* Ability to register atexit handler from atexit handler
* Correct way to handle both forms of atexit handler
Bug: https://code.google.com/p/android/issues/detail?id=66595
Bug: 4998315
Change-Id: I39529afaef97b6e1469c21389d54c0d7d175da28
If the file has no relro segment, the generated relro file will have
length 0, which caused mmap to fail. If the relro file has nonzero size,
but is too short (e.g. because it's for the wrong version of the
library), the linker would segfault while comparing the data. Fix both
these issues: don't try to map a zero length file, and don't try to
compare data that would be beyond the end of the file.
Improve test to explicitly generate two versions of the library: one
with -z relro, and one with -z norelro, so we can test both cases; also
explicitly test the case where the relro file has length 0.
Bug: 14299541
Change-Id: Id8b95585edda90e8bb5de452a35b70ed2d224934
This replaces a partial set of non-functional functions with a complete
set of functions, all of which actually work.
This requires us to implement mbsnrtowcs and wcsnrtombs which completes
the set of what we need for libc++.
The mbsnrtowcs is basically a copy & paste of wcsnrtombs, but I'm going
to go straight to looking at using the OpenBSD UTF-8 implementation rather
than keep polishing our home-grown turd.
(This patch also opportunistically switches us over to upstream btowc,
mbrlen, and wctob, since they're all trivially expressed in terms of
other functions.)
Change-Id: I0f81443840de0f1aa73b96f0b51988976793a323
Since multilib is not set every time, it needs to be per module or
there is a change that another target will use the multilib value set
previously.
Change-Id: I5c30e18d5111705cb3f6e3d4cd9ef8a28c9b746c
The glibc tests are just a regular host binary; they don't require
that you're targeting x86 or x86_64. They do seem to pick up the
suffix of the target though, even though they're always 32-bit.
Change-Id: I689ca2a4f8d7b397afa4df722b95b0d7ec904bf6
Adding the perfunctory <ctype.h> tests showed that we'd accidentally
dropped several symbols. This puts everything back in its proper place
and switches us to upstream head at the same time.
Change-Id: Ib527ad280c9baded81e667fa598698526d93e66f
Add flags and parameters to android_dlopen_ext() to allow loading a
library at an already-reserved fixed address. If the library to be
loaded will not fit within the space reserved, then the linker will
either fail, or allocate its own address space as usual, according to
which flag has been specified. This behaviour only applies to the
specific library requested; any other libraries loaded as dependencies
will be loaded in the normal fashion.
There is a new gtest included to cover the functionality added.
Bug: 13005501
Change-Id: I5d1810375b20fc51ba6a9b3191a25f9792c687f1
This is an implementation in the style of the rest: char == byte.
We might want to come back and implement UTF-8, but this is enough for ltrace.
Bug: 13747066
Change-Id: Ib2b63609c9014fdef9a8491e067467c4fc5ae3cc
Put the accept4 test in the sorted order, and put the accept4 define in
sorted order.
Also add the missing SYS_RECVMMSG and SYS_SENDMMSG defines.
Change-Id: Iba55354975e0d5027dbee53f6de752c2df719493
lconv is taken from ndk/sources/android/support/include/locale.h and
matches
bsd/glibc upstream.
Keep old declaration for 32-bits for compatibility.
localeconv.c and deps are taken from openbsd upstream.
Changed strtod.c accordingly.
Change-Id: I9fcc4d15f5674d192950d80edf26f36006cd31b4
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>
Also add the corresponding constant, struct, and function declarations
to <sys/socket.h>, and perfunctory tests so we know that the symbols
actually exist.
Signed-off-by: Guillaume Ranquet <guillaumex.ranquet@intel.com>
Change-Id: Ib0d854239d3716be90ad70973c579aff4895a4f7
This gives us:
* <dirent.h>
struct dirent64
readdir64, readdir64_r, alphasort64, scandir64
* <fcntl.h>
creat64, openat64, open64.
* <sys/stat.h>
struct stat64
fstat64, fstatat64, lstat64, stat64.
* <sys/statvfs.h>
struct statvfs64
statvfs64, fstatvfs64.
* <sys/vfs.h>
struct statfs64
statfs64, fstatfs64.
This also removes some of the incorrect #define hacks we've had in the
past (for stat64, for example, which we promised to clean up way back
in bug 8472078).
Bug: 11865851
Bug: 8472078
Change-Id: Ia46443521918519f2dfa64d4621027dfd13ac566
In order to be able to generate a list of tests for cts, the same set of
tests must exist across all platforms. This CL adds empty tests where a
test was conditionally compiled out.
