System calls can be pretty slow. This is mako, which has one of our
lowest latencies:
iterations ns/op
BM_unistd_getpid 10000000 209
BM_unistd_gettid 200000000 8
Bug: 15297299 (kernel panic from too many gettid calls)
Bug: 15315766 (excessive gettid overhead in liblogd)
Change-Id: I49656c0fc5b5d092390264a59e4f2c0d8a8b1aeb
The problem with the original patch was that using syscall(3) means that
errno can be set, but pthread_create(3) was abusing the TLS errno slot as
a pthread_mutex_t for the thread startup handshake.
There was also a mistake in the check for syscall failures --- it should
have checked against -1 instead of 0 (not just because that's the default
idiom, but also here because futex(2) can legitimately return values > 0).
This patch stops abusing the TLS errno slot and adds a pthread_mutex_t to
pthread_internal_t instead. (Note that for LP64 sizeof(pthread_mutex_t) >
sizeof(uintptr_t), so we could potentially clobber other TLS slots too.)
I've also rewritten the LP32 compatibility stubs to directly reuse the
code from the .h file.
This reverts commit 75c55ff84e.
Bug: 15195455
Change-Id: I6ffb13e5cf6a35d8f59f692d94192aae9ab4593d
This reverts commit ced906c849.
Causes issues on art / dalvik due to a broken return value
check and other undiagnosed issues.
bug: 15195455
Change-Id: I5d6bbb389ecefb0e33a5237421a9d56d32a9317c
The unwinder will end up on the parent thread's stack if the return
address register is not cleared.
Bug: 14270816
Bug: 15195760
Change-Id: Iebcdf5cc881cad245643bb193760de35eb7f8b19
Add optimized versions of bcopy and wmemmove for AArch64 based on the
memmove implementation
Change-Id: I82fbe8a7221ce224c567ffcfed7a94a53640fca8
Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
This reverts commit 8167dd7cb9.
For some reason I thought the bcopy change was bzero. The bcopy code doesn't pass our tests, so reverting until I can figure out what's wrong.
Change-Id: Id89fe959ea5105cd58dff6bba8d91a30cc4bcb07
Add optimized versions of bcopy and wmemmove for AArch64 based on the
memmove implementation
Change-Id: Ie43d0ff4f8ec4edba5b4fb5ccacd941f81ac6557
Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
glibc doesn't have tkill or tgkill and says "use syscall(3) instead".
I've left tgkill since it's quite widely used, but there's no reason
to have tkill as well.
Bug: 11156955
Change-Id: Ifc0af750320086f829bc9914551c172b501f3b60
Also hide part of the system properties compatibility code, since
we needed to touch that to keep it building.
I'll remove __futex_syscall4 and futex in a later patch.
Bug: 11156955
Change-Id: Ibbf42414c5bb07fb9f1c4a169922844778e4eeae
This was accidentally added at a time when you couldn't add a constant
to <syscall.h> without generating an assembly stub! (You no longer need
to add the constants at all.)
Bug: 11156955
Change-Id: I053c17879138787976c744a5ecf7d30ee51dc48f
The library exists outside bionic. It is dynamically loaded, to replace selected
standard socket syscalls with versions that talk to netd.
Change connect() to use the library if available.
(cherry picked from commit 3a6b627a14df8111b03e452f2df4b5f4938e0e49)
Change-Id: Ib6198e19dbc306521a26fcecfdf6e8424d163fc9
Add following functions:
bcopy, memcpy, memmove, memset, bzero, memcmp, wmemcmp, strlen,
strcpy, strncpy, stpcpy, stpncpy.
Create new directories inside arch-x86 to specify architecture: atom,
silvermont and generic (non atom or silvermont architectures are treated like generic).
Due to introducing optimized versions of stpcpy and stpncpy,
c-implementations of these functions are moved from
common for architectures makefile to arm and mips specific makefiles.
Change-Id: I990f8061c3e9bca1f154119303da9e781c5d086e
Signed-off-by: Varvara Rainchik <varvara.rainchik@intel.com>
clone(2) is the public symbol.
Also switch a test from __bionic_clone to clone; testing public API
means the test now works on glibc too.
Change-Id: If59def26a00c3afadb8a6cf9442094c35a59ffde
The upstream intention was for this to be architecture-dependent, but it's a
lot clearer if we just have one copy.
