We're getting cold feet on this one... let's put it back.
This reverts commit 210331d976.
Change-Id: I6b0d3c2b1dbf7f1dc9566979a91b7504c2189269
(cherry picked from commit 6a918870ba)
Save and restore floating point registers via 64-bit
load/stores when possible. Use assembler's builtin macro
ops to generate pairs of 32-bit load/stores on Mips I cpus.
Some cpus or FR modes have only 16 even-numbered dp fp regs.
This is exposed by _MIPS_FPSET, defined by existing compilers.
(cherry picked from commit dd37251c47)
Change-Id: Ibd43653701a363a77af85121d3cbd229d132a06a
In practice, with this implementation we never need to make a system call.
We get the main thread's tid (which is the same as our pid) back from
the set_tid_address system call we have to make during initialization.
A new pthread will have the same pid as its parent, and a fork child's
main (and only) thread will have a pid equal to its tid, which we get for
free from the kernel before clone returns.
The only time we'd actually have to make a getpid system call now is if
we take a signal during fork and the signal handler calls getpid. (That,
or we call getpid in the dynamic linker while it's still dealing with its
own relocations and hasn't even set up the main thread yet.)
Bug: 15387103
Change-Id: I6d4718ed0a5c912fc75b5f738c49a023dbed5189
vfork() was removed from POSIX 2008, so this replaces its implementation
with a call to fork().
Bug: 13935372
Change-Id: I6d99ac9e52a2efc5ee9bda1cab908774b830cedc
This function has been removed from POSIX.
Unfortunately, we can't leave #define index(a, b) strchr((a), (b)) in its place
because defining a preprocessor macro for index() breaks a whole lot of code.
Bug: 13935372
Change-Id: Ifda348acde06da61c12e7ee2f8fe6950a3174dd1
These symbols are still defined for LP32 for binary compatibility, but
the declarations have been replaced with the POSIX recommended #defines.
Bug: 13935372
Change-Id: Ief7e6ca012db374588ba5839f11e8f3a13a20467
System calls can be pretty slow. This is mako, which has one of our
lowest latencies:
iterations ns/op
BM_unistd_getpid 10000000 209
BM_unistd_gettid 200000000 8
Bug: 15297299 (kernel panic from too many gettid calls)
Bug: 15315766 (excessive gettid overhead in liblogd)
Change-Id: I49656c0fc5b5d092390264a59e4f2c0d8a8b1aeb
The problem with the original patch was that using syscall(3) means that
errno can be set, but pthread_create(3) was abusing the TLS errno slot as
a pthread_mutex_t for the thread startup handshake.
There was also a mistake in the check for syscall failures --- it should
have checked against -1 instead of 0 (not just because that's the default
idiom, but also here because futex(2) can legitimately return values > 0).
This patch stops abusing the TLS errno slot and adds a pthread_mutex_t to
pthread_internal_t instead. (Note that for LP64 sizeof(pthread_mutex_t) >
sizeof(uintptr_t), so we could potentially clobber other TLS slots too.)
I've also rewritten the LP32 compatibility stubs to directly reuse the
code from the .h file.
This reverts commit 75c55ff84e.
Bug: 15195455
Change-Id: I6ffb13e5cf6a35d8f59f692d94192aae9ab4593d
This reverts commit ced906c849.
Causes issues on art / dalvik due to a broken return value
check and other undiagnosed issues.
bug: 15195455
Change-Id: I5d6bbb389ecefb0e33a5237421a9d56d32a9317c
The unwinder will end up on the parent thread's stack if the return
address register is not cleared.
Bug: 14270816
Bug: 15195760
Change-Id: Iebcdf5cc881cad245643bb193760de35eb7f8b19
Add optimized versions of bcopy and wmemmove for AArch64 based on the
memmove implementation
Change-Id: I82fbe8a7221ce224c567ffcfed7a94a53640fca8
Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
This reverts commit 8167dd7cb9.
For some reason I thought the bcopy change was bzero. The bcopy code doesn't pass our tests, so reverting until I can figure out what's wrong.
Change-Id: Id89fe959ea5105cd58dff6bba8d91a30cc4bcb07
Add optimized versions of bcopy and wmemmove for AArch64 based on the
memmove implementation
Change-Id: Ie43d0ff4f8ec4edba5b4fb5ccacd941f81ac6557
Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
glibc doesn't have tkill or tgkill and says "use syscall(3) instead".
I've left tgkill since it's quite widely used, but there's no reason
to have tkill as well.
Bug: 11156955
Change-Id: Ifc0af750320086f829bc9914551c172b501f3b60
Also hide part of the system properties compatibility code, since
we needed to touch that to keep it building.
I'll remove __futex_syscall4 and futex in a later patch.
Bug: 11156955
Change-Id: Ibbf42414c5bb07fb9f1c4a169922844778e4eeae
This was accidentally added at a time when you couldn't add a constant
to <syscall.h> without generating an assembly stub! (You no longer need
to add the constants at all.)
Bug: 11156955
Change-Id: I053c17879138787976c744a5ecf7d30ee51dc48f
The library exists outside bionic. It is dynamically loaded, to replace selected
standard socket syscalls with versions that talk to netd.
Change connect() to use the library if available.
(cherry picked from commit 3a6b627a14df8111b03e452f2df4b5f4938e0e49)
Change-Id: Ib6198e19dbc306521a26fcecfdf6e8424d163fc9
Add following functions:
bcopy, memcpy, memmove, memset, bzero, memcmp, wmemcmp, strlen,
strcpy, strncpy, stpcpy, stpncpy.
Create new directories inside arch-x86 to specify architecture: atom,
silvermont and generic (non atom or silvermont architectures are treated like generic).
Due to introducing optimized versions of stpcpy and stpncpy,
c-implementations of these functions are moved from
common for architectures makefile to arm and mips specific makefiles.
Change-Id: I990f8061c3e9bca1f154119303da9e781c5d086e
Signed-off-by: Varvara Rainchik <varvara.rainchik@intel.com>
clone(2) is the public symbol.
Also switch a test from __bionic_clone to clone; testing public API
means the test now works on glibc too.
Change-Id: If59def26a00c3afadb8a6cf9442094c35a59ffde
The upstream intention was for this to be architecture-dependent, but it's a
lot clearer if we just have one copy.
Change-Id: I4e8310496145f9f411cd2e847c8cd023b1d758e9
The OpenBSD doesn't support C99, and the extent to which we support
locales is trivial, so just do it ourselves.
Change-Id: If0a06e627ecc593f7b8ea3e9389365782e49b00e
the POSIX standard is that SIZE_MAX is defined
in stdint.h, not limits.h.
Change-Id: Iafd8ec71d1840541feaca4f53b2926b398293fac
Signed-off-by: Webb, Russell <russell.webb@intel.com>
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Reviewed-by: Ross, Andrew J <andrew.j.ross@intel.com>
Reviewed-by: Boie, Andrew P <andrew.p.boie@intel.com>
Reviewed-by: Gumbel, Matthew K <matthew.k.gumbel@intel.com>
Tested-by: Gumbel, Matthew K <matthew.k.gumbel@intel.com>
lconv is taken from ndk/sources/android/support/include/locale.h and
matches
bsd/glibc upstream.
Keep old declaration for 32-bits for compatibility.
localeconv.c and deps are taken from openbsd upstream.
Changed strtod.c accordingly.
Change-Id: I9fcc4d15f5674d192950d80edf26f36006cd31b4
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>