The END macro was put too far down which made the linker complain about
it. Move up to the end of the code.
Change-Id: Ica71a9c6083b437d2213c7cefe34b0083c78f16b
Marking segments read-only was pushing the alignment of __on_dlclose by
2 bytes making it unaligned. This change makes sure the ARM code is
aligned to the 4 byte boundary.
Bug: 6313309
Change-Id: Ic2bf475e120dd61225ec19e5d8a9a8b1d0b7f081
This reverts commit 61ff83475c.
This code is harmless, and only applies to the linker, so
there's no harm in keeping it in the tree a little bit longer.
Let's roll this back while we try to figure out the root cause
of bug 6314858.
Bug: 6314858
Change-Id: I9f5ed81d23a7abe273baf792aa8a0a2839ef094c
This reverts commit 61ff83475c.
This code is harmless, and only applies to the linker, so
there's no harm in keeping it in the tree a little bit longer.
Let's roll this back while we try to figure out the root cause
of bug 6314858.
Bug: 6314858
Change-Id: I9f5ed81d23a7abe273baf792aa8a0a2839ef094c
This change fixes a segmentation fault in the libc unwinder when it goes
past __libc_init.
Unwind instructions for __libc_init direct it to grab the return address from
the stack frame. Without this change, the unwinder gets a wild address and
looks up further unwind instructions for the routine at that address. If it's
unlucky enough to hit an existing function, it will try to unwind it. Bad
things happen then.
With this change, the return address always points to the _start function,
which does not have unwind instructions associated with it. This stop the
unwind process.
__libc_init never returns, so this does not affect program execution, other
than adding 4 bytes on the main thread stack.
Change-Id: Id58612172e8825c8729cccd081541a13bff96bd0
Currently we will get the wrong result as follows:
remquof(0x7bb33336, 0x63000000) = -671088640, 0x00000000
remquo(0xbff0000000000003, 0x3ff0000000000003) = 1, 0x8000000000000000
remquo(0x9120000000000001, 0x0000000000000005) = -1288490188, 0x0000000000000004
while the correct one should be:
remquof(0x7bb33336, 0x63000000) = 1476395008, 0x00000000
remquo(0xbff0000000000003, 0x3ff0000000000003) = -1, 0x8000000000000000
remquo(0x9120000000000001, 0x0000000000000005) = -1288490189, 0x0000000000000001
Fixed in this patch.
Change-Id: I540b348cd10a539f3b39b1753945c893c4c7ec46
Signed-off-by: Jingwei Zhang <jingwei.zhang@intel.com>
Signed-off-by: Jin Wei <wei.a.jin@intel.com>
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
The ARM static linker wasn't properly handling __exidx_start
and __exidx_end symbols. Now that the static linker has been fixed,
we don't need the dynamic linker to work around this problem.
Change-Id: Ic567122b6c7746cc016795e2befba2c6bd7c0478
From Change I526b5fce: Add NETLINK_IDLETIMER msg type and include the corresponding header file.
Change-Id: I24bffc11394c8664e4d7d7f439b0600545f07536
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Compile the linker with -fvisibility=hidden. This reduces the number
of symbols that show up in the .dynsym section of the linker.
These symbols are never exported to other applications.
In particular, this fixes a problem with setting -DLINKER_DEBUG=1
introduced in 468319ce4f.
Because the symbols "debug_verbosity" and "format_log" have not been
resolved before the linker links itself, any attempt to call
PRINT / INFO / TRACE / WARN / ERROR will result in a segfault.
This change allows the static linker to produce a relative reference
to these symbols rather than relying on relocation.
This also has a nice side effect of making the linker slightly smaller
and slightly more optimized.
