curl/lib/curl_sasl.c

639 lines
20 KiB
C
Raw Normal View History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 2012 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* RFC2195 CRAM-MD5 authentication
* RFC2831 DIGEST-MD5 authentication
* RFC4422 Simple Authentication and Security Layer (SASL)
* RFC4616 PLAIN authentication
* RFC6749 OAuth 2.0 Authorization Framework
* Draft LOGIN SASL Mechanism <draft-murchison-sasl-login-00.txt>
*
***************************************************************************/
build: fix circular header inclusion with other packages This commit renames lib/setup.h to lib/curl_setup.h and renames lib/setup_once.h to lib/curl_setup_once.h. Removes the need and usage of a header inclusion guard foreign to libcurl. [1] Removes the need and presence of an alarming notice we carried in old setup_once.h [2] ---------------------------------------- 1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H, this single inclusion guard is enough to ensure that inclusion of lib/setup_once.h done from lib/setup.h is only done once. Additionally lib/setup.h has always used __SETUP_ONCE_H macro to protect inclusion of setup_once.h even after commit ec691ca3, this was to avoid a circular header inclusion triggered when building a c-ares enabled version with c-ares sources available which also has a setup_once.h header. Commit ec691ca3 exposes the real nature of __SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard foreign to libcurl belonging to c-ares's setup_once.h The renaming this commit does, fixes the circular header inclusion, and as such removes the need and usage of a header inclusion guard foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl. 2 - Due to the circular interdependency of old lib/setup_once.h and the c-ares setup_once.h header, old file lib/setup_once.h has carried back from 2006 up to now days an alarming and prominent notice about the need of keeping libcurl's and c-ares's setup_once.h in sync. Given that this commit fixes the circular interdependency, the need and presence of mentioned notice is removed. All mentioned interdependencies come back from now old days when the c-ares project lived inside a curl subdirectory. This commit removes last traces of such fact.
2013-01-06 19:06:49 +01:00
#include "curl_setup.h"
#include <curl/curl.h>
#include "urldata.h"
#include "curl_base64.h"
#include "curl_md5.h"
2013-12-17 23:32:47 +01:00
#include "vtls/vtls.h"
#include "curl_hmac.h"
#include "curl_ntlm_msgs.h"
#include "curl_sasl.h"
#include "warnless.h"
#include "curl_memory.h"
#ifdef USE_NSS
#include "vtls/nssg.h" /* for Curl_nss_force_init() */
#endif
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
/* The last #include file should be: */
#include "memdebug.h"
#if !defined(CURL_DISABLE_CRYPTO_AUTH) && !defined(USE_WINDOWS_SSPI)
/* Retrieves the value for a corresponding key from the challenge string
* returns TRUE if the key could be found, FALSE if it does not exists
*/
static bool sasl_digest_get_key_value(const char *chlg,
const char *key,
char *value,
size_t max_val_len,
char end_char)
{
char *find_pos;
size_t i;
find_pos = strstr(chlg, key);
if(!find_pos)
return FALSE;
find_pos += strlen(key);
for(i = 0; *find_pos && *find_pos != end_char && i < max_val_len - 1; ++i)
value[i] = *find_pos++;
value[i] = '\0';
return TRUE;
}
#endif
/*
* Curl_sasl_create_plain_message()
*
* This is used to generate an already encoded PLAIN message ready
* for sending to the recipient.
*
* Parameters:
*
* data [in] - The session handle.
* userp [in] - The user name.
* passdwp [in] - The user's password.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_create_plain_message(struct SessionHandle *data,
const char *userp,
const char *passwdp,
char **outptr, size_t *outlen)
{
CURLcode result;
char *plainauth;
size_t ulen;
size_t plen;
ulen = strlen(userp);
plen = strlen(passwdp);
plainauth = malloc(2 * ulen + plen + 2);
if(!plainauth) {
*outlen = 0;
*outptr = NULL;
return CURLE_OUT_OF_MEMORY;
}
/* Calculate the reply */
memcpy(plainauth, userp, ulen);
plainauth[ulen] = '\0';
memcpy(plainauth + ulen + 1, userp, ulen);
plainauth[2 * ulen + 1] = '\0';
memcpy(plainauth + 2 * ulen + 2, passwdp, plen);
/* Base64 encode the reply */
result = Curl_base64_encode(data, plainauth, 2 * ulen + plen + 2, outptr,
outlen);
Curl_safefree(plainauth);
return result;
}
/*
* Curl_sasl_create_login_message()
*
* This is used to generate an already encoded LOGIN message containing the
* user name or password ready for sending to the recipient.
*
* Parameters:
*
* data [in] - The session handle.
