Steve Holme
785d76d681
transfer: Fixed existing scratch buffer being checked for NULL twice
...
If the scratch buffer already existed when the CRLF conversion was
performed then the buffer pointer would be checked twice for NULL. This
second check is only necessary if the call to malloc() was performed by
the first check.
2014-11-30 15:06:13 +00:00
Steve Holme
9afd97022e
smtp: Fixed dot stuffing being performed when no new data read
...
Whilst I had moved the dot stuffing code from being performed before
CRLF conversion takes place to after it, in commit 4bd860a001
, I had
moved it outside the 'when something read' block of code when meant
it could perform the dot stuffing twice on partial send if nread
happened to contain the right values. It also meant the function could
potentially read past the end of buffer. This was highlighted by the
following warning:
warning: `nread' might be used uninitialized in this function
2014-11-30 14:24:35 +00:00
Daniel Stenberg
5409f32984
smb.h: fixed picky compiler warning
...
smb.h:30:16: error: comma at end of enumerator list [-Werror=pedantic]
2014-11-29 23:06:04 +01:00
Steve Holme
733686e430
tests: Disable test 1013 until SMB is fully added
2014-11-29 21:36:20 +00:00
Bill Nagel
557658776f
smb: Added SMB protocol and port definitions
...
Added the necessary protocol and port definitions in order to support
SMB/CIFS.
2014-11-29 21:26:40 +00:00
Bill Nagel
0627c48dde
smb: Added internal SMB definitions and structures
...
Added the internal definitions and structures necessary for SMB/CIFS
support.
2014-11-29 20:32:34 +00:00
Bill Nagel
7c00ba10da
smb: Added SMB connection structure
...
Added the connection structure that will be required in urldata.h for
SMB/CIFS based connections.
2014-11-29 20:16:51 +00:00
Bill Nagel
e80d9d5902
smb: Added initial source files for SMB
...
Added the initial source files and updated the relevant project files in
order to support SMB/CIFS.
2014-11-29 18:10:41 +00:00
Bill Nagel
3529903afb
smb: Added configuration options for SMB
...
Added --enable-smb and --disable-smb configuration options for the
upcoming SMB/CIFS protocol support.
2014-11-29 18:10:38 +00:00
Peter Wu
86981ac9f5
runtests.pl: fix startup of IPv6 servers
...
Commit curl-7_23_1-143-g8218064 changed the parameter of
responsive_http_server to accept types other than IPv6 (converting
from a boolean to a string), but only considered the lower-case "ipv6"
and not the "IPv6" variant. This caused all servers to start in IPv4
mode instead.
This patch converts the remaining cases to "ipv6". While not strictly
necessary for the run*server variants, these got also converted for
consistency and to prevent future errors.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-28 23:49:10 +01:00
Peter Wu
bb6047cd64
runtests.pl: fix warning message, remove duplicate value
...
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-28 23:49:10 +01:00
Steve Holme
93e080cbaa
http.c: Fixed compilation warnings from features being disabled
...
warning: unused variable 'data'
warning: variable 'addcookies' set but not used
...and some very minor coding style policing.
2014-11-27 22:29:31 +00:00
Steve Holme
72703aa9f3
RELEASE-NOTES: Synced with c5399c827d
2014-11-27 21:03:20 +00:00
Steve Holme
c5399c827d
tests: Added SMTP with --crlf test case
2014-11-26 23:58:42 +00:00
Steve Holme
982a649aa5
docs: Updated for commit 4bd860a001
and SMTP Unix line ending conversion
2014-11-26 23:32:38 +00:00
Steve Holme
854049f962
smtp: Fixed const'ness of nread parameter in Curl_smtp_escape_eob()
...
...and some comment typos!
2014-11-26 23:31:57 +00:00
Steve Holme
4bd860a001
smtp: Added support for the conversion of Unix newlines during mail send
...
Added support for the automatic conversion of Unix newlines to CRLF
during mail uploads.
Feature: http://curl.haxx.se/bug/view.cgi?id=1456
2014-11-26 23:31:54 +00:00
Steve Holme
aa3e8dd3da
CURLOPT_CRLF.3: Fixed inclusion of SMTP in listed protocols
2014-11-25 23:23:42 +00:00
Daniel Stenberg
0beda1a388
curl*3: added small examples
...
and some minor edits
2014-11-25 14:25:02 +01:00
Daniel Stenberg
7eb7f7c32d
libcurl.3: fix formatting
...
refer to functions with the man page section properly
2014-11-25 11:56:43 +01:00
Daniel Stenberg
b486d1ce05
man pages: SEE ALSO curl_multi_wait
2014-11-25 11:48:56 +01:00
Daniel Stenberg
29aa9a37cc
curl_multi_wait.3: clarify numfds being used if not NULL
2014-11-25 11:48:38 +01:00
Daniel Stenberg
bc860548c2
multi-single.c: switch to use curl_multi_wait
...