The following symbols no longer in the .dynsym section of the linker
after this change:
-addr_to_name
-call_constructors_recursi
-calloc
-debugger_init
-debugger_signal_handler
-debug_verbosity
-dladdr
-dlclose
-dlerror
-dl_lock
-dlopen
-dlsym
-dl_unwind_find_exidx
-find_containing_library
-find_containing_symbol
-find_library
-format_buffer
-free
-libdl_info
-linker_env_get
-linker_env_init
-linker_env_secure
-linker_env_unset
-linker_get_error
-__linker_init
-lookup
-lookup_in_library
-malloc
-notify_gdb_of_libraries
-notify_gdb_of_load
-notify_gdb_of_unload
-realloc
-rtld_db_dlactivity
-unload_library
-vsnprintf
Bug: 5827809
Change-Id: I5e8cd7dcf48c1d6831a970a67f63f24916c5e437
From the release notes:
africa
Summer time changes for Morocco (to start late April 2012)
asia
Changes for 2012 for Gaza & the West Bank (Hebron) and Syria
northamerica
Haiti following US/Canada rules for 2012 (and we're assuming,
for now anyway, for the future).
Also include a change made internally to the 'generate' script as part of
the tzdata2011m update that apparently never made it to AOSP; the original
checkin comment for which was:
Update to tzdata2011m.
Fixes for Europe/Tiraspol (Moldova) and all four Ukrainian zones.
Also show the MD5 of the downloaded data, for comparison against the MD5
given in the announcement mails. (There's a plan to move to proper signing,
but that's not implemented on their end yet.)
(I'm repeating the tzdata change for the convenience of anyone grepping the
log, since the 2012 tzdata releases also contain the 2011m changes; 2011m
is the only missing release I noticed.)
Change-Id: I9a2e530b3a8ea88e3375334a12376e3d8526f267
* commit 'ea76f4147825cc39d9aa91230cd863ed29f28e27':
[MIPS] Clean Kernel headers are generated by running libc/kernel/tools/update_all.py script. This patch ignores any changes to libc/kernel directory not related to MIPS architecture.
* commit 'd509f9ccbba6e1dd53acfd7425bfc06d6b3f8693':
[MIPS] Clean Kernel headers are generated by running libc/kernel/tools/update_all.py script. This patch ignores any changes to libc/kernel directory not related to MIPS architecture.
* commit '09ce7749d74733b28d4fa7a1d36457cb366cc5da':
[MIPS] Clean Kernel headers are generated by running libc/kernel/tools/update_all.py script. This patch ignores any changes to libc/kernel directory not related to MIPS architecture.
libc/kernel/tools/update_all.py script. This patch ignores
any changes to libc/kernel directory not related to MIPS
architecture.
Change-Id: I2c9e461dccb7c33eb4420be2db1a562f45137c8d
Signed-off-by: Raghu Gandham <raghu@mips.com>
Signed-off-by: Chris Dearman <chris@mips.com>
First commit:
Revert "Revert "am be741d47: am 2f460fbe: am 73b5cad9: Merge "bionic: Fix wrong kernel_id in pthread descriptor after fork()"""
This reverts commit 06823da2f0.
Second commit:
bionic: fix atfork hanlder_mutex deadlock
This cherry-picks commit 34e89c232d
After applying the kernel_id fix, the system refused to boot up and we
got following crash log:
I/DEBUG ( 113): pid: 618, tid: 618 >>> org.simalliance.openmobileapi.service:remote <<<
I/DEBUG ( 113): signal 16 (SIGSTKFLT), code -6 (?), fault addr --------
I/DEBUG ( 113): eax fffffe00 ebx b77de994 ecx 00000080 edx 00724002
I/DEBUG ( 113): esi 00000000 edi 00004000
I/DEBUG ( 113): xcs 00000073 xds 0000007b xes 0000007b xfs 00000000 xss 0000007b
I/DEBUG ( 113): eip b7761351 ebp bfdf3de8 esp bfdf3dc4 flags 00000202
I/DEBUG ( 113): #00 eip: 00015351 /system/lib/libc.so
I/DEBUG ( 113): #01 eip: 0000d13c /system/lib/libc.so (pthread_mutex_lock)
I/DEBUG ( 113): #02 eip: 00077b48 /system/lib/libc.so (__bionic_atfork_run_prepare)
I/DEBUG ( 113): #03 eip: 00052cdb /system/lib/libc.so (fork)
I/DEBUG ( 113): #04 eip: 0009ae91 /system/lib/libdvm.so (_Z18dvmOptimizeDexFileillPKcjjb)
I/DEBUG ( 113): #05 eip: 000819d6 /system/lib/libdvm.so (_Z14dvmJarFileOpenPKcS0_PP7JarFileb)
I/DEBUG ( 113): #06 eip: 000b175e /system/lib/libdvm.so (_ZL40Dalvik_dalvik_system_DexFile_openDexFilePKjP6JValue)
I/DEBUG ( 113): #07 eip: 0011fb94 /system/lib/libdvm.so
Root cause:
The atfork uses the mutex handler_mutex to protect the atfork_head. The
parent will call __bionic_atfork_run_prepare() to lock the handler_mutex,
and need both the parent and child to unlock their own copy of handler_mutex
after fork. At that time, the owner of hanlder_mutex is set as the parent.
