Because we re-raise various signals, we corrupt the si_code that debuggerd
sees when it ptraces our siginfo. One possible solution (shown here) is to
pass the original si_code value in the message we send to debuggerd.
Change-Id: I76f9aa2c0442e5cab611d132532409e700383907
Add missing second param to soinfo_link_image in a section that's not
compiled on ARM.
Bug: 13005501
Change-Id: Id0ede8e03da4e05b25c0aeb24a840f868031d4e8
This has been annoying me for a while, because it's often quite misleading.
Today, for example, I saw:
Fatal signal 13 (SIGPIPE) at 0x6573 (code=0), thread 25971 (top)
where the apparent address is actually the pid of the signal source (in this
case the kernel on behalf of the thread itself).
This patch isn't as fancy as strace, but it at least means we never say
anything misleading. We could decode the si_code field like strace and
debuggerd, but I'm reluctant to do that without some way to share the code
between at least bionic and debuggerd.
Examples after:
Fatal signal 13 (SIGPIPE), code 0 in tid 9157 (top)
Fatal signal 11 (SIGSEGV), code 1, fault addr 0x0 in tid 9142 (crasher64)
Fatal signal 6 (SIGABRT), code -6 in tid 9132 (crasher64)
(Note that the code still shows as 0 for SIGPIPE in the signal handler itself
but as -6 (SI_TKILL) in debuggerd; this is actually correct --- debuggerd is
showing the re-raised signal sent at the end of the signal handler that
initially showed the correct code 0.)
Change-Id: I71cad4ab61f422a4f6687a60ac770371790278e0
Add flags and a file descriptor to android_dlopen_ext() to allow writing
the RELRO section of the loaded library to a file after relocation
processing, and to allow mapping identical pages from the file over the
top of relocated memory in another process. Explicitly comparing the
pages is required in case a page contains a reference to a symbol
defined in another library loaded at a random base address.
Bug: 13005501
Change-Id: Ibb5b2d384edfaa5acf3e97a5f8b6115c10497a1e
Add flags and parameters to android_dlopen_ext() to allow loading a
library at an already-reserved fixed address. If the library to be
loaded will not fit within the space reserved, then the linker will
either fail, or allocate its own address space as usual, according to
which flag has been specified. This behaviour only applies to the
specific library requested; any other libraries loaded as dependencies
will be loaded in the normal fashion.
There is a new gtest included to cover the functionality added.
Bug: 13005501
Change-Id: I5d1810375b20fc51ba6a9b3191a25f9792c687f1
Add a function "android_dlopen_ext()", defined in <android/dlext.h>.
This is an extended version of dlopen() which takes a struct for passing
additional parameters for Android-specific functionality. This will be
used to support RELRO section sharing between separate processes.
Bug: 13005501
Change-Id: I9c99b2f2a02ee329dedaeba09ef3a1113b17b2d6
Use LOCAL_MODULE_STEM_32 and LOCAL_MODULE_STEM_64 to build
linker and linker64. Set LOCAL_MULTILIB := both for consistency
with other rules of this type, although LOCAL_MULTILIB := both is
only consumed by executable.mk which is skipped by
linker_executable.mk. Duplicate the necessary new parts of
executable.mk.
Change-Id: I888e87cf125cfbcfdee6a55b6377d8bc5ce402ea
Our <machine/asm.h> files were modified from upstream, to the extent
that no architecture was actually using the upstream ENTRY or END macros,
assuming that architecture even had such a macro upstream. This patch moves
everyone to the same macros, with just a few tweaks remaining in the
<machine/asm.h> files, which no one should now use directly.
I've removed most of the unused cruft from the <machine/asm.h> files, though
there's still rather a lot in the mips/mips64 ones.
Bug: 12229603
Change-Id: I2fff287dc571ac1087abe9070362fb9420d85d6d
When bionic's dynamic linker processes the .dynamic section of a MIPS ELF binary and encounters the DT_MIPS_RLD_MAP dynamic array tag, it calculates the address of where to write a pointer to the _r_debug structure. The current implementation simply reads the value given in the d_ptr field and writes the pointer address to that location. However, this value has to be adjusted to reflect the real load address of the binary. Otherwise the linker will write to a faulty location possibly resulting in a crash when linking a MIPS binary that includes DT_MIPS_RLD_MAP. This change corrects that problem.
Change-Id: I1a91874f7ab47289001fe72d9016660c14c70362
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Remove the linker's reliance on BSD cruft and use the glibc-style
ElfW macro. (Other code too, but the linker contains the majority
of the code that needs to work for Elf32 and Elf64.)