This CL creates a single library libBionicTests that includes all of
the tests found in bionic-unit-tests-static.
Also fix a few missing include files in some test files.
Tested by running and compiling the tests for every platform and
verifying the same number of tests are on each platform.
Change-Id: I9989d4bfebb0f9c409a0ce7e87169299eac605a2
We don't actually need to worry about sign extension if we reject
negative values ourselves. Previously it was possible to come up
with negative but aligned values that we would pass to the kernel;
in the case of mmap (as opposed to mmap64) we'd incorrectly turn
those into large positive offsets.
Change-Id: I2aa583e0f892d59bb77429aea8730b72db32dcb0
The situation here is a bit confusing. On 64-bit, rlimit and rlimit64 are
the same, and so getrlimit/getrlimit64, setrlimit/setrlimit64,
and prlimit/prlimit64 are all the same. On 32-bit, rlimit and rlimit64 are
different. 32-bit architectures other than MIPS go one step further by having
an even more limited getrlimit system call, so arm and x86 need to use
ugetrlimit instead of getrlimit. Worse, the 32-bit architectures don't have
64-bit getrlimit- and setrlimit-equivalent system calls, and you have to use
prlimit64 instead. There's no 32-bit prlimit system call, so there's no
easy implementation of that --- what should we do if the result of prlimit64
won't fit in a struct rlimit? Since 32-bit survived without prlimit/prlimit64
for this long, I'm not going to bother implementing prlimit for 32-bit.
We need the rlimit64 functions to be able to build strace 4.8 out of the box.
Change-Id: I1903d913b23016a2fc3b9f452885ac730d71e001
32-bit Android's dev_t was wrong too. We can't fix that without ABI breakage,
but we can at least fix 64-bit Android. And add tests.
Bug: https://code.google.com/p/android/issues/detail?id=54966
Change-Id: Ie2e42cc042b78b669a1a44e55f959dbd9c52c5c9
Because there was no default := for the aarch64 libc_crt_target_cflags,
the += was causing libc_crt_target_cflags to be recursively-defined
variable, which meant that when we were compiling crtbegin.c LOCAL_PATH
would be bionic/tests/ and we'd have -Ibionic/tests/include/ and find
none of our include files.
Also fix linking of pthread_debug.cpp, at least in the disabled mode.
The enabled mode was already broken for all architectures, and continues
to be broken after this change. It's been broken for long enough that
we might want to just remove it...
(aarch64 is using the FSF linker where arm uses the gold linker.)
Change-Id: I7db2e386694f6933db043138e6e97e5ae54d4174
Addition of support for AArch64 in the linker64 target.
Change-Id: I8dfd9711278f6706063e91f626b6007ea7a3dd6e
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
This patch adds minor fixes to the bionic unit tests.
Change-Id: Ie10f33c631ed6c10987923d678711d22931ddb05
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Create a few generic testing functions to allow any memory/string tests
to be created.
Add alignment tests for memcpy/memset/strcat/strcpy/strlen.
Add an overread test for memcpy/strcat/strcpy/strlen. This test attempts
to verify that the functions do not read past the end of their buffers
(src buffer in the case of src/dst functions).
Bug: 9797008
Change-Id: Ib3223ca1b99e729ae8229adc2d03f4dc3103d97c
In practice, thanks to all the registers the stubs don't actually change,
but it's confusing to have an incorrect declaration.
I suspect that fcntl remains broken for aarch64; it happens to work for
x86_64 because the first vararg argument gets placed in the right register
anyway, but I have no reason to believe that's true for aarch64.
This patch adds a unit test, though, so we'll be able to tell when we get
as far as running the unit tests.
Change-Id: I58dd0054fe99d7d51d04c22781d8965dff1afbf3
Add a bionic-unit-tests-glibc-run target to run the glibc bionic unit tests.
Modify the bionic-unit-tests-run-on-host to make sure that the /system/bin
directory is created properly.
Also remove the EXTERNAL_STORAGE variable which isn't used any more.
Bug: 11234772
Change-Id: I9aea501d05700b29e938f672474d550b1872a78b
Modern architectures only get the *at(2) system calls. For example,
aarch64 doesn't have open(2), and expects userspace to use openat(2)
instead.
Change-Id: I87b4ed79790cb8a80844f5544ac1a13fda26c7b5
Allows running the tests linked with bionic .so on the host if host and
target are compatible. See more comments and usage limitation inlined.
make bionic-unit-tests-run-on-host should do build and run.