Makes the example much easier and straight-forward!
2014-11-25 11:45:38 +01:00
Daniel Stenberg
9cfa822fea
testcurl: bump the version of this script!
2014-11-25 11:22:09 +01:00
Daniel Stenberg
c1e8744177
testcurl: skip reading the setup file if given enough cmdline info
...
This makes it much easier to run multiple tests in the same directory,
just altering the command lines used.
2014-11-25 10:36:47 +01:00
Daniel Stenberg
700843d69f
select.c: fix compilation for VxWorks
...
Reported-by: Brian
Bug: http://curl.haxx.se/bug/view.cgi?id=1455
2014-11-25 08:55:17 +01:00
moparisthebest
be1a505189
SSL: Add PEM format support for public key pinning
2014-11-24 19:30:09 +01:00
Kamil Dudka
2008c92513
Revert "repository: ignore patch files generated by git"
...
This reverts commit 217024a687
.
Bug: https://github.com/bagder/curl/commit/217024a6#commitcomment-8693738
2014-11-24 15:03:16 +01:00
Steve Holme
53e2e4c721
multi.c: Fixed compilation warnings when no verbose string support
...
warning: variable 'connection_id' set but not used
warning: unused parameter 'lineno'
2014-11-23 19:51:24 +00:00
Steve Holme
dcc01123f2
RELEASE-NOTES: Synced with 1450712e76
2014-11-23 17:22:22 +00:00
Steve Holme
1450712e76
sasl: Tidied up some parameter comments
2014-11-23 16:50:15 +00:00
Steve Holme
bfdef6301c
sasl: Reduced the need for two sets of NTLM functions
2014-11-23 16:45:30 +00:00
Steve Holme
33be9e29be
ntlm: Moved NSS initialisation to base decode function
2014-11-23 16:07:59 +00:00
Steve Holme
8ed2420dbb
http_ntlm: Fixed additional NSS initialisation call when decoding type-2
...
After commit 48d19acb7c
the HTTP code would call Curl_nss_force_init()
twice when decoding a NTLM type-2 message, once directly and the other
through the call to Curl_sasl_decode_ntlm_type2_message().
2014-11-23 16:05:08 +00:00
Steve Holme
409265a571
ntlm: Fixed static'ness of local decode function
2014-11-23 10:38:54 +00:00
Steve Holme
885119bf50
ntlm: Corrected some parameter names and comments
2014-11-23 10:38:35 +00:00
Steve Holme
85070e46cc
runtests.pl: Re-aligned feature support comments
2014-11-22 23:17:59 +00:00
Steve Holme
9ce5e89fcc
runtests.pl: Use Kerberos and SPNEGO as proxies for the crypto feature
...
In addition to NTLM, use Kerberos and SPNEGO as proxies to the crypto
feature.
...and converted tab characters, from commit 4b4e8a5853
, to spaces.
2014-11-22 17:14:11 +00:00
Steve Holme
2e2f981bcc
runtests.pl: Added support for SPNEGO
2014-11-22 13:52:57 +00:00
Steve Holme
8cc7e74a8f
runtests.pl: Added Kerberos detection
2014-11-22 12:26:59 +00:00
Steve Holme
5b437c7637
runtests.pl: Added GSS-API detection
2014-11-22 12:12:42 +00:00
Steve Holme
84d752d1ad
FILEFORMAT: Added SSPI, GSS-API and Kerberos to the features list
2014-11-21 18:44:58 +00:00
Steve Holme
10cbc33a4c
FILEFORMAT: Added test requires feature not present information
...
Such as !SSPI as we do for the NTLM and Digest tests.
2014-11-21 18:42:40 +00:00
Daniel Stenberg
d62706ec6d
http.c: log if it notices HTTP 1.1 after a upgrade to http2
2014-11-20 23:33:34 +01:00
Daniel Stenberg
4c3cfc7558
test1801: first real http2 test case
2014-11-20 23:33:34 +01:00
Daniel Stenberg
ac5eb7fdfb
sws: initial tiny steps toward http2 support
2014-11-20 23:33:34 +01:00
Daniel Stenberg
52655b4c90
FILEFORMAT: mention the new upgrade support
2014-11-20 23:33:34 +01:00
Daniel Stenberg
07e0957e1f
test1800: first plain-text http2 test case
...
Verifies the upgrade request, but gets a plain 1.1 response
2014-11-20 23:33:34 +01:00
Tatsuhiro Tsujikawa
7d1f2ac769
http: Disable pipelining for HTTP/2 and upgraded connections
...
This commit disables pipelining for HTTP/2 or upgraded connections. For
HTTP/2, we do not support multiplexing. In general, requests cannot be
pipelined in an upgraded connection, since it is now different protocol.
2014-11-20 14:41:17 +01:00
Brad Harder
416cd9ac11
CURLOPT_POSTFIELDS.3: mention the COPYPOSTFIELDS option
2014-11-20 10:27:09 +01:00