n", ct);
+    }
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/getinmemory.c

@@ -62,6 +62,10 @@ int main(int argc, char **argv)
   /* we pass our 'chunk' struct to the callback function */
   curl_easy_setopt(curl_handle, CURLOPT_WRITEDATA, (void *)&chunk);
 
+  /* some servers don't like requests that are made without a user-agent
+     field, so we provide one */
+  curl_easy_setopt(curl_handle, CURLOPT_USERAGENT, "libcurl-agent/1.0");
+
   /* get it! */
   curl_easy_perform(curl_handle);
 

docs/examples/https.c

@@ -0,0 +1,53 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl = curl_easy_init();
+  if(curl) {
+    curl_easy_setopt(curl, CURLOPT_URL, "https://sourceforge.net/");
+
+#ifdef SKIP_PEER_VERIFICATION
+    /*
+     * If you want to connect to a site who isn't using a certificate that is
+     * signed by one of the certs in the CA bundle you have, you can skip the
+     * verification of the server's certificate. This makes the connection
+     * A LOT LESS SECURE.
+     *
+     * If you have a CA cert for the server stored someplace else than in the
+     * default bundle, then the CURLOPT_CAPATH option might come handy for
+     * you.
+     */
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, FALSE);
+#endif
+
+#ifdef SKIP_HOSTNAME_VERFICATION
+    /*
+     * If the site you're connecting to uses a different host name that what
+     * they have mentioned in their server certificate's commonName (or
+     * subjectAltName) fields, libcurl will refuse to connect. You can skip
+     * this check, but this will make the connection less secure.
+     */
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0);
+#endif
+
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/examples/makefile.dj

@@ -5,7 +5,7 @@
 
 include ../../packages/DOS/common.dj
 
-CFLAGS += -I../../include
+CFLAGS += -I../../include -DFALSE=0 -DTRUE=1
 
 LIBS = ../../lib/libcurl.a
 
@@ -15,14 +15,16 @@ endif
 
 LIBS += $(WATT32_ROOT)/lib/libwatt.a $(ZLIB_ROOT)/libz.a
 
-PROGRAMS  = fopen.exe ftpget.exe ftpgetre.exe ftpuploa.exe getinmem.exe \
-            http-pos.exe httpput.exe multi-ap.exe multi-do.exe          \
-            multi-po.exe multi-si.exe persista.exe post-cal.exe         \
-            postit2.exe sepheade.exe simple.exe simpless.exe
+PROGRAMS  = fopen.exe ftpget.exe ftpgetresp.exe ftpupload.exe \
+            getinmemory.exe http-post.exe httpput.exe multi-app.exe \
+            multi-double.exe multi-post.exe multi-single.exe \
+            persistant.exe post-callback.exe postit2.exe \
+            sepheaders.exe simple.exe simplessl.exe https.exe \
+            ftp3rdparty.exe getinfo.exe
 
 all: $(PROGRAMS)
 
-.c.exe:
+%.exe: %.c
 	$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
 	@echo
 