Change-Id: I4e8310496145f9f411cd2e847c8cd023b1d758e9
The OpenBSD doesn't support C99, and the extent to which we support
locales is trivial, so just do it ourselves.
Change-Id: If0a06e627ecc593f7b8ea3e9389365782e49b00e
the POSIX standard is that SIZE_MAX is defined
in stdint.h, not limits.h.
Change-Id: Iafd8ec71d1840541feaca4f53b2926b398293fac
Signed-off-by: Webb, Russell <russell.webb@intel.com>
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Reviewed-by: Ross, Andrew J <andrew.j.ross@intel.com>
Reviewed-by: Boie, Andrew P <andrew.p.boie@intel.com>
Reviewed-by: Gumbel, Matthew K <matthew.k.gumbel@intel.com>
Tested-by: Gumbel, Matthew K <matthew.k.gumbel@intel.com>
lconv is taken from ndk/sources/android/support/include/locale.h and
matches
bsd/glibc upstream.
Keep old declaration for 32-bits for compatibility.
localeconv.c and deps are taken from openbsd upstream.
Changed strtod.c accordingly.
Change-Id: I9fcc4d15f5674d192950d80edf26f36006cd31b4
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>
Also add the corresponding constant, struct, and function declarations
to <sys/socket.h>, and perfunctory tests so we know that the symbols
actually exist.
Signed-off-by: Guillaume Ranquet <guillaumex.ranquet@intel.com>
Change-Id: Ib0d854239d3716be90ad70973c579aff4895a4f7
Our <machine/asm.h> files were modified from upstream, to the extent
that no architecture was actually using the upstream ENTRY or END macros,
assuming that architecture even had such a macro upstream. This patch moves
everyone to the same macros, with just a few tweaks remaining in the
<machine/asm.h> files, which no one should now use directly.
I've removed most of the unused cruft from the <machine/asm.h> files, though
there's still rather a lot in the mips/mips64 ones.
Bug: 12229603
Change-Id: I2fff287dc571ac1087abe9070362fb9420d85d6d
This gives us:
* <dirent.h>
struct dirent64
readdir64, readdir64_r, alphasort64, scandir64
* <fcntl.h>
creat64, openat64, open64.
* <sys/stat.h>
struct stat64
fstat64, fstatat64, lstat64, stat64.
* <sys/statvfs.h>
struct statvfs64
statvfs64, fstatvfs64.
* <sys/vfs.h>
struct statfs64
statfs64, fstatfs64.
This also removes some of the incorrect #define hacks we've had in the
past (for stat64, for example, which we promised to clean up way back
in bug 8472078).
Bug: 11865851
Bug: 8472078
Change-Id: Ia46443521918519f2dfa64d4621027dfd13ac566
1. Moved arch-specific setup to their own files:
- <arch>/<arch>.mk, arch-specific configs. Variables in those config
end with the arch name.
- removed the extra complexity introduced by function libc-add-cpu-variant-src,
which seems to be not very useful these days.
2. Separated out the crt object files generation rules and set up the
rules for both TARGET_ARCH and TARGET_2ND_ARCH.
3. Build all the libraries for both TARGET_ARCH and TARGET_2ND_ARCH,
with the arch-specific LOCAL_ variables.
Bug: 11654773
Change-Id: I9c2d85db0affa49199d182236d2210060a321421
No cacheflush for LP64; use the GCC builtin instead. Clean up the
32-bit MIPS implementation now we no longer need to worry about
old versions of GCC.
Bug: 12924756
Change-Id: Ie23955b3ec194e226c4b2bce35b11d5e061f4753
Remove the linker's reliance on BSD cruft and use the glibc-style
ElfW macro. (Other code too, but the linker contains the majority
of the code that needs to work for Elf32 and Elf64.)
All platforms need dl_iterate_phdr_static, so it doesn't make sense
to have that part of the per-architecture configuration.
Bug: 12476126
Change-Id: I1d7f918f1303a392794a6cd8b3512ff56bd6e487
libc/libm support for MIPS64 targets
Change-Id: I8271941d418612a286be55495f0e95822f90004f
Signed-off-by: Chris Dearman <chris.dearman@imgtec.com>
Signed-off-by: Raghu Gandham <raghu.gandham@imgtec.com>
