Get rid of a lot of the duplication in the various FORTIFY_SOURCE
tests. Instead, we build 4 separate static libraries, with
4 different compile time options, and link them into the final test
binary.
Change-Id: Idb0b7cccc8dd837adb037bf4ddfe8942ae138230
Enable FORTIFY_SOURCE protections under clang for the following
functions:
* vsprintf
* vsnprintf
and add unittests.
Change-Id: I90f8a27f7b202c78b5dd8ebf53050bf9e33496f7
d329697 is too complicated. Change the multiple property pages back to
a single 128K property area that's mapped in entirely at initialization
(the memory will not get allocated until the pages are touched).
d329697 has other changes useful for testing (moving property area
initialization inside bionic and adding __system_property_set_filename)
so undo the change manually rather than with git revert.
Change-Id: Icd137669a4f8bc248e9dd2c1e8cc54e9193c9a6d
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Deliberately put items several levels deep in the trie hierarchy to test
the trie traversal
Change-Id: I995a1cdd3b5e74162fb5d25bc0f65140bdf2f719
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Kernel provides virtual DSO for stack unwinding/exception handlind info for
signal usage case. Stack unwinding routines use 'dl_iterate_phdr' function
for additional DWARF info gathering from DSOs. Patch enables virtual DSO
enumeration via dl_iterate_phdr function.
Signed-off-by: Sergey Melnikov <sergey.melnikov@intel.com>
Change-Id: Ic2882b28f40b456a088bc1e63c50cbfda7e4a102
d329697 is too complicated. Change the multiple property pages back to
a single 128K property area that's mapped in entirely at initialization
(the memory will not get allocated until the pages are touched).
d329697 has other changes useful for testing (moving property area
initialization inside bionic and adding __system_property_set_filename)
so undo the change manually rather than with git revert.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 5f05348c18)
Change-Id: I690704552afc07a4dd410277893ca9c40bc13e5f
The property area is initially one 4K region, automatically expanding as
needed up to 64 regions.
To avoid duplicating code, __system_property_area_init() now allocates
and initializes the first region (previously it was allocated in init's
init_property_area() and initialized in bionic). For testing purposes,
__system_property_set_filename() may be used to override the file used
to map in regions.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit d32969701b)
Change-Id: I038d451fe8849b0c4863663eec6f57f6521bf4a7
d329697 is too complicated. Change the multiple property pages back to
a single 128K property area that's mapped in entirely at initialization
(the memory will not get allocated until the pages are touched).
d329697 has other changes useful for testing (moving property area
initialization inside bionic and adding __system_property_set_filename)
so undo the change manually rather than with git revert.
Change-Id: I0ecb27843404f93af5489f15bfe657d65175e4f0
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Deliberately put items several levels deep in the trie hierarchy to test
the trie traversal
Change-Id: Id3cbd2e7d3500216b1ac8025eac70c0939622903
Signed-off-by: Greg Hackmann <ghackmann@google.com>
The property area is initially one 4K region, automatically expanding as
needed up to 64 regions.
To avoid duplicating code, __system_property_area_init() now allocates
and initializes the first region (previously it was allocated in init's
init_property_area() and initialized in bionic). For testing purposes,
__system_property_set_filename() may be used to override the file used
to map in regions.
Change-Id: Ibe00ef52464bfa590953c4699a6d98383b0142b1
Signed-off-by: Greg Hackmann <ghackmann@google.com>
find_nth() will be inefficient on a trie. Since find_nth() is only used
internally and only for enumerating properties, we can add a foreach()
function to do this directly.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
(cherry picked from commit 577418403d)
Change-Id: Iaca97d1182ce2c28863ba85241cbb5cf6185eb2f
The properties benchmarks were reading n properties from a property
area with n properties in it, which was making it hard to compare
the time between runs of different sizes. Change the benchmark
to read a random property per iteration so the numbers between
runs are comparable.
Change-Id: Ib1648ce0948d9038fce76d209608427376cfb8da
In 829c089f83, we disabled all
FORTIFY_SOURCE support when compiling under clang. At the time,
we didn't have proper test cases, and couldn't easily create targeted
clang tests.
This change re-enables FORTIFY_SOURCE support under clang for a
limited set of functions, where we have explicit unittests available.
The functions are:
* memcpy
* memmove
* strcpy
* strncpy
* strcat
* strncat
* memset
* strlen (with modifications)
* strchr (with modifications)
* strrchr (with modifications)
It may be possible, in the future, to enable other functions. However,
I need to write unittests first.