docs/examples/multi-debugcallback.c

@@ -0,0 +1,178 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is a very simple example using the multi interface and the debug
+ * callback.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+/* somewhat unix-specific */
+#include <sys/time.h>
+#include <unistd.h>
+
+/* curl stuff */
+#include <curl/curl.h>
+
+typedef char bool;
+#define TRUE 1
+
+static
+void dump(const char *text,
+          FILE *stream, unsigned char *ptr, size_t size,
+          bool nohex)
+{
+  size_t i;
+  size_t c;
+
+  unsigned int width=0x10;
+
+  if(nohex)
+    /* without the hex output, we can fit more on screen */
+    width = 0x40;
+
+  fprintf(stream, "%s, %zd bytes (0x%zx)\n", text, size, size);
+
+  for(i=0; i<size; i+= width) {
+
+    fprintf(stream, "%04zx: ", i);
+
+    if(!nohex) {
+      /* hex not disabled, show it */
+      for(c = 0; c < width; c++)
+        if(i+c < size)
+          fprintf(stream, "%02x ", ptr[i+c]);
+        else
+          fputs("   ", stream);
+    }
+
+    for(c = 0; (c < width) && (i+c < size); c++) {
+      /* check for 0D0A; if found, skip past and start a new line of output */
+      if (nohex && (i+c+1 < size) && ptr[i+c]==0x0D && ptr[i+c+1]==0x0A) {
+        i+=(c+2-width);
+        break;
+      }
+      fprintf(stream, "%c",
+              (ptr[i+c]>=0x20) && (ptr[i+c]<0x80)?ptr[i+c]:'.');
+      /* check again for 0D0A, to avoid an extra \n if it's at width */
+      if (nohex && (i+c+2 < size) && ptr[i+c+1]==0x0D && ptr[i+c+2]==0x0A) {
+        i+=(c+3-width);
+        break;
+      }
+    }
+    fputc('\n', stream); /* newline */
+  }
+  fflush(stream);
+}
+
+static
+int my_trace(CURL *handle, curl_infotype type,
+             unsigned char *data, size_t size,
+             void *userp)
+{
+  const char *text;
+
+  (void)handle; /* prevent compiler warning */
+
+  switch (type) {
+  case CURLINFO_TEXT:
+    fprintf(stderr, "== Info: %s", data);
+  default: /* in case a new one is introduced to shock us */
+    return 0;
+
+  case CURLINFO_HEADER_OUT:
+    text = "=> Send header";
+    break;
+  case CURLINFO_DATA_OUT:
+    text = "=> Send data";
+    break;
+  case CURLINFO_HEADER_IN:
+    text = "<= Recv header";
+    break;
+  case CURLINFO_DATA_IN:
+    text = "<= Recv data";
+    break;
+  }
+
+  dump(text, stderr, data, size, TRUE);
+  return 0;
+}
+
+/*
+ * Simply download a HTTP file.
+ */
+int main(int argc, char **argv)
+{
+  CURL *http_handle;
+  CURLM *multi_handle;
+
+  int still_running; /* keep number of running handles */
+
+  http_handle = curl_easy_init();
+
+  /* set the options (I left out a few, you'll get the point anyway) */
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+
+  curl_easy_setopt(http_handle, CURLOPT_DEBUGFUNCTION, my_trace);
+  curl_easy_setopt(http_handle, CURLOPT_VERBOSE, TRUE);
+
+  /* init a multi stack */
+  multi_handle = curl_multi_init();
+
+  /* add the individual transfers */
+  curl_multi_add_handle(multi_handle, http_handle);
+
+  /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      still_running = 0;
+      printf("select() returns error, this is badness\n");
+      break;
+    case 0:
+    default:
+      /* timeout or readable/writable sockets */
+      while(CURLM_CALL_MULTI_PERFORM ==
+            curl_multi_perform(multi_handle, &still_running));
+      break;
+    }
+  }
+
+  curl_multi_cleanup(multi_handle);
+
+  curl_easy_cleanup(http_handle);
+
+  return 0;
+}

docs/examples/multi-single.c

@@ -1,8 +1,8 @@
 /*****************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
  * $Id$
@@ -70,6 +70,8 @@ int main(int argc, char **argv)
     switch(rc) {
     case -1:
       /* select error */
+      still_running = 0;
+      printf("select() returns error, this is badness\n");
       break;
     case 0:
     default:

docs/examples/postit2.c

@@ -33,8 +33,8 @@ int main(int argc, char *argv[])
   CURL *curl;
   CURLcode res;
 
-  struct HttpPost *formpost=NULL;
-  struct HttpPost *lastptr=NULL;
+  struct curl_httppost *formpost=NULL;
+  struct curl_httppost *lastptr=NULL;
   struct curl_slist *headerlist=NULL;
   char buf[] = "Expect:";
 

docs/index.html

@@ -1,13 +1,13 @@
-<HTML>
-<HEAD>
-<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
-<TITLE>Index to Curl documentation</TITLE>
-</HEAD>
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html><head>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<title>Index to Curl documentation</title>
+</head>
 
-<BODY>
-<H1 ALIGN="CENTER">Index to Curl documentation</H1>
+<body>
+<h1 align="center">Index to Curl documentation</h1>
 
-<H2>Programs</H2>
+<h2>Programs</h2>
 <a href="curl-config.html">curl-config</A>
 <br><a href="curl.html">curl</A>
 
@@ -17,5 +17,4 @@
 <h2>libcurl</h2>
 See the <a href="libcurl/index.html">libcurl section</a>
 
