Yang Tse
2c16681225
Adjusted to take in account that...
...
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
2009-06-10 02:49:42 +00:00
Yang Tse
b8e73495a5
Extend displaying of logfiles upon first server start-up failure for http, https, ftp, ftps and tftp test harness servers.
2009-05-15 11:59:24 +00:00
Yang Tse
187cfc1594
Displaying of logfiles on ftp server satrtup failure for test case #100 becomes standard.
2009-05-15 11:14:03 +00:00
Yang Tse
86f043a66c
temporary debug trace for ftp server satrtup failure on testcase #100
2009-05-12 19:18:54 +00:00
Yang Tse
36b397be9f
Fetch curl's 'CharConv' feature information, used by TPF.
2009-05-11 17:20:41 +00:00
Daniel Stenberg
1f340a262f
support --help to do the same as -h
2009-05-11 11:39:42 +00:00
Yang Tse
75585f771a
Fix name of tool shown upon error.
2009-05-11 01:16:28 +00:00
Daniel Stenberg
d1ba4324de
introduce VCURL for verify calls, so that it can be changed to use a different
...
binary than the one that gets tested, if need be
2009-05-10 21:20:15 +00:00
Yang Tse
9ef7b6afe2
Remove temporary and HP-UX autobuild specific change to debug SSH server start-up failures
2009-05-08 02:18:49 +00:00
Yang Tse
7c6e0d5981
Temporary and HP-UX autobuild specific change to debug SSH server start-up failures
2009-05-06 10:32:06 +00:00
Yang Tse
a840cc700a
Revert change committed on Mon May 4 09:30:23 2009 UTC.
...
The origin of the problem with test case #251 was the --ftp-port not being the CLIENTIP address.
2009-05-05 08:46:31 +00:00
Yang Tse
ff3e574187
David McCreedy's patch to fix test suite harness to allow test FTP server and client on different machines, providing FTP client address when running the FTP test server.
2009-05-04 10:30:23 +00:00
Yang Tse
8aa88f4d36
re-enable all tests for all icc autobuilds
2009-04-17 07:30:56 +00:00
Daniel Stenberg
4741e64c89
Josef Wolf's extension that allows a $TESTDIR/gdbinit$testnum file that when
...
you use runtests.pl -g, will be sourced by gdb to allow additional fancy
or whatever you see fit
2008-11-19 21:56:11 +00:00
Dan Fandrich
cdd6054e08
Display the time in verbose mode during the torture tests to help determine
...
when the tests stall.
2008-11-17 20:24:13 +00:00
Yang Tse
9230708e47
don't skip tests 558 and 559 on i686 icc autobuilds
2008-10-27 20:09:35 +00:00
Yang Tse
6db8f53445
test #558 verifies loop operation using malloc() and free()
2008-10-26 03:03:29 +00:00
Yang Tse
81e48ada47
For i686 icc autobuilds:
...
Re-enable all tests for debug-enabled builds.
For debug-disabled builds only 8 tests are enabled.
2008-10-22 15:03:15 +00:00
Dan Fandrich
357383159e
A <precheck> command is considered to have failed if it returns a non-zero
...
return code. This way, if the precheck command can't be run at all for
whatever reason, it's treated as a precheck failure which causes the
test to be skipped.
2008-10-15 17:41:02 +00:00
Yang Tse
a632f6d5b1
if a test execution is aborted due to a signal, and the process
...
returns no other exitcode, use 2000 + signal number as return code
2008-09-26 18:56:56 +00:00
Yang Tse
42271ad463
use shift right. Division result is not integral.
2008-09-26 14:08:33 +00:00
Yang Tse
82107a02f5
Re-enable test #100 on i686 icc autobuilds
2008-09-24 01:29:23 +00:00
Yang Tse
1e076a4ae0
Re-enable tests #1 on i686 icc autobuilds
2008-09-22 18:55:42 +00:00
Yang Tse
eae27d1788
Disable all tests on i686 icc autobuilds to inspect build messages
2008-09-08 16:50:04 +00:00
Yang Tse
d744c85310
Re-enable all tests on x86_64 and ia64.
2008-08-24 23:26:07 +00:00
Yang Tse
71d3c5bf41
Disable all tests except #557 on x86_64 and ia64 to debug trace curl_mprintf() on these systems.
