* LP32 should use sa_restorer too. gdb expects this, and future (>= 3.15) x86
kernels will apparently stop supporting the case where SA_RESTORER isn't
set.
* gdb and libunwind care about the exact instruction sequences, so we need to
modify the code slightly in a few cases to match what they're looking for.
* gdb also cares about the exact function names (for some architectures),
so we need to use __restore and __restore_rt rather than __sigreturn and
__rt_sigreturn.
* It's possible that we don't have a VDSO; dl_iterate_phdr shouldn't assume
that getauxval(AT_SYSINFO_EHDR) will return a non-null pointer.
This fixes unwinding through a signal handler in gdb for all architectures.
It doesn't fix libunwind for arm and arm64. I'll keep investigating that...
(cherry picked from commit 36f451a6d93b6807944d99fa23396e039c47e845)
Bug: 17436734
Change-Id: Ic1ea1184db6655c5d96180dc07bcc09628e647cb
This change provides __restore/__restore_rt on x86 and __restore_rt on
x86_64 with unwinding information to be able to unwind through signal
frame via libgcc provided unwinding interface. See comments inlined for
more details.
Also remove the test that had a dependency on
__attribute__((cleanup(foo_cleanup))). It doesn't provide us with any
better test coverage than we have from the newer tests, and it doesn't
work well across a variety architectures (presumably because no one uses
this attribute in the real world).
Tested this on host via bionic-unit-tests-run-on-host on both x86 and
x86-64.
Bug: 17436734
Change-Id: I2f06814e82c8faa732cb4f5648868dc0fd2e5fe4
Signed-off-by: Pavel Chupin <pavel.v.chupin@intel.com>
This change is to migrate the getaddrinfo tests defined in the old file
system/extras/tests/bionic/libc/common/test_getaddrinfo.c
to the new place bionic/tests/netdb_test.cpp.
The test here is more thorough, and catches a bug in getservbyname(3)
that was breaking getaddrinfo(3)'s ability to look up services by name
without a hint that would cause it to ask for a specific protocol.
Change-Id: Ief5ebd0869496d1bc6a97861dfefa04bdf24bab1
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
From the release notes:
Changes affecting future time stamps
Pacific/Fiji will observe DST from 2014-11-02 02:00 to
2015-01-18 03:00. (Thanks to Ken Rylander for the heads-up.)
Guess that future years will use a similar pattern.
A new Zone Pacific/Bougainville, for the part of Papua New
Guinea that plans to switch from UTC+10 to UTC+11 on
2014-12-28 at 02:00. (Thanks to Kiley Walbom for the
heads-up.)
Changes affecting time zone abbreviations
Since Belarus is not changing its clocks even though Moscow
is, the time zone abbreviation in Europe/Minsk is changing
from FET to its more-traditional value MSK on 2014-10-26 at
01:00. (Thanks to Alexander Bokovoy for the heads-up about
Belarus.)
The new abbreviation IDT stands for the pre-1976 use of UT+8
in Indochina, to distinguish it better from ICT (UT+7).
Changes affecting past time stamps
Many time stamps have been corrected for Asia/Ho_Chi_Minh
before 1976 (thanks to Trần Ngọc Quân for an indirect pointer
to Trần Tiến Bình's authoritative book). Asia/Ho_Chi_Minh has
been added to zone1970.tab, to give tzselect users in Vietnam
two choices, since north and south Vietnam disagreed after our
1970 cutoff.
Asia/Phnom_Penh and Asia/Vientiane have been turned into
links, as they differed from existing zones only for older
time stamps. As usual, these changes affect pre-1970 time
stamps only. Their old contents have been moved to the
'backzone' file.
Bug: 18085936
(cherry picked from commit a05c2a2a705c8298154db6665cbbb4dbe3cdbbd5)
Change-Id: If0253cc1515e1bc98e99c6e24eec797836ca7c27
When setting a repeat timer using the SIGEV_THREAD mechanism, it's possible
that the callback can be called after the timer is disarmed or deleted.
This happens because the kernel can generate signals that the timer thread
will continue to handle even after the timer is supposed to be off.
Add two new tests to verify that disarming/deleting doesn't continue to
call the callback.
Modify the repeat test to finish more quickly than before.
Refactor the Counter implementation a bit.
Bug: 18039727
(cherry pick from commit 0724132c3263145f2a667f453a199d313a5b3d9f)
Change-Id: I135726ea4038a47920a6c511708813b1a9996c42
From the release notes:
Changes affecting future time stamps
Pacific/Fiji will observe DST from 2014-11-02 02:00 to
2015-01-18 03:00. (Thanks to Ken Rylander for the heads-up.)
Guess that future years will use a similar pattern.
A new Zone Pacific/Bougainville, for the part of Papua New
Guinea that plans to switch from UTC+10 to UTC+11 on
2014-12-28 at 02:00. (Thanks to Kiley Walbom for the
heads-up.)