Change-Id: I5946fa72e009d324baa9da18f460294b3c1a615e
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>
clock_gettime was returning EINVAL for the values
produced by pthread_getcpuclockid.
Bug: 10346183
Change-Id: Iabe643d7d46110bb311a0367aa0fc737f653208e
Our intptr_t and uintptr_t aren't "long". Add a compilation test so we remember
to fix this to cope with 32- and 64-bit later.
Bug: http://code.google.com/p/android/issues/detail?id=57218
Change-Id: I2f816d339edb4f7d57e4418b818fb4c602093f38
Get rid of a lot of the duplication in the various FORTIFY_SOURCE
tests. Instead, we build 4 separate static libraries, with
4 different compile time options, and link them into the final test
binary.
Change-Id: Idb0b7cccc8dd837adb037bf4ddfe8942ae138230
Kernel provides virtual DSO for stack unwinding/exception handlind info for
signal usage case. Stack unwinding routines use 'dl_iterate_phdr' function
for additional DWARF info gathering from DSOs. Patch enables virtual DSO
enumeration via dl_iterate_phdr function.
Signed-off-by: Sergey Melnikov <sergey.melnikov@intel.com>
Change-Id: Ic2882b28f40b456a088bc1e63c50cbfda7e4a102
In 829c089f83, we disabled all
FORTIFY_SOURCE support when compiling under clang. At the time,
we didn't have proper test cases, and couldn't easily create targeted
clang tests.
This change re-enables FORTIFY_SOURCE support under clang for a
limited set of functions, where we have explicit unittests available.
The functions are:
* memcpy
* memmove
* strcpy
* strncpy
* strcat
* strncat
* memset
* strlen (with modifications)
* strchr (with modifications)
* strrchr (with modifications)
It may be possible, in the future, to enable other functions. However,
I need to write unittests first.
For strlen, strchr, and strrchr, clang unconditionally calls the
fortified version of the relevant function. If it doesn't know the
size of the buffer it's dealing with, it passes in ((size_t) -1),
which is the largest possible size_t.
I added two new clang specific unittest files, primarily copied
from fortify?_test.cpp.
I've also rebuild the entire system with these changes, and didn't
observe any obvious problems.
Change-Id: If12a15089bb0ffe93824b485290d05b14355fcaa
- Implemented chk_memalign.
- Fixed a few bugs in leak_memalign.
- Implemented {leak,fill,check,qemu}_malloc_usable_size.
- Make malloc_usable_size update at run time.
- Add malloc_test.cpp as a small set of tests for the
malloc debug routines.
- Fix the qemu routines since it's been broken since it moved to C++.
- Add support for the %u format to the out_vformat in libc_logging.cpp.
This is used by the emulator code.
Tested using the bionic-unit-tests with setprop libc.debug.malloc
set to 1, 5, and 10.
I tested as much as possible on the emulator, but tracing doesn't appear
to be working properly.
Bug: 6143477
Merge change from internal master.
(cherry-picked from commit 3d594c2580)
Change-Id: I4ae00fffba82315a8c283f35893fd554460722fb
Add support for fortify source level 2 to strncpy.
This will enable detection of more areas where strncpy
is used inappropriately. For example, this would have detected
bug 8727221.
Move the fortify_source tests out of string_test.cpp, and
put it into fortify1_test.cpp.
Create a new fortify2_test.cpp file, which copies all
the tests in fortify1_test.cpp, and adds fortify_source level
2 specific tests.
Change-Id: Ica0fba531cc7d0609e4f23b8176739b13f7f7a83
- eventfd.cpp and eventfd.s will output to the same file when building libc.a
out/target/product/*/obj/STATIC_LIBRARIES/libc_intermediates/WHOLE/libc_common_objs/eventfd.o
- And then `eventfd` will undefined when statically linked to libc.
Also add a unit test.
Change-Id: Ib310ade3256712ca617a90539e8eb07459c98505
We only need one logging API, and I prefer the one that does no
allocation and is thus safe to use in any context.
Also use O_CLOEXEC when opening the /dev/log files.
Move everything logging-related into one header file.
Change-Id: Ic1e3ea8e9b910dc29df351bff6c0aa4db26fbb58
In the old code, the index was a file to itself, so it made sense to
read until you hit the end of the file. In the new code, the index is
followed by hundreds of KiB of data, so we need to just search the
index.