2008-08-24 15:57:52 +00:00
Daniel Stenberg
a604682805
Andy Tsouladze's fix to kill the knowledge of servers properly after they have
...
been killed.
2008-08-23 11:25:14 +00:00
Daniel Stenberg
14a5596346
- Andy Tsouladze fixed runtests.pl to not attempt to execute the stunnel
...
_directory_ if that happened to appear in the path!
2008-08-12 07:21:39 +00:00
Dan Fandrich
b6b03c8ab9
Added feature in runtests.pl to select tests based on key word.
2008-07-27 02:34:27 +00:00
Dan Fandrich
932b589780
Changed the long logfile elision code in runtests.pl to properly handle
...
lines ending in \r.
2008-07-24 02:16:48 +00:00
Dan Fandrich
70d834c512
Always use $LOGDIR when referring to the log directory.
2008-06-19 01:12:02 +00:00
Daniel Stenberg
2d0fea2650
fixed the language somewhat
2008-06-13 20:45:34 +00:00
Daniel Stenberg
5abfdc0140
- curl the tool now deals with its command line options somewhat differently!
...
All boolean options (such as -O, -I, -v etc), both short and long versions,
now always switch on/enable the option named. Using the same option multiple
times thus make no difference. To switch off one of those options, you need
to use the long version of the option and type --no-OPTION. Like to disable
verbose mode you use --no-verbose!
- Added --remote-name-all to curl, which if used changes the default for all
given URLs to be dealt with as if -O is used. So if you want to disable that
for a specific URL after --remote-name-all has been used, you muse use -o -
or --no-remote-name.
2008-06-08 20:53:49 +00:00
Daniel Stenberg
7b2531da24
do variable replacement in the stdout data read from the test case
2008-05-01 10:51:16 +00:00
Yang Tse
113d0937de
Add 'timeout' and 'delay' attributes support for the test harness <command> subsection
2008-04-25 04:19:50 +00:00
Yang Tse
96edebf4d9
improve synchronization between test harness runtests.pl script
...
and test harness servers to minimize risk of false test failures.
http://curl.haxx.se/mail/lib-2008-04/0392.html
2008-04-23 23:55:34 +00:00
Dan Fandrich
768e3e796e
Ignore the result of the postcheck command in torture mode
2008-04-21 17:19:44 +00:00
Dan Fandrich
80cec5a62a
Fixed the test harness so it will write out zero-length data files.
2008-03-06 01:11:43 +00:00
Daniel Stenberg
2c80bcbc81
made the non-matching error code output nicer since we know it is a number
...
and the string contains a newline...
2008-02-20 12:14:31 +00:00
Yang Tse
cf9259dd92
verifyserver() actually returns the pid of the unsecure http and ftp servers
...
when verifying the https and ftps servers
2008-02-13 06:06:57 +00:00
Yang Tse
6634e3c3a3
On heavily loaded systems any test server start up can take longer than the
...
timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.
To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.
2008-02-12 13:47:56 +00:00
Dan Fandrich
75c369dcca
Disable test due to keyword before disabling due to bad server.
2008-02-11 20:10:36 +00:00
Yang Tse
6942d313ff
Verify only once test harness sftp server connectivity and functionality.
...
Make sure that the sftp client tool uses the ssh client binary that we have
used to generate the configuration files, otherwise sftp might be using one
located in the preferred path compiled into sftp.
2008-02-10 02:52:17 +00:00
Yang Tse
1a340de0e5
To verify that the sftp server is actually running, responsive and that
...
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.
The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
2008-02-08 13:54:02 +00:00
Yang Tse
01d95b56a0
fix failure to properly detect SSH and SOCKS servers start up on loaded systems
2008-01-18 09:18:59 +00:00
Daniel Stenberg
6893fcaa9b
remove trailing comma too, even though I don't think it does any harm
2008-01-16 22:09:51 +00:00
Daniel Stenberg
301ae1ae1b
Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring
...
out what valgrind to run.
2008-01-16 22:08:37 +00:00
Yang Tse
69f685056d
startnew() shouldn't return a positive pid as reported in the pidfile
...
by the spawned server itself unless it is actually alive
2008-01-14 19:28:54 +00:00
Yang Tse
2b63eb8511
Ooops
2008-01-12 00:12:16 +00:00
Yang Tse
f09fe4b49f
Ooops
2008-01-11 21:59:05 +00:00