Changes affecting time zone abbreviations
Since Belarus is not changing its clocks even though Moscow
is, the time zone abbreviation in Europe/Minsk is changing
from FET to its more-traditional value MSK on 2014-10-26 at
01:00. (Thanks to Alexander Bokovoy for the heads-up about
Belarus.)
The new abbreviation IDT stands for the pre-1976 use of UT+8
in Indochina, to distinguish it better from ICT (UT+7).
Changes affecting past time stamps
Many time stamps have been corrected for Asia/Ho_Chi_Minh
before 1976 (thanks to Trần Ngọc Quân for an indirect pointer
to Trần Tiến Bình's authoritative book). Asia/Ho_Chi_Minh has
been added to zone1970.tab, to give tzselect users in Vietnam
two choices, since north and south Vietnam disagreed after our
1970 cutoff.
Asia/Phnom_Penh and Asia/Vientiane have been turned into
links, as they differed from existing zones only for older
time stamps. As usual, these changes affect pre-1970 time
stamps only. Their old contents have been moved to the
'backzone' file.
Bug: 18085936
Change-Id: I89c065b4788b10ed7530cc4e8cfbc1b65c05c1b7
- Clean up the labels (add .L to make them local).
- Change to using cfi directives.
- Fix unwinding of the __memcpy_chk fail path.
Bug: 18033671
(cherry pick from commit 7123d4371a5e04337b1de5f8cdf6cdc1e08e9cad)
Change-Id: Ife93bcbfc1949ef29fc8e2dc515b7120632b82b1
replace lseek() and use pread() instead
add test for library_fd_offset > file_size case
Bug: 17762003
(cherry picked from commit a6c1279098f24a675d0df74ce1946f5d534b425e)
Change-Id: Ie117c745081ee33d07db5341115ff6c8e98b0dec
When setting a repeat timer using the SIGEV_THREAD mechanism, it's possible
that the callback can be called after the timer is disarmed or deleted.
This happens because the kernel can generate signals that the timer thread
will continue to handle even after the timer is supposed to be off.
Add two new tests to verify that disarming/deleting doesn't continue to
call the callback.
Modify the repeat test to finish more quickly than before.
Refactor the Counter implementation a bit.
Bug: 18039727
Change-Id: I73192c915cdacf608521b1792c54e5af14a34907
replace lseek() and use pread() instead
add test for library_fd_offset > file_size case
Bug: 17762003
Change-Id: I4555f0be635124efe849c1f226985bcba72ffcbd
Unless we completely redo how we build bionic (so that the object
files for libc.so get built separately from libc.a), we can't enable
ASAN here, as libc.a gets linked into static executables.
Change-Id: I2ce4f51248bd51c4213a555ff481b6faabbf53f8
We were missing that using directive when including <atomic>.
Bug:17736764
Change-Id: Ie8ca92a952749415567bcd5fa21d56629a364660
(cherry picked from commit 76ac4d0853c3bba0c65edc98a9cdf932c452e252)
- Clean up the labels (add .L to make them local).
- Change to using cfi directives.
- Fix unwinding of the __memcpy_chk fail path.
Bug: 18033671
Change-Id: I12845f10c7ce5e6699c15c558bda64c83f6a392a
Any pre-C++11 clients of stdatomic.h that use libc++ are being forced
over to <atomic>, which they don't have the language support to use.
Change-Id: I62445c1f2541410a1569498c09433c7196635537
All we're actually interested in is the unwinder. Since that's now a
separate library, just use that.
Change-Id: If86071a0d850da961336a58147b70369ace7bd12
Add the missing prototypes, fix the existing prototypes to use clockid_t
rather than int, fix clock_nanosleep's failure behavior, and add simple
tests.
Bug: 17644443
Bug: https://code.google.com/p/android/issues/detail?id=77372
Change-Id: I03fba369939403918abcabae9551a7123953d780
Signed-off-by: Haruki Hasegawa <h6a.h4i.0@gmail.com>
The mallinfo usmblks value returned by dlmalloc is a little misleading.
It's not the current max, it's the historical high water mark. This
leads to dumpsys meminfo producing native memory numbers that don't add up.
Change this to the real total footprint, not this high water mark.
Bug: 17265653
(cherry pick from commit f4ada9c9ce31c7e56146a4cb703747385bc043a5)
Change-Id: I2fba10285859dccfe8331063c9be14cc169f2d91
The mallinfo usmblks value returned by dlmalloc is a little misleading.
It's not the current max, it's the historical high water mark. This
leads to dumpsys meminfo producing native memory numbers that don't add up.
Change this to the real total footprint, not this high water mark.
Bug: 17265653
Change-Id: Id0293a1b50c9b0be8795405049f537a51ab0e8b7