Bug: 8368791
Change-Id: Icf5f8b5516cf3a93679fa849c9f6cd1cb100e0f1
Normally, the C library implicitly caches your timezone by virtue
of the fact that the prehistoric API assumes a single timezone for
the entire process.
The unfortunate mktime_tz and localtime_tz extensions work around
this, but represent timezones as strings to their callers, so code
that makes heavy use of these needs a cache to be able to perform
acceptably until it can hopefully one day be rewritten to use
java.util.Calendar or icu4c.
Bug: 8270865
Change-Id: I92e3964e86dc33ceac925f819cc5e26ff4203f50
Some build servers are still out of date, so we're better off having
the known quanitity of the consistently out-of-date prebuilt host gcc.
Change-Id: Ib6308ae926ffa1ac5d95efbbf32052344c17a6b8
This reverts commit 6f94de3ca4
(Doesn't try to increase the number of TLS slots; that leads to
an inability to boot. Adds more tests.)
Change-Id: Ia7d25ba3995219ed6e686463dbba80c95cc831ca
This brings us up to date with FreeBSD HEAD, fixes various bugs, unifies
the set of functions we support on ARM, MIPS, and x86, fixes "long double",
adds ISO C99 support, and adds basic unit tests.
It turns out that our "long double" functions have always been broken
for non-normal numbers. This patch fixes that by not using the upstream
implementations and just forwarding to the regular "double" implementation
instead (since "long double" on Android is just "double" anyway, which is
what BSD doesn't support).
All the tests pass on ARM, MIPS, and x86, plus glibc on x86-64.
Bug: 3169850
Bug: 8012787
Bug: https://code.google.com/p/android/issues/detail?id=6697
Change-Id: If0c343030959c24bfc50d4d21c9530052c581837
Add a test to ensure that stack canaries are working
correctly. Since stack canaries aren't normally generated
on non-string functions, we have to enable stack-protector-all.
Add a test to ensure that an out of bounds strcpy generates
a runtime failure.
Change-Id: Id0d3e59fc4b9602da019e4d35c5c653e1a57fae4
The MIPS toolchain can't generate them because they're incompatible
with the MIPS ABI (which requires .dynsym match the GOT, while GNU-style
requires .dynsym to be sorted by hash code), so there's nothing to test.
Change-Id: I2220f452fe6fe595ec1312544cc741dd390a36a5
You could argue that this is hurting people smart enough to have manually
allocated a large-enough sigset_t, but those people are smart enough to
implement their own sigset functions too.
I wonder whether our least unpleasant way out of our self-inflicted 32-bit
cesspool is to have equivalents of _FILE_OFFSET_BITS such as _SIGSET_T_BITS,
so calling code could opt in? You'd have to be careful passing sigset_t
arguments between code compiled with different options.
Bug: 5828899
Change-Id: I0ae60ee8544835b069a2b20568f38ec142e0737b
Based on our open-source RE2 benchmarking code.
Includes benchmarks for a handful of <string.h> functions.
Change-Id: I30eb70d25dbf4ad5f2ca44976a8ce3b1ff7dad01
Also ensure that dlopen(3) errors always include the name of the library we
failed to open.
Also fix a bug where we'd fall back to searching LD_LIBRARY_PATH and the
built-in paths for names that include slashes.
Bug: http://code.google.com/p/android/issues/detail?id=38479
Change-Id: Ib2c009ed083344a7a012749d58f8679db2f26c78
Most of these tests were in system/extras, but I've added more to cover other
cases explicitly mentioned by POSIX.
Change-Id: I5e8d77e4179028d77306935cceadbb505515dcde
Based on a pair of patches from Intel:
https://android-review.googlesource.com/#/c/43909/https://android-review.googlesource.com/#/c/44903/
For x86, this patch supports _both_ the global that ARM/MIPS use
and the per-thread TLS entry (%gs:20) that GCC uses by default. This
lets us support binaries built with any x86 toolchain (right now,
the NDK is emitting x86 code that uses the global).
I've also extended the original tests to cover ARM/MIPS too, and
be a little more thorough for x86.
Change-Id: I02f279a80c6b626aecad449771dec91df235ad01
Also fix problem with multi-user IDs that the home directory was
returned as "/data" instead of "/" unlike all the other uids.
Change-Id: I914d22052e5a86552989f8969b85aadbc748c65d
Several previous changes conspired to make a mess of the thread list
in static binaries. This was most obvious when trying to call
pthread_key_delete(3) on the main thread.
Bug: http://code.google.com/p/android/issues/detail?id=36893
Change-Id: I2a2f553114d8fb40533c481252b410c10656da2e