For strlen, strchr, and strrchr, clang unconditionally calls the
fortified version of the relevant function. If it doesn't know the
size of the buffer it's dealing with, it passes in ((size_t) -1),
which is the largest possible size_t.
I added two new clang specific unittest files, primarily copied
from fortify?_test.cpp.
I've also rebuild the entire system with these changes, and didn't
observe any obvious problems.
Change-Id: If12a15089bb0ffe93824b485290d05b14355fcaa
Removed 'join_count' from pthread_internal_t and switched to using the flag
PTHREAD_ATTR_FLAG_JOINED to indicate if a thread is being joined. Combined with
a switch to a while loop in pthread_join, this fixes spurious wake-ups but
prevents a thread from being joined multiple times. This is fine for
two reasons:
1) The pthread_join specification allows for undefined behavior when multiple
threads try to join a single thread.
2) There is no thread safe way to allow multiple threads to join a single
thread with the pthread interface. The second thread calling pthread_join
could be pre-empted until the thread is destroyed and its handle reused for
a different thread. Therefore multi-join is always an error.
Bug: https://code.google.com/p/android/issues/detail?id=52255
Change-Id: I8b6784d47620ffdcdbfb14524e7402e21d46c5f7
7e6ce1a3c5 fixed abort() to raise
SIGABRT rather than causing SIGSEGV. However, the unittests were
not updated.
Fix unittests.
Change-Id: I73db194127b9b9e9440358aa94273863765a736b
- Implemented chk_memalign.
- Fixed a few bugs in leak_memalign.
- Implemented {leak,fill,check,qemu}_malloc_usable_size.
- Make malloc_usable_size update at run time.
- Add malloc_test.cpp as a small set of tests for the
malloc debug routines.
- Fix the qemu routines since it's been broken since it moved to C++.
- Add support for the %u format to the out_vformat in libc_logging.cpp.
This is used by the emulator code.
Tested using the bionic-unit-tests with setprop libc.debug.malloc
set to 1, 5, and 10.
I tested as much as possible on the emulator, but tracing doesn't appear
to be working properly.
Bug: 6143477
Merge change from internal master.
(cherry-picked from commit 3d594c2580)
Change-Id: I4ae00fffba82315a8c283f35893fd554460722fb
__strcat_chk and __strncat_chk are slightly inefficient,
because they end up traversing over the same memory region
two times.
This change optimizes __strcat_chk / __strncat_chk so they
only access the memory once. Although I haven't benchmarked these
changes, it should improve the performance of these functions.
__strlen_chk - expose this function, even if -D_FORTIFY_SOURCE
isn't defined. This is needed to compile libc itself without
-D_FORTIFY_SOURCE.
Change-Id: Id2c70dff55a276b47c59db27a03734d659f84b74
Add support for fortify source level 2 to strncpy.
This will enable detection of more areas where strncpy
is used inappropriately. For example, this would have detected
bug 8727221.
Move the fortify_source tests out of string_test.cpp, and
put it into fortify1_test.cpp.
Create a new fortify2_test.cpp file, which copies all
the tests in fortify1_test.cpp, and adds fortify_source level
2 specific tests.
Change-Id: Ica0fba531cc7d0609e4f23b8176739b13f7f7a83
- eventfd.cpp and eventfd.s will output to the same file when building libc.a
out/target/product/*/obj/STATIC_LIBRARIES/libc_intermediates/WHOLE/libc_common_objs/eventfd.o
- And then `eventfd` will undefined when statically linked to libc.
Also add a unit test.
Change-Id: Ib310ade3256712ca617a90539e8eb07459c98505
We only need one logging API, and I prefer the one that does no
allocation and is thus safe to use in any context.
Also use O_CLOEXEC when opening the /dev/log files.
Move everything logging-related into one header file.
Change-Id: Ic1e3ea8e9b910dc29df351bff6c0aa4db26fbb58
In the old code, the index was a file to itself, so it made sense to
read until you hit the end of the file. In the new code, the index is
followed by hundreds of KiB of data, so we need to just search the
index.
Bug: 8368791
Change-Id: Icf5f8b5516cf3a93679fa849c9f6cd1cb100e0f1
Normally, the C library implicitly caches your timezone by virtue
of the fact that the prehistoric API assumes a single timezone for
the entire process.
The unfortunate mktime_tz and localtime_tz extensions work around
this, but represent timezones as strings to their callers, so code
that makes heavy use of these needs a cache to be able to perform
acceptably until it can hopefully one day be rewritten to use
java.util.Calendar or icu4c.
Bug: 8270865
Change-Id: I92e3964e86dc33ceac925f819cc5e26ff4203f50