-</BODY>
-</HTML>
+</body></html>

docs/libcurl/Makefile.am

@@ -4,119 +4,51 @@
 
 AUTOMAKE_OPTIONS = foreign no-dependencies
 
-man_MANS = \
-	curl_easy_cleanup.3 \
-	curl_easy_getinfo.3 \
-	curl_easy_init.3 \
-	curl_easy_perform.3 \
-	curl_easy_setopt.3 \
-	curl_easy_duphandle.3 \
-	curl_formparse.3 \
-	curl_formadd.3 \
-	curl_formfree.3 \
-	curl_getdate.3 \
-	curl_getenv.3 \
-	curl_slist_append.3 \
-	curl_slist_free_all.3 \
-	curl_version.3 \
-	curl_version_info.3 \
-	curl_escape.3 \
-	curl_unescape.3 \
-	curl_free.3 \
-	curl_strequal.3 \
-	curl_strnequal.3 \
-	curl_mprintf.3 \
-	curl_global_init.3 \
-	curl_global_cleanup.3 \
-	curl_multi_add_handle.3 \
-	curl_multi_cleanup.3 \
-	curl_multi_fdset.3 \
-	curl_multi_info_read.3 \
-	curl_multi_init.3 \
-	curl_multi_perform.3 \
-	curl_multi_remove_handle.3 \
-        curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 \
-	libcurl.3 \
-	libcurl-easy.3 \
-	libcurl-multi.3 \
-	libcurl-share.3 \
-	libcurl-errors.3
+man_MANS = curl_easy_cleanup.3 curl_easy_getinfo.3 curl_easy_init.3	\
+ curl_easy_perform.3 curl_easy_setopt.3 curl_easy_duphandle.3		\
+ curl_formadd.3 curl_formfree.3 curl_getdate.3 curl_getenv.3		\
+ curl_slist_append.3 curl_slist_free_all.3 curl_version.3		\
+ curl_version_info.3 curl_escape.3 curl_unescape.3 curl_free.3		\
+ curl_strequal.3 curl_mprintf.3 curl_global_init.3			\
+ curl_global_cleanup.3 curl_multi_add_handle.3 curl_multi_cleanup.3	\
+ curl_multi_fdset.3 curl_multi_info_read.3 curl_multi_init.3		\
+ curl_multi_perform.3 curl_multi_remove_handle.3 curl_share_cleanup.3	\
+ curl_share_init.3 curl_share_setopt.3 libcurl.3 libcurl-easy.3		\
+ libcurl-multi.3 libcurl-share.3 libcurl-errors.3 curl_easy_strerror.3	\
+ curl_multi_strerror.3 curl_share_strerror.3 curl_global_init_mem.3	\
+ libcurl-tutorial.3 curl_easy_reset.3
 
-HTMLPAGES = \
-	curl_easy_cleanup.html \
-	curl_easy_getinfo.html \
-	curl_easy_init.html \
-	curl_easy_perform.html \
-	curl_easy_setopt.html \
-	curl_easy_duphandle.html \
-	curl_formadd.html \
-	curl_formparse.html \
-	curl_formfree.html \
-	curl_getdate.html \
-	curl_getenv.html \
-	curl_slist_append.html \
-	curl_slist_free_all.html \
-	curl_version.html \
-	curl_version_info.html \
-	curl_escape.html \
-	curl_unescape.html \
-	curl_free.html \
-	curl_strequal.html \
-	curl_strnequal.html \
-	curl_mprintf.html \
-	curl_global_init.html \
-	curl_global_cleanup.html \
-	curl_multi_add_handle.html \
-	curl_multi_cleanup.html \
-	curl_multi_fdset.html \
-	curl_multi_info_read.html \
-	curl_multi_init.html \
-	curl_multi_perform.html \
-	curl_multi_remove_handle.html \
-        curl_share_cleanup.html curl_share_init.html curl_share_setopt.html \
-	libcurl.html \
-	libcurl-multi.html \
-	libcurl-easy.html \
-	libcurl-share.html \
-	libcurl-errors.html
+HTMLPAGES = curl_easy_cleanup.html curl_easy_getinfo.html		\
+ curl_easy_init.html curl_easy_perform.html curl_easy_setopt.html	\
+ curl_easy_duphandle.html curl_formadd.html curl_formfree.html		\
+ curl_getdate.html curl_getenv.html curl_slist_append.html		\
+ curl_slist_free_all.html curl_version.html curl_version_info.html	\
+ curl_escape.html curl_unescape.html curl_free.html curl_strequal.html	\
+ curl_mprintf.html curl_global_init.html curl_global_cleanup.html	\
+ curl_multi_add_handle.html curl_multi_cleanup.html			\
+ curl_multi_fdset.html curl_multi_info_read.html curl_multi_init.html	\
+ curl_multi_perform.html curl_multi_remove_handle.html			\
+ curl_share_cleanup.html curl_share_init.html curl_share_setopt.html	\
+ libcurl.html libcurl-multi.html libcurl-easy.html libcurl-share.html	\
+ libcurl-errors.html curl_easy_strerror.html curl_multi_strerror.html	\
+ curl_share_strerror.html curl_global_init_mem.html			\
+ libcurl-tutorial.html curl_easy_reset.html
 