* valuep [in] - The user name or user's password.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_create_login_message(struct SessionHandle *data,
const char *valuep, char **outptr,
size_t *outlen)
{
size_t vlen = strlen(valuep);
if(!vlen) {
/* Calculate an empty reply */
*outptr = strdup("=");
if(*outptr) {
*outlen = (size_t) 1;
return CURLE_OK;
}
*outlen = 0;
return CURLE_OUT_OF_MEMORY;
}
/* Base64 encode the value */
return Curl_base64_encode(data, valuep, vlen, outptr, outlen);
}
#ifndef CURL_DISABLE_CRYPTO_AUTH
/*
* Curl_sasl_decode_cram_md5_message()
*
* This is used to decode an already encoded CRAM-MD5 challenge message.
*
* Parameters:
*
* chlg64 [in] - Pointer to the base64 encoded challenge message.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_decode_cram_md5_message(const char *chlg64, char **outptr,
size_t *outlen)
{
CURLcode result = CURLE_OK;
size_t chlg64len = strlen(chlg64);
*outptr = NULL;
*outlen = 0;
/* Decode the challenge if necessary */
if(chlg64len && *chlg64 != '=')
result = Curl_base64_decode(chlg64, (unsigned char **) outptr, outlen);
return result;
}
/*
* Curl_sasl_create_cram_md5_message()
*
* This is used to generate an already encoded CRAM-MD5 response message ready
* for sending to the recipient.
*
* Parameters:
*
* data [in] - The session handle.
* chlg [in] - The challenge.
* userp [in] - The user name.
* passdwp [in] - The user's password.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_create_cram_md5_message(struct SessionHandle *data,
const char *chlg,
const char *userp,
const char *passwdp,
char **outptr, size_t *outlen)
{
CURLcode result = CURLE_OK;
size_t chlglen = 0;
HMAC_context *ctxt;
unsigned char digest[MD5_DIGEST_LEN];
char *response;
if(chlg)
chlglen = strlen(chlg);
/* Compute the digest using the password as the key */
ctxt = Curl_HMAC_init(Curl_HMAC_MD5,
(const unsigned char *) passwdp,
curlx_uztoui(strlen(passwdp)));
if(!ctxt)
return CURLE_OUT_OF_MEMORY;
/* Update the digest with the given challenge */
if(chlglen > 0)
Curl_HMAC_update(ctxt, (const unsigned char *) chlg,
curlx_uztoui(chlglen));
/* Finalise the digest */
Curl_HMAC_final(ctxt, digest);
/* Generate the response */
response = aprintf(
"%s %02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x",
userp, digest[0], digest[1], digest[2], digest[3], digest[4],
digest[5], digest[6], digest[7], digest[8], digest[9], digest[10],
digest[11], digest[12], digest[13], digest[14], digest[15]);
if(!response)
return CURLE_OUT_OF_MEMORY;
/* Base64 encode the response */
result = Curl_base64_encode(data, response, 0, outptr, outlen);
Curl_safefree(response);
return result;
}
#ifndef USE_WINDOWS_SSPI
/*
* sasl_decode_digest_md5_message()
*
* This is used internally to decode an already encoded DIGEST-MD5 challenge
* message into the seperate attributes.
*
* Parameters:
*
* chlg64 [in] - Pointer to the base64 encoded challenge message.
* nonce [in/out] - The buffer where the nonce will be stored.
* nlen [in] - The length of the nonce buffer.
* realm [in/out] - The buffer where the realm will be stored.
* rlen [in] - The length of the realm buffer.
* alg [in/out] - The buffer where the algorithm will be stored.
* alen [in] - The length of the algorithm buffer.
*
* Returns CURLE_OK on success.
*/
static CURLcode sasl_decode_digest_md5_message(const char *chlg64,
char *nonce, size_t nlen,
char *realm, size_t rlen,
char *alg, size_t alen)
{
CURLcode result = CURLE_OK;
unsigned char *chlg = NULL;
size_t chlglen = 0;
size_t chlg64len = strlen(chlg64);
/* Decode the base-64 encoded challenge message */
if(chlg64len && *chlg64 != '=') {
result = Curl_base64_decode(chlg64, &chlg, &chlglen);
if(result)
return result;
}
/* Ensure we have a valid challenge message */
if(!chlg)
return CURLE_BAD_CONTENT_ENCODING;
/* Retrieve nonce string from the challenge */
if(!sasl_digest_get_key_value((char *)chlg, "nonce=\"", nonce, nlen, '\"')) {
Curl_safefree(chlg);
return CURLE_BAD_CONTENT_ENCODING;
}
/* Retrieve realm string from the challenge */
if(!sasl_digest_get_key_value((char *)chlg, "realm=\"", realm, rlen, '\"')) {
/* Challenge does not have a realm, set empty string [RFC2831] page 6 */
strcpy(realm, "");
}
/* Retrieve algorithm string from the challenge */
if(!sasl_digest_get_key_value((char *)chlg, "algorithm=", alg, alen, ',')) {
Curl_safefree(chlg);
return CURLE_BAD_CONTENT_ENCODING;
}
Curl_safefree(chlg);
return CURLE_OK;
}
/*
* Curl_sasl_create_digest_md5_message()
*
* This is used to generate an already encoded DIGEST-MD5 response message
* ready for sending to the recipient.