All platforms need dl_iterate_phdr_static, so it doesn't make sense
to have that part of the per-architecture configuration.
Bug: 12476126
Change-Id: I1d7f918f1303a392794a6cd8b3512ff56bd6e487
Also move some of the stuff that should be in <link.h> out of the
private "linker.h", to make it clearer that these are public API
known to gdb that we can't change.
Bug: 12554197
Change-Id: I830e1260d3d8b833ed99bc1518f1c6b6102be8af
Some system functions like munmap expect soinfo's size to be size_t, but currently
it is unsigned. Change it to size_t to fit 64bit's portability.
Change-Id: I0bf6d522b38b0cd9bf1db05b004b5326217412a2
Signed-off-by: Weiwu Chen <weiwu.chen@intel.com>
Signed-off-by: Qiming Shi <qiming.shi@intel.com>
Do not use the magic number 0xFFFFFFFFU to represent the max value of an address
as it's not correct on 64bit platform. We should use UINTPTR_MAX instead.
Change-Id: I1fc6f5864a651b2eddea2333cb0788f9d9223270
Signed-off-by: Qiming Shi <qiming.shi@intel.com>
Signed-off-by: Weiwu Chen <weiwu.chen@intel.com>
We're not going to have init(1) set LD_LIBRARY_PATH globally on 64-bit.
This patch makes it possible for libnativehelper to set LD_LIBRARY_PATH
in each Java VM (to support System.loadLibrary) without also hard-coding
the default search path there.
Change-Id: If13961fae976e06dd80d5ef522f31e8b7eb01154
We don't need this on architectures other than aarch64, and
we're still investigating why we need it on aarch64, but it
doesn't seem unreasonable to have this flag set when linking
the dynamic linker anyway; it's clearly the intended behavior.
Change-Id: I4fa1b4ae543a818979934bf818eabac03bb9154f
If the linker can't resolve its own internal references to symbols,
we currently exit silently (albeit with EXIT_FAILURE). Not very helpful.
Change-Id: I1614fc970dee4560b38832ede1987b65a8e53a1e
Addition of support for AArch64 in the linker64 target.
Change-Id: I8dfd9711278f6706063e91f626b6007ea7a3dd6e
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
Under valgrind ehdr_vdso is null and causing segfault.
Adding debug info for vdso producing plenty of issues on debugging
through gdbserver, removing it. It doesn't seem it should be here.
Unwinding through vdso test still works.
Change-Id: I1a7e233c493f2268d725fa8d7279822d07decc49
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>
Integration of kernel VDSO into internal bionic data structures using
common functions.
Fix for dl_iterate_phdr function: the function provides incorrect
address of object in case of nonzero virtual and base addresses.
Location in address space of a particular program header should be
calculated using the formula: addr = base_addr + virtual_addr.
Signed-off-by: Sergey Melnikov <sergey.melnikov@intel.com>
Change-Id: Ie2ab4257fd456242aab8afed0bd5bd6b29e81d6d
We don't need our own architecture macros; the standard ones will do.
This patch also fixes some __x86_64__ tests to be USE_RELA tests instead,
because they're not actually x86_64-specific.
I've cleaned up architecture-specific code slightly so where possible
all the code corresponding to a particular architecture is together.
This patch also fixes a bug in LP64 DT_PLTGOT handling, which should be
an error rather than falling through into DT_DEBUG! There was another #ifdef
bug where we'd only report unexpected DT_ entries on MIPS.
Change-Id: Id1d04e372611f641c1aa278a18e379f28af9eaf5
Like the new TODO says, though, do we need this at all? Wouldn't we be better
off just using the regular architecture-specific macros? This is a dynamic
linker, so there's never a possibility of cross-linking.
Change-Id: I7be6b8663f5e585c4024a49aae383430c86a3c1b
Also clean up <signal.h> and revert the hacks that were necessary
for 64-bit in linker/debugger.cpp until now.
Change-Id: I3b0554ca8a49ee1c97cda086ce2c1954ebc11892
The x86_64 build was failing because clone.S had a call to __thread_entry which
was being added to a different intermediate .a on the way to making libc.so,
and the linker couldn't guarantee statically that such a relocation would be
possible.
ld: error: out/target/product/generic_x86_64/obj/STATIC_LIBRARIES/libc_common_intermediates/libc_common.a(clone.o): requires dynamic R_X86_64_PC32 reloc against '__thread_entry' which may overflow at runtime; recompile with -fPIC
This patch addresses that by ensuring that the caller and callee end up in the
same intermediate .a. While I'm here, I've tried to clean up some of the mess
that led to this situation too. In particular, this removes libc/private/ from
the default include path (except for the DNS code), and splits out the DNS
code into its own library (since it's a weird special case of upstream NetBSD
code that's diverged so heavily it's unlikely ever to get back in sync).