-PDFPAGES = \
-	curl_easy_cleanup.pdf \
-	curl_easy_getinfo.pdf \
-	curl_easy_init.pdf \
-	curl_easy_perform.pdf \
-	curl_easy_setopt.pdf \
-	curl_easy_duphandle.pdf \
-	curl_formadd.pdf \
-	curl_formparse.pdf \
-	curl_formfree.pdf \
-	curl_getdate.pdf \
-	curl_getenv.pdf \
-	curl_slist_append.pdf \
-	curl_slist_free_all.pdf \
-	curl_version.pdf \
-	curl_version_info.pdf \
-	curl_escape.pdf \
-	curl_unescape.pdf \
-	curl_free.pdf \
-	curl_strequal.pdf \
-	curl_strnequal.pdf \
-	curl_mprintf.pdf \
-	curl_global_init.pdf \
-	curl_global_cleanup.pdf \
-	curl_multi_add_handle.pdf \
-	curl_multi_cleanup.pdf \
-	curl_multi_fdset.pdf \
-	curl_multi_info_read.pdf \
-	curl_multi_init.pdf \
-	curl_multi_perform.pdf \
-	curl_multi_remove_handle.pdf \
-        curl_share_cleanup.pdf curl_share_init.pdf curl_share_setopt.pdf \
-	libcurl.pdf \
-	libcurl-multi.pdf \
-	libcurl-easy.pdf \
-	libcurl-share.pdf \
-	libcurl-errors.pdf
+PDFPAGES = curl_easy_cleanup.pdf curl_easy_getinfo.pdf			\
+ curl_easy_init.pdf curl_easy_perform.pdf curl_easy_setopt.pdf		\
+ curl_easy_duphandle.pdf curl_formadd.pdf curl_formfree.pdf		\
+ curl_getdate.pdf curl_getenv.pdf curl_slist_append.pdf			\
+ curl_slist_free_all.pdf curl_version.pdf curl_version_info.pdf		\
+ curl_escape.pdf curl_unescape.pdf curl_free.pdf curl_strequal.pdf	\
+ curl_mprintf.pdf curl_global_init.pdf curl_global_cleanup.pdf		\
+ curl_multi_add_handle.pdf curl_multi_cleanup.pdf curl_multi_fdset.pdf	\
+ curl_multi_info_read.pdf curl_multi_init.pdf curl_multi_perform.pdf	\
+ curl_multi_remove_handle.pdf curl_share_cleanup.pdf			\
+ curl_share_init.pdf curl_share_setopt.pdf libcurl.pdf			\
+ libcurl-multi.pdf libcurl-easy.pdf libcurl-share.pdf			\
+ libcurl-errors.pdf curl_easy_strerror.pdf curl_multi_strerror.pdf	\
+ curl_share_strerror.pdf curl_global_init_mem.pdf libcurl-tutorial.pdf	\
+ curl_easy_reset.pdf
 
 CLEANFILES = $(HTMLPAGES) $(PDFPAGES)
 

docs/libcurl/curl_easy_duphandle.3

@@ -31,5 +31,4 @@ If this function returns NULL, something went wrong and no valid handle was
 returned.
 .SH "SEE ALSO"
 .BR curl_easy_init "(3)," curl_easy_cleanup "(3)," curl_global_init "(3)
-.SH BUGS
-Surely there are some, you tell me!
+