*
* Parameters:
*
* data [in] - The session handle.
* chlg64 [in] - Pointer to the base64 encoded challenge message.
* userp [in] - The user name.
* passdwp [in] - The user's password.
* service [in] - The service type such as www, smtp, pop or imap.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_create_digest_md5_message(struct SessionHandle *data,
const char *chlg64,
const char *userp,
const char *passwdp,
const char *service,
char **outptr, size_t *outlen)
{
#ifndef DEBUGBUILD
static const char table16[] = "0123456789abcdef";
#endif
CURLcode result = CURLE_OK;
size_t i;
MD5_context *ctxt;
char *response = NULL;
unsigned char digest[MD5_DIGEST_LEN];
char HA1_hex[2 * MD5_DIGEST_LEN + 1];
char HA2_hex[2 * MD5_DIGEST_LEN + 1];
char resp_hash_hex[2 * MD5_DIGEST_LEN + 1];
char nonce[64];
char realm[128];
char algorithm[64];
char nonceCount[] = "00000001";
char cnonce[] = "12345678"; /* will be changed */
char method[] = "AUTHENTICATE";
char qop[] = "auth";
char uri[128];
/* Decode the challange message */
result = sasl_decode_digest_md5_message(chlg64, nonce, sizeof(nonce),
realm, sizeof(realm),
algorithm, sizeof(algorithm));
if(result)
return result;
/* We only support md5 sessions */
if(strcmp(algorithm, "md5-sess") != 0)
return CURLE_BAD_CONTENT_ENCODING;
#ifndef DEBUGBUILD
/* Generate 64 bits of random data */
for(i = 0; i < 8; i++)
cnonce[i] = table16[Curl_rand(data)%16];
#endif
/* So far so good, now calculate A1 and H(A1) according to RFC 2831 */
ctxt = Curl_MD5_init(Curl_DIGEST_MD5);
if(!ctxt)
return CURLE_OUT_OF_MEMORY;
Curl_MD5_update(ctxt, (const unsigned char *) userp,
curlx_uztoui(strlen(userp)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) realm,
curlx_uztoui(strlen(realm)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) passwdp,
curlx_uztoui(strlen(passwdp)));
Curl_MD5_final(ctxt, digest);
ctxt = Curl_MD5_init(Curl_DIGEST_MD5);
if(!ctxt)
return CURLE_OUT_OF_MEMORY;
Curl_MD5_update(ctxt, (const unsigned char *) digest, MD5_DIGEST_LEN);
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) nonce,
curlx_uztoui(strlen(nonce)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) cnonce,
curlx_uztoui(strlen(cnonce)));
Curl_MD5_final(ctxt, digest);
/* Convert calculated 16 octet hex into 32 bytes string */
for(i = 0; i < MD5_DIGEST_LEN; i++)
snprintf(&HA1_hex[2 * i], 3, "%02x", digest[i]);
/* Prepare the URL string */
snprintf(uri, sizeof(uri), "%s/%s", service, realm);
/* Calculate H(A2) */
ctxt = Curl_MD5_init(Curl_DIGEST_MD5);
if(!ctxt)
return CURLE_OUT_OF_MEMORY;
Curl_MD5_update(ctxt, (const unsigned char *) method,
curlx_uztoui(strlen(method)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) uri,
curlx_uztoui(strlen(uri)));
Curl_MD5_final(ctxt, digest);
for(i = 0; i < MD5_DIGEST_LEN; i++)
snprintf(&HA2_hex[2 * i], 3, "%02x", digest[i]);
/* Now calculate the response hash */
ctxt = Curl_MD5_init(Curl_DIGEST_MD5);
if(!ctxt)
return CURLE_OUT_OF_MEMORY;
Curl_MD5_update(ctxt, (const unsigned char *) HA1_hex, 2 * MD5_DIGEST_LEN);
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) nonce,
curlx_uztoui(strlen(nonce)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) nonceCount,
curlx_uztoui(strlen(nonceCount)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) cnonce,
curlx_uztoui(strlen(cnonce)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) qop,
curlx_uztoui(strlen(qop)));
Curl_MD5_update(ctxt, (const unsigned char *) ":", 1);
Curl_MD5_update(ctxt, (const unsigned char *) HA2_hex, 2 * MD5_DIGEST_LEN);
Curl_MD5_final(ctxt, digest);
for(i = 0; i < MD5_DIGEST_LEN; i++)
snprintf(&resp_hash_hex[2 * i], 3, "%02x", digest[i]);
/* Generate the response */
response = aprintf("username=\"%s\",realm=\"%s\",nonce=\"%s\","
"cnonce=\"%s\",nc=\"%s\",digest-uri=\"%s\",response=%s",
userp, realm, nonce,
cnonce, nonceCount, uri, resp_hash_hex);
if(!response)
return CURLE_OUT_OF_MEMORY;
/* Base64 encode the response */
result = Curl_base64_encode(data, response, 0, outptr, outlen);
Curl_safefree(response);
return result;
}
#endif /* USE_WINDOWS_SSPI */
#endif /* CURL_DISABLE_CRYPTO_AUTH */
#ifdef USE_NTLM
/*
* Curl_sasl_create_ntlm_type1_message()
*
* This is used to generate an already encoded NTLM type-1 message ready for
* sending to the recipient.