If we apply the kernel_id fix, then the child's kernel_id will be set as
child's tid.
The handler_mutex is a recursive lock, and pthread_mutex_unlock(&hander_mutex)
will fail because the mutex owner is the parent, while the current tid
(__get_thread()->kernel_id) is child, not matched with the mutex owner.
At that time, the handler_mutex is left in lock state.If the child wants to
fork other process after than, then it will try to lock handler_mutex, and
then be deadlocked.
Fix:
Since the child has its own copy of vm space from the the parent, the
child space's handler_mutex should be reset to the initialized state.
Change-Id: I3907dd9a153418fb78862f2aa6d0302c375d9e27
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Chenyang Du <chenyang.du@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
Change-Id: Ic8072f366a877443a60fe215f3c00b3df5a259c8
This patch fixes an issue where 64-bit hreaders are incorrectly included
in kernel headers. For example, file "libc/kernel/arch-x86/asm/io.h"
incorreclty includes "io_64.h" (missing, BTW) instead of "io_32.h".
The reason is because CONFIG_X86_32 isn't considered pre-defined in
"kernel_default_arch_macros" for x86, and clean_header.py doesn't
look at it at all anyway (ie. __i386__ is also ignored, but it's
okay since x86 cross compiler defines it back)
Fixed 2 tools/*py, README.TXT, and refreshed libc/kernel headers
Change-Id: Iac834cc8b3548f055d3f2a214af36072dd679fe8
Currently Renderscript sample code RsBalls crashed on x86 when SSE2
enabled. The root cause is that the stack was not 16-byte aligned
from the beginning when the processes/threads were created, so the
RsBalls crashed when SSE2 instructions tried to access the variables
on the stack.
- For the thread created by fork():
Its stack alignment is determined by crtbegin_{dynamic, static}.S
- For the thread created by pthread_create():
Its stack alignment is determined by clone.S. __thread_entry( ) is
a standard C function. In order to have its stack be aligned with
16 byte properly, __thread_entry() needs the stack with following
layout when it is called:
layout #1 (correct)
--------------
| |
-------------- <--ESP (ECX - 20)
| ret EIP |
-------------- <--ECX - 16
| arg0 |
-------------- <--ECX - 12
| arg1 |
-------------- <--ECX - 8
| arg2 |
-------------- <--ECX - 4
| unused |
-------------- <--ECX (16-byte boundary)
But it has following layout for now:
layout #2: (incorrect)
--------------
| |
-------------- <--ESP (ECX - 16)
| unused |
-------------- <--ECX - 12
| arg0 |
-------------- <--ECX - 8
| arg1 |
-------------- <--ECX - 4
| arg2 |
-------------- <--ECX (16-byte boundary)
Fixed in this patch.
Change-Id: Ibe01f64db14be14033c505d854c73033556ddaa8
Signed-off-by: Michael Liao <michael.liao@intel.com>
Signed-off-by: H.J. Lu <hongjiu.lu@intel.com>
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