There's more cleanup of the DNS situation possible, but this is definitely a
step in the right direction, and it's more than enough to get x86_64 building
cleanly.
Change-Id: I00425a7245b7a2573df16cc38798187d0729e7c4
If __get_tls has the right type, a lot of confusing casting can disappear.
It was probably a mistake that __get_tls was exposed as a function for mips
and x86 (but not arm), so let's (a) ensure that the __get_tls function
always matches the macro, (b) that we have the function for arm too, and
(c) that we don't have the function for any 64-bit architecture.
Change-Id: Ie9cb989b66e2006524ad7733eb6e1a65055463be
This reverts commits eb1b07469f and
d14dc3b87f, and fixes the bug where
we were calling mmap (which might cause errno to be set) before
__set_tls (which is required to implement errno).
Bug: 8557703
Change-Id: I2c36d00240c56e156e1bb430d8c22a73a068b70c
We notify debuggerd of problems by installing signal handlers. That's
fine except for when the signal is caused by us running off the end of
a thread's stack and into the guard page.
Bug: 8557703
Change-Id: I1ef65b4bb3bbca7e9a9743056177094921e60ed3
Kernel provides virtual DSO for stack unwinding/exception handlind info for
signal usage case. Stack unwinding routines use 'dl_iterate_phdr' function
for additional DWARF info gathering from DSOs. Patch enables virtual DSO
enumeration via dl_iterate_phdr function.
Signed-off-by: Sergey Melnikov <sergey.melnikov@intel.com>
Change-Id: Ic2882b28f40b456a088bc1e63c50cbfda7e4a102
Text relocations unnecessarily mark pages as dirty, preventing them
from being swapped out, wasting memory. Also, text relocations
prevent the code from running on certain hardened systems.
Print a message in logcat and stderr when we see a text relocation,
to encourage developers to fix their code.
Change-Id: I6051a7463911e090ae5727a355397d539669d5b9
This matches glibc and makes life easier for developers who want to
sometimes preload a library from init (which has no conditionals); they
can simply move/remove the library to disable.
Change-Id: I579b8633f958235af6e46bb53b378b9e363afb1f
* commit '98f7659d7e3a7d75c68a41299f6ee55d7d35c27b':
Don't fail to run DT_INIT and DT_INIT_ARRAY constructors if a shared library has DT_PREINIT_ARRAY constructors.
The GNU dynamic linker silently ignores a DT_PREINIT_ARRAY section
in a shared library. We had ineffectual code that tried to report
an error, which I tried to fix but got wrong --- my version still
wouldn't report the error to the caller, but would prevent us from
continuing to call constructors.
Bug: 8825226
Change-Id: I4fd8450ecc44d8767a1cb808aeecfbfbfc77c070
get_AT_SECURE() was getting called before linker_env_init() had
been called, and returning the default value ("true"). This was
causing us to reopen closed stdin, stdout, and stderr for ALL
processes, not just privileged (setuid) processes.
Calling path:
- __linker_init
- soinfo_link_image
- get_AT_SECURE
- __linker_init_post_relocation
- linker_env_init
This change restores the intended behavior of only re-opening
stdin, stdout, and stderr for privileged processes.
Change-Id: I8b085ea6597710ac4c1a3c93f1bf8b81eecb08c0
This adds __libc_fatal, cleans up the internal logging code a bit more,
and switches suitable callers over to __libc_fatal. In addition to logging,
__libc_fatal stashes the message somewhere that the debuggerd signal handler
can find it before calling abort.
In the debuggerd signal handler, we pass this address to debuggerd so that
it can come back with ptrace to read the message and present it to the user.
Bug: 8531731
Change-Id: I416ec1da38a8a1b0d0a582ccd7c8aaa681ed4a29
We only need one logging API, and I prefer the one that does no
allocation and is thus safe to use in any context.
Also use O_CLOEXEC when opening the /dev/log files.
Move everything logging-related into one header file.
Change-Id: Ic1e3ea8e9b910dc29df351bff6c0aa4db26fbb58
Still chipping away at the situation where every variable in the
linker was of type 'unsigned'. This patch switches counts over to
being size_t and adds an explicit type for init/fini function pointers
and arrays of function pointers.
Also improve logging from CallArray.
Also remove trailing "\n"s from log messages.
Change-Id: Ie036d2622caac50f4d29f0570888bb527661d77e