*
* Note: This is a simple wrapper of the NTLM function which means that any
* SASL based protocols don't have to include the NTLM functions directly.
*
* Parameters:
*
* userp [in] - The user name in the format User or Domain\User.
* passdwp [in] - The user's password.
* ntlm [in/out] - The ntlm data struct being used and modified.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_create_ntlm_type1_message(const char *userp,
const char *passwdp,
struct ntlmdata *ntlm,
char **outptr, size_t *outlen)
{
return Curl_ntlm_create_type1_message(userp, passwdp, ntlm, outptr, outlen);
}
/*
* Curl_sasl_decode_ntlm_type2_message()
*
* This is used to decode an already encoded NTLM type-2 message.
*
* Parameters:
*
* data [in] - Pointer to session handle.
* type2msg [in] - Pointer to the base64 encoded type-2 message.
* ntlm [in/out] - The ntlm data struct being used and modified.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_decode_ntlm_type2_message(struct SessionHandle *data,
const char *type2msg,
struct ntlmdata *ntlm)
{
#ifdef USE_NSS
CURLcode result;
/* make sure the crypto backend is initialized */
result = Curl_nss_force_init(data);
if(result)
return result;
#endif
return Curl_ntlm_decode_type2_message(data, type2msg, ntlm);
}
/*
* Curl_sasl_create_ntlm_type3_message()
*
* This is used to generate an already encoded NTLM type-3 message ready for
* sending to the recipient.
*
* Parameters:
*
* data [in] - Pointer to session handle.
* userp [in] - The user name in the format User or Domain\User.
* passdwp [in] - The user's password.
* ntlm [in/out] - The ntlm data struct being used and modified.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_create_ntlm_type3_message(struct SessionHandle *data,
const char *userp,
const char *passwdp,
struct ntlmdata *ntlm,
char **outptr, size_t *outlen)
{
return Curl_ntlm_create_type3_message(data, userp, passwdp, ntlm, outptr,
outlen);
}
#endif /* USE_NTLM */
/*
* Curl_sasl_create_xoauth2_message()
*
* This is used to generate an already encoded OAuth 2.0 message ready for
* sending to the recipient.
*
* Parameters:
*
* data [in] - The session handle.
* user [in] - The user name.
* bearer [in] - The bearer token.
* outptr [in/out] - The address where a pointer to newly allocated memory
* holding the result will be stored upon completion.
* outlen [out] - The length of the output message.
*
* Returns CURLE_OK on success.
*/
CURLcode Curl_sasl_create_xoauth2_message(struct SessionHandle *data,
const char *user,
const char *bearer,
char **outptr, size_t *outlen)
{
CURLcode result = CURLE_OK;
char *xoauth = NULL;
/* Generate the message */
xoauth = aprintf("user=%s\1auth=Bearer %s\1\1", user, bearer);
if(!xoauth)
return CURLE_OUT_OF_MEMORY;
/* Base64 encode the reply */
result = Curl_base64_encode(data, xoauth, strlen(xoauth), outptr, outlen);
Curl_safefree(xoauth);
return result;
}
/*
* Curl_sasl_cleanup()
*
* This is used to cleanup any libraries or curl modules used by the sasl
* functions.
*
* Parameters:
*
* conn [in] - Pointer to the connection data.
* authused [in] - The authentication mechanism used.
*/
void Curl_sasl_cleanup(struct connectdata *conn, unsigned int authused)
{
#ifdef USE_NTLM
/* Cleanup the ntlm structure */
if(authused == SASL_MECH_NTLM) {
Curl_ntlm_sspi_cleanup(&conn->ntlm);
}
(void)conn;
#else
/* Reserved for future use */
(void)conn;
(void)authused;
#endif
}