From aba8070ca2dbb941788a5f5eea714e3cf8a44b65 Mon Sep 17 00:00:00 2001
From: yourname <your_email@example.com>
Date: Mon, 21 Mar 2016 10:16:58 -0700
Subject: [PATCH] USB and other regulators removed from dtsi, PCIE reset pin
 corrected

---
 arch/arm/boot/dts/imx6qdl-openrex.dtsi | 51 +-------------------------
 1 file changed, 1 insertion(+), 50 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-openrex.dtsi b/arch/arm/boot/dts/imx6qdl-openrex.dtsi
index e0429d59..955d0e77 100644
--- a/arch/arm/boot/dts/imx6qdl-openrex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-openrex.dtsi
@@ -34,52 +34,6 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		reg_usb_otg_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 29 0>;
-			enable-active-high;
-		};
-
-		reg_audio: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "wm8962-supply";
-			gpio = <&gpio4 10 0>;
-			enable-active-high;
-		};
-
-		reg_mipi_dsi_pwr_on: mipi_dsi_pwr_on {
-			compatible = "regulator-fixed";
-			regulator-name = "mipi_dsi_pwr_on";
-			gpio = <&gpio6 14 0>;
-			enable-active-high;
-		};
-
-		reg_sensor: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "sensor-supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 31 0>;
-			startup-delay-us = <500>;
-			enable-active-high;
-		};
 	};
 
 	gpio-keys {
@@ -434,8 +388,7 @@
 };
 
 &pcie {
-	power-on-gpio = <&gpio3 19 0>;
-	reset-gpio = <&gpio7 12 0>;
+	reset-gpio = <&gpio4 15 0>;
 	status = "disabled";
 };
 
@@ -457,12 +410,10 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
 &usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